How to get pt 9 in paragraph format in sap script

Hi,
I have a requirement to bold the data in output screen in main window,But that paragraph format font size is 9.0 pt if in font tab i select bold radio button then its comming bold in output screen some cases but some cases its not happening.So if i take font size - 8.0 pt then its bold happening for all cases.
but i cannot put 8.0 pt because it is very old paragraph format so in pt 9.0 only i want bold.any body can help me for that.
Thanks,

Hi madhurao123 ,
Thank u so much.
I have configured the device type as pdf printer.
And Now I can able to get the PDF File downloaded.
Thanks
Alagappan

Similar Messages

Regarding Paragraph format in SAP Script

Hi SAP Gurus,
Can any one please tell me the use of TABS in paragraph formats in SAP Script.
Thanks & Regards,
Pavan Bandaru.

Hi
first you define you tab in paragraph formats.
whene you must use this pharagraps you
just insert double comma before the text.
,,&matnr&
attention because if you define more than a tabulator il will take the tabulator in sequence.
,,(1st tab)&matnr&,,(2nd tab)&matnr&
if i define a tabulator of 2cm and another of 3cm and you insert 4 comma
,,,,&matnr&
it will take the summ of the two tabulator.

How to get a report in pdf format.

Hi Experts,
Could any one let me know that, how to get the report in PDF format.
Once a report is generated it should be displayed in pdf format or downloaded in pdf format.
Thanks in Advance,
Regards,
Irfan Hussain

Hi,
Check out this code:
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
 DEFAULT '[email protected]',
 p_sender LIKE somlreci1-receiver
 DEFAULT '[email protected]',
 p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
 INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
 wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
 gd_eventparm LIKE tbtcm-eventparm,
 gd_external_program_active LIKE tbtcm-xpgactive,
 gd_jobcount LIKE tbtcm-jobcount,
 gd_jobname LIKE tbtcm-jobname,
 gd_stepcount LIKE tbtcm-stepcount,
 gd_error TYPE sy-subrc,
 gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
 it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 gd_sender_type LIKE soextreci1-adr_typ,
 gd_attachment_desc TYPE so_obj_nam,
 gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
 gd_destination LIKE rlgrap-filename,
 gd_bytecount LIKE tst01-dsize,
 gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
 INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
 c_no(1) TYPE c VALUE ' ',
 c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
 PERFORM get_job_details.
 PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
* to sap-spool
* spool parameters %_print
* archive parameters %_print
* without spool dynpro
* and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
 PERFORM convert_spool_to_pdf.
 if p_delspl EQ 'X'.
 PERFORM delete_spool.
 endif.
 IF sy-sysid = c_dev.
 wait up to 5 seconds.
 SUBMIT rsconn01 WITH mode = 'INT'
 WITH output = 'X'
 AND RETURN.
 ENDIF.
ELSE.
 SKIP.
 WRITE:/ 'Program must be executed in background in-order for spool',
 'request to be created.'.
ENDIF.
* FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
 INTO TABLE it_tbtcp
 WHERE jobname = gd_jobname
 AND jobcount = gd_jobcount
 AND stepcount = gd_stepcount
 AND listident <> '0000000000'
 ORDER BY jobname
 jobcount
 stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
 message s004(zdd) with gd_spool_nr.
 gd_spool_nr = wa_tbtcp-listident.
 MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
 MESSAGE s005(zdd).
ENDIF.
ENDFORM.
* FORM get_job_details *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
 IMPORTING
 eventid = gd_eventid
 eventparm = gd_eventparm
 external_program_active = gd_external_program_active
 jobcount = gd_jobcount
 jobname = gd_jobname
 stepcount = gd_stepcount
 EXCEPTIONS
 no_runtime_info = 1
 OTHERS = 2.
ENDFORM.
* FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 src_spoolid = gd_spool_nr
 no_dialog = c_no
 dst_device = c_device
 IMPORTING
 pdf_bytecount = gd_bytecount
 TABLES
 pdf = it_pdf_output
 EXCEPTIONS
 err_no_abap_spooljob = 1
 err_no_spooljob = 2
 err_no_permission = 3
 err_conv_not_possible = 4
 err_bad_destdevice = 5
 user_cancelled = 6
 err_spoolerror = 7
 err_temseerror = 8
 err_btcjob_open_failed = 9
 err_btcjob_submit_failed = 10
 err_btcjob_close_failed = 11
 OTHERS = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
 TRANSLATE it_pdf_output USING ' ~'.
 CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
 it_mess_att = gd_buffer.
 APPEND it_mess_att.
 SHIFT gd_buffer LEFT BY 255 PLACES.
 IF gd_buffer IS INITIAL.
 EXIT.
 ENDIF.
ENDDO.
ENDFORM.
* FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
 EXPORTING
 spoolid = ld_spool_nr.
ENDFORM.
Regards,
Gayathri

How to print the text in points wise in sap script

hi friends,
how to print the text in points wise in sap script.
ex: if suppose paragraph consists of 15 lines. then according to one sentence or one fullstop (.) it should give point 1. like that...
1. hai how ru.
2. what r u doing.
3.where r u.
like this i want numbering.. waiting for ur replys.
thanks,
kiran

declare a counter
data : cnt type char 4.
print :
cnt = cnt + 1.
&cnt& &text&
cnt = cnt + 1. and so on.
or.
if the data is in an internal table
loop at internal_table.
cnt = cnt + 1.
write form.
in script -&cnt& &text&
endloop.
Edited by: NIKHILKUMAR POOJARI on Nov 17, 2008 11:18 AM

Subject: How to get MB5B report in excel format

Dear experts,
Please help me how I get automatically MB5B Report in excel format. In Layout there is no option to convert excel format.
regards,
rss
Edited by: rs_sharma on Jun 26, 2011 10:16 AM

Dear experts,
Please help me how I get automatically MB5B Report in excel format. In Layout there is no option to convert excel format.
regards,
rss
Edited by: rs_sharma on Jun 26, 2011 10:16 AM

How to get Report Output in csv format

Hi,
How can i get report Output in csv format, can any one tell me the word used for output type to get output in csv format.
i have used XLS output type but it opens in excel format.
conc.addLayout(appCode,concReqCode,"en-US","US",XLS);
Thanks
Babu

Hi Babu,
Till now in xmlpublisher there is no method to create file in csv format ,you have to create Excel file and then save it in .csv format.Unless and until ur using BI Publisher in which some work around are possible.
Thanks

How to get an international English date format if I'm in a country where the date format is something else?

I'm physically in Malaysia and my iPad sets Malay as my default time format setting. How to get rid of the whole thing of using Malay as my date format and use English as default for everything including date and time ? Under setting> general > international, I have to choose something and English is not an option.

You need to choose an English-speaking country - I have Settings > General > International > Region Format set to United Kingdom (as I'm in the UK), so the first day of the week is monday and times are of the format 01:23 etc (there also options for US, Canada, Australia etc)

How to get AWR report in text format

Hi all,
Here we are getting AWR report in html format through OEM.I want to get AWR report in .txt format
Please help me
Thanks in advance

Hi
You can use the following scripts:
- ORACLE_HOME/rdbms/admin/awrrpt.sql
- ORACLE_HOME/rdbms/admin/awrrpti.sql
HTH
Chris

How to get the output in .xls format instead of .csv.

Dear All,
I have added a exportButton on a table through personlization, when I click on the button it is opening in .csv instead of .xls file .
Please let me know if I can change the format of that to .xls .
Regards
Karan deep.

Hi,
I tried that but I am not able to get the outplut in .xls format .......I think "export all rows" property is used to export all the rows of the particular table "VO attached to it".....I dont think that this property has any control of file format....

In fnd_request.add_layout how to get the layout in EXCEL Format

Hi All,
After applying the patch (5688014), in WSH_DOCUMENT_SETS package fnd_request.add_layout is getting called as below. I am getting the output in PDF format, when called from Document sets.
But my requirement is i want the report to be in EXCEL Format. Is there any other patch is available to get the report in EXCEL when called from Document Sets/ Or any other alternative solutions to acheive this..
Can any body help me on this...
l_print_pdf := 'N';
IF(l_output_file_type = 'XML' ) THEN
IF l_debug_on THEN
WSH_DEBUG_SV.logmsg(l_module_name, 'template' || l_template_code);
END IF;
IF (l_template_code is not NULL) then
IF l_nls_lang.COUNT <> 0 THEN
select iso_language,iso_territory into l_language, l_territory
from fnd_languages
where language_code = l_nls_lang(l_nls_count).lang_code;
ELSE
select iso_language,iso_territory into l_language, l_territory
from fnd_languages
where language_code = userenv('LANG');
END IF;
IF l_debug_on THEN
WSH_DEBUG_SV.logmsg(l_module_name, ' language ' || l_language || ', territory ' || l_territory);
END IF;
l_ret_status :=fnd_request.add_layout(l_appl_short_name,
l_template_code,
l_language,
l_territory,
'PDF');
IF l_ret_status THEN
l_print_pdf := 'Y';
ELSE
IF l_debug_on THEN
WSH_DEBUG_SV.logmsg(l_module_name, 'Error returning from fnd_request.add_layout :'||x_return_status);
END IF;
wsh_util_core.add_message(x_return_status);
END IF;
ELSE
IF l_debug_on THEN
WSH_DEBUG_SV.logmsg(l_module_name, 'No template was specified for this report. Hence could not generate the pdf output' );
END IF;
fnd_message.set_name('WSH', 'WSH_NO_DEFAULT_TEMPLATE');
fnd_message.set_token('CONC_PROG_NAME', document.user_concurrent_program_name);
x_return_status := wsh_util_core.g_ret_sts_error;
wsh_util_core.add_message(x_return_status);
END IF; --} If template_code is not null
END IF; --} If l_output_file_type = 'XML'
Thanks in Advance..

Hi,
I tried your approach and got the following error..
------------- 1) PUBLISH -------------
Beginning post-processing of request 14808954 on node FAHQSNA09SFTD07 at 24-JAN-2012 04:13:08.
Post-processing of request 14808954 failed at 24-JAN-2012 04:13:09 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT -------------
Not printing the output of this request because post-processing failed.
After analysing the log i found there is some issue in OPP Service log.
Below is the service log error..
It says there is 'No corresponding LOB data found' in below query
SELECT l.file_data file_data, DBMS_LOB.getlength (l.file_data) file_length,
l.LANGUAGE LANGUAGE, l.territory territory,
b.default_language default_language,
b.default_territory default_territory,
b.template_type_code template_type_code,
b.use_alias_table use_alias_table, b.start_date start_date,
b.end_date end_date, b.template_status template_status,
b.use_alias_table use_alias_table,
b.ds_app_short_name ds_app_short_name,
b.data_source_code data_source_code, l.lob_type lob_type
FROM xdo_lobs l, xdo_templates_b b
WHERE l.application_short_name = :1
AND l.lob_code = :2
AND l.application_short_name = b.application_short_name
AND l.lob_code = b.template_code
AND (l.lob_type = 'TEMPLATE' OR l.lob_type = 'MLS_TEMPLATE')
AND ( (l.LANGUAGE = :3 AND l.territory = :4)
OR (l.LANGUAGE = :5 AND l.territory = :6)
OR ( l.LANGUAGE = b.default_language
AND l.territory = b.default_territory
But i see the data for this query.
Please let us know is there any setups that needs to be done to achieve this..
below is the OPP log error...
Thanks in Advance.
[1/24/12 4:13:09 AM] [710131:RT14808954] Executing post-processing actions for request 14808954.
[1/24/12 4:13:09 AM] [710131:RT14808954] Starting XML Publisher post-processing action.
[1/24/12 4:13:09 AM] [710131:RT14808954]
Template code: EMP_DETAILS
Template app: EMP_DETAILS
Language: en
Territory: US
Output type: EXCEL
[1/24/12 4:13:09 AM] [UNEXPECTED] [710131:RT14808954] java.sql.SQLException: No corresponding LOB data found :SELECT L.FILE_DATA FILE_DATA,DBMS_LOB.GETLENGTH(L.FILE_DATA) FILE_LENGTH, L.LANGUAGE LANGUAGE, L.TERRITORY TERRITORY, B.DEFAULT_LANGUAGE DEFAULT_LANGUAGE, B.DEFAULT_TERRITORY DEFAULT_TERRITORY,B.TEMPLATE_TYPE_CODE TEMPLATE_TYPE_CODE, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.START_DATE START_DATE, B.END_DATE END_DATE, B.TEMPLATE_STATUS TEMPLATE_STATUS, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.DS_APP_SHORT_NAME DS_APP_SHORT_NAME, B.DATA_SOURCE_CODE DATA_SOURCE_CODE, L.LOB_TYPE LOB_TYPE FROM XDO_LOBS L, XDO_TEMPLATES_B B WHERE L.APPLICATION_SHORT_NAME= :1 AND L.LOB_CODE = :2 AND L.APPLICATION_SHORT_NAME = B.APPLICATION_SHORT_NAME AND L.LOB_CODE = B.TEMPLATE_CODE AND (L.LOB_TYPE = 'TEMPLATE' OR L.LOB_TYPE = 'MLS_TEMPLATE') AND ( (L.LANGUAGE = :3 AND L.TERRITORY = :4) OR (L.LANGUAGE = :5 AND L.TERRITORY = :6) OR (L.LANGUAGE= B.DEFAULT_LANGUAGE AND L.TERRITORY= B.DEFAULT_TERRITORY ))
 at oracle.apps.xdo.oa.schema.server.TemplateInputStream.initStream(TemplateInputStream.java:402)
 at oracle.apps.xdo.oa.schema.server.TemplateInputStream.<init>(TemplateInputStream.java:235)
 at oracle.apps.xdo.oa.schema.server.TemplateHelper.getTemplateFile(TemplateHelper.java:1163)
 at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3450)
 at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3547)
 at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:290)
 at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)

How to get ORA errors in alertlog file using shell script.

Hi,
Can anyone tell me how to get all ORA errors between two particular times in an alertlog file using shell script.
Thanks

Hi,
You can define the alert log as an external table, and extract messages with SQL, very cool:
http://www.dba-oracle.com/t_oracle_alert_log_sql_external_tables.htm
If you want to write a shell script to scan the alert log, see here:
http://www.rampant-books.com/book_2007_1_shell_scripting.htm
#!/bin/ksh
# log monitoring script
# report all errors (and specific warnings) in the alert log
# which have occurred since the date
# and time in last_alerttime_$ORACLE_SID.txt
# parameters:
# 1) ORACLE_SID
# 2) optional alert exclusion file [default = alert_logmon.excl]
# exclude file format:
# error_number error_number
# error_number ...
# i.e. a string of numbers with the ORA- and any leading zeroes that appear
# e.g. (NB the examples are NOT normally excluded)
# ORA-07552 ORA-08006 ORA-12819
# ORA-01555 ORA-07553
BASEDIR=$(dirname $0)
if [ $# -lt 1 ]; then
echo "usage: $(basename) ORACLE_SID [exclude file]"
exit -1
fi
export ORACLE_SID=$1
if [ ! -z "$2" ]; then
EXCLFILE=$2
else
EXCLFILE=$BASEDIR/alert_logmon.excl
fi
LASTALERT=$BASEDIR/last_alerttime_$ORACLE_SID.txt
if [ ! -f $EXCLFILE ]; then
echo "alert exclusion ($EXCLFILE) file not found!"
exit -1
fi
# establish alert file location
export ORAENV_ASK=NO
export PATH=$PATH:/usr/local/bin
. oraenv
DPATH=`sqlplus -s "/ as sysdba" <<!EOF
set pages 0
set lines 160
set verify off
set feedback off
select replace(value,'?','$ORACLE_HOME')
from v\\\$parameter
where name = 'background_dump_dest';
!EOF
`
if [ ! -d "$DPATH" ]; then
echo "Script Error - bdump path found as $DPATH"
exit -1
fi
ALOG=${DPATH}/alert_${ORACLE_SID}.log
# now create awk file
cat > $BASEDIR/awkfile.awk<<!EOF
BEGIN {
# first get excluded error list
excldata="";
while (getline < "$EXCLFILE" > 0)
{ excldata=excldata " " \$0; }
print excldata
# get time of last error
if (getline < "$LASTALERT" < 1)
{ olddate = "00000000 00:00:00" }
else
{ olddate=\$0; }
errct = 0; errfound = 0;
{ if ( \$0 ~ /Sun/ || /Mon/ || /Tue/ || /Wed/ || /Thu/ || /Fri/ || /Sat/ )
{ if (dtconv(\$3, \$2, \$5, \$4) <= olddate)
{ # get next record from file
next; # get next record from file
# here we are now processing errors
OLDLINE=\$0; # store date, possibly of error, or else to be discarded
while (getline > 0)
{ if (\$0 ~ /Sun/ || /Mon/ || /Tue/ || /Wed/ || /Thu/ || /Fri/ || /Sat/ )
{ if (errfound > 0)
{ printf ("%s ",OLDLINE); }
OLDLINE = \$0; # no error, clear and start again
errfound = 0;
# save the date for next run
olddate = dtconv(\$3, \$2, \$5, \$4);
continue;
OLDLINE = sprintf("%s %s",OLDLINE,\$0);
if ( \$0 ~ /ORA-/ || /[Ff]uzzy/ )
{ # extract the error
errloc=index(\$0,"ORA-")
if (errloc > 0)
{ oraerr=substr(\$0,errloc);
if (index(oraerr,":") < 1)
{ oraloc2=index(oraerr," ") }
else
{ oraloc2=index(oraerr,":") }
oraloc2=oraloc2-1;
oraerr=substr(oraerr,1,oraloc2);
if (index(excldata,oraerr) < 1)
{ errfound = errfound +1; }
else # treat fuzzy as errors
{ errfound = errfound +1; }
END {
if (errfound > 0)
{ printf ("%s ",OLDLINE); }
print olddate > "$LASTALERT";
function dtconv (dd, mon, yyyy, tim, sortdate) {
mth=index("JanFebMarAprMayJunJulAugSepOctNovDec",mon);
if (mth < 1)
{ return "00000000 00:00:00" };
# now get month number - make to complete multiple of three and divide
mth=(mth+2)/3;
sortdate=sprintf("%04d%02d%02d %s",yyyy,mth,dd,tim);
return sortdate;
!EOF
ERRMESS=$(nawk -f $BASEDIR/awkfile.awk $ALOG)
ERRCT=$(echo $ERRMESS|awk 'BEGIN {RS=" "} END {print NR}')
rm $LASTALERT
if [ $ERRCT -gt 1 ]; then
echo "$ERRCT Errors Found \n"
echo "$ERRMESS"|nawk 'BEGIN {FS=" "}{for (i=1;NF>=i;i++) {print $i}}'
exit 2
fi

How to get inper and fpper without seqnr in SAP ABAP HR

Hi,
I'm writing a program to read payroll results from a flat file and need to upload into a ZTABLE i.e., custom table with RT structure. The file does not have seqnr or inper or fpper. Can you please tell me how to get the inper and fpper without seqnr? Is there anyway we can do that?
Thanks in advance!

Hi Abby,
This flat file you are receiving the pay info from....how can you tell which pay periiod it is drawing data from? The INPER-In Pay Period and FPPER-For Pay Period tell you what pay period is involved. For example, an employee turned in some of his hours worked late. The pay this week includes pay for this week plus pay for last week. So pay in Period 37/2009 (INPER) includes some pay from period 36/2009 (FPPER). Thus, you would need to have these differentiated by the sequence number. If you did not know that, you just have a lump sum earning from the flat file with no way to differentiate.
You did not say you were using SAP Payroll, but if you are, suggest you use some of the standard reports - such as Wage Type Reporter or Payroll Reconciliation Report. If you are creating your own ABAP Program, use the payroll function modules such as pyxx_read_payroll_result. These all look at the payroll clusters and extract the data in a readable format.
Paul

How to get the database owner name in T-SQL script

Hello, All!
I want to get the database ower name (in format DOMAIN\user) by through T-SQL script. But SELECT * FROM sys.databases returns only owner_sid.
Please show me a way - how to get the owner name, if you have only owner_sid. Or, may be, somebody know another way ?
Andy Mishechkin

SELECT suser_sname( owner_sid ), * FROM sys.databases
http://www.t-sql.ru

How to change the format in sap script

Hi,
I am working on a report which calls a sap script and i have to modify the script i.e. the values which are displaying in it. i had never worked on SAP SCRIPTS ,plzz provide me guidlines how to change the format of the data displayed in it.

hi,
this will give you the whole idea about the scripts in SAP the t-code is SE71.
refer this link::
[SAP SCRIPTS|http://help.sap.com/saphelp_40b/helpdata/en/d6/0dc169494511d182b70000e829fbfe/applet.htm]
[WIKI|https://wiki.sdn.sap.com/wiki/display/ABAP/FormPrinting-SAPscript%2CSmartforms]
regards
sarves
Edited by: Sarves Sombhatla on Feb 20, 2009 1:38 PM

How to get query response time from ST03 via a script ?

Hello People,
I am trying to get average query response time for BW queries with a script (for monitoring/historisation).
I know that this data can be found manually in ST03n in the "BI workload'.
However, I don't know how to get this stat from a script.
My idea is to run a SQL query to get this information, here is the state of my query :
select count(*) from sapbw.rsddstat_olap
where calday = 20140401
and (eventid = 3100 or eventid = 3010)
and steptp = 'BEX3'
The problem is that this query is not returning the same number of navigations as the number shown in ST03n.
Can you help me to set the correct filters to get the same number of navigation as in ST03n ?
Regards.

Hi Experts,
Do you have ideas for this SQL query ?
Regards.

How to get pt 9 in paragraph format in sap script

Similar Messages

Maybe you are looking for