How to get response of an Async Service in XI

Hi all,
I have a scenario where i am invoking an async webservice. I need to get the response of the webservice in the R/3 through XI. Can any body please suggest how to do that?
Just to share more info, The web service writes its response into a particular port. So if i need to listen to that port, how can i do that?
Thanks and best regards,
Kulwant Singh

Hi, On R/3 side you need to use Proxy or RFC/ BAPI.
For Proxy configuration refer
ABAP Proxy Runtime
http://help.sap.com/saphelp_nw04s/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm
Setting Up Point-to-Point Connections with proxy
http://help.sap.com/saphelp_nw04s/helpdata/en/85/78af1bf407434796aaf8dbd6d4e7b7/frameset.htm
Reliable Messaging EOIO in ABAP Proxies
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3dfac358-0d01-0010-5598-d4900e81a30c
RFC/BAPI Communication
http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm
Configuring the Sender RFC Adapter - step by step
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
sap to webservice
/people/siva.maranani/blog/2005/05/23/communication-between-sap-system-webservice-using-proxies
Thanks
Swarup

Similar Messages

How to get the version no. for service po?

Hi,
How to get the version no. for service po?For material po we are getting the version from EKKO-REVNO but for service po Ekko-revno is blank.
Regards,
Rachel.

Hiee,
It is not like service PO does not have revision.
REVNO will only exists for any document if amendment is made after releasing it. If in EKKO for all service PO revision number is blank then test if version management is active for document type
MM->Purchasing->Version management -> External documents
Here check for your doc type and purchase org version management is active.
Regs,
Appie

How to get response from such a function

How to get response from such a function (in MODULE USER_COMMAND_0010 INPUT I get "ODGOVOR" 'X'
FUNCTION Z_SEENKRAT.
""Local Interface:
*" EXPORTING
*"     REFERENCE(ODGOVOR) TYPE MSEG-KZEAR
DATA ok_code LIKE sy-ucomm.
DATA: test like mseg-kzear.
BREAK-POINT.
call screen 10.
test = ODGOVOR.
ENDFUNCTION.
*&      Module CLEAR_OK_CODE OUTPUT
      text
MODULE clear_ok_code OUTPUT.
CLEAR ok_code.
ENDMODULE.                 " CLEAR_OK_CODE OUTPUT
*&      Module USER_COMMAND_0010 INPUT
      text
MODULE USER_COMMAND_0010 INPUT.
DATA odgovor LIKE mseg-KZEAR.
CASE ok_code.
    WHEN 'DA'.
    ODGOVOR = 'X'.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0010 INPUT

Hi,
You need to declare the ODGOVOR variable in the TOP include, then you will get the value
Regards
Sudheer

How to get Contract Account Number in Service Ticket

Hi Experts,
How to get Contract account number in Service Ticket, we are working in ISU environment. when i create the service ticket the contract account number is there in Business agreement number field in service tiket.
Can anyone tell me how to retrieve that field.
Answer will be appreciated.
Praveen

check tables tfk_buag_ref and fkkvkp

How to get in touch with customer service?

How to get in touch with customer service? Twice I had a chat and I would get an answer in a few days. Never heard a thing! I need an invoice for my book-keeping but I can't download it. It says: get in touch with the customer service. But I chatted for 2 times, tried to phone, They won't answer the phone. Where is the customer service!!!!!!!!!

Hi Regine43b,
Please refer to the following link for help with your monthly invoice: http://helpx.adobe.com/x-productkb/policy-pricing/print-creative-cloud-receipt.html
If in case you still face issues, please contact support @ https://helpx.adobe.com/contact
Regards,
Sheena.

Does anyone know how to get ahold of Adobe customer service?

does anyone know how to get ahold of Adobe customer service?

i guess i really want to get ahold of someone in charge of our area because after the last hole month of being treated like a dog by them and being told they don't care I'm just willing to go to any lengths to see a company like that is not successful I'm a business owner to actually several businesses and your customers are the only reason your there but you can never forget about the little people verizon

How to get, handle and check web service response?

Hello All!
We test web services and try to use e-Tester for this.
We have some problems with validation of service response. Maybe somebody can help or advice us?
Service method returns the list of Cards (total is about 300 items) with attributes.
Below is the sample of one card properties.
- <Cards>
- <UserCard>
- <characteristics>
- <item>
<Name>ARM</Name>
<Value>78</Value>
</item>
- <item>
<Name>BAT</Name>
<Value>40</Value>
</item>
- <item>
<Name>SPD</Name>
<Value>30</Value>
</item>
- <item>
<Name>STR</Name>
<Value>40</Value>
</item>
</characteristics>
<ID>1</ID>
<FirstName>A.J.</FirstName>
<LastName>Burnett</LastName>
<PlayerName>A.J. Burnett</PlayerName>
- <Team>
<Name>Blue Jays</Name>
<City>Toronto</City>
</Team>
<cardid>1</cardid>
- <Flags>
<IsFavorite>false</IsFavorite>
<IsForPosters>false</IsForPosters>
<IsForTrade>false</IsForTrade>
<IsToppCard>false</IsToppCard>
</Flags>
<Count>0</Count>
</UserCard>
+ <UserCard>
+ <UserCard>
+ <UserCard>
In one test case we need to check the state of Count property (0 or 1) for all cards, count the quantity of cards with Count=1 and check that it equals to 8.
So the question is how to get the service request to the VBA for analyzing and verification?
Thanks a lot!

Have any other ideas?

How to get response from an asynchronous BPEL process in Java

I'm experimenting with BPEL and doesn't seem to be able to get response from an asynchronous BPEL process. Here's the deal:
I have a BPEL process that takes a string as input, and gives another string as output. This is a asyncronous process.
I want to initiate this BPEL process as a web service so I generate a Webservice Proxy in JDeveloper 10g (10.1.3.0.4). The function to call the process is now called "initiate" and takes three arguments: the input string, a "org.xmlsoap.schemas.ws._2003._03.addressing.EndpointReferenceType replyTo" and a
"org.xmlsoap.schemas.ws._2003._03.addressing.AttributedURI messageID".
HTTP-Analyzer shows that invoking the BPEL process with initiate("somestring", null, null) results in sending a SOAP message to the BPEL process, which returns a "202 Accepted". How do I get the response from the process? My intuition tells me that I have to use that second argument, that EnpointReferenceType thing. How do I use that?
Another question: If a asynchronous BPEL process does not exists (so the endpoint does not exist) the Java proxy does not throw an error when runned. It does not even sends a message. It exits with status 0! (This happens for example when deploying a new version of a process and when the "old" version is undeployed). Calling a non-existing synchronous BPEL process, the Java proxy DOES throw an error.

Clemens,
That all sounds logical. But somehow it is still a mystery for me ... Somehow I don't see what should be done.
To call the async BPEL process I have the following procedure:
initiate(String input, org.xmlsoap.schemas.ws._2003._03.addressing.EndpointReferenceType replyTo, org.xmlsoap.schemas.ws._2003._03.addressing.AttributedURI messageID)
The first argument is the input for my BPEL process. The second is the address to a webservice that should handle the callback, right? The third is a messageID (makes sense, but why of the type AttributedURI?).
Here lies my problem. It is not clear to me how these EndpointReferenceType & AttributedURI work. I can't find anything on the net about it. The AXIS examples as where mentioned earlier use other types (namely the "org.xmlsoap.schemas.ws.addressing.MessageID" and "org.xmlsoap.schemas.ws.addressing.ReplyTo") which are completely different.
What I did so far:
- I created an webservice proxy that listens on the onResult endpoint of the BPEL process.
- I created an webservice proxy that calls the BPEL process through the initiate procedure, but it is not completely clear to me how to construct the EndPointreferenceType replyTo, and the MessageID. I did something like this:
EndpointReferenceType replyTo = new EndpointReferenceType();
// callback service running on local machine
// This URI class is the java.net's version
URI replyToURI = new URI("http://vaccinatie:8988/syncro-callback-context-root/stringconcatCallbackBindingPort");
// This AttributedURI is the org.xmlsoap.schemas.ws._2003._03.addressing's version
AttributedURI address = new AttributedURI();
// the only public methos that made sense to me:
address.set_value(replyToURI);
replyTo.setAddress(address);
// call the BPEL process
myPort.initiate("test123", replyTo, address);
But the above doesn't work (largely because I don't know what I'm doing here prob.:-) ) It does send the "test123" message, and the BPEL process does process it, but I don't seem to get the callback right.
I hope this makes my problems somewhat clearer. I hope someone can help me, because I'm just a beginner in this whole "web service area" and seems to do something terribly wrong here, because it should be very simple. Thx.

How to get rid of the bonjour service?

As I'm using the iTunes only on a single PC I want to get rid of the bonjour service. Anyone can tell me how to get it permanently removed on an W2k system and is it for sure that the CDDB requests have nothing to do with it so they are still working fine?

Just disable it.
Desktop > My Computer > right-click > Manage
expand Service and Application > highlight Services
Find the Bonjour service in the list on the right.
Double-click, and change the Startup type from Automatic to either Manual or Disabled
Then press Apply button
You can also press the stop button if Bonjour is currently running
[EDIT: Yes, CDDB will still work.]

How to get the IObject from the service order number

Hi Experts,
I am implementing the CRM_ORDER_STATUS Badi, in that I am getting the Service Order number but I want to get the IObject number, how to get it, which FM to use or any other table.
Please let me know.
Thanks in Advance for your help,
Praveen

Hi Praveen,
In the interface of the badi methods there is import parameter IS_STATUS_WRK with the field GUID
use that one to call FM CRM_ORDER_READ with that GUID (check if the GUID is for ORDER by using update saved trnsaction).
in the export parameter ET_ORDERADM_H you will find the object id (only after save unless it was customizing different)
Amit.

How to get Request Offering from given Service Offering using Service Manager SDK?

Recently, I am working on application where I have to fetch all Request Offering from given Service Offering.
I can retrieve all Request Offering using following method of SM SDK :
var requestOfferings = group.Extensions.Retrieve<RequestOffering>();// group is Management Group
But I am unable to get request Offering from given Service Offering as I am new to this platform. I have searched in web but can not find solution to this problem.
It would be great if someone guide for this problem or give me any suggestion related to this problem.
Thanks in advance.

RequestOfferings are handled a little differently in the SDK, but fortunately, they're still backed by standard EnterpriseManagementObjects..it just takes a little work to get them.
There are a few ways you can go about getting a request offering's related service offerings. I'm going to show you the relationship route, but you could also use a type projection to achieve the same goal.
In your original post, you're simply retrieving _all_ request offerings..that's fine. If you wanted to retrieve a single request offering (as I do in my example) you need to find the request offering's identifier. This identifier is a pipe delimited string
of various values. The quickest way to find it, in my opinion, is to query the MT_System$RequestOffering table in the database, but you can also find it by looping through all the RequestOfferings returned by group.Extensions.Retrieve<RequestOffering>();
Anyway, for the following example to work, you only need your request offering's Identifier and your management server name. (Again, you could simply loop through all of your request offerings and retrieve the service offerings for all of them)
The comments inline with this example should guide you through the steps.
//Connect to the management group and prepare the class and relationship types that we'll need.
String strMySCSMServer = "your server";
EnterpriseManagementGroup emg = new EnterpriseManagementGroup(strMySCSMServer);
ManagementPackClass mpcRO = emg.EntityTypes.GetClass(new Guid("8FC1CD4A-B39E-2879-2BA8-B7036F9D8EE7")); //System.RequestOffering
ManagementPackRelationship relSORelatesToRO = emg.EntityTypes.GetRelationshipClass(new Guid("BE417A55-6622-0FC3-FCEA-90CD23E0FC23")); //System.ServiceOfferingRelatesToRequestOffering
//An example of an extension identifier looks like this:
//1|My.RO.MP|1.0.0.0|Offeringc921c4feujhoi8cdsjloiz352d7gf3k0|3|RequestOffering
String strRequestOfferingIdentifier = "your request offering identifier";
//Retrieve the request offering using an Extension Identifier.
ExtensionIdentifier ei = null;
ExtensionIdentifier.TryParse(strRequestOfferingIdentifier, out ei);
RequestOffering ro = emg.Extensions.Retrieve<RequestOffering>(ei);
//Using the request offering's Identifier, retrieve the enterprise management object that it represents
EnterpriseManagementObjectCriteria emocRO = new EnterpriseManagementObjectCriteria("ID = '" + ro.Identifier + "'", mpcRO);
IObjectReader<EnterpriseManagementObject> orROs = emg.EntityObjects.GetObjectReader<EnterpriseManagementObject>(emocRO, ObjectQueryOptions.Default);
//Since we queried for only a single Request Offering, the object reader should contain 0 or 1 elements.
EnterpriseManagementObject emoRO = null;
if (orROs.Count > 0)
emoRO = orROs.ElementAt(0);
else
Console.WriteLine("No Request Offering found");
//Now, using the relationship type "System.ServiceOfferingRelatesToRequestOffering", get all Service Offering's related to our request offering
IList<EnterpriseManagementRelationshipObject<EnterpriseManagementObject>> lstEMROs = emg.EntityObjects.GetRelationshipObjectsWhereTarget<EnterpriseManagementObject>(emoRO.Id, relSORelatesToRO, DerivedClassTraversalDepth.None, TraversalDepth.OneLevel, ObjectQueryOptions.Default);
//The GetRelationshipObjectsWhereTarget method returns a list of EnterpriseManagementObjectRelationships..These objects represent that relationship between two objects.
//Thus, these relationship objects have two properties of interest; TargetObject and SourceObject. In this case, service offerings are the source of this relationship type and
//so, you can access the service offering object itself by using the relationship object's SourceObject property (which is nothing more than an EnterpriseManagementObject)
foreach (EnterpriseManagementRelationshipObject<EnterpriseManagementObject> emro in lstEMROs)
//emro.SourceObject is your Service Offering object. You can use it for whatever you need from here on out. In this example, i'm just writing out the DisplayName
EnterpriseManagementObject emoServiceOffering = emro.SourceObject;
Console.WriteLine(emoServiceOffering[null, "DisplayName"].Value);
Give it a try, let me know if you have any questions :)

Getting response from a Web Service

Hello, everyone,
I want MII to show the response from a Web Service it is calling through the Web Service action.
But when this Web Service return an error (as a Soap Fault response), MII simply does not show the response. It show it truncated, such as
"<?xml version="1.0" encoding="UTF-8"?>
<ReceiveMessageFromMESResponse xmlns="http://tempuri.org/"/>"
It prevents me from showing the error message to the user.
What can I do to have MII show me the complete response received from the called Web Servce?
Thanks in advance!

Hi, SB!
Yes, this would solve the problem, but it would require changes on already-implemented, working external Web Services, which should be avoided by all means.
SOAP Fault responses are part of the SOAP protocol. I expected MII to understand it.
Thanks a lot for your answer!

How to get response from financial department

How do I get someone in financial to review an account that has bad information in it ? Someone at Verizon has mistakenly used ACH (Bank) information and entered it as debit card information. When they tried to post to it, of course it failed. As a result I am now on COD cash only for the duration of my contract. No person in their financial division or in the regular customer service can seem to correct this. Any suggestions ?

Update - I began a complaint with the BBB.
I also called Verizon again as suggested, and asked for a supervisor again after explaining the situation. For the first time I spoke with someone who not only understood the problem but fixed it by changing the status of my account from cash only to auto payment.
I received a call from an 'Executive correspondent' at Verizon regarding my complaint to the BBB. I related the entire story to her, after which she apologized and assured me she would look into why the original person I spoke with in financial services was unwilling to help, and that the assistant manager at the local store was unable to get help either. I implied that their customer service left a lot to be desired in its present form and, I agreed with her that some investigating needed to be done.
I also asked why Verizon was unable to verify billing information before the actual transaction, as is done by many other corporations - Paypal being one. They will do a small (between .01 and .15) transfer then transfer it back. She informed me that Verizon had made a corporate decision not to do this as it would 'confuse' their customers. I disagree - their current system puts the entire responsibility for any errors on their customer. She confirmed that I had provided the correct information initially and had no explanation for how things turned out as they did.

Reporting In Service Manager 2012 - How To Get A List Of All Service Requests Regardless of Status

Within the Custom Reporting Options available to users of Ssystem Center Service Manager 2012, which would one use to create reports that do not contain any agregated data but are instead detail level info such as a list of all Service Requests reardless
of status? I want to include within the report the same data you see on the main page of a Service Request when you double-click a Service Request within Service Manager and it pops opne the details of the Service Request.
I'm trying to get the following info for each Service Requests
SR ID (i.e. SR1234)
Affected User
Title
Description
Priority
Source
Area
Support Group
Assigned To
Created By and Created On
I know the cubes w/Excel offer a great way to get data for a **piece meal report or for getting agregated data (I.E. counts, sums, avergares, Max's & Mins) but I need a report that has zero totals and no agregations.
Thanks
** A piece meal report is a report that has to be manually pieced together by combining data from others reports and other sources because no single report can be constructed to bring all the data togethere into a single report. If you've ever
worked with an accountant taht uses Excel for everything but who has no idea how SQL or databases in general are deisgned then chances are you've either been asked to create a piece meal report for them and or seen them do one them selves when they open a
spreadshet and dump into it disperate data from a variety of sources and then ask you why you can't automate that same report for them.

the following thread covers some good SQL queries to get details about the Incident Request, just amend them to cover the Service Request
http://social.technet.microsoft.com/Forums/systemcenter/en-US/e703641d-3e05-4df4-be2b-bf9bd62534f8/how-to-generate-incident-report-with-incident-description-field-in-scsm-2012-sp1

How to get responsibility in iProcurement (11.5.9) - OAF 5.6

Hi, We have a requirement to disable some of the fields based on the responsibility. How do I do that in iProcurement (11.5.9) which is based on OAF 5.6. In this release of iProc, UI templates are defined in .xml format which is self service framework
Example for a field:
<POR_USSGL_TC ifFlag = "true" lov = "true">
<if field = "POR_USSGL_TRANSACTION_CODE_ENABLED_FLAG" value = "n" itemStyle = "off" />
</POR_USSGL_TC>
This is how the field definition looks like in the xml file. We can give a condition based on which we can turn off any field.
Please let me know how to solve this issue. Thanks.

Ram Kumar/Tapash, any resolution for this issue. Thanks.

How to get response of an Async Service in XI

Similar Messages

Maybe you are looking for