How to get rid of paragraph breaks in a lengthy text instead of manually

I have imported a large piece of text - it is very narrow and has many paragraph breaks I guess you call it - or return breaks. I started doing it manually but it is a nightmare. Is there an easier way to do it? I snooped around and tried a few things but cannot seem to get this to work. I have a lot more work to do. Thanks again.

Position the mouse pointer after the last printed character of a paragraph. Press the mouse button and hold it while you drag down over several of the empty lines. Release the mouse button. Simultaneously press command+C keys (then release) to copy the selection to the clipboard. Simultaneously press command+F keys (then release) to open the Find&Replace dialog. Click once in the "Find:" window, then press command+V keys (then release) to paste the contents of the clipboard there. Click in the "Replace:" window then press "Return" to enter a single carriage return. Click on the "Replace & Find' button.

Similar Messages

  • How to get rid of jail break so that warranty remains

    can any one teell me if i hv jail break done on my phone and get it restored by itunes and upateded successfully then my warranty reamins or not...

    Yes, we are sure.
    One of the primary reasons, I am always recommending against jailbreak.
    Allan

  • I have very thin, colored lines running vertical on my desktop monitor screen.  I don't know where they come from or how to get rid of them.  I started with one and now have three.  Can anyone give me some insight about what to do in getting rid of them?

    I have very thin, colored lines that have shown up on my IMac monitor screen.  I don't know where they came from or how to get rid of them.  I'm concerned now because I started with one and now have three.  Does any know why this occurs or how to get rid of them?

    I got an address from Applecare, although I can't place my hand on it right now. I didn't bother persuing the letter route myself as I didn't expect much. I know that the location was Cork, Ireland though as that where the UK Applecare is based as far as I'm aware. The best thing to do is to call Applecare (if it's free) and discuss the issue. State that you are not happy wit the fact that you will have to pay to have the problem resolved especiiay if it is an ongoing problem that has not been resolved. I ended up speaking to a senior manager of the Applecare team who then proceeded to tell me about mailing in my grievence to customer services division or something like that.
    If I can find the address I may post it if I'm allowed.
    In the case of age, Schools usually have a 5-year life-cycle as they tend to be used differently than consumer machines, i.e. being used constantly on a daily basis for at least 12 hours with no break. you would expect issues to appear after a few years, but I expect problems that arise through defects to be resolved and stay resolved. As I mentioned we had machines for around 2 years before the lines appeared and sent them to be repaired. I'm happy with that. What I am unhappy about is the fact that the problem has reappeared exactly in the same way and now I'm left with around 7 machines that I either pay loads to repair or, the more likely replace the machines with newer ones since the age is now big enough to warrant the replacement.
    Sorry for the lengthy moan, but these are the reasons I purchased Apple ahrdware in the first place to avoid the "not our problem" stance some PC vendors  usually take, similar to the Dell monitors thread mentioned in here somewhere.

  • I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and why I have it

    I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and w I have it

    There is no need to download anything to solve this problem.
    You installed the "Genieo" malware. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the malware (as long as you never reinstall it.)
    Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    Triple-click anywhere in the line below on this page to select it:
    /Library/Frameworks/GenieoExtra.framework
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.
    If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
    Move each of these items to the Trash in the same way:
    /Applications/Genieo.app
    /Applications/Reset Search.app
    /Applications/Uninstall Genieo.app
    /Library/LaunchAgents/com.genieo.completer.update.plist
    /Library/LaunchAgents/com.genieo.engine.plist
    /Library/LaunchAgents/com.genieoinnovation.macextension.plist
    /Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
    /Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
    /usr/lib/libgenkit.dylib
    /usr/lib/libgenkitsa.dylib
    /usr/lib/libimckit.dylib
    /usr/lib/libimckitsa.dylib
    ~/Library/Application Support/com.genieoinnovation.Installer
    ~/Library/LaunchAgents/com.genieo.completer.download.plist
    ~/Library/LaunchAgents/com.genieo.completer.update.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
    Step 2
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
    Make sure you don't repeat the mistake that led you to install this trojan. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    Finally, be forewarned that when Genieo is mentioned on this site, the attacker sometimes shows up under the name "Genieo support." He will tell you to run a fake "uninstaller." As he intends, the uninstaller does not completely remove the malware, and is in fact malware itself.

  • Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Thanks

    Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Here's the example:
    WING
    GAMES
    MAJORITY
    Thanks

    If the third link you posted (the link containing the word "majority") does not look like the following then you inadvertently installed adware.
    That particular page should resemble the following:
    The word "majority" in the third paragraph should not be a link and should not have the green icon associated with it.
    To learn how this may have occurred, and how to prevent it from occurring in the future, read How to install adware
    Most so-called "news" websites are nothing more than entertainment outlets that cater to prurient interests, and contain advertisements that leave the user about three clicks away from installing junk. If you decide to frequent those websites, Safari's "Reader" feature helps minimize that exposure.
    Try it:

  • Funny symbol & how to get rid of it

    I was working with text a while ago. All is ok. Then suddenly, I don't know how it happen, when I press "T" and start to click on an area where I will put a text, a funny symbol like the one below starts to appear.
    Can anyone tell me what caused this symbol to appear and how to get rid of it? I tried looking at google but I don't know how to type in that kind of symbol. Also, the symbol can't be copied. Thanks!

    Go to Type>Show Hidden Characters to deselect that option, and the "funny symbol" should go away. It's a pilcrow, or paragraph mark, that's ordinarily invisible.
    Peter

  • Somehow i have got mackeeper and the smartsearchnet on mac air. I do not know how to get rid of it! please help me

    I have got mackeeper and smart search.net on my Mac air. I am new to mac's so i am so lost in how to get rid of things. Im not sure how i got it but i just want it gone now   mac book is only a couple months old so running all latest programmes on it. Can anyone help me please?

    You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
    If you have trouble following those instructions, see below.
    Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
    The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
    Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination  command-C:
    /Library/LaunchDaemons
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
              com.something.daemon.plist
    and
               com.something.helper.plist
    Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
    If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
    /Library/LaunchAgents
    In this folder, there may be a file named
              com.something.agent.plist
    where the string something is the same as before.
    If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
    Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
    The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
    Open this folder:
    /Library/Application Support
    If it has a subfolder named just
               something
    where something is the same string you saw before, drag that subfolder to the Trash and close the window.
    Don't delete the "Application Support" folder or anything else inside it.
    Finally, in this folder:
    /System/Library/Frameworks
    there may an item named exactly
                v.framework
    It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
    Don't delete the "Frameworks" folder or anything else inside it.
    If you didn't find the files or you're not sure about the identification, post what you found.
    If in doubt, or if you have no backups, change nothing at all.
    The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.

  • How to get rid of missing link dialog?

    Hello All,
    Here is the description of the problem I am facing..
    From the indesign document I am exporting some incopy files.I close the indesign document and then I relocate the incopy files to some other location.
    Now I again reopen the indesign file, while opening, the missing link dialog pops up which asks for either not to fix the links or fixing the links automatically.
    How can I do the same thing programatically so that the Missing dialog will never pops up.
    So here are my two requirements.
    1) How to relink the files programatcally
    2) How to get rid of the missing link dialog.(also what is the widgetID of this dialog.?)
    I posted this question before also but couldn't get the solution.
    I tried every possible way available in sdk
    i.e using
    IUpdateLink
    kRestoreLinkCmdBoss
    IInCopyDocUtils
    etc.
    But I was unable to relink the files as well as supressing the missing link dialog.
    Any help in this matter will be highly appreciated.
    Regards,
    Yopangjo

    Hi Emanuele,<br /><br />Here is the code..I put this code in Respond function.<br />Please also refere the   FileActionsOpenDocResponder.I also tried using the functions CheckLinkedStories and others.<br /><br />//code start////<br />InterfacePtr<IDocumentSignalData> documentSignalData(signalMgr, UseDefaultIID());<br />ASSERT(documentSignalData != nil);<br />if (documentSignalData == nil) {<br />break;<br />}<br />InterfacePtr<IDocument> doc(documentSignalData->GetDocument(), UseDefaultIID());<br />if (!doc) {<br />break;<br />}<br /><br />IDataBase * db = GetDataBase(doc);<br />InterfacePtr<ILinksManager> linksManager(doc,UseDefaultIID());<br />if(linksManager == nil)<br />{<br />return;<br />}<br />for(int32 linkIndex = 0;linkIndex < linksManager->GetLinkCount();linkIndex++)<br />{<br />UIDRef linkUIDRef = linksManager->GetNthLinkUID(linkIndex);<br />InterfacePtr<IDataLink> dataLnk(linkUIDRef,UseDefaultIID());<br />if(dataLnk == nil)<br />{<br />continue;<br />}<br /><br />UIDList linkUIDList(linkUIDRef.GetDataBase());<br />linkUIDList.Append(linkUIDRef);<br /><br />NameInfo ni;<br />PMString formatName;<br />uint32 fileType;<br /><br />dataLnk->GetNameInfo(&ni,&formatName,&fileType);<br /><br />uint64 size,time;<br /><br />IDataLink::StateType stTp = dataLnk->GetStoredState(&size,&time);<br />switch(stTp)<br />{<br /><br />case IDataLink::kLinkNormal:<br />break;<br /><br />case IDataLink::kLinkMissing : <br />case IDataLink::kLinkOutOfDate :<br />{<br /><br />//code for relinking.<br />InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); <br />if(relinkCmd == nil)<br />{<br />continue;<br />}<br />InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA); <br />if(relinkCmdData == nil)<br />{<br />continue;<br />}<br /><br />//Here you can hardcode the file name in place of dataLnk->GetFullName()<br />relinkCmdData->Set(db, linkUIDRef.GetUID(),&ni, &formatName, fileType, IDataLink::kLinkNormal,(dataLnk->GetFullName())); <br />CmdUtils::ProcessCommand(relinkCmd); <br /><br />//update the link<br />InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*><br />(CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss)));<br />if(dataLinkHelper == nil)<br />{<br />return;<br />}<br />InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); <br />UID newLinkUID; <br />updateLink->DoUpdateLink(dataLnk, &newLinkUID );//kFullUI);<br /><br />//The program crashes here<br />InterfacePtr<ICommand> command(CmdUtils::CreateCommand(kRefreshCmdBoss));<br />InterfacePtr<IRefreshCmdData> data(command, IID_IREFRESHCMDDATA);<br />data->Set(GetDataBase(dataLnk), newLinkUID, IDataLink::kLinkNormal);<br />CmdUtils::ExecuteCommand(command);<br /><br />}          <br /><br />//code end.<br />(please check for any missing brackets.)<br /><br />Thanks and Regards,<br />Yopangjo

  • How to get rid of pop-ups on my macBook air?

    One of my roommates recently downloaded torrent on my macbook air to watch a movie, and since then I have been experiencing popups every time I open a new page on safari. Also, my search engine has switched to something known as search-quick? I've tried a few different mac detox sites to no avail. Very frustrated. Any suggestions on how to get rid of this "virus" and pop-ups would be much appreciated!

    There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware.
    Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
    The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
    Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination  command-C:
    /Library/LaunchDaemons
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
              com.something.daemon.plist
    and
               com.something.helper.plist
    Here something is a variable word, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes the word is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
    If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
    /Library/LaunchAgents
    In this folder, there may be a file named
              com.something.agent.plist
    where the word something is the same as before.
    If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
    Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
    The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
    Open this folder:
    /Library/Application Support
    If it has a subfolder named just
               something
    where something is the same word you saw before, drag that subfolder to the Trash and close the window.
    Don't delete the "Application Support" folder or anything else inside it.
    Finally, in this folder:
    /System/Library/Frameworks
    there may an item named exactly
                v.framework
    It's actually a folder, though it has a different icon than usual. This item always has the above name. Drag it to the Trash and close the window.
    Don't delete the "Frameworks" folder or anything else inside it.
    If you didn't find the files or you're not sure about the identification, post what you found.
    If in doubt, or if you have no backups, change nothing at all.
    The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.

  • Can anyone tell me how to get rid of tlb search? it unfortunately entered into my mac. Whenever I use safari, a pop-up window opens with some ads. Please help me to find a way to remove this malware.

    Can anyone tell me how to get rid of tlb search? It unfortunately entered into my mac. Whenever I use safari, a pop-up window opens with some ads. Please help me to find a way to remove this malware.

    You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Tracing a png - how to get rid of background

    I've imported a png of a simple black drawing on a man (Like you get on a toilet door) with a transparent background and tried to trace it to a vector but I can not get rid of the white background. i've tried it as a jpeg to see if the trace command would generate two layers one for the main drawing and one for the background that I could delete, but it di dnot. I tried setting the Trace fuction to just outline but that did nto work either.
    Can someone tell me how to get rid of the background when tracing a simple image or break apart the object to get at the background shape?
    Kevin

    Yes I tried each othe the options on the trace and I always end up with a solid white background.
    Here is the png - http://www.federatedfilms.com/StickManBlue.png

  • I have a problem mackeeper keep opening up another tab and these little green circle stuff keep popping up on the page and overtime my cursor hover over it it pops up a little box with stuff in it does anyone have an idea how to get rid of it?

    i have a problem mackeeper keep opening up another tab and these little green circle stuff keep popping up on the page and overtime my cursor hover over it it pops up a little box with stuff in it does anyone have an idea how to get rid of it?

    You installed a variant of the "VSearch" trojan. Remove it as follows.
    This malware has many variants. Anyone else finding this comment should not expect it to be applicable.
    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.2c232f1e4d12129e.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.2c232f1e4d12129e.daemon.plist
    /Library/LaunchDaemons/com.2c232f1e4d12129e.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/2c232f1e4d12129e
    /System/Library/Frameworks/v.framework
    The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • I cant update nor download any applications. My password was always invalid. And other username is prompted richardca0521@yahoo.ca which is not my account. How to get rid of this apple id and use my account for download? I have registered this to itunes.

    I can't update nor download any apps in itunes. Prompted invalid password, upon checking the apple id was not mine. The id was [email protected] whic is not mine. Pls. Help how to get rid of this. Thank you.

    try and delete the apps and re-add them

  • I have a new iPhone 5S.  While trying to learn about it, I accidentally recorded a voice memo with no content.  I cannot now figure out how to get rid of it.  There is a banner across the top of my phone with this memo which I don't want.  Help!

    I have a new iPhone 5S.  While trying to learn about it, I accidentally recorded a voice memo with no content.  I cannot now figure out how to get rid of it.  There is a banner across the top of my phone with this memo which I don't want.  I have deleted it from iTunes but cannot get it off the phone.  Help!

    The banner usually indicates that the memo is "Paused." If you go back into voice memos, touch the word "Done" beside the big red pause button, give it a name, then it will show in a list. Touch the memo in the list then touch the trash can icon that should appear.

  • How to get rid of Safari !!!!!

    I must have missed the message to install Safari during one of the many iTunes updates and now I'm stuck with it on my computer taking up 60GB of space! I've tried removing it through Control Panel -> Uninstall Programs, but get the message that I don't have administrator privilages - which I do. Thinking I may have had this installed while I was logged in under my main administrator name, I logged off and logged back in under my only other user name and tried again - same message. So I went to the Safari folder and changed all security privilages to full access for both accounts and it still won't uninstall. How can this program claim I don't have administrator privilages when I used the only two user accounts on my computer?? So in a fit of defiance and desperation, I deleted the Safari folder and then ran the name "safari" in Vista's search box under the Start menu (I even included the wildcard .* to catch all examples). Guess what? Rather than find all traces of safari on my computer so I could delete them manually, Safari started running again!! I cancelled the program before it finished loading and went to recheck the Program Files folder and Safari was back there with a full 60GB of files again! I CAN'T GET RID OF IT!!
    Safari is a malicious software program as bad as any Malware or Adware I have ever seen! How can I get rid of it??
    (and no, I really do not want Safari - I don't care if you think its the greatest thing since sliced bread - I make the choices on my computer, not some software engineer or marketing division and I DON'T WANT SAFARI!!)
    Any suggestions on how to get rid of it? Did I miss something?
    Thanks all,
    LH

    The Safari update is not clear what it is and provided no explanation of what it was - it simply states "Safari". For all I know it could have been an indexing file for iTunes. There was no explanation as to what is was and the install checkbox was already checked so the unsuspecting may quickly and accidentaly hit install along with the iTunes update, thinking it was a required part of iTunes. Regardless of how it got there, I'm trying to get rid of it and it won't uninstall.
    Now you may fancy yourself as some kind of wunderkind software expert, but you apparently do not know Vista because it really does take up 60 GB and every time I delete it, it tries to reinstall itself. These are not multiple installations and I am the only user on this computer. You haven't offered me any help - only insults. If you aren't willing or able to offer help or assistance in the most sincerest form this request was intended, than stay out of this thread. Your actions and insults reinforce the prevailing belief that Apple users are unkind, rude, self-important snobs.

Maybe you are looking for

  • How do I share music from an external drive?

    I'd like to share music from a external drive on my network. I do not want to add the music to my library, but I would like to view and play it in iTunes. Can thie be done? I'm using iTunes on a Windows 7 platform. Thanks.

  • Migration Assistant in OSX 10.8.2

    I have an ailing MBP 13" 2.26 Ghz Intel Core 2 Duo w/ 8 gig of RAM, that depsite reinstalls of OSX 10.8.2, using Repair Permissions, etc in Disk Utilities from the installer disk, the Mac is still running irraticaly. As a prior Apple Solutions Expert

  • PPro CS4 crashes when importing After Effects comp

    I am using Premiere Pro CS4 on Mac, when i try to import an after effects comp that uses the zaxwerks "flag" plugin, premier crashes...why?

  • Import From Audio DVD ?

    I bought a audion DVD a few years ago that was some new kind of high quality DVD audio. It's Tommy by The Who and contains all the songs supposedly in a higher quality. I want to import this into iTunes but I can't. The DVD has a AUDIO_TS and VIDEO_T

  • How to turn off "re-open all application windows"

    How to turn off "re-open all application windows". Even though its unselected in preferences. my computer still tries to do this and causes startup problems and delays. its been a hangup since lion. when are they going to fix this???