How to get rid of "Warning: Applet Window" in third party java applet code

Hello I am having a hard time figuring out how to disable this darn Warning applet window that pops up and says "unable to detect an audio device" when it loads onto a comp that has no sound card! It is an audio streaming applet which was discarded by the developer and he does not provide any support for it....
I know zero about java and I am figuring this is something simple that any typical programmer familiar with java could figure out in five minutes.....
the applet is called audio centric and is located here:
http://javaboutique.internet.com/AudioCentric/
I appreciate anyones time who could help me out!

Sorry, there is not source code deployed and I'll not encourage you to decompile it, instead contact developer. They will appreciate very much your claim.
Regards.

Similar Messages

How to get rid of the command window....

How to get rid of the command window, automatically, once the .bat file which execute the .jar has been executed?
Znx

If you don't want the command window to show, use:
javaw yourClass
instead of...
java yourClass

How to get ride of pop up window that freezes browser

Sometimes I get these pop up windows that freezes the browser I don't want to click on the buttons so I have to force quit to close Safari. The last one i had even showed up after I reopened Safari. How can I avoid/get rid of these pop ups?

lab_rat wrote:
I am using the Block Pop Windows but it doesn't alway work as I do get the occasional little pop up window that I don't want to click on that freezes Safari. My only option has been to force quit Safari.
As we still have no magic crystal balls to see on your problem, it will be very nice if you have some more information about "that window" .
Eventually post a screenshot here.

How to get rid of warning when I open safari from "Hunt Toolbar"

Hi, I installed "Hunt Toolbar" a Torrent search add on for Safari. But I think it was ment only for Windows not Mac. Now every time I open Safari I get the yellow triangle with a ! in it and the message... Community Toolbar: We're sorry, but the Safari browser version you are currently useing does not support the community toolbar. and a Close button. Safari works fine I just want to get rid of this annoying warning whenever I start Safari. Tried reinstalling Safari but same thing. Any help would be greatly appreciated ! Thanks.
PS: I'll add a screen shot of the the annoying little bugger :-P

You installed the Conduit spyware. To remove it, select Go ▹ Go to Folder… from the Finder menu bar, then enter the following text in the box that opens:
~/Library/Application Support/Conduit
Delete the selected item, if it exists.
Now select Go to Folder… again and enter:
/Library
From the folder that opens, delete the following items, if they exist. You may be prompted for your login password.
Application Support/Conduit
InputManagers/CTLoader
LaunchAgents/com.conduit.loader.agent.plist
ScriptingAdditions/ct_scripting.osax
Close the folder. Now press the key combination shift-command-A. The Applications folder will open. Delete this item from the folder:
Toolbars
Close the folder. Log out and log back in.

How to get rid this Warning=Sales order (SOBKZ = ) is not provided for this

Dear Concerns
In MB1C, Mov Type=521E, and the batch no=A.
After entering all the required entries the systen gives me the warning and the system save the transaction after pushing the enter button five to six times.
Sales order (SOBKZ = ) is not provided for this goods movement.
I want to get rid of this warning .
So that the system could save the transaction in one click.
Regards:Vijay

Hi
Can u please tell me the solution of that issue as in my case the item has to be received
and reserved against the sales order.
can i make my sales order item cate mark with the special stock indicator and
does it help to solve my problem
Yes this will only solve the problem. You need to mark your sales order item cate with special stock indicator E
Then PGI will be smooth otherwise you can expect problem
This reply is for the other friend
In-IMGMaterials ManagementInventory Management and Physical Inventory---Define Attributes of System MessagesSettings for System Messages----
Here in the new entries add message M7---374 with version as 00 and make that as error message and save it
Regards
Raja

Help: How to get rid off the default Window menu from FORM screen?

Hi,
I am working on a FORM application. On the very top left of the FORM screen, there is a default Window menu with:
Cascade
Tile Horizontally
Tile Vertically
etc.
The end user will never use it for this application. To make the screen look nicer, is there a way to hid or get rid off it?
Also if possible, I want to hid or get rid off very top "Oracle Developer Forms Runtime - Web"
Thanks.
Jimmy

Also if possible, I want to hid or get rid off very top "Oracle Developer Forms Runtime - Web"I see you are running with separate frame. In the When-new-form-instance trigger, use
Set_Window_Property(Forms_MDI_Window, Title, "xyz" );
to change the window title.

Getting rid of "Warning: JavaScript Window" when using xfa.host.response()

When I use xfa.host.response() I get that javascript warning. Is there a way to get rid of it?
Thanks.

The only way I know of to get rid of this warning is to Certify the document. Once the document has been certified, any javascript interaction either through the Dialog Manager or xfa.host.response will not have the warning.
However, The only way to certify the document is to use Document Security Server or manually through Acrobat by adding a blank signature.
I also dont know if this will work with Dynamic forms without breaking the certification. It worked in Static / Acrobat 6 compatible PDF's.
Any scripting or dynamic rebuild of the form will break the certification and the message comes back.
So basically, stick with the warning for now or else you need to make sure you revalidate the signature after EVERY piece of script using the signatureValidate() method of the AcroForm Field.

How to get rid of "Apple iPhone" window that opens in Windows 7?

Whenever I connect my iPhone 4 via USB to my Windows 7 computer, this window automatically opens. How do I stop this from happening?
I've already gone into Control Panel and selected "No Action" in the Events tab for this device. What else can I try?
Thanks in advance for any help you can provide.
~Derning

Use the "Search Discussions" (upper right of this page) and use "question mark" as the search term. Limit the search to QuickTime.
Look for pages that have the green "Solved" star at the top of the page to find the answer.

How to get rid of extra background window

New to CS6, which opens an extra blank background window/container that stays open, blocking desktop, when .psd is closed. Hate it... how to make it stop?

Thanks. Now I know what its called...

How to get rid of [WARNING : MESSAGE ENCRYPTED]

Hi Everyone, I've scoured the internet looking for an answer to this, but unable to find anything that helps me.
All the forms I have created were created using LiveCycle Designer ES2 - All the forms that are currently published contain a submit button, and forms are submitted to an email address. Some forms arrive at their destination email address with [WARNING: MESSAGE ENCRYPTED] in the subject heading. Is there anyone out there that can tell me:
1) What causes this [WARNING: MESSAGE ENCRYPTED] to appear in the subject once received by the recipient?
2) Why does it only seem to be occuring for some of the forms I have created, and not all?
3) Is there anything that can be done within LiveCycle to prevent this from happening, or to prevent the message from being encrypted, hence stopping this from happening?
Thanks everyone.

I'd not heard of it but just did a search and it appears to be added by some anti-virus email scanners probably because of the file attachment.
So it has nothing really to do with LiveCycle but the email system being used to send the email.

How to get rid of the console window and keep the GUI?

i made a jar, but my app needs the API to sniff the network.
i made a .bat file so that i can run the jar file without having to type in the commands.
//contents of myApp.bat
start java -Djava.library.path="jnetpcap-1.3.0" -jar myApp.jarthe problem is, there's this fugly CMD prompt that just wont go away. if i close it, it closes my app as well. so, how do i solve this?
thanks.

Use the "javaw" command instead of the "java" command.

How to get no. of rows of Windows Command Prompt in java

hi all,
can anybody tell me that is there any java utility avalilable throght I can find the how many rows avalilbe on currently executing command prompt, and also how can i clear the content of command prompt (result of 'cls' command).
Currently execting command prompt means from where I have run my java program.
any reference is also welcome.
thanks in advance.

Clearing the screen is trivial, as long as you're OK with making your program specific to Windows only (i.e. you never hope to run it on any other OS ever):
Runtime.getRuntime().exec("cmd /c cls");As to figuring out how many lines your command window's screen buffer has - good luck with that. I'm not familiar enough with the Win32 API to get this info, but you'll have to figure out what that is, and call it via JNI.

Get rid of the MDI window

Does anyone know how to get rid of the MDI window at run time?
I could achieve this by setting the data window to be a dialog
window, and set the set_window_property(forms_mdi_window,
window_state, minimize). Is there a better way to do than
that?
Thanks in advance.
John
null

the previous people were close... you need to do
f50run32 Module=xxxx userid=xxxx usesdi=yes
(not usesid like afore mentioned.
Hope this helps.
Paul
Steve (guest) wrote:
: set the console window = null on the form module property
sheet.
: john (guest) wrote:
: : Does anyone know how to get rid of the MDI window at run
time?
: : I could achieve this by setting the data window to be a
dialog
: : window, and set the set_window_property(forms_mdi_window,
: : window_state, minimize). Is there a better way to do than
: : that?
: : Thanks in advance.
: : John
null

Can anyone tell me how to get rid of tlb search? it unfortunately entered into my mac. Whenever I use safari, a pop-up window opens with some ads. Please help me to find a way to remove this malware.

Can anyone tell me how to get rid of tlb search? It unfortunately entered into my mac. Whenever I use safari, a pop-up window opens with some ads. Please help me to find a way to remove this malware.

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Printer is connected. How to get rid of installation window upon boot-up?

I have an Officejet 4500; successfully connected to desktop (Windows Ultimate Vista OP). However, had a problem when connecting to laptop (Windows XP). When getting to configuration step, had a fatal error. Folllowing instructions in auto-dowloaded "HP Installation Error - XP" application, subsequently, downloaded drivers, utlities, etc. Finally was able to print off of laptop. However, everytime I boot up computer now, an installation window auto-appears with a Fatal Error message, then it runs through all the installation steps again, stalls at the configuration step, then I have to click a Finish button to finish an "uninstall" (which it does not do, the printer is still installed). So, to continue using the computer, I have to click the Cancel button in the middle of the "install" operation, use the computer for other things I need to do, then I can't shut down until it completes its "Uninstall" process again. The printer is connected...HOW do I get rid of the install window that auto-appears when I boot up? (There is NO "Close" button or icon.)

I have an Officejet 4500; successfully connected to desktop (Windows Ultimate Vista OP). However, had a problem when connecting to laptop (Windows XP). When getting to configuration step, had a fatal error. Folllowing instructions in auto-dowloaded "HP Installation Error - XP" application, subsequently, downloaded drivers, utlities, etc. Finally was able to print off of laptop. However, everytime I boot up computer now, an installation window auto-appears with a Fatal Error message, then it runs through all the installation steps again, stalls at the configuration step, then I have to click a Finish button to finish an "uninstall" (which it does not do, the printer is still installed). So, to continue using the computer, I have to click the Cancel button in the middle of the "install" operation, use the computer for other things I need to do, then I can't shut down until it completes its "Uninstall" process again. The printer is connected...HOW do I get rid of the install window that auto-appears when I boot up? (There is NO "Close" button or icon.)

How to get rid of "Warning: Applet Window" in third party java applet code

Similar Messages

Maybe you are looking for