How to get rid of webutil version info?

I created a form to test reading and writing files on the client using webutil. (forms 11.1.1.4) which is something I need for my
forms6i -- forms11 conversion.
But it has an issue which is when the form starts it prints out a screen with webutil version info on it. (Webutil Information) .
I see this stuff is on the webutil_canvas. That's interesting but I don't need that in the form. That would confuse the users.
Unfortunately if I open this canvas I get:
"Frm-13008 Cannot find javabean with name oracle.forms.webutil.ole.Olefunctions"
oh oh. That doesn't sound good...
but anyway how do I best get rid of it showing this screen?
I thought I was following instructions correctly for subclassing the object library in my test form. (famous last words.)

Oh never mind I found it.
It does not work to change the webutil_canvas to NOT raise_on_entry. But it does work to put a block before the webutil block.
It seems that if webutil is the first block it has the ability to raise that canvas no matter what but I don't know how it does it.

Similar Messages

How to get rid of new version itunes and go back to older version

I DO NOT LIKE THE NEW VERSION OF ITUNES
HOW DO I GET RID OF OT AND GO BACK TO OLDER VERSION

You can get closer to the old look with ctrl-b to turn on the menu bar and ctrl-s to turn on the sidebar, then select Artists from the selection of views across the top.
If you still want to roll back to iTunes 10.7 first download a copy of the installer from here, uninstall iTunes and suppporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
tt2

How to get rid of all my info on phone?

OK, I bit the bullet and bought the new 3G (although I have had nothing but problems with my old iphone since upgrade)
Anyways, my question is how do i delete all the info from this old phone before I sell it to some other "sucker"?
thanks

While I agree I didn't find the 3G worth upgrading to in my case (and paying more) since I don't live in 3G area (though work in one) and don't care that mush for GPS (the pesdo GPS is good enough for my needs).
But I don't agree about the 2.0 firmware. I do like what it adds (yes I know there are issues) but firmware will be udpated. Alredy talk about 2.01. So, I would say don't give up on 2.0, but if the extra hardware isn't worth the extra money then sure, go back.

How to get rid of metadata field Info in SOAP response in SharePoint 2010?

Hello All,
I am using jQuery code to retrieve list data via SOAP web services (GetListItems operation) and it is working great too. but I am facing performance issues. I have specified the required fields in via ViewFields, but still i am getting all those below
default metadata fields in response.
ows_MetaInfo
ows__ModerationStatus
ows__Level
ows_UniqueId
ows_owshiddenversion
ows_FSObjType
ows_Created
ows_PermMask
ows_Modified
ows_FileRef
It is increasing data bytes to be loaded and adding quite an unnecessary overload while page load.
Any idea to remove this fields from response and optimize site performance? Thanks in advance!
Jaydeep.

Here is my soap request for your reference.
<soap:envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:body>
<getlistitems xmlns="http://schemas.microsoft.com/sharepoint/soap/">
<listName>45B263C9-434A-488F-AB04-EAF8BDFFA8EF</listName>
<query>
<Query xmlns="">
<Where>
<Eq>
<FieldRef Name="Status"></FieldRef>
<Value Type="Choice">Active</Value>
</Eq>
</Where>
<OrderBy>
<FieldRef Name="Sort_x0020_Order"></FieldRef>
</OrderBy>
</Query>
</query>
<viewFields>
<ViewFields xmlns="">
<FieldRef Name="ID"></FieldRef>
<FieldRef Name="Title"></FieldRef>
<FieldRef Name="_x0054_ab1"></FieldRef>
<FieldRef Name="_x0054_ab2"></FieldRef>
<FieldRef Name="_x0054_ab3"></FieldRef>
<FieldRef Name="_x0054_ab4"></FieldRef>
<FieldRef Name="Page_x0020_URL"></FieldRef>
</ViewFields>
</viewFields>
<rowLimit>200</rowLimit>
<queryOptions>
<QueryOptions xmlns="">
<IncludeMandatoryColumns>FALSE</IncludeMandatoryColumns>
</QueryOptions>
</queryOptions>
</getlistitems>
</soap:body>
</soap:envelope>
Thanks!

How can I delete my bank information from my Apple ID account Iv tried using another account but i can't update any of my apps becouse there on the other account and I can't re download the apps so I realy need to know how to get rid of my bank info :(

Please help me

This easier to do from a computer. Go to iTunes, Store, My Account and then edit Payment Information.

How to get rid of D.O.T tab&MSI info tab?

Hiya people
Does anyone have any idea,s on how to get rid of the msi info and DOT tabs in the display properties
I,ve looked thru the forums and someone said the msi drivers introduce a new dll to the win/system32 folder and the only way is to format the drive ,i don,t wonna do that as i,ve just recently formatted.
Its not a major fault or anything as i think they are harmless, they just annoy me being there,i prefer coolbits for my overclocking.
Any idea,s would be greatly appreciated thanks
AthlonXP2800+ Bartoncore @2083MHZ WinXP pro sp1
Epox NForce2 8RDA+ mobo
2x512MB dualchannel enabled
MSI NX6800GT 256MB videocard @400core 1100mem forceware 65.73beta
Audigy Soundcard + 5.1 soundsystem
Sony Trinitron 21inch FlatDisplay

Quote
Originally posted by CDM
Well Congrats on answering your own question with in 16 minutes

STOP "determining gapless playback info": how to get rid of it?

I have itunes 7 with macbookpro and 80 gigs of music on an external hard drive connected through USB to my Airpot Extreme 802.11n base.
I CANNOT USE itunes because it is endlessly "determining gapless playback info" (i'm using the French version who says "détermination des données de lecture sans intervalle")
though I DON'T NEED IT. This is the option that allow albums to play gapless... no such an improvement for a so slow process!
This morning it treated 200 songs in 5 hours... it has been one week i'm letting it work times to times but with this rhythm I still have to wait 350 hours = more than 15 days 24/24... without speaking of the extremely frequent cases when I have to "force to quit" and restard itunes.....
I CAN'T BEAR THAT ANYMORE... IS ALL THAT REALLY NECESSARY?
I cannot imagine this option cannot be unactivated... so please if someone can tell me how to get rid of this "determining gapless playback info" thing... I would be very happy...
Many thanks for your answer!

I'm having the exact same issue. I have a 802.11n Airport Extreme that has my 100 GB music library connected to it via the USB port, and my iTunes (on my MacBook Pro) connects to it via the Airport Disk. Each time I add a batch of new songs to the library, it takes for ever for iTunes to resolve the gapless information. I just added 30 tracks, and it took about 10 to 15 minutes, during which iTunes was completely inaccessible with the spinning beach ball.
My theory is that to determine gapless information, iTunes has to load each track into memory to analyze it. That goes by quick if the libary is direct connected, but over the network that can be a pain (especially if the mp3s are large).
I really wish Apple would make this feature "toggle-able" on a future release of iTunes.

I upgraded to iPad2 from original. How do I get rid of original iPad info on computer so I can synch computer with iPad2 info?, I upgraded to iPad2 from original. How do I get rid of original iPad info on computer so I can synch computer with iPad2 info?

I gave my daughter my original iPad when I upgraded to iPad2. I deleted iTunes and Quick Time from my computer thinking it would get rid of the old info from the original iPad. I reinstalled iTunes and Quick Time and tried synching my new iPad2. It downloaded the old info from my original iPad to my new iPad2 and now it calls my new iPad2 Linda's iPad. How do I get rid of all the old info and just have my new iPad2 info? I don't mind that it put somethings from my original iPad (movies, books, some - not all - my music, etc). I can't even synch the bluetooth of the iPad2 to the bluetooth of my PC (I think it's all related somehow).

Why would you not want to keep all of the data, apps, music, photos etc that you had on your first iPad on your new iPad? Don't you want to keep all of that content? You bought the apps, music etc with your iTunes account I would assume so why not keep them?
Deleting iTunes simply removes the application from your computer - not the content in your iTunes library.
If you want to rename your new iPad - connect to your PC - launch iTunes - double click on the iPad name on the left side of the iTunes window and you can type in the new name. Then hit the return key on your keyboard.
How to rename your device....
http://support.apple.com/kb/ht3965
Sync the Bluetooth of the iPad2 to your PC? You can't sync the two devices via Bluetooth. You pair devices via Bluetooth but that would do no good for you anyway. You can't transfer content from the iPad to the PC via Bluetooth.
iOS Supported Bluetooth Profiles
http://support.apple.com/kb/ht3647

I don't like Firefox 4.0 and want to go back to the last version.. how do i get rid of this version?

the other version let me access my email on the homepage now i have to go to bookmarks...how do i get rid of this version???!!!

That sounds like the difference between the new Firefox home page '''about:home''' and the previous Google Search page which has '''GMail''' at the top if you used GMail.
You can change your home page so that it points to what you had before, which It would be something like:
* http://www.google.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official
Note on Google pages
* They won't show GMail at the top until you have gone to GMail
Directions to '''reset your home page''':
* http://support.mozilla.com/en-US/kb/How to set the home page
More on Search and on Keyword Shortcuts
* [http://dmcritchie.mvps.org/firefox/search.htm Search and Substitution Shortcuts especially for Firefox users]
* [http://dmcritchie.mvps.org/firefox/kws.htm Firefox Keyword Shortcuts]
But I don't really understand why you or anyone else would want to use such a page for a home page, it is redundant. You have as many search engines as you want in the search bar, the default search is Google.
You can invoke '''GMail''', any search, any bookmark, any bookmarklet with a [http://dmcritchie.mvps.org/firefox/kws.htm keyword shortcut] .
'''You're not stuck with how the toolbars have been changed''' in Firefox 4.0, '''this is Firefox''', you can '''customize''' it. That is why Firefox became so popular, you can customize it how you want it with Customize Toolbars, Extensions, Themes, Styles.
You can make '''Firefox 4.0.1''' look like '''Firefox 3.6.17''', see numbered items '''1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]

How do get rid of the Pop Up Info Tags?

This might sound Stupid, but how do get rid of the Pop Up Info Tags? that keep coming up on the Mac when in an Application that says what this item is for. This drives me crazy, and at times gets in the way of what I'm looking at. There must be some Pref to turn this off and on, I Hope.
Anyone?
ScottG
G5 Dual 2.3 Mac OS X (10.4.3)

ScottG wrote: "I guess Safari doesn't have this option?"No, it does not. If an app offers the option, it will be in its preferences. It's rare nowadays for an application to offer a preference for disabling tool tips, especially after the developer went to all the trouble to provide them.
Simply move your cursor off the control displaying the tool tip: the tip will vanish.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

For my ipod 3g 8gb in itunes where the info for the memory is half of the memory is taken up by "other" so im wondering what this other is and how to get rid of it?

for my ipod 3g 8gb in itunes where the info for the memory is half of the memory is taken up by "other" so im wondering what this other is and how to get rid of it?

Have you reset your Ipod resently? Never mind my ohter reply.

HT1918 How do I change my acct to get rid of credit card info altogether and operate with none status?

How do I change my acct to get rid of credit card info altogether and operate with none status?

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How to get rid of title bar of a quicktime window?

The main problem:
I want to display the title info etc about each track as they play in iTunes. How can I do that on an otherwise black screen (desktop) (I don't want to use the visualizer with its psychedelic patterns).
Background:
I want to play music from iTunes (many pieces in a row - for like a full day). While this is happening I want the title etc of the tune to be displayed on the screen, like white smallish text against a black background in the lower right hand corner. At the same time I want slides to be displayed on the screen.
So, with iPhoto I can run a slide show but only while one piece of music is playing.
Instead I can have the desktop slowly change (from system preferences) with images from a folder every 5 seconds. That's not too bad. Looks good, actually, except for that annoying menu bar at the top! Well, black tape can hide that one (or a second display and move it over there). Now iTunes can play away all day.
As to how to get the title etc of the song playing displayed I was thinking about somehow extracting it from iTunes with applescript, then paste it into the text track of a quicktime movie, and display that little movie in a small window. I have figured out how to get rid of the controller from the window. But, I can not figure out how to get the title bar of the quicktime window to go away - that is I want a window with nothing around it, neither controllers nor title bar nor anything. How do I create such a window. Any good ideas out there?
Or is there a totally different way of obtaining the same effect?
Thanks.
G4 Mac OS X (10.4.8)

Hi,
You could try posting at the QuickTime discussion area. There might be an iTunes visualizer that allows you to make a slideshow with track info. It has been a while since I tried making a SMIL file, but I think you could do what you want with that. Not sure how you create a streaming text of track information. I would have to do some reviewing.
gl,

How to get rid of automatically created Mail and iCal accounts on client?

I have recently setup an OS X 10.6 Server for our small office. I got the domain name wrong in the initial install and fixed this by doing a complete clean reinstall of OS X 10.6 server (now upgraded to 10.6.4).
The problem is that one of the OS X 10.6.4 clients had been setup to talk to the server prior to the rebuild. Now on this client, I cannot work out how to get rid of or change the automatically created server accounts in iCal and Mail - everytime you login, these are recreated using the old domain name (and of course don't work).
In Mail if you remove the server account (from Accounts in Preferences), it just pops back again. I even removed every trace of the old domain name from the apple.com.mail.plist file but when I re-open Mail that darned server account (with the old domain name) just pops up again.
In iCal its slightly different in that you can remove the account and it stays away while you have iCal open. But as soon as you close and re-open it, that server account just pops up again!
I thought it might be something to do with Kerberos and found a Kerberos file on the client which had the old domain name throughout it - I changed all these references to the new domain name, but still the same behaviour in Mail and iCal.
This is doing my head in. Any ideas?

I have the same problem. Every time that I open iCal on the client a new account is created and an error message shown that I cannot login. I can delete the wrong account in the iCal preferences. However, as soon as I restart, the account and the error message are back.
How do I "unbind" and "rebind" a client? I searched the "Mac OS X Server
Open Directory Administration Version 10.6 Snow Leopard" but the only reference to "binding" seems to be in the context of Active Directory which I don't have.
Any help is greatly appreciated.

How to get rid of white space in EPS embedded in Word for letterhead template?

Does anyone know how to get rid of the white band in the bottom of this letterhead?
I embedded the EPS image (done via Illustrator) as a watermark in the header section of MS-Word.
It looks fine in the Word version, but as soon as I try to print the document - either via Word or via a PDF - that white
band on either side of the footer and underneath it keeps showing up. I can't get rid of it. I tried this on a PC and a Mac
and those white bands won't go away.
If anyone could let me know how to resolve this problem, I would be eternally grateful!
Thank you.
NZB

If you want this to bleed, then you will have to print on oversize paper and trim or find a printer that will print borderless.

How to get rid of webutil version info?

Similar Messages

Maybe you are looking for