How to get rounding diffrence for agreement?
I am passing 3 parameters to this function
1.Agreemnt number
2.Start date
3.End date
I want to calculate Rounding difference for the each agreement.
Here Problem is, when executing this function; I am getting correct value first time.
While executing second time it thing, it shows different value as result.
Can anybody solve this?
Or give me another idea to get rounding difference instead of using this function?
FUNCTION ysdf_rebate_settlement_amount.
""Local Interface:
*" IMPORTING
*" VALUE(IV_AGREEMENT) TYPE KNUMA
*" VALUE(IV_FROM_DATE) TYPE DATUM
*" VALUE(IV_TO_DATE) TYPE DATUM
*" EXPORTING
*" REFERENCE(EV_ACCRUED_AMOUNT) TYPE KWERT
*" REFERENCE(EV_SETTLED_AMOUNT) TYPE KWERT
*" REFERENCE(EV_ACCR_REV_AMOUNT) TYPE KWERT
*" EXCEPTIONS
*" NO_AGREEMENT
*" NOT_SALES_VOL_DEPENDENT
*" OTHER_ERRORS
DATA:
lv_accrued_amt TYPE kwert,
lv_settled_amt TYPE kwert,
lv_reversal_amt TYPE kwert,
lv_kawrt TYPE kawrt,
lv_kbetr TYPE kbetr,
lv_kstbs TYPE kstbs,
lv_kwert TYPE kwert,
lv_datab TYPE datum, "Start date
lv_datbi TYPE datum, "End date
lw_kona TYPE kona,
lw_t6b1 TYPE t6b1,
lw_konp TYPE konpdb,
lw_s060 TYPE s060,
lt_konp TYPE STANDARD TABLE OF konpdb,
lt_s060 TYPE STANDARD TABLE OF s060,
lt_scales TYPE STANDARD TABLE OF condscale,
lt_xvakes TYPE STANDARD TABLE OF vakevb.
CLEAR :
ev_accrued_amount,
ev_settled_amount,
ev_accr_rev_amount.
Validate agreement number and get agreement details.
SELECT SINGLE *
INTO lw_kona
FROM kona
WHERE knuma = iv_agreement
AND abtyp = c_abtyp_a. "Rebate Agreement
IF sy-subrc NE 0.
Rebate agreement & does not exist!
MESSAGE e061(yfr2sd) WITH iv_agreement
RAISING no_agreement.
ENDIF.
SELECT SINGLE * FROM t001
WHERE bukrs = lw_kona-bukrs.
Start date = later of the requested start date
and the agreement start date.
IF iv_to_date > lw_kona-datbi.
lv_datbi = lw_kona-datbi.
ELSE.
lv_datbi = iv_to_date.
ENDIF.
End date = earlier of the requested end date
and the agreement end date.
IF iv_from_date < lw_kona-datab.
lv_datab = lw_kona-datab.
ELSE.
lv_datab = iv_from_date.
ENDIF.
Retrieve configuration data once and keep in global variables
for better performance when repeated calls are made.
IF r_kobog_excl[] IS INITIAL.
PERFORM get_global_data.
ENDIF.
Agreement must be completely dependent on sales volume.
IF lw_kona-kobog IN r_kobog_excl.
MESSAGE e062(yfr2sd) WITH iv_agreement
RAISING not_sales_vol_dependent.
ENDIF.
Get a list of condition record numbers for the given agreement
PERFORM get_condition_numbers USING lw_kona iv_from_date iv_to_date.
Read condition records and scales.
CALL FUNCTION 'SD_KONP_SELECT'
EXPORTING
scale_read = 'X'
TABLES
condition_item = lt_konp
condition_number = r_knumh
condition_scale = lt_scales.
Accrual amount calculation for all conditions.
LOOP AT lt_konp INTO lw_konp.
konp = lw_konp.
CLEAR lw_s060.
Determine the turnover for rebate
CALL FUNCTION 'SD_BONUS_TURN_OVER'
EXPORTING
agreement_waers = lw_kona-waers
condition_krech = lw_konp-krech
condition_item = lw_konp-kopos
condition_number = lw_konp-knumh
period_datab = lv_datab
period_datbi = lv_datbi
agreement_knuma = lw_kona-knuma
IMPORTING
turn_over = lw_s060.
Errors?
IF NOT lw_s060 IS INITIAL AND
lw_s060-krech IS INITIAL.
MESSAGE e779(vk) RAISING other_errors.
ENDIF.
If condition is active (not logically deleted).
IF lw_konp-loevm_ko = space.
record found?
IF lw_s060-knumh IS INITIAL.
lv_kstbs = 0.
lv_kawrt = 0.
ELSE.
lv_kawrt = lw_s060-kawrt_k.
lv_kstbs = lw_s060-kstbs.
ENDIF.
IF lw_konp-stfkz = 'D'.
Tiered scales calculation
CALL FUNCTION 'SD_GRADUATED_SCALE_EVALUATION'
EXPORTING
i_arrangement = lw_kona
i_condition_record = konp
i_scale_base = lv_kstbs
i_condition_base = lv_kawrt
i_bukrs = lw_kona-bukrs
i_currency_date = lv_datbi
i_value_rounding = c_yes
i_t001 = t001
IMPORTING
e_arrang_value = lv_kwert
TABLES
t_condition_scale = lt_scales
EXCEPTIONS
error_message = 1.
ELSE.
Determine condition rate (non-tiered calculation)
CALL FUNCTION 'SD_BONUS_RATE_FROM_SCALE'
EXPORTING
condition_record = konp
scale_base = lv_kstbs
IMPORTING
bonus_rate = lv_kbetr
TABLES
condition_scale = lt_scales.
Determine rebate amount for the condition
CALL FUNCTION 'SD_BONUS_VALUE_CALCULATION'
EXPORTING
calculation_rule = lw_konp-krech
condition_base = lv_kawrt
condition_type = lw_konp-kschl
currency = lw_kona-waers
currency_date = lw_kona-datbi
price_currency = lw_konp-konwa
price_unit = lw_konp-kpein
price_uom = lw_konp-kmein
cumul_currency = lw_konp-kwaeh
rate = lv_kbetr
sales_organization = lw_kona-vkorg
IMPORTING
bonus_value = lv_kwert
EXCEPTIONS
error_message = 01.
ENDIF.
IF sy-subrc <> 0.
Error?
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
RAISING other_errors.
ENDIF.
Percentage?
lv_accrued_amt = lv_accrued_amt + lv_kwert.
clear lv_kwert.
IF lw_s060-krech NE c_krech_a.
lv_reversal_amt = lv_reversal_amt + lw_s060-rrwrt.
ENDIF.
ELSE.
Clear the values
CLEAR: lv_kawrt, lv_kstbs, lv_kwert, lv_kbetr.
ENDIF.
ENDLOOP.
SELECT SUM( vbap~netwr )
INTO lv_settled_amt
FROM vbak
INNER JOIN vbap
ON vbapvbeln EQ vbakvbeln
INNER JOIN vbkd
ON vbkdvbeln EQ vbakvbeln
WHERE vbak~knuma = lw_kona-knuma
AND vbak~auart IN (c_auart_b1,c_auart_b3)
AND vbap~abgru EQ space
AND vbkd~fbuda BETWEEN iv_from_date
AND iv_to_date
ev_accrued_amount = - lv_accrued_amt.
ev_settled_amount = lv_settled_amt.
ev_accr_rev_amount = lv_reversal_amt.
ENDFUNCTION.
Regards,
Ronn
Can you provide more details that's a very vague question. You research industry vendors such as MobileIron, Zenprise, AirWatch, BoxTone, etc. or configure your own server and push configuration profiles. Apple themselves do not offer any services of their own that they resell.
Similar Messages
-
How to get rounded corners for Grid in flex 3.0
Hi All,
I was trying to make rounded corners for ‘Advanced Datagrid’ and ‘Datagrid’ components of Flex 3.0. But was unable to do so.
Also tried searching the net for some solution but didn’t get much help for the problem.
I tried making a skin and applying it , but still wasn’t successful.
Can you please guide me in making the corners rounded for the 2 components.
Thanks
RSI
e.g of my code
<mx:AdvancedDataGrid id="myADG"
headerBackgroundSkin="com.coresecurity.ui.view.skin.RoundImageSkin" dataProvider="{dpFlat}"
width="100%" height="100%">
<mx:Columns>
<mx:AdvancedDataGridColumn headerText= “1” dataField="1"/>
<mx:AdvancedDataGridColumn headerText = “ 2” dataField="2"/>
<mx:AdvancedDataGridColumn dataField="3"
headerText="3"/>
</mx:Columns>
</mx:AdvancedDataGrid>
RoundImageSkin.as
public class RoundImageSkin extends RectangularBorder
public RoundImageSkin(){
super();
override protected function updateDisplayList(unscaledWidth:Number, unscaledHeight:Number):void
var cls:Object = getStyle("backgroundImage");
var bmp:Bitmap = new cls();
graphics.clear();
graphics.beginBitmapFill(bmp.bitmapData);
graphics.drawRoundRect(0, 0, unscaledWidth, unscaledHeight,5);You aren't likely to get any of your questions answered for the reasons you already identified, and I imagine you would not find a tutorial for something as complex as what you are prusuong.. You need to learn how to design with Flash, and a forum is not a place where you are going to get that kind of help. If you have code and/or a design issue that you need help with then that's where a forum might be of use to you.
-
my iOS remains the same as whats inside my iPhone I bought it 18months ago, which is version 4.2.1, I am told by an Apple shop that its too old to do a proper update, unless all my data will have to be erased !! is this true ? if so, how to get round it ? Chuck
Be sure to do a backup before updating as protection. Photos should
be synced with your computer, music should be in iTunes, documents
should be backed up on your computer as should contacts in whatever
program you use on your computer. You should already have backups
of your important information to prevent loss in case of theft, crash,
physical damage. The question is not if your hard drive will crash but
when, and you iPhone is not a backup device nor fit for the only
source of any document, picture, music, movie, contact or otherwise
irreplaceable information. -
How to get Open Balance for the year and Total Ending Balance?
For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM -
A^b = n ,How to get the value for a ?
a^b = n ===> n = Math.pow(a,b)
How to get the value for a ?
dose Java have API to get the value for a ?
Thanks for help~~~a^b = n
=>
a = n^(1/b)
So,
a = Math.pow(n,1.0/b) -
How to Get Missing Dates for Each Support Ticket In My Query?
Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
How to get the date for the first monday of each month
Dear Members,
How to get the date for the first monday of each month.
I have written the following code
SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
But it look bith complex.
Abhishek
Edited by: 9999999 on Mar 8, 2013 4:30 AMUse IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
select sysdate current_date,
trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
from dual
CURRENT_D FIRST_MON
08-MAR-13 04-MAR-13
SQL> Below is list of first monday of the month for this year:
with t as(
select add_months(date '2013-1-1',level-1) dt
from dual
connect by level <= 12
select dt first_of_the_month,
trunc(dt + 6,'iw') first_monday_the_month
from t
FIRST_OF_ FIRST_MON
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13
FIRST_OF_ FIRST_MON
01-DEC-13 02-DEC-13
12 rows selected.
SQL> SY. -
Qry:How to get different price for each price list (variable area) in order
1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen -
How to get column names for a specific view in the scheme?
how to get column names for a specific view in the scheme?
TIA
Don't have DD on the wall anymore....or this?
SQL> select text from ALL_VIEWS
2 where VIEW_NAME
3 ='EMP_VIEW';
TEXT
SELECT empno,ename FROM EMP
WHERE empno=10 -
How to get Alerts mail for adapter engine errors in SAP PI 7.0
Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed. -
How to get the ItemKey for a Workflow triggered by an event in Oracle Apps
Hello,
I have added a custom sub process to the seeded "OM Order Header" workflow. The process sends a notification. There are a few attributes in the body of the message tied to this notification, to which I am trying to assign values to using the syntax:
SetItemAttrText (itemtype, itemkey, attrname, attrvalue).
I have the internal names for the item type and attribute name, but don't know how to get the value for the item key. I understand the item key is supposed to be unique for each item type and is automatically generated by the workflow engine when the work flow fires. Is there a built-in function or some means to get this value?
Regards,
SmitaHave you tried to query WF_ITEMS? -- http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=WF_ITEMS&c_owner=APPLSYS&c_type=TABLE
bde_wf_item.sql - Runtime Data of a Single Workflow Item [ID 187071.1]
Thanks,
Hussein -
Since updating because it says i need itunes 11 however it will not install because i need a newer version of mac os, any ideas how to get round this ?
Update your Mac OS level.
-
How to get the order for these decoration​s?
hello,
I want to programatically resize all the controls, indicators and decorations on the front panel.
I am getting the references of all the controls and indicators and able to resize them, as each n every control and indicator has a tabbing order set to it.
I am also getting the references of all the decoration used on the front panel but not able to get the order.
how to get the order for these decorations?The order of the decorations is the same as the back to front order. So you
can change it by bringing decorations to front, or sending them to the back.
It has been suggested many times that decorations should have labels as well
as controls, but at the moment there is no way to tell which reference
belongs to which decoration (besides position and order).
Regards,
Wiebe. -
How to get wage type for every time record
Hi Pros,
I am using DS 0CA_TS_IS_1, it includes report time type (0REPTT), but not have wage type. in CATSDB, I fied fields for attendance/absence type and wage type. but not every time record has wage type. can you please tell me how to get wage type for every time record? what is relation between reporting time type, attendance/absence type and wage typs?Hello,
Can you talk to your HR/T&E functional consultant if they populate these values in CATSDB table using standard way or if there are custom fields that are in CATSDB OR any other table which can be used to meed the requirements
Thanks
Abhishek Shanbhigue -
How to get a reference for custom controller
Hi All,
I am working with the custom controller but i dont know how to call the functionality of custom controller into a view controller.For accessing component controller functionality we have a attribute wd_comp_controller in view controller.Like this how to get a refernce for the custom controller.
Thanks in Advance.hi,
Lets say view1 has the event ONACTIONNAVIGATE and you want to call a method 'start_navigation' in the custom controller named 'navigation'.
Use the following code.
METHOD onactionnavigate .
DATA lo_navigation_controller TYPE REF TO ig_navigation.
lo_navigation_controller = wd_this->get_navigation_ctr( ).
CASE navigation_type.
WHEN 'BACKWARD'.
lo_navigation_controller->start_navigation( if_fitv_fpm_api=>gc_navigate_backward ).
WHEN 'FORWARD'.
lo_navigation_controller->start_navigation( if_fitv_fpm_api=>gc_navigate_forward ).
ENDCASE.
ENDMETHOD.
Thanks,
Rajkumar.S
Maybe you are looking for
-
Sudden and severe loss in AirPort reception
I use my TiBook at my desk (12 feet from wireless router) and on my couch (9 feet from wireless router). AirPort reception has been very strong (always five bars) for more than two years in these locations. I was even getting good, consistent recepti
-
Can I tether my computer to my iPad 3
I'm curious if there's a way to tether my computer to my iPad 3's 4g Internet connection. I love the speed of 4g it's absolutely amazing. I presently don't have cable Internet, because I just moved and Time Warner hasn't hooked it up yet. So I have h
-
Photoshop said to update the video driver. I downloaded the driver and I am the administrator account. When attempting to instll I get the message "system Canot find the specified path" I'm using Windows Vista Home Premion on HP Pavillion a6110n
-
Opening files with serialized objects even if class definition has changed.
Dear all, We are deploying an application wich saves serialized objects. But when changing something in the code and especially in the serialized classes we are not able to open files which have been saved with the old 'outfit' of the class. I think,
-
Hi Guys, We have an issue - i.e. when we create STO manually in ECC 6.0 it always add extra one day to the good issue lead time. I have checked and we have no plan delivery date on the material master, 'pick & load' at the shipping point is standar