How to get Selection Screen in WAD?

Hi Experts,
I have designed a WAD where when executed, the selection screen does not come. It goes straight to the report.
I have used a table for the Data Providers.
What settings I have to make for the selection screen to pop out?
Kindly guide me.
With kind regards,
Shreeem.

Hi,
Have a look at below thread,
Display of the selection screen in WAD
Hope this helps.
Regards,
Mani

Similar Messages

How to force selection screen in WAD Report

Hi Gurus,
How do we force a variable selection screen in WAD Report. We are in SP 10.
Thanks
Syed

Hi Karthik,
Iam not sure for some reason, when I select web_template and click on Web Parameters, there nothing available below Behaviour section. However when I create a new Analysis Item and see its properties, the Behaviour section shows only Allow Navigation & Only Hierarchy options.
Should I reinstall my front end. We are in SP10.
Appreciate your response.

How to get selection screen elements and its table reference of a report ?

halo experts
How can I get selection screen elements and its table reference of a report ? . I tried rs_refresh_from_select_options. But I am unable to get the table and field it is referring to
For eg if my selection screen 1000 is
parameters: p_carrid type spfli-carrid,
select-options :s-_connid type sflight-connid.
is there any Fm or method which gives me what are the screen elements( p_carrid and s_connid ) and what table( splfi and sflight ) and field ( carrid and conid )it is referring to ?

The following code is an example of how you might dynamically determine all your PARAMETERS and SELECT-OPTIONS variables at run time. The PARAMETERS and SELECT-OPTIONS only point to a dictionary element--not a specific table. Even though you may say "spfli-carrid" or "sflight-connid", the data type really references the dictionary type and not a specific table/structure.
REPORT ZTEST_PROG.
TABLES sflight.
DATA:
       screen_tab TYPE STANDARD TABLE OF screen,
       wa_screen TYPE screen,
       scrn_nm TYPE string,
       scrn_leftover TYPE string,
       l_type TYPE REF TO cl_abap_typedescr,
       typ_nm TYPE string,
       typ_pre TYPE string.
FIELD-SYMBOLS <fs_data> TYPE ANY.
PARAMETERS p_carrid TYPE spfli-carrid.
SELECT-OPTIONS s_connid FOR sflight-connid.
INITIALIZATION.
LOOP AT SCREEN.
    IF screen-group3 = 'PAR'
      OR screen-group3 = 'LOW'.
        APPEND screen TO screen_tab.
    ENDIF.
ENDLOOP.
START-OF-SELECTION.
LOOP AT screen_tab INTO wa_screen.
    ASSIGN (wa_screen-name) TO <fs_data>.
    l_type = cl_abap_typedescr=>describe_by_data( <fs_data> ).
    IF wa_screen-group3 = 'LOW'.
      SPLIT wa_screen-name AT '-' INTO scrn_nm scrn_leftover.
      TRANSLATE scrn_nm TO UPPER CASE.
    ELSE.
      scrn_nm = wa_screen-name.
    ENDIF.
    SPLIT l_type->absolute_name AT '=' INTO typ_pre typ_nm.
    WRITE:
             / 'Screen Name: ', scrn_nm,
             / 'DDIC Type:    ', typ_nm.
ENDLOOP.
When you get into defining internal tables you can determine those at run time with cl_abap_structdescr. The following is an example of how you might do that. You can loop through the "components_table" and evaluate each field of the structure in this way.
DATA: structure_reference TYPE REF TO cl_abap_structdescr,
      components_table TYPE abap_compdescr_tab,
      components_structure LIKE LINE OF components_table.
structure_reference ?= cl_abap_structdescr=>describe_by_data( any_structure ).
components_table = structure_reference->components.
I don't know if this answers any of your questions but I hope that some of it is useful.

How to design selection screen with WAD 3.x Web Items

Hi Guruu2019s,
I have a requirement where I need to design a selection screen by using WAD 3.x web items. In the selection screen we have to include the Query Description - in the left corner of the selection screen, Name of Sales Person u2013 left side of the screen, Date from and Date to u2013 right side of the selection screen, User ID and User Name u2013 on the top right of the selection screen etc., after this on the bottom of the selection screen I have to include the pushbutton RUN REPORT.
After filling all the above parameters and click on Run Report it has to trigger another URL link which contains consolidated Sales CRM Report.
Could any one suggest me and provide me the idea on developing the selection screen with WAD 3.x Web items and is there any other interface to trigger the other URL link when I click on Run Report.
Regards
Venkat

no replies. Closing the incident

How to get selection screen variant name of a report ?

Hi Experts,
Can any body please suggest, how I can get the variant name that was selected when a report program was being scheduled in background?
I am using system field SY-SLSET but it is working only at foregrounf execution.In background mode it holds different value like '&0000000000038'.
Thanks in advance.

Hi !
When running the program in foreground (SE38 -> F8) or in a background job (SM36), sy-slrel is correctly filled.
When running in background via SE38 transaction (run in background : F9), sy-slrel is not filled correctly (&000010 for example).
However, in the second case, you still are in foreground when in the selection screen. Thus this simple but quite efficient idea of [Vinod Vemuru|http://wiki.sdn.sap.com/wiki/display/~ncz6anw] :
http://wiki.sdn.sap.com/wiki/display/ABAP/Howtogetthevariantnamewhenrunningthereportinbackgroundfromselectionscreen

How to get selection screen details of any report dynamically

Hi
We have a requirement where we need to submit different reports based upon certain conditions. I need to know FM or other way around to fetch the details of selection screen (name of selection screen parameters or select option and whether its a parameter or select option) any report. Please guide me in this regard.
Regards
Swetabh

DATA : SEL_TAB TYPE RSPARAMS OCCURS 0.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
    EXPORTING
      CURR_REPORT           = 'ZRP_PACKING_INVOICE_MAIN'
    TABLES
      SELECTION_TABLE       = SEL_TAB.
    SUBMIT ZSH_SD_INVOICE_NEW WITH
                                    SELECTION-TABLE SEL_TAB AND RETURN.
above f.m will get the all details of selection screen and give u in internal table and that can be passed to submit statement...

Get selection screen parameters from sap query

Hello. I use SAP Query Reporting, so I added a report assignment for detailing (sq01 -> Change button -> Goto -> Report Assignment -> Insert row -> Other type row -> Abap Report Program)
and put there ABAP program.
When I run query and press CtrlShiftF1 (or double click) It calls my abap program.
So the question is: how to get selection screen parameters in my program ?
to be more precise I want to get date parameter (begda, endda)
Thanks a lot.

There is a Z query which I can see in sq01. I set reporting period and run the query; when I run it, it gives me the employee list.
So I wrote the abap report to get an employee details, customized query as I mentioned above.
The query calls my report and I need to get parameters.
SELECTION-SCREEN BEGIN OF BLOCK frm1 WITH FRAME TITLE text-001.
PARAMETER : p_pernr LIKE p0001-pernr OBLIGATORY MATCHCODE OBJECT prem.
PARAMETER : p_date LIKE sy-datum.
SELECTION-SCREEN END OF BLOCK frm1.
Parameter
p_pernr
passes normal. ALV Query contains it, but I'd like to get one more parameter from selection screen of the query and don't know how to get it.

WAD template with BSP Application - how to read selection screen values

Hello,
I've created Web template with Web Application Designer (WAD).
I would like to extend that page with BSP Application...
Purpuse of this application is to read some information from tables
on BW transaction server and display them within Web page.
Question: How to read selection screen values from a Web template ?
Thanks for any help,
Pawel Borowiec

Hi,
The selection screen parameters will be on an inputField, so try and get the is of the inputfield generated by doing View source...
And once you get the inputfield Id, you can read the value in the InputField(InF) by
using the following code...!
data : if_value type ref to cl_htmlb_inputfield.
data : variable type string.
if_value ?= cl_htmlb_manager=>get_data( request = request
                                            name    = 'inputField'
                                            id      = 'InF_ID_here'
       if if_value->value is not initial.
         variable = if_value->value.
       endif.
Hope this helps.
<b><i>Do reward each useful answer..!</i></b>
Thanks,
Tatvagna.

How can I get selection screen values from outside of program?

Hi. all.
Now. I'm developing moritoring systems and I have problems. for getting selection screen values in runtime. Is there any function, methods or structure to know this?
I'd like to get selection screen values while several programs working in runtime and update these values to table to show current system's status and input values for users in real time.
For example.
Now. 3 PGMs are working on systems.
each PGM is ZAAA01, ZAAA02, ZAAA03.
and ZAAA01 needs input parameter P01, ZAAA02 needs input parameter P02, ZAAA03 needs input parameter P03.
In this case, I have to know values of P01, P02 and P03.
The mornitoring systems will show current working status of PGMs(ZAAA01~03)' and these PGMs' input values.
As fas as I know, the structure 'SCREEN' can be used in each PGM for runtime. Is there any SAP system structure or something else for this purpose?
I hope your hopeful repsponse.
Thanks.

Umm..I need to explain more about this.
of course I know SET, GET PARAMETERS.
But I'd like to minimize coding for each PGM level.
I have over hundreds PGMs and I have to develop the PGM(including tables and structures) that mornitor
all of those PGMs on a report in real-time.
This PGM is kind of Process Manager.
First I should know dialogue job PGM and background job that pass parameters using SAP(ABAP) Memory.
And then I have to update those PGMs' input values via screens into tables in real-time.
So, I couldn't use SET,GET PARAMETERS for this PGM.
I want to know methods that can be used for getting information about runtime PGMs' selection screen field values in SAP systems wide.
Please help me some one knows this.

How to get selected value from selectOneRadio ???

Hi...i want to how to get selected value from selectOneRadio and use it in another page and in backing bean.
Note i have about 10 selectOneRadio group in one page i want to know value of each one of them.
Plzzzzzzzz i need help

You have a datatable in which each row is a question, correct?
Also in each row you have 5 possible answers that are in a radio, correct?
So,
You need to put in your datatable model, a question, and a list of answers (5 in yor case) and the selected one.
So you will have a get to the question, an SelectItem[] list to populate the radios and another get/set to the selected question.
ex:
<h:selectOneRadio value="#{notas.selectedString}" id="rb">
<f:selectItem itemValue="#{notas.valuesList}"/>
</h:selectOneRadio>
Search the web for examples like yours.

How to get selected value from OADefaultListBean.

Hi All,
How to get selected value from OADefaultListBean ?
Thanks,

Hi,
To identify the user's selection(s) when the page is submitted, you would add the following logic to your processFormRequest() method:
OADefaultListBean list =
(OADefaultListBean)webBean.findChildRecursive("positionsList");
String name = list.getName();
String[] selectedValues = pageContext.getParameterValues(name);
To retrieve all the values in the list box, call list.getOptionsData().
--Prasanna

How to get selected row index of a Table ?

hi gurus,I'm new to Webdynpro for abap
I'm displaying just Flight details in a Table so
how to get selected row index of a Table and need to be display in Message manager.

Hi,
For getting the row index use the following code.
DATA lo_nd_node TYPE REF TO if_wd_context_node.
DATA lo_el_node TYPE REF TO if_wd_context_element.
DATA index TYPE i.
* navigate from <CONTEXT> to <NODE> via lead selection
lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_node ).
lo_el_node = lo_nd_node->get_lead_selection( ).
index = lo_el_node->get_index( ).
node is the name of the node which is binded to the table.
For printing the message u can use code wizard.
Press ctrl-F7. Now Select generate message.
IN this select the method REPORT_SUCCESS
In the code now u can give index to Message text Exporting parameter. Comment receiving parameter.
Write the whole code in onLeadSelect of the table.
Regards,
Pankaj Aggarwal

How to get selected row keys from RichSelectManyCheckbox

Adf Table has getSelectedRowKeys but SelectManyChekcbox does not has anything similar. Can you tell me how to get selected row keys programmatically for RichSelectManyCheckbox?

Hi User,
selectManyCheckbox component's value property holds the selected items values. Bind this property to some bean variable(of type list) so that you can get the selected values by accessing the bean property.
Sireesha

How to get 10 screens on a Mac Pro

Hi All:
I'm trying to figure out how to get 10 screens working together like one big desktop on a Mac Pro.
Currently I have a 12core 2010 Mac Pro with 2 ATI 5770 cards driving 6 30" cinema displays. Each of these cards are double wide.
I want to connect 4 65" LED displays.
Does anyone have an idea how I can do this? The Mac Pro has only 4 slots. The two 5770s take up 3 spaces (because of their doulbe wide size). The last slot has a OWC solidstate drive there. I guess I could remove that and use just a regular SATA SSD if need be, but would love to get this done with just 3 slots.
So some thoughts. There are two possible ways (ideal, and less ideal) that I can think of:
IDEAL way:
The ideal would be to find a single wide card that supports 5 or 6 displays, and use that. I know that some people have had success flashing single wide cards, but it's not clear if all the ports are usable. See here for an ATI card with 3 ports, single slot, that's been flashed:
http://www.ebay.com/itm/Apple-Mac-Pro-ATI-Radeon-HD-5770-1GB-Video-Card-Single-S lot-5870-/150928552679?pt=PCC_Video_TV_Cards&hash=item23240af2e7
Also, it's not clear if you could get 4 of those cards working to drive all 10 screens.
However, there are single wide 5/6 display cards like this:
http://www.newegg.com/Product/Product.aspx?Item=N82E16814150566&nm_mc=AFC-C8Junc tion&cm_mmc=AFC-C8Junction-_-na-_-na-_-na&AID=10440897&PID=3332167&SID=u00000687
Has any seen or know of a 5 port card like the above that has been flashed to work in a Mac Pro?
LESS ideal way:
My guess is there are some PCI expansion chasis, and I can just put in 2 more regular ATI 5770s there. I found this:
http://www.jmr.com/en/products/14/3-slot-pcie-extender/
and this
http://www.magma.com/catalog/classic-pci-expansion
I'm not sure how well these extenders work.
EVEN LESS ideal way:
Perhaps getting another Mac or PC and somehow VNC'ing in is an option, but this likely would be too laggy to run video from one computer to the other. The ideal is to just treat the system like one giant screen, but I'm open to hearing any experiences/suggestions on getting this to work.
Thanks so much!

After reading up on it, it seems that the 6850 supports 3 displays. So perhaps I could do one 6870 (4 displays) in slot one, and then 2 single slot 6850's or 5770's in slots 2 and 3. This would give 10 displays.
I have 3 questions then:
(1) What is the quietest 6870 card people have successfully used in a Mac Pro?
(2) What is quietest single slot 6850 or 5770 card successfully used in a Mac Pro?
(3) Has anyone gotten thiis 5770 single slot card to work on a Mac Pro, and have they gotten 5 display ports to work?
http://xfxforce.com/en-gb/Products/Graphics-Cards/AMD/ATI-Radeon-HD-5000/ATI-Rad eon-HD-5770-Single-Slot.aspx

How to get full screen caller pic in ios 7.1

How to get full screen caller pic in ios 7.1.Please help me

Haha .. I have seen one million post on this issue since 7.1 was released. Everybody hates it and it is perhaps Apple's stupidest design decision. I, personally, happen to like it ... or not mind it as much either way, I should say.
But that's not what you asked ... Apple thought it was best for some odd reason to change the full screen pics to an itty bitty circle. As a previous poster said, it cannot be changed. But be sure to go to Apple's feedback website and let them know you are unhappy about it. I sense an iOS 7.1.1 coming out REAL soon!

How to get Selection Screen in WAD?

Similar Messages

Maybe you are looking for