How to get Status of Archived Delivery Document line item

Hi Folks,
I want read the Status of line item of archived delivery document.
As delivery is archived, it is not found in LIKP/LIPS. So I got the archived delivery document from VBFA table.But this does not contain the status field.
Is there any program or Function modules which reads this status.
Please help.
Thanks in advance.

Check field VBUK-GBSTK (Overall processing status of document).
regards,
srinivas
<b>*reward for useful answers*</b>

Similar Messages

  • Tcode FV50: How to find long text in FI Document line item Before Saving.

    Hi,
    How to find long text in FI Document line item.
    During Parking of the FI document through Tcode FV50 i m giving the some text in the long text not in the text field.
    I would like to validate the Long Text Before Saving in user exit "U300" under  the  "Sunstitution" .
    Please anybody can be help me out where exactly this long text is going to be stored or in which internal table or memory id.
    Please give me the answer as soon as possible .
    Note:- Read_Text function module is not useful. Because Read_text useful after saving document.

    Hi Amit,
    In application area FINANCIAL ACCOUNTING , go for node LINE ITEM. Here create a step & maintain the prerequisite as per your requirement & in the check you can mention the code or you can direct it to a custom program like ZFI_RGGBR000.
    Here while maintaining the check you will get structures BKPF & BSEG in which you will get the desired field you are looking for.
    Just try to explore in your system how the other validations are maintained.
    After you are done with all your code, you have to run the regeneration program RGUGBR00.
    Here utmost care should be taken while running regeneration program, you should select all the checkboxes in the selection screen except  GENERATE SETS, GEN SUBSTN ROUTNS IN ALL CLNTS  & TRACE PROG. GENERATE CALLS .
    Hope this make your doubt clear.
    Regards
    Abhii

  • How to get Characteristic Values assigned to the line item of Sales Order?

    Hi,
    I want to get the Characteristic Values( Variant Configuration )assigned to First Line Item of Sales Order.
    I was using the Fn. Mod.: VC_I_GET_CONFIGURATION_IBASE,
    this fn. mod. giving all the Characters but not the assigned characteristic values.
    Is there any other way to find characteristic values of sales order.
    Thanks,
    vinayak.
    Message was edited by: vinayaga sundaram

    For example, please see this example program.
    It lists the characteristic names, the values, and the description of the values which are tied to a sales document.
    report zrich_0001.
    * Internal Table for Characteristic Data
    data: begin of i_char occurs 0.
            include structure comw.
    data: end of i_char.
    data: xcabn type cabn.
    data: begin of xcawn,
          atwtb type cawnt-atwtb,
          end of xcawn.
    data: xvbap type vbap.
    parameters: p_vbeln type vbap-vbeln,
                p_posnr type vbap-posnr.
    start-of-selection.
      select single * from vbap into xvbap
                 where vbeln = p_vbeln
                   and posnr = p_posnr.
      clear i_char.  refresh i_char.
    * Retrieve Characteristics.
      call function 'CUD0_GET_VAL_FROM_INSTANCE'
           exporting
                instance           = xvbap-cuobj
           tables
                attributes         = i_char
           exceptions
                instance_not_found = 1.
      loop at i_char.
        clear xcabn.
        select single * from cabn into xcabn
                 where atinn = i_char-atinn.
        clear xcawn.
        select single cawnt~atwtb into xcawn
                   from cawn
                     inner join cawnt
                       on cawn~atinn = cawnt~atinn
                      and cawn~atzhl = cawnt~atzhl
                          where cawn~atinn = i_char-atinn
                            and cawn~atwrt = i_char-atwrt.
        write:/ xcabn-atnam, i_char-atwrt, xcawn-atwtb.
      endloop.
    Regards,
    RIch Heilman

  • How to read long text in Document line item

    Hi,
    How to read long text in FI Document line item.

    Use Read_text function module.
    you need to pass
    ID
    LANGUAGE
    NAME
    OBJECT   to the function moduel
    To find the Text id name language and object these are the following steps. Example: FB02
    1. goto FB02, Enter Document number
    2. from menuselect Goto>Header-->header Text..... New window will be displayed 
    3. select the Header Text. here you can see all the text. 
    4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper. 
    5. in the Next window you will find Text Name. Text ID, Language. etc...
    Regards,
    Lalit Mohan Gupta.

  • Post long text for document line item via FI-GL Inbound IDoc

    Hi guru,
    I am trying post extension ZFIDCP02 linked basic type FIDCCP02 and message type FIDCC2 IDoc in R/3 (4.6c) via IBM Websphere (Inbound IDoc),
    I am use inbound function module IDOC_INPUT_FIDCC2 and activate exit 008 (EXIT_SAPLF050_008) and exit 002 (EXIT_SAPLF050_002),
    In the extension ZFIDCP02 and under E1FISEG, I am add my segment  ZITEXT include field TDSPRAS, TDID, TDOBJECT, TDLINE.
    I am send  ZFIDCP02 IDoc via IBM Websphere no error  but all field TDSPRAS, TDID, TDOBJECT, TDLINE in my segment  ZITEXT not post in FI-GL.
    How can I  post long text for document line item (ZITEXT) in FI-GL ?.
    and I'm mean post ZITEXT to bank statement via IDOC.
    Please throw light on this  and  may be I  'm want solution or example ABAP code for exit 002 (EXIT_SAPLF050_002).
    Thanks in advance,
    Akkapong Pirachai
    CAT Telecom
    Edited by: Akkapong Pirachai on Aug 20, 2008 7:40 AM

    Close question because long time for answer.

  • CRM document - how to get status duration?

    Dear all,
    I extract data CRM -> BI  using standard datasources: 0CRM_SRV_PROCESS_H, 0CRM_COMPLAINTS_I, etc
    I need build a report with status duration of documents
    For example, if document was processed 4 days in statuses OPEN > IN PROCESS > VALIDATION > CLOSED report should be following:
    OPEN - 1 day
    IN PROCESS - 2 days
    VALIDATION - 1 day
    Each CRM datasource has start date and last change date of the document
    But there is no fields which stores date or duration of intermediate status change
    Could you please give an advice - how to get status duration?
    Thanks in advance

    Hi Oleg,
    Please check whether following standard datasources could meet your requirements:
    0CRM_TSS_DTRACK  CRM Tracking of Document Processing Lifecycles
    0CRM_TSS_PKYF       Timestamp Service: Performance Key Figures
    You can find the documents in transaction code SBIW, through IMG path
       Settings for Application-Specific DataSources (CRM)
           -> Settings for Extracting CRM Objects
                 ->  Define Extraction to Track the Document Processing Life Cycle   
                  -> Define Performance Key Figures for Time Stamp Service Analysis
    Best Regards,
    York

  • How to get status of transaction

    Hi Gurus,
    can anyone tell me how to get status of the transaction in crm.
    regards,

    hi vijay,
    what kind of transaction did you want to get the status ?
    for order, complaint, activity, and task, you can used function modul 'CRM_ORDER_READ' for getting status of the document.
    hopes it helps
    cheers

  • I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team.  I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where

    I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team.  I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where I do not have a Wi-Fi connections.  I need to be able access files without going to acrobat.com.  Help!!!@

    Post the PDF files to a web site. The browse to them in Safari on the iPad.  When you Open the files specify the Open to occur in Adobe Reader.  Then you can have/Save them in your Documents folder on the iPad.   An iPad has limited access to files otherwise.

  • How to get video from archived DVD projects (.dvdproj)

    how to get video from archived DVD projects (.dvdproj)

    Command (right) - click on the archived project file to open the package with the Finder. Go to the Contents/Resources/Assets/AV folder where the media files are stored.
    OT

  • Any one knows how to change "TransptnPlanng date" in delivery document?

    Deal All,
    Could any one provide the BAPI/FM that can change "TransptnPlanng" date/time in inbound/outbound delivery documents?
    I need to update the dates only in ABAP program based on external information.
    I tried WS_DELIVERY_UPDATE with the following parameters setup:
    VBKOK_WA-VBELN_VL = target delivery number
    VBKOK_WA-TDDAT = "12/12/2009"
    VBKOK_WA-TDUHR = "12:12:12"
    (for the other fields in structure VBKOK_WA, I leave them blank)
    DELIVERY = target delivery number
    After run the FM in test mode, no error returns but no data updated in the delivery... (dates not change)
    Do I need to specify all the other fields for the delivery (like delivery date, line item details etc) even though I just want to update two fields in the header of the delivery?
    Thanks & Regards,
    Wenling

    BAPI_OUTB_DELIVERY_CHANGE works in this case (just to change the date)
    Need to put "X" on the date field on structure BAPIOBDLVHDRCTRLCHG and need to use table BAPIDLVDEADLN with correct date type to update.
    Thank you all for your replies.

  • How to get two parameters in the same line of selection screen?

    hello
    i need to get my selection csreen like bellow.
    r1 radiobuttion  -some space --p1 parameter
    i should not get the parameter in the next line of  radiobuttion.
    how to get two parameters in the same line of selection screen?

    hi....
    modify the following code
    it will work
    SELECTION-SCREEN BEGIN OF BLOCK SL1 WITH FRAME TITLE TEXT-003.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 10(15) TEXT-001
                     FOR FIELD P1.
    SELECTION-SCREEN POSITION POS_LOW.
    PARAMETERS : P1 TYPE   C USER-COMMAND R2 RADIOBUTTON GROUP R2 DEFAULT 'X',
      P2 TYPE SCARR-CARRNAME,
      P3 TYPE CHAR1 RADIOBUTTON GROUP R2.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK SL1.

  • Retrieve Multiple Serial Numbers for given Delivery Document and Item

    Hello Experts,
                          I am currently working on a 2Lis datasource to extract Delivery information.Now it is required to append the
    datasource with field (say ZZSERNO) which should extract ALL Serial Numbers from OBJK table for a given Delivery Item.
    I know that there is a link between table SER01 and OBJK to retrieve the same.However, my concern is- C_T_Data table is
    already providing the Delivery Information and along with that I want to display ALL Serial numbers for a given Delivery Item.
    A delivery Item can have more that one serial number linked to it as what I see in VL03N for a Delivery document.
    So currently in RSA3, I retrieve say 1 record for a given Delivery Document and Item .Now an Item has say 10 Serial Numbers
    associated with it, so i should see 10 Records for that Delivery Document and Item, after executing RSA3.
    Please provide me with the CMOD logic to do so.

    Hi,
    You can Link LIPS and OBJK tables with Delivery and Del Item.........refer below for the code.
    1) Declare an Internal table of type OBJK with fields DEL DOC, DEL ITEM and ZZSERNO .
    2) Declare another Internal Table ITAB_LIPS of type LIPS with required fields say in your case *DEL DOC, DEL ITEM and ZZSERNO....etc.
    3) Use below select statement to extract records from LIPS into ITAB_LIPS that you have declared for to fetch LIPS data.
    Select DEL DOC, DEL ITEM ( here i have included only few fields but as per requirement please add fields here)   from
    LIPS into corresponding fields of Table ITAB_LIPS.
    4) write one more select statement to fetch Serial number data.
    Select DEL DOC, DEL ITEM ZZSERNO  from OBJK into corresponding fields of TABLE ITAB_OBJK for all entries in ITAB_LIPS
    where DEL DOC = ITAB_LIPS-DEL DOC and
                DEL ITEM = ITAB_LIPS-DEL ITEM.
    Loop at ITAB_OBJK.
    Read table ITAB_OBJK into ITAB_LIPS with keys DEL DOC    DEL ITEM.
    ITAB_LIPS-DEL DOC = ITAB_LIPS-DEL DOC
    ITAB_LIPS-DEL ITEM = ITAB_OBJK-DEL ITEM.
    IF SY-SUBRC = 0.
    ITAB_LIPS-ZZSERNO = ITAB_OBJK-ZZSERNO.
    ENDIF
    ENDLOOP.
    Hope the above code helps
    Sujan

  • How to get the baselinegrid position for a line?

    Hi All,
    How to get the baselinegrid position for a line in a paragraph?

    Hi,
    2nd line baseline grid for yourPara paragraph is:
    yourPara.lines[1].baseline;
    last line baseline is:
    yourPara.endBaseline;
    Jarek

  • I am getting blocks of black, vertical broken lines to right of cursor, around applications on desktop and over text on internet. I recently updated from OS X Tiger to Leopard on my G5 powermac. Can anyone advise how to get rid of the blocks of lines?

    I am getting blocks of black, vertical broken lines to right of cursor, around applications on desktop and over text on internet. I recently updated from OS X Tiger to Leopard on my G5 powermac. Can anyone advise how to get rid of the blocks of lines?

    What graphics card is installed?
    Have you looked inside to see if the interior is dusty?
    Is the graphics card dusty?
    If equipped, is the fan on the graphics card turning?
    Leopard uses the graphics card harder than Tiger, so weakness in the graphics card is more easily shown.

  • SCHEDULE AGREEMENT-DELIVERY SCHEDULE LINE ITEM PRINTING

    Scheduling agreement is created in ECC.
    Delivery schedule line items are generated using APO and CIFed over to ECC.
    Upon displaying in ME38 in ECC, the delivery schedule line items are appearing as required. The problem is that no output type is displayed for condition type LPET even though the settings are done & condition records are maintained.
    Can someone throw some light on this?

    Hi Anil ,
    Goto Transaction NACE , Select Application EL and then Click on O/p Types.
    Select your o/p and click on Processing routines.
    Make a copy of medium 1 and change it to 5. The program , Form , Form routine would remain the same.
    Maintain condition records with medium 5 in MN10.
    Ensure that email address exists in Vendor Master.
    Check with ur Basis to make sure that the setting are done in Transaction SCOT for sending document via PDF.
    Create a new Agreement and test it.
    Regards
    Ramesh Ch

Maybe you are looking for