How to get system and boot on one volume - currently on 2 volumes

I have ended up with 2 hard drives one of which has Windows 7 on one partition and the other one has 2 volumes each with Windows 8.1 installed. This 8.1 drive has one volume (D) marked as Active, Boot and the other volume (C) marked as System.
I want to make the C volume Active System and Boot and have the D volume for storage only. I need to make this change without losing data on either volume. Can this be done, if so which of the many partition operations is the appropriate
one. Would a free download such as EasUS be able to do it?

Similar Messages

How to get Max and Min in one line .

Hi Guys
I know the program which I did is stupid .. I am getting the result for max and min value?
But I how can I get the value of km, h, lit in one line
Equno..max_date,min_date,min_value_km..max_value_km....min_value_h...max_value_h...min_value_l...max_value_l
with my program i am getting the vlaue of max and min value but not in one line.
the main parameter is recdu which is KM,L,H
Can anyone tell me the logic please
REPORT ZFUEL LINE-SIZE 200 LINE-COUNT 75
NO STANDARD PAGE HEADING.
TABLES : equi,
equz,
imptt,
imrg,
eqkt,
iloa.
Type Declaration
TYPES: BEGIN OF ty_data ,
equnr type equnr, " Euipment no
eqktx type eqkt-eqktx, " Equipment Text
eqfnr type iloa-eqfnr, " Equipment Sort field
idate type imrg-idate, " Measuring Date
recdu type imrg-recdu, " Unit of measuring ='KM','L','H'
recdv type imrg-recdv, " Counter reading data
END OF ty_data.
TYPES: BEGIN OF ty_final,
equnr type equnr, " Equipment no
eqktx type eqkt-eqktx, " Equipment Text
eqfnr type iloa-eqfnr, " Equipment Sort field
min_date type imrg-idate, " Min Date
min_km type p decimals 2, " Max Km
max_km type p decimals 2, " Min km
t_max_min_km type i, " Total min_km-max_km
max_date type imrg-idate, " Max Date
min_hr type imrg-recdv, " Max hr
max_hr type imrg-recdv, " Min hr
t_max_min_hr type i, " Total min_hr-max_hr
min_lit type imrg-recdv, " Max lit
max_lit type imrg-recdv, " Min lit
t_max_min_lit type i, " Total min_lit-max_lit
fuel_con type p decimals 2, " Total_hrs / t_max_min_hr
km_l type p decimals 2, " km / L
lit_per_hr type i , " fuel comsumed / t_max_min_hr
END OF ty_final.
DATA: i_data TYPE TABLE OF ty_data, " internal table
wa_data TYPE ty_data, " work area
i_final TYPE TABLE OF ty_final, " internal table
wa_final TYPE ty_final. " work area
data: begin of itab occurs 0,
num type i,
end of itab.
data: v_min_1 type i,
v_max_1 type i,
min_km like imrg-recdv,
max_km like imrg-recdv,
min_l like imrg-recdv,
max_l like imrg-recdv,
max_dt like imrg-idate,
min_dt like imrg-idate,
t_ma_mi type p decimals 2,
V1 LIKE IMRG-RECDV ,
V2 LIKE IMRG-RECDV .
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: p_equnr FOR equi-equnr ,"no-extension no intervals,
p_idate FOR imrg-idate. "NO-EXTENSION NO INTERVALS OBLIGATORY,
"p_recdu FOR imrg-recdu NO-EXTENSION NO INTERVALS default 'KM' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN END OF BLOCK blk.
TOP-OF-PAGE.
FORMAT INTENSIFIED ON.
WRITE:/1(40) ' INVESTMENT LIMITED '.
WRITE:/50(40) ' FUEL CONSUMPTION REPORT ' CENTERED ,
2 'Page', sy-pagno.
FORMAT INTENSIFIED OFF.
WRITE:/50(40) '----
' CENTERED .
FORMAT INTENSIFIED ON.
WRITE:/2 sy-datum COLOR 3, sy-uzeit .
"WRITE:/1 S903-SPMON ."p_yearf.
ULINE.
"CENTERED.
write: /2 'Date From :'.
write: /2 'Equipment No :'.
write: /2 'Unit :'.
SKIP.
ULINE.
WRITE:/1 sy-vline,
2 'EQUIP NO', 10 sy-vline,
11 'NAME', 40 sy-vline,
41 'min date', 50 sy-vline,
51 'max date', 60 sy-vline,
61 'min km', 70 sy-vline,
71 'max km' , 80 sy-vline,
81 't_max_min_km', 90 sy-vline,
91 'min hr', 100 sy-vline,
101 'max hr', 110 sy-vline,
111 't_max_min_hr' , 120 sy-vline,
121 'min lit', 130 sy-vline,
131 'max lit', 140 sy-vline,
141 't_max_min_lit', 150 sy-vline,
151 'fuel con', 160 sy-vline,
161 'km_l', 170 sy-vline,
171 'lit_per_hr', 180 sy-vline.
FORMAT COLOR 3 ON.
ULINE.
END-OF-PAGE.
START-OF-SELECTION.
select aequnr deqktx feqfnr eidate erecdu erecdv
into table i_data
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~recdu = 'KM'.
        SORT i_data BY equnr idate descending .
        loop at i_data into wa_data.
        max_km = wa_data-recdv.
        min_km = wa_data-recdv.
    at new equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,'MAX KM',max_km EXPONENT 0 DECIMALS 2 color 7,wa_data-recdu .
    endat.
at end of equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,'MIN KM', min_km EXPONENT 0 DECIMALS 2 color 7, wa_data-recdu .
endat.
at end of equnr.
write: / '----
write: /50(80) 'Subtotal' COLOR 4 .
write:/ '----
endat.
endloop.
select aequnr deqktx feqfnr eidate erecdu erecdv
into table i_data
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~recdu = 'L'.
        SORT i_data BY equnr idate descending .
        loop at i_data into wa_data.
        max_km = wa_data-recdv.
        min_km = wa_data-recdv.
    at new equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,'MAX LIT',max_km EXPONENT 0 DECIMALS 2 color 7,wa_data-recdu .
    endat.
at end of equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,'MIN LIT', min_km EXPONENT 0 DECIMALS 2 color 7, wa_data-recdu .
endat.
at end of equnr.
write: / '----
write: /50(80) 'Subtotal' COLOR 4 .
write:/ '----
endat.ENDLOOP.
select aequnr deqktx feqfnr eidate erecdu erecdv
into table i_data
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~recdu = 'H'.
        SORT i_data BY equnr idate descending .
        loop at i_data into wa_data.
        max_km = wa_data-recdv.
        min_km = wa_data-recdv.
    at new equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,'MAX H',max_km EXPONENT 0 DECIMALS 2 color 7,wa_data-recdu .
    endat.
at end of equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,'MIN H', min_h EXPONENT 0 DECIMALS 2 color 7, wa_data-recdu .
endat.
at end of equnr.
write: / '----
write: /50(80) 'Subtotal' COLOR 4 .
write:/ '----
endat.
endloop.

Hi Guys
How can I split the max and min value with if condition for KM L AND H as below
I am getting the km value correctly but rest fields for L and H (lit and hours) it is not ?
Please comment.
*APPEND wa_data to i_data.
        SORT i_data BY equnr idate descending .
        loop at i_data into wa_data.
        if wa_data-recdu = 'KM'.
        max_km = wa_data-recdv.
        min_km = wa_data-recdv.
        endif.
        if wa_data-recdu ='H'.
        max_h = wa_data-recdv.
        min_h = wa_data-recdv.
        endif.
        if wa_data-recdu ='L'.
        max_l = wa_data-recdv.
        min_l = wa_data-recdv.
       endif.
    at new equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,
        'Min KM',min_km EXPONENT 0 DECIMALS 2 color 7 ,
         'Min H',min_h EXPONENT 0 DECIMALS 2 color 7 ,
          'Min L',min_l EXPONENT 0 DECIMALS 2 color 7.
    endat.
at end of equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,
        'Max KM', max_km EXPONENT 0 DECIMALS 2 color 7,
        'Max H', max_h EXPONENT 0 DECIMALS 2 color 7,
        'Max L', max_l EXPONENT 0 DECIMALS 2 color 7.
endat.
regards
Piroz

How to get audio and video in one file

hi...I am "premiere beginner user" and I have a simple question , I think..:)...Every time when I am trying to export media out from my premiere (using media encoder) I get video file and some audio files, but what I need is only ONE file, that contains both (audio and video)..for example , I have edited film in hd quality and I want it to export, I choose h.264 format(make some settings,pal,audio quality...) and when it´s "all done", only "result" I get is one video file and two audio files and they are not together :).....so please help mme anyone..ok and as you can see I am not from english speaking country, so sorry for my english...thanks for help....

There is no indication that something is out-of-sync or the ability to move/slip into sync like in FCE/FCP.
To the best of my knowledge, using match frame and overwriting the video with video+audio (or attaching it as a connected clip if you don't want to overwrite the video, which might have effects applied) is the best way to do this.
You can use the blade tool first in the timeline to get just the section you want to get back into sync. Make cuts so that you have a single clip that needs the audio resynced, select it, and use shift-F to select the original synced clip in the Event Browser. Make sure your play head is at the beginning of this video clip in the timeline. Press option-2, then 'q', and now you have the audio back in your timeline, synced with the video. Delete the old, no-longer-synced audio and you should be set.

How to get system date and time?

Can someone show me a code on how to get system date and time.
Thanks!

there is one really easy way to get system time, the api gives a great example of code on this. use gregorian calendar, which you'll find in the api under GregorianCalendar. You only need to create one instance of GC, ie Calendar time = new GregorianCalendar();
you save seconds, minute and hours into int values, so you don't have to access the system time every second, you can create a thread which adds one to the int second value, if oyu see what i mean, for example, i have saved the hours, minutes and seconds as int values;
int hour, minute, second;
i can then create a thread (Thread thread = new Thread(this) and run it like:
Calendar time;
int hour, minute, second;
Thread thread = null;
public MyTime() {
hour= time.get(Calendar.HOUR_OF_DAY);
minute = time.get(Calendar.MINUTE);
second = time.get(Calendar.SECOND);
if(thread == null) {
thread = new Thread(this);
thread.start();
public void run() {
Thread t = Thread.currentThread();
while(thread == t) {
thread.sleep(1000);
second++;
if(second > 59)
minute++;
if(minute>59)
hour++;
formatTime();
public void formatTime() {
second = (second > 59? 0 : second);
minute = (minute > 59? 0 : minute);
hour = (hour > 23? 0 : hour);
System.out.println(hour+":"+minute+":"+second);
public static void main(String[] args) {
new MyTime();
I know this looks like gibberish but it should work. If not, try to fix the problem, i have written from memory really but i guarantee you, this gets the time then every second, simply adds one to the second and then formats time. You can also access the day, month and year then format them using the above code. I don't like giving code since you should really do these things yourself but it is 2:04am, i have nothing better to do and i am not tired so i did you a favour - i have become what i always did not want to, someone ho stays upall night writing code.

How to get system status and user status ?

how to get system status and user status for the given production order?
In which PP table we can
find these?
Thanks&Regards
Satish

Hi Ram,
Use the FM "STATUS_READ" to read both the system and user statuses for an Order.
Alternatively, the following tables store the user and system status info:
JSTO- Status object information
JEST- Individual Object Status
Hope this helps.
Let me know if u need further information.
Regards,
Sonal

[ASK] How to get system date and substring / concate in data manager dynami

Hello guys.
I want to run package DM with the input have default value.
The selection is look like this :
Dimension : CATEGORY
Source : PLAN_2011
Destination : FORECAST_2011
Dimension : TIME
Source : 2011.JAN,2011.FEB,2011.MAR,2011.APR,2011.MAY,2011.JUN,2011.JUL,2011.AUG,2011.SEP,2011.OCT,2011.NOV,2011.DEC
Destination : <same>
How to get system date year and do the substring / concate ?
So dimension category source will be PLAN_<YYYY>, destination = FORECAST_<YYYY>
Dimension source = <YYYY>.JAN,<YYYY>.FEB,<YYYY>.MAR,<YYYY>.APR,<YYYY>.MAY,<YYYY>.JUN,<YYYY>.JUL,<YYYY>.AUG,<YYYY>.SEP,<YYYY>.OCT,<YYYY>.NOV,<YYYY>.DEC
Depend on year system date.
Thank you.

Stuart,How are you storing OnSaleDate. If you are using OnSaleDate as an attribute dimension then you can write a Custom Defined Function to either:1- query your system for the current date and return the number of seconds that have elapsed since 1/1/1970. This is by definition the begining of the Epoch and how Essbase treats Attribute Dimensions of the Date type.public static long getDateInSeconds() { Calendar cal = Calendar.getInstance(); return cal.getTime().getTime()/1000;}2- Write a Custom Defined Function that will accept the OnSaleDate and return the number of days sincepublic static double daysSince(double myDate) { return (getDateInSeconds()-myDate )/86400;}

How to get instrument and plug in files to logic8?

How to get instrument and plug in files to logic8?
I lost mine in a hard drive crash.
I cant use my DVD jam pack
This is my spec
Modellnamn:          iMac
Modellidentifierare:          iMac8,1
Processornamn:          Intel Core 2 Duo
Processorhastighet:          2,4 GHz
Antal processorer:          1
Totalt antal kärnor:          2
L2-cache:          6 MB
Minne:          3 GB
Busshastighet:          1,07 GHz
Boot ROM-version:          IM81.00C1.B00
SMC-version (system):          1.29f1
iMac, OS X Mountain Lion (10.8.2)

I think you want to get the latitude and longitude information of client accessing the web application. In the web application you cannot directly get the client location information as the nature of the web application is different from windows applications.
I advise you to develop a Silverlight component and in that Silverlight component use geolocation classes to get client location. Please refer this article for getting data in Silverlight http://www.c-sharpcorner.com/UploadFile/82b980/getting-geo-location-of-user-in-silverlight/
And once you get the location information you can send that data back to ASP.net webpage or call any javascript method as shown here http://ovaismehboob.wordpress.com/2013/06/22/bridging-data-between-asp-net-and-silverlight/
Hope this helps!
Ovais Mehboob Ahmed Khan http://ovaismehboob.wordpress.com

How to get system idle time

Hello Sir,
I am Udhaya. I don't know how to capture system idle time using java. Please any one help me how to get system idle time. Any class is available in java to get idle time?
Thank in advance
Udhaya

jwenting wrote:
DrLaszloJamf wrote:
jwenting wrote:
the moment you ask the system for its idle time that idle time becomes 0, so just returning a constant value of 0 would always yield the correct answer.But when you don't call this constant method the value it would return is wrong. This is the sort of thing that keeps me up at night.Except of course that when you don't call it it doesn't return it and therefore still behaves properly.
Or were you thinking of philosphical problems like "what does a method do when it's not called?"?Actually I was trying to see if I could get the OP to say boo to a goose.

How to get system Environment variable?

How to get system Environment variable without using jni?
just like "JAVA_HOME" or "PATH"...
Any reply is help to me!! :-)

Thx for your reply...
I get it!!!
Read environment variables from an application
Start the JVM with the "-D" switch to pass properties to the application and read them with the System.getProperty() method. SET myvar=Hello world
SET myothervar=nothing
java -Dmyvar="%myvar%" -Dmyothervar="%myothervar%" myClass
then in myClass String myvar = System.getProperty("myvar");
String myothervar = System.getProperty("myothervar");
This is useful when using a JAVA program as a CGI.
(DOS bat file acting as a CGI) java -DREQUEST_METHOD="%REQUEST_METHOD%"
-DQUERY_STRING="%QUERY_STRING%"
javaCGI
If you don't know in advance, the name of the variable to be passed to the JVM, then there is no 100% Java way to retrieve them.
NOTE: JDK1.5 provides a way to achieve this, see this HowTo.
One approach (not the easiest one), is to use a JNI call to fetch the variables, see this HowTo.
A more low-tech way, is to launch the appropriate call to the operating system and capture the output. The following snippet puts all environment variables in a Properties class and display the value the TEMP variable. import java.io.*;
import java.util.*;
public class ReadEnv {
public static Properties getEnvVars() throws Throwable {
Process p = null;
Properties envVars = new Properties();
Runtime r = Runtime.getRuntime();
String OS = System.getProperty("os.name").toLowerCase();
// System.out.println(OS);
if (OS.indexOf("windows 9") > -1) {
p = r.exec( "command.com /c set" );
else if ( (OS.indexOf("nt") > -1)
|| (OS.indexOf("windows 2000") > -1 )
|| (OS.indexOf("windows xp") > -1) ) {
// thanks to JuanFran for the xp fix!
p = r.exec( "cmd.exe /c set" );
else {
// our last hope, we assume Unix (thanks to H. Ware for the fix)
p = r.exec( "env" );
BufferedReader br = new BufferedReader
( new InputStreamReader( p.getInputStream() ) );
String line;
while( (line = br.readLine()) != null ) {
int idx = line.indexOf( '=' );
String key = line.substring( 0, idx );
String value = line.substring( idx+1 );
envVars.setProperty( key, value );
// System.out.println( key + " = " + value );
return envVars;
public static void main(String args[]) {
try {
Properties p = ReadEnv.getEnvVars();
System.out.println("the current value of TEMP is : " +
p.getProperty("TEMP"));
catch (Throwable e) {
e.printStackTrace();
Thanks to W.Rijnders for the W2K fix.
An update from Van Ly :
I found that, on Windows 2003 server, the property value for "os.name" is actually "windows 2003." So either that has to be added to the bunch of tests or just relax the comparison strings a bit: else if ( (OS.indexOf("nt") > -1)
|| (OS.indexOf("windows 2000") > -1 )
|| (OS.indexOf("windows 2003") > -1 ) // works but is quite specific to 2003
|| (OS.indexOf("windows xp") > -1) ) {
else if ( (OS.indexOf("nt") > -1)
|| (OS.indexOf("windows 20") > -1 ) // probably is better since no other OS would return "windows" anyway
|| (OS.indexOf("windows xp") > -1) ) {
I started with "windows 200" but thought "what the hell" and made it "windows 20" to lengthen its longivity. You could push it further and use "windows 2," I suppose. The only thing to watch out for is to not overlap with "windows 9."
On Windows, pre-JDK 1.2 JVM has trouble reading the Output stream directly from the SET command, it never returns. Here 2 ways to bypass this behaviour.
First, instead of calling directly the SET command, we use a BAT file, after the SET command we print a known string. Then, in Java, when we read this known string, we exit from loop. [env.bat]
@set
@echo **end
[java]
if (OS.indexOf("windows") > -1) {
p = r.exec( "env.bat" );
while( (line = br.readLine()) != null ) {
if (line.indexOf("**end")>-1) break;
int idx = line.indexOf( '=' );
String key = line.substring( 0, idx );
String value = line.substring( idx+1 );
hash.put( key, value );
System.out.println( key + " = " + value );
The other solution is to send the result of the SET command to file and then read the file from Java. ...
if (OS.indexOf("windows 9") > -1) {
p = r.exec( "command.com /c set > envvar.txt" );
else if ( (OS.indexOf("nt") > -1)
|| (OS.indexOf("windows 2000") > -1
|| (OS.indexOf("windows xp") > -1) ) {
// thanks to JuanFran for the xp fix!
p = r.exec( "cmd.exe /c set > envvar.txt" );
// then read back the file
Properties p = new Properties();
p.load(new FileInputStream("envvar.txt"));
Thanks to JP Daviau
// UNIX
public Properties getEnvironment() throws java.io.IOException {
Properties env = new Properties();
env.load(Runtime.getRuntime().exec("env").getInputStream());
return env;
Properties env = getEnvironment();
String myEnvVar = env.get("MYENV_VAR");
To read only one variable : // NT version , adaptation for other OS is left as an exercise...
Process p = Runtime.getRuntime().exec("cmd.exe /c echo %MYVAR%");
BufferedReader br = new BufferedReader
( new InputStreamReader( p.getInputStream() ) );
String myvar = br.readLine();
System.out.println(myvar);
Java's System properties contains some useful informations about the environment, for example, the TEMP and PATH environment variables (on Windows). public class ShowSome {
public static void main(String args[]){
System.out.println("TEMP : " + System.getProperty("java.io.tmpdir"));
System.out.println("PATH : " + System.getProperty("java.library.path"));
System.out.println("CLASSPATH : " + System.getProperty("java.class.path"));
System.out.println("SYSTEM DIR : " +
System.getProperty("user.home")); // ex. c:\windows on Win9x system
System.out.println("CURRENT DIR: " + System.getProperty("user.dir"));
Here some tips from H. Ware about the PATH on different OS.
PATH is not quite the same as library path. In unixes, they are completely different---the libraries typically have their own directories. System.out.println("the current value of PATH is: {" +
p.getProperty("PATH")+"}");
System.out.println("LIBPATH: {" +
System.getProperty("java.library.path")+"}");
gives the current value of PATH is:
{/home/hware/bin:/usr/local/bin:/usr/xpg4/bin:/opt/SUNWspro/bin:/usr/ccs/bin:
/usr/ucb:/bin:/usr/bin:/home/hware/linux-bin:/usr/openwin/bin/:/usr/games/:
/usr/local/games:/usr/ccs/lib/:/usr/new:/usr/sbin/:/sbin/:/usr/hosts/:
/usr/openwin/lib:/usr/X11/bin:/usr/bin/X11/:/usr/local/bin/X11:
/usr/bin/pbmplus:/usr/etc/:/usr/dt/bin/:/usr/lib:/usr/lib/lp/postscript:
/usr/lib/nis:/usr/share/bin:/usr/share/bin/X11:
/home/hware/work/cdk/main/cdk/../bin:/home/hware/work/cdk/main/cdk/bin:.}
LIBPATH:
{/usr/lib/j2re1.3/lib/i386:/usr/lib/j2re1.3/lib/i386/native_threads:
/usr/lib/j2re1.3/lib/i386/client:/usr/lib/j2sdk1.3/lib/i386:/usr/lib:/lib}
on my linux workstation. (java added all those execpt /lib and /usr/lib). But these two lines aren't the same on window either:
This system is windows nt the current value of PATH is:
{d:\OrbixWeb3.2\bin;D:\jdk1.3\bin;c:\depot\cdk\main\cdk\bin;c:\depot\
cdk\main\cdk\..\bin;d:\OrbixWeb3.2\bin;D:\Program
Files\IBM\GSK\lib;H:\pvcs65\VM\win32\bin;c:\cygnus
\cygwin-b20\H-i586-cygwin32\bin;d:\cfn\bin;D:\orant\bin;C:\WINNT\system32;C:\WINNT;
C:\Program Files\Dell\OpenManage\Resolution Assistant\Common\bin;
d:\Program Files\Symantec\pcAnywhere;
C:\Program Files\Executive Software\DiskeeperServer\;C:\Program Files\Perforce}
LIBPATH:
{D:\jdk1.3\bin;.;C:\WINNT\System32;C:\WINNT;d:\OrbixWeb3.2\bin;D:\jdk1.3\bin;
c:\depot\cdk\main\cdk\bin;c:\depot\cdk\main\cdk\..\bin;
d:\OrbixWeb3.2\bin;D:\Program Files\IBM\GSK\lib;
H:\pvcs65\VM\win32\bin;c:\cygnus\cygwin-b20\H-i586-cygwin32\bin;d:\cfn\bin;
D:\orant\bin;C:\WINNT\system32;
C:\WINNT;C:\Program Files\Dell\OpenManage\ResolutionAssistant\Common\bin;
d:\Program Files\Symantec\pcAnywhere;
C:\Program Files\Executive Software\DiskeeperServer\;C:\Program Files\Perforce}

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

How to get tools and other bars back in view after deleting show-bar?

How to get tools and other bars back in view after deleting show-bar?

Hello Jouko.
You can go into View > Toolbars and select the ones you want to see. If you can't see the menu bar you can simply tab ALT on your keyboard (I think F10 works too) to show it.

How to get system temp dir. path on the fly ,system may be XP or Linux ??

How to get system temp dir. path on the fly ,system may be XP or Linux ??
please suggest solution

The default temporary-file directory can be retrieved
using:
System.getProperty("java.io.tmpdir")
Thanks a lot for u r reply this one works !!!!

How Adobe gets DATE and its format?

Hello,
I am getting current (todays) date by using below JS in some flds, and by using below FormCalc for some flds into my_form,
JS:
var currentTime = new Date()
Form Calc:
$.rawValue = num2date(date(), DateFmt(MM/DD/YYYY))
But, i dont have much idea that how adobe is getting this date? For my company this is the very first form, hence they are asking me how adobe gets date and its format whether,
1) From local IP/Interner provider address's date, format?
2) or user PC/laptop's LOCAL settings date, format? if so, for example, if Germany user (Laptop settings) has a DD.MM.YYYY configured, if this user comes to US on a busines trip and if that user opens the form, then how the date looks like for this user? as per user laptop settings DD.MM.YYYY or local internat provider date format MM//DD//YYYY?
Thank you

Hi,
the date() function returns the number of days since 01.01.1900 for the local date of the current system (related to the system clock of the OS).
If you travel from Germany to the US but don't update your date/time settings, then it returns the same date in the US as in Germany.
You can check the behavior by changing your local date/time setting or the timezones.

Stuck in restart - how to get out and reboot

I have a MacBook that is stuck in restart mode. Any advice how to get out and restart? Thanks

Welcome to Apple Support Communities. We're all users here.
Try powering off and restarting in 'Safe Mode': The instant you hear the startup tone, hold down the shift key and keep it held down as explained in this Apple support note:
http://support.apple.com/kb/ht1455
A Safe Mode restart does take much longer than a normal start, because the computer checks the hard drive and ignores cached kernel extensions that normally speed boot-up.
http://support.apple.com/kb/TS1884
Note that not all devices and services, notably WiFi, may be available after a Safe Mode start.
This is not necessarily an indication of a hardware error.
After your computer starts in Safe Mode, you should shut down, and attempt to restart normally.

How to get system and boot on one volume - currently on 2 volumes

Similar Messages

Maybe you are looking for