How to get tem level text of PO???

Dear all,
I want to get the data for Item level text of PO. But not able with the function read_ text as in header level text.
So please tell me how I can get for tem level text of PO.
Thanks in advance.
Sachin Gautam

Hi Sachin,
Follow the steps.
1. Go to the text tab for the item.
2. Choose the Item text.
3. Double click on the text editor.
4. GOTO -> Header.
Get the text name (PO Number+item number eg: 100000000200010 for item number 10).
Language
Text ID and Text Object
Put these values in READ_TEXT.
Hope it helps.....
Lokesh
Pls. reward appropriate points

Similar Messages

How to get Grand Total Text in ALV GRID

Hi Folks,
I am able to get the SUBTOTAL TEXT .....But i need...
How to get Grand Total Text in ALV GRID Display...
Can any one give a Solution for this...

Hi Surendar,
Check out this code.. this is showing Total Text in Toal line in the very first column.
REPORT zsales_ord_det_1                        .
TABLES: ztable_10.
TYPE-POOLS: slis.
DATA: BEGIN OF it OCCURS 0,
srno(6) type c,
name LIKE ztable_10-name,
age LIKE ztable_10-age,
END OF it.
DATA : BEGIN OF it_temp OCCURS 0,
name LIKE ztable_10-name,
age LIKE ztable_10-age,
END OF it_temp.
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
      wa_fieldcat TYPE slis_fieldcat_alv.
DATA: v_repid LIKE sy-repid,
       i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
       gs_layout TYPE slis_layout_alv,
       gd_layout TYPE slis_layout_alv,
       i_sort TYPE STANDARD TABLE OF slis_sortinfo_alv,
       wa_sort TYPE slis_sortinfo_alv.
START-OF-SELECTION.
v_repid = sy-repid.
SELECT * FROM ztable_10 INTO TABLE it_temp.
LOOP AT it_temp .
    it-srno = 'Total'.
    it-name = it_temp-name.
    it-age = it_temp-age.
    APPEND it.
ENDLOOP.
END-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
   EXPORTING
     i_program_name               = v_repid
     i_internal_tabname           = 'IT'
I_STRUCTURE_NAME             =
I_CLIENT_NEVER_DISPLAY       = 'X'
     i_inclname                   = v_repid
I_BYPASSING_BUFFER           =
I_BUFFER_ACTIVE              =
    CHANGING
      ct_fieldcat                  = i_fieldcat[]
   EXCEPTIONS
     inconsistent_interface       = 1
     program_error                = 2
     OTHERS                       = 3
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
wa_fieldcat-row_pos = 1.
wa_fieldcat-col_pos = 1.
wa_fieldcat-fieldname = 'SRNO'.
wa_fieldcat-tabname = it.
append wa_fieldcat to i_fieldcat.
LOOP AT i_fieldcat INTO wa_fieldcat.
    IF wa_fieldcat-fieldname = 'AGE'.
      wa_fieldcat-do_sum = 'X'.
      MODIFY i_fieldcat FROM wa_fieldcat.
    ENDIF.
   IF wa_fieldcat-fieldname = 'SRNO'.
     Hide this field so that it can display it's content i.e.
        Total text in Subtotal level
    wa_fieldcat-tech = 'X'.
      wa_fieldcat-no_out = 'X'.
      MODIFY i_fieldcat FROM wa_fieldcat TRANSPORTING tech no_out.
   ENDIF.
ENDLOOP.
wa_sort-spos = 1.
wa_sort-fieldname = 'SRNO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort.
gd_layout-no_totalline = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                       = ' '
     i_callback_program                        = v_repid
I_CALLBACK_PF_STATUS_SET     = ' '
i_callback_user_command                = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE         = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST    = ' '
I_STRUCTURE_NAME                       =
I_BACKGROUND_ID                        = ' '
I_GRID_TITLE                                  =
I_GRID_SETTINGS                          =
     is_layout                                      = gd_layout
     it_fieldcat                                      = i_fieldcat[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
     it_sort                           = i_sort
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
I_HTML_HEIGHT_TOP                 =
I_HTML_HEIGHT_END                 =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = it
   EXCEPTIONS
     program_error                     = 1
     OTHERS                            = 2
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Regards,
Seema

How to get the short text in tcode "msc3n" -- Basic data 2 -- short text.

I have to display the short text in my report output.
How to get the short text in tcode "msc3n" ( msc3n --> Basic data 2 --> short text.)?
Is there any function module availble to get this short text or is this stored in any data base table ?
Please help me. Your help will be highly appreaciated.
THANKS.

Hi,
Use FM 'READ_TEXT' to get this values.
Say for exampele my material is 1900001 and batch is 0000000517.
Then my parameters to the FM will be as follows:-
Text Name       000000000001900001    0000000517
Language        EN
Text ID          VERM
Text Object     CHARGE
This information you can get as follows.
Open the short text window in the text editor.
Here you can enter the long text.
In the editor Go to Header and you will find the details.
Please note that the text name will comprise of
Material
Batch
Plant
Stor. Location
if all the details are given.
I hope this helps you.
Regards,
Ankur Parab

How to get the bold texts in JTextPane?

How to get the bold texts in JTextPane?

I believe you need to look at the Elements of the Document. Use the Document.getDefaultRootElement() method to get the first root Element. From there you can iterate through all the Elements. You should then be able to check the attributes of the element to see if it contains the Bold attribute using something like:
AttributeSet attributes = element.getAttributes();
if ( attributes.containsAttribute(StyleConstants.Bold, Boolean.TRUE)
// do processing here

HOW CAN GET BACK MY TEXT MSG & PICTURES DELETED

HOW CAN GET BACK MY TEXT MSG & PICTURES DELETED I REALY NEED

lilsimms1228 wrote:
How can I get an overview of old text messages and phone call [personal detail removed]
If you are the account owner, you can access the last year of calls records and the last three months of message summary (date, time, number texted, there is no where to see the text context) through your online account. Click on the HOME Tab once logged in and choose PRINT BILLS and then click on the pull down menu to choose any invoice for the last twelve months to view.

How to get PO header text in PO list

Hi All,
Please let me know how to get PO header text in PO list.
Thanks,
Ama

Check this link for answer
PO Header Text

How to get the Arabic text to speech on N8 ?

How to get the Arabic text to speech on N8 ?

Unfortunately it is not currently an available option:http://www.nokia.com/global/support/text-to-speech-s60-32-downloads/
Happy to have helped forum with a Support Ratio = 42.5

How do I get Item Level text from PO ME21N Prior To Saving The PO?

I saw this asked a few times but no solution so I will ask again.
Imagine that you are creating a PO in ME21N. You have some Header Level Text and then imagine you have 2 items in this PO. Each of these two items has Item Level Text.
Once a PO is saved, I know how to use Read_Text to get the texts for the header and items. You simply pass which text you want (ex. F01) the PO number and the language and it returns the texts for the header. For item level you combine PO number and Item number you want in the Name parameter of Read Text (example 112233445500010) then tell it which text you want (ex F01) and that is how it knows which item you want the text for.
However: When the user is first creating the PO, they want to see how it will look in printing but prior to actually saving the PO. They dont want to save the PO until they know how it will print with Print Preview.
I was very surprised that the print preview actually worked for the Header Texts prior to saving. I debugged Read_Text and see that when it sees no PO number passed, it simply supplies the text (F01) and the language and pulls it out of an FM READ_CATALOG which I am assuming is memory. In theory, you will only have one F01 text at the header level and it makes sense to me that it is able to retrieve that.
BUT: My Item Level Texts are not returning anything. It makes sense to me as well because you cannot simply tell it give me the F01 texts you see because if you have multiple items, you will have multiple F01 texts, one for each item number if you put text to each item.
How can I get the item level texts out before saving the PO? Since the PO is not saved yet, there is no PO number and nothing is stored in STXH and STXL. Where are the texts stored and how can I retrieve them? I tried passing just the item number but as expected it still returned nothing.
Any ideas?

Ok I figured it out. I will add this for anyone else that may have this issue.
The short version is that just like header level texts, item level texts that have not yet been officially saved to the PO are stored in a catalog. If you were to debug READ_TEXT you will see that it will look in the catalog to see if there is an entry there for the corresponding texts (ex F01, F02 etc).
For header texts, you simply pass the language and which text you want without the PO number and it will return header texts.
Item level however you have to specify which line item you want plus which text and then the language.
During debugging if you debug Read_text and go to the FM READ_CATALOG you will see the following:
READ TABLE CATALOG WITH KEY CATALOG_KEY.
Load the table Catalog into the debugger and see how it stores them.
In one solution I read on this forum it said to use 10 zeros and then your item number.
Mine was stored with 10 spaces, not zeros. Loaded 10 spaces plus the item number and it returned my text with READ_TEXT.
Hope this helps someone else one day!!

How to get Material long text / Sales Text

Hi,
when I have created a service order I have enter Long text in Tab Item Details , i.e in sales Text I have entered some text , So can any one tell me how to get this text as I have to show this text in invoice printing
Thanks
Bobby

600101202274700000001
For a Particular Text name Of Item Level operations
1st 3 character denotes client id in this case 600 +
2nd 10 character denotes AFKO-AUFPL with respect to the production order in this case
1012022747 +
last 8 character denotes the operation line item numebr

How to get column header text in IWDTable

Hi
Just want to know how to get column header name in IWDTable.
I know that you can get it with
IWDAbstractTableColumn[] groupedColumns = table.getGroupedColumns();
for (int i = 0; i < groupedColumns.length; i++) {
     IWDAbstractTableColumn column = groupedColumns<i>;
     column.getHeader().getText();
But what if text isnt set on header level but its rendered from cellEditor model binding (im not sure if its like that).

Finally after your suggestion i did it with this code
String header = column.getHeader().getText();
                   if ((header == null || header.length() == 0) && column instanceof IWDTableColumn){
                        IWDTableCellEditor tableCellEditor = ((IWDTableColumn) column).getTableCellEditor();
                        if (tableCellEditor instanceof IWDTextView){
                             String bindingPath = ((IWDTextView)tableCellEditor).bindingOfText();
                              StringTokenizer tokenizer = new StringTokenizer(bindingPath,".");
                              String token = "";
                              IWDNodeInfo nodeInfo = context.getNodeInfo();
                              while (tokenizer.hasMoreTokens()){
                                   token = tokenizer.nextToken();
                                   if (tokenizer.hasMoreTokens()){
                                        nodeInfo = nodeInfo.getChild(token);
                              IWDAttributeInfo attribute = nodeInfo.getAttribute(token);
                              ISimpleType simpleType = attribute.getSimpleType();
                              simpleType.getDescription();
                             header = simpleType.getDescription();

How to get key and text value of field "TNDRST" in VTTK from R/3 into BI

There is one field call "TNDRST(Tender Status)" in SAP table VTTK in R/3. We can find key value, but we are unable to find text for this field in VTTK. However we can see text value if we double click domain:TNDRST and go to value range.
Questions, how to get key value and text of TNDRST together in BI. Do we need to create a master data source for TNDRST text information in R/3 and extracting into BI, if yes, how to? Are there any easy way to do it??
Thanks,
Sudree

Hi Sudree,
You need to create a generic Text Datasource to extract this information into BI System.
1. Create a generic DS based on Table: DD07T
2. The fields should be put in the extract structure.
          DOMNAME (Make this as Selection in the DS ) -
Filter the Domain Name
          DOMVALUE_L -
Key Value of Tender Status
          DDTEXT -
Text / Description
          DDLANGUAGE -
Language
3. DD07T is the table with all the Domain names & their values, so in the Infopackage enter the Selection Value for DOMNAME as 'TNDRST' and then run it.
Or you can create a view out of this table based on DOMNAME filter as 'TNDRST'.
Regards,
Chathia.

How to get only partial text of a paragraph into the table of content?

Hi guys,
currently I'm working on a manuscript based on the publication manual of the American Psychological Association.
Unfortunately, there is some sort of heading that's placed right in front of further text. Here an example:
+This is my heading.+ Now ordinary text formatted differently should follow.
Does anyone here know, how to get the text of the heading (but not the following text) into the table of content? For as far as I know I can't format the heading as a different paragraph than the following text.
By the way, I use pages'08.
Thanks for your help

Hi Dennis,
thanks for your suggestion, unfortunately I already tried that and it didn't work. I have created several unique styles. Problem is, I need two diferent styles in *one paragraph* - one style for the "heading", which is consistent to the APA manual not an own paragraph (sorry, not my idea...), and another style for the following text. As my example above shows, the heading is followed by usual text and I may not press return after the heading and switch to a new paragraph..
It has to look exactly like this:
+heading in italics.+ Now heading is followed by usual text without changing the paragraph or starting a new line. Blurb blurb blurb whatsoever blurb blurb. The text goes on an on and an on you see.
I can't format the heading differently than the text (because if I try, the whole paragraph is formatted this way) and so I can't add just the heading to the TOC. Do you see what my problem is? Got any other suggestion?

How to get the standard texts available in a smartforms

Hi Experts,
How can we find out the standard texts that are exist in a particular smartform . is there any table/function module available to get those standard texts? I am finding the table STXFTXT, from that I am getting only textline. But I need the standard text names that are used in a smartform.
Thanks & Regards,
Suresh

hi,
1,Use SO10 Tcode to write standard text in Smartform.
2.For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
3.
1. take function module name of the smartform.
2. goto se37 and type that fm name.
3. goto attributes tab
4. double click on either program or include .
5. There u can find all the subroutines used inside smartform.
6. search for "perform %move using %textkey-name".
4.Standard Texts are created in SO10 Tcode and stored in STXH table with OBject ,ID and NAME parameters. We can use Read_Text FM to read the text.
check the tables STXH & STXL.
5.
How to CAll Standard Text in Smart Forms
In SFs you can insert the standard tests using the TEXT node. Create a TEXT NODE. Then in the GENERAL ATTRIBUTES of this TEXT node select INCLUDE TEXT in the TYPE option. Then you have to enter the text name, object , ID and language in the provided fields. Then if you dont want any error if there is no text in the corresponding text then CHECK the check box "No errors if no text available.

How to get the Underlined text in JTextPane

I have a JtextPane with text say "i _like java_ it is a _good language_".
in the above text i have made "like java" and "good language" underlined. And i have added a mouse listener to this JTextpane. the whole idea is to create a hyperlink so that when the user clicks anywhere on "like java" then i want to get the complete text("like java") where i clicked and using this text i want to do some operation. How can i get the underlined text?
thanks.

it was the same i question what i had posted. i didn't get reply there so i posted the same question in a new topic.

How to get sales area text data ( line1) from XD02

hi sap gurus,
how to get table name for sales area text xd02 (like marking, remarks , tag ) or we have to use function module to fetch it in the report.
thanks ,
Amit Ranjan .

Table names for all texts are STXH,STXL but from table u cannot fetch them as in the table these texts are stored in RAW format. To fetch this text in human readable format use the FM READ_TEXT. To use this Fm u have to pass text name, text id and object name..u can get all data by double clicking the editor for each text..it will goto the sapscript editor(line editor) then from menu path Goto->Header..u will get all the info....
Regards,
JOy.

How to get tem level text of PO???

Similar Messages

Maybe you are looking for