How to get the 0 in front of a number

I have a table column with number data type. How to get the column including the 0 in the front.
For example: 066666 i want get 66666, not 066666.
Thanks.

Hi,
Post your query and some data. Seriously. There are a number of different possible explanations, mostly invlolving TO_CHAR or COLUMN. I don't want to write them all, and you don't want to read them all.

Similar Messages

How to get the footage's current frame number in expression?

There are 2 layers.One is text layer,one is sequence layer.
Footage has begun from the 20th frame.
Therefore, the number of composition's current frame number and footage's frame number has shifted.
I want to show footage's frame number in text layer . not composition's frame number.
How to get the footage's current frame number in expression?
Tatsuya

>Footage has begun from the 20th frame.
Do you mean that the footage layer has been trimmed (so that the start of the footage lines up with the start of the comp, but the first 19 frames are not visible), or moved to the left (so that frame 20 lines up with the comp's frame 0), or that the sequence actually begins with the 20th frame (at frame 0 of the comp), or something else?
Are the frame rates of the comp and the footage the same?
Dan

HT4061 how go get the missed iphon's imei number

i lose my i phone i dont know iemi number how to get the mised iphones imei number

Read here for the various ways:
http://support.apple.com/kb/HT4061
Your carrier also has a record of your phone's IMEI number.

How to get the order type from notification number

Hi,
i have the notification number,
fromthis number how can i get the Maintenance Order type.
what is the table name to get the order type.
Please tell me.

Hi,
First you read table QMEL with notification number and get AUFNR. Then go to AUFK and get AUART (order type).
Some thing like,
SELECT SINGLE aufnr INTO lv_aufnr FROM qmel WHERE qmnum EQ <your notification>.
IF sy-subrc EQ 0 AND NOT lv_aufnr IS INITIAL.
SELECT SINGLE auart INTO lv_auart FROM aufk WHERE aufnr EQ lv_aufnr.
ENDIF.
Hope this helps..
Sri

How to get the Host name and port number

Hi all,
I am working in xRPM. I need to get the server name, host name & port number for the portal and i need to diaplay as a link in the Workflow step. I cant give the portal link as static, as it will vary depends on the DEV, QUAL, PROD. Is there any FM or class is available, so i can get the server name, port no. for my purpose?.
Regards,
Vinoth

Hi Kanagaraja,
My client has configured the portal and backend in different stack. So when i execute the FM you provided and with class: CL_HTTP_SERVER, CL_WD_UTILITIES, i am getting only the backend host name and port no. not the portal's info. So please help is there any way we can get the portal's info.
Thanks for your reply.
-Vinoth

How to get the redemption code or serial number to activate CC subscription?

Hello, my Creative Cloud free-trial has expired and now when I open a product it is asking me for a serial number to activate it. So, the system is not recognizing my Creative Cloud subscription! Then it asks me to redeem a redemption code with a redemption code, but I do not have a redemption code. How can we solve this so I can continue using my products? Thanks!

You say your FREE trial has expired, and then you say you have a subscription... which is it? Do you have a paid subscription?
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

How to Get the Debugger Screen in WEB Front end of SRM

Hi Gurus,
I have couple of questions for SRM.
1. How to Get the Debugger Screen in WEB Front end of SRM so i can debug the application which is running in EBP system??
2. How to set the flag for external debugging (HTTP)??
3. Using SICF how to set the ITS services ( Like BBPSC01 )for internal ITS so as soon as i place the order it should stop at the break point which i have set in the application.
Thanks.
Regards,
Manoj Tiwari

Setting up Debugging for Integrated ITS
Tcode SICF.
Select service (e.g. default_hostàbcàguiàsapàitsàbbpsc01).
Change service settings and insert parameter ~GENERATEDYNDPRO=1.
Find program to debug. E.g. SE93. Enter bbpsc01 à Display and get Program field (SAPLBBP_SC_UI_ITS)
Execute SE38 and enter program name.
Turn HTTP Debugging ON. UtilitiesàSettingsàDebugging. Click Actv and username.
Add HTTP Breakpoint. Display source code and select Utilitiesàbreakpointsàset.
On External Debugging select HTTP Breakpoint.
Remember to remove breakpoints, deactivate debugging and remove parameter GENERATEDYNPRO.
Can run program RSBREAKPOINTS to find which programs you have breakpoints set in.
Have fun with EBP
If you have any more questions i would be happy to help you. Send me mail on [email protected]

How we get the component at front or back in a Jpanel

How we get the component at front or back in a Jpanel. I want to manage the Z-axis position of the components in the Jpanel.

[url http://java.sun.com/docs/books/tutorial/uiswing/components/layeredpane.html]How to Use Layered Panes

How to get the order for these decorations?

hello,
I want to programatically resize all the controls, indicators and decorations on the front panel.
I am getting the references of all the controls and indicators and able to resize them, as each n every control and indicator has a tabbing order set to it.
I am also getting the references of all the decoration used on the front panel but not able to get the order.
how to get the order for these decorations?

The order of the decorations is the same as the back to front order. So you
can change it by bringing decorations to front, or sending them to the back.
It has been suggested many times that decorations should have labels as well
as controls, but at the moment there is no way to tell which reference
belongs to which decoration (besides position and order).
Regards,
Wiebe.

How to get the line in the template (smartform) with out using under score

Hi,
     How to get the line in the template (smartform) with out using under score,
     and how to print the box (line the check box - small squre box (which is used ot mark the tick by the user in front of the item).
     Please provide the valueble answer as early as possible.
Thanks,
Ravi

Hi Ravi,
Line -
Use a SMATSTYLE for this purpose.in the smartstyle create a paragraph or character with underline atribute.Then call the smartstyle in the text.
Search SDN with Key <b>UNDERSCORE</b>.. will get few more posts on the same.
For Checkbox - refer link
Re: Quick Question on Smartforms
Re: putting tick mark into check box in smartform
Reward points if this Helps.
Manish
Message was edited by:
        Manish Kumar

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

How to get the table of value field? and can we expand the technical limits

Dear
I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
We have a note for R.4.x Please see below:
OSS note 160892
You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
David Sun
Regards!

how to extend the limit of value numbers? please see the original question.

I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.

How to get the value from a JavaScript and send the same to Java file?

Hi.
How to get the value from a JavaScript (this JS is called when an action invoked) and send the value from the JS to a Java file?
Thanks and regards,
Leslie V

Yes, I am trying with web application.
In the below code, a variable 'message' carries the needed info. I would like to send this 'message' variable with the 'request'.
How to send this 'message' with and to the 'request'?
Thanks for the help :-)
The actual JS code is:
function productdeselection()
var i=0;
var j=0;
var deselectedproduct = new Array(5);
var message = "Are you sure to delete Product ";
mvi=document.forms[0].MVI;
mei=document.forms[0].MEI;
lpi=document.forms[0].LPI;
if(null != mvi)
++i;
if(null != mei )
++i;
if(null != lpi)
++i;
if(null != mvi && mvi.checked)
deselectedproduct[++j]="MVI?";
if(null != mei && mei.checked)
deselectedproduct[++j]="GAP?";
if(null != lpi && lpi.checked)
deselectedproduct[++j]="LPI?";
if( 0!=j)
if(i!=j)
for (x=0; x<deselectedproduct.length; x++)
if(null != deselectedproduct[x])
message =message+ "-" +deselectedproduct[x];
alert(message);
else
//alert(" You cannot remove all products!");
return false;
return true;
}

How to get the value from databank

Hi,
How to get the value from databank? and how to set the same value to visual script object?
thanks,
ra

Hi,
You can use GetDatabankValue(HeaderName, Value) to get the value from databank and SetDataBankValue(HeaderName, Value) to set the value to databank.
You can refer to the API Reference to see list of associated functions and techniques we can use with related to Data Bank.
This is the for OFT but if you are using Open Script then you have direct access for getting the databank value but when it comes to setting a value you have to use File operation and write you own methods to do the set operation.
Thanks
Edited by: Openscript User 100 on Nov 13, 2009 7:01 AM

How to get the 0 in front of a number

Similar Messages

Maybe you are looking for