How to get the actual page cordinate a field

I have 2 content areas CA1, CA2. CA1 is filled with dynamic table..which will flow into multiple page..at the end of the table I want the signature ..The signature has to be upper half of the page..since contents of the table are dynamic..it could be that the content could fill 3/4 of last page..so in which case I have to page break and go to next page and printed on the positioned place.
The layout is flowed so it can overflow..I was planning to trigger a page break by putting a dummy field after the table and calculate the position of the dummy field with 0 width, 0 height which will be right after the table. If the position (dummyfield.y) has reach more than the upper half of the page.. it will trigger next page where the signature will be printed in the first half of the page in CA2...
But dummyfield.y always gives me a 0..because it is with respect to the previous container or something.. Any one with brighter ideas...
thanks

If you want to read cell level or row level data from excel you should use third party APIs. Apache POI provides such an API, you can use and read the excel documents. You can refer the POI API
<a href="http://poi.apache.org/hssf/quick-guide.html#ReadWriteWorkbook">here</a>.
And if you want to read the CSV file content do the following..
FileInputStream fis=(FileInputStream)wdContext.currentContextElement().get<attribute anme>().read(false);
byte in[] = new byte[512];
String csvData;
StringBuffer csvBuffer = new StringBuffer();
while(fis.read(in)>0)
csvData = new String(in);
csvBuffer.append(csvData);
//now write the logic to validate the csv data.
Regards
Abhilash

Similar Messages

How to get the Portal Page name from PLSQL?

Can anyone tell me how to get the portal page name from my dynamic page using plsql?
Apparently you can get the page id and work it out from there, but my calls to get the page id are not returning any values anyway.
My code for attempting to get the page id is below.
<oracle>
declare
v_pageid varchar2(30);
begin
v_pageid := wwpro_api_parameters.get_value('_pageid', '/pls/portal30');
htp.print('Page is '|| v_pageid);
end;
</oracle>
Ideally I'd actually just like to get the page name. Is there a straightforward way to do this?
Thanks in advance!
Sarah

Few clarifications -
1. wwpro_api_parameters cannot be used to get default portal
page parameters such as '_pageid', '_dad', '_schema' etc.,
2. Page information can be obtained through any components which
are available in that particular page. For example, in case of
dynamic page, we need to publish it as a portlet and add it to the
page. This process creates necessary packages in the DB, but we
will not have access to the portlet methods.
So, I would prefer creating a simple DB provider & portlet and access
page title from its show method as follows -
//Declare local variable l_page_id, l_page_title as varchar2
select page_id into l_page_id from wwpob_portlet_instance$ where
portlet_id = p_portlet_record.portlet_id and
provider_id = p_portlet_record.provider_id;
select name into l_page_title from wwpob_page$ where id=l_page_id;
More information on DB provider can be found at
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/articles/understanding.database.providers.html
Secondly, usage of wwpro_api_parameters.get_value method is
incorrect. This method expects two arguments -
<ul>
<li><b>p_name : </b> The name of the parameter to be returned.</li>
<li><b>p_reference_path : </b> An unique identifier for a portlet instance on the current page.</li>
</ul>
p_reference_path would be something like 99_SNOOP_PORTLET_76535103 and not some type of path as its name suggests.
The following code fragment fetches all parameters available
for a portlet.
Note : Copy this code into 'show' method of your portlet.
//Declare l_names, l_values as owa.vc_arr
* Retreive all of the names of parameters for this portlet
l_names := wwpro_api_parameters.get_names(
p_reference_path=>p_portlet_record.reference_path);
* Retreive all of the values of parameters for this portlet
l_values := wwpro_api_parameters.get_values(p_names=>l_names,
p_reference_path=>p_portlet_record.reference_path);
//Loop through these arrays to get parameter information
htp.p('<center><table BORDER COLS=2 WIDTH="90%" >');
htp.p('<tr ALIGN=LEFT VALIGN=TOP>');
htp.tableData(wwui_api_portlet.portlet_heading('Name',1));
htp.tableData(wwui_api_portlet.portlet_heading('Value',1));
htp.tableRowClose;
if l_names.count = 0 then
htp.p('<tr ALIGN=LEFT VALIGN=TOP>');
htp.p('<td COLSPAN="2">'
||wwui_api_portlet.portlet_text(
'No portlet parameters were passed on the URL.',1)
||'</td>');
htp.tableRowClose;
else
for i in 1..l_names.count loop
htp.p('<tr ALIGN=LEFT VALIGN=TOP>');
htp.tableData(l_names(i));
htp.tableData(l_values(i));
htp.tableRowClose;
end loop;
end if;
htp.p('</table></center>');
Hope it helps...
-aMJAD.

How to get the last page SAP Script form

How to get the last page SAP Script form.
I want to print a specific information in the last page of SAP form (Script). Please tell me how to get the last page number.
Regards

Hi
You have to check the system variable &NEXTPAGE&, if it's 0 it means you're in the last page.
From SAP Help:
This symbol is used to print the number of the following page. The output format is the same as with &PAGE& .
Note that on the last page of the output, in each window that is not of type MAIN, &NEXTPAGE& has the value 0.
/: IF &NEXTPAGE& = '0'
Last page
/: ENDIF
Max

How to get the actual data in ALV report

I am doing some upgradation work in that i am using Submit & And return and also i am using some function modules like LIST FROM MEMORY , LIST TO TXT wnd WRITE LIST , it gives output in normal list format , But i need to print in ALV report .
With the use of set table for 1st display i got the ALV report but not with actual data, (some junk value is showing) , So can any 1 suggest me how to get the actual data in ALV report, With the use of Any Function Module or with Coding,
with regards,

Hi Saravana
I am sure you must be getting the values in tables of table parameters from every FM.
consolidate the values from tables of all FMs in one table and built ALV for that table only.
I hope this way you can show the actual data in ALV.
thanks
Lalit

How to get the current page URL

HI All
I am working in oracle apps 4.0
I have one page called history in that i have one page item called Application url. My application id is 122 but its a copy of application 106
How to get the current page url for the page item.
Any steps should be help ful
Thanks & Regards
Srikkanth.M

I'm not 100% clear on what the requirement is from the description, however it does sound like you are making things unnecessarily complicated.
If you want permanent/ID-independent links then use application and page aliases.
so here we used to display the url like this: <tt>{noformat}http://81.131.254.171:8080/apex/f?p=122{noformat}</tt>
Do you mean that the URL is displayed like that? If so that doesn't seem particularly helpful. How is anyone supposed to know what it is?
There are many ways to provide links in APEX—including lists and nav bars.
Where the link is to another resource located on the same server (such as another page in the same app, or a different app in the workspace), relative addressing can be used, making it unecessary to include scheme, domain and port information in the URL. For example, if the page to be linked to has a page alias <tt>ABOUT</tt> in an application with alias <tt>UNITY</tt>, and the apps share an authentication scheme/cookie to permit shared sessions, then the link URL is simply
f?p=UNITY:ABOUT:&APP_SESSION.

How to get the total pages in ALV report?

Hi guys,
Since I used page breaks can somebody please help me on how to get the total pages in ALV report?sincerely please...thanks guys.

automatic display total page.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
r

How to get the Empty page in Webi report

Hi,
I have to insert the charts in the report but i don't have the space to insert the charts in same page so i need one more page how to get the blank page in report
thanks,

turn your report from Page Layout to Draft Mode. Than you will be able to insert chart in it.
You can view Web Intelligence reports in different modes depending on how you want to work with data and how you want the data to appear.
1. In Web Intelligence Interactive, select the report tab of the report you want to view.
2. Click the arrow next to the View button on the main toolbar above the report.
3. Select the viewing mode.
4. In the Java Report Panel or Web Intelligence Rich Client, use Switch Page/Quick Display on the Reporting toolbar to alternate between Page mode and Quick Display mode.
Edited by: srrachna on Apr 22, 2011 2:25 PM

How to get the jsp page name in jsp?

how to get the jsp page name in jsp? how the jsp get the jsp page name dynamic.
thanks in advance.

Try request.getServletPath()

How to get the actual font name from a font file?

Hi
I have only the font Path I have to get the font name from that path. Any idea how to get the actual font name?
Thanks,

I would ask you these questions:
Why do you need to do this? What are you ultimately trying to accomplish?
Are you really asking about the InDesign SDK?
Do you really need to get the "name" of a font from an arbitrary file? Or do you want information about a font installed on the system? If so, what OS?
Do you need to be able to handle any font format?
Which font "name" do you mean?
What language do you want the name in?
(1) It's not clear what you're trying to accomplish. A bit more information about your ultimate goal would be helpful.
(2) This question is not at all specific to the InDesign SDK. Are you really trying to do something in the context of an InDesign plug-in? If so, you probably want to look at IID_IFONTFAMILY and the IFontFamily::GetFamilyName function.
(3) If you are asking more generally, Windows and Mac both have system API calls to get this information, although those tend to deal with installed system fonts, not with arbitrary font files per se.
Also, you can parse the name table from a True Type or Open Type font without using any system APIs; as True Type and Open Type are well-documented standards. I would start by reading these:
The Naming Table
Font Names Table
(4) Although there are other standards, such as Type 1 (PostScript) fonts, and True Type Collection files and other formats, especially on Mac.
(5) Also, when you start down this road, you will quickly realize that your seemingly simple question is actually ambiguous, and that the answer is kind of complicated, because a font can have many names (a family name, a full font name, a style name, a PostScript name, etc.).
(6) And not only does a font have multiple names, it can have each of those names in multiple languages and encodings.
Any clarification would make this a better question.

How to get the actual value rather than pixel value in vision assistant

how to get the actual value rather than pixel value by vision assistant in my program.As shown in the figure this is my programme this is the result But i want to get this result

Check the documentation for the "ADF Dialog Framework"
It may help
Atilio

My iPhone getting stolen,how I get the actual location my iPhone way using the apps find my iPhone?

My iPhone getting stolen,how I get the actual location the full address to find my iPhone way using the apps find my iPhone?

If you set up the Find My iPhone service prior to your iPhone going missing - the app is for tracking a device from another iOS device - then there is a chance that can be tracked, though it depends on a number of factors (the iPhone is turned on, connected to either the 3G or a WiFi network, or has not had the Find My iPhone service disabled or the iPhone been completely restored). Log into icloud.com and go to the Find My iPhone section. If you did not set up Find My iPhone, check with your cell carrier. Some carriers offer their own tracking service, though you usually have to pay for it.
If your carrier does not offer such a service and you did not set up Find My iPhone, then there is no way to track the unit. Contact the police and change any passwords for any online accounts you may have used from your iPhone (the iTunes Store, for instance).
Regards.

How to get the actual screen size

Hi,
I have to get the actual screen size of the cliend in an applet, if i use method
Dimension dmx = Toolkit.getDefaultToolkit().getScreenSize();
it does not gives the actual screen size, like the screen size will be different if the application bar ( where we have start button on windows ) is Auto hide, and will be different it is not Auto Hide, or some users ike to keep the application bar on right or left of screen or on top..
So how do we get the actual display size of screen

Hi,
I got how to do if using applet
in screen object of java script we have methods to get the available width and availabe size
screen.availWidth
screen.availHeight
here is the link for more info
http://developer.netscape.com/docs/manuals/js/client/jsref/screen.htm
http://forum.java.sun.com/thread.jsp?thread=275329&forum=57&message=1063410

How to get the actual height of JEditorPane?

I have a basic question on the JEditorPane. Do I have to show the JEditorPane on a temporary Frame in order to get the actual height? My work around is to show the JEditorPane on a frame, get the JEditorPane height, then dispose the frame. It would be nice if I can get the actual height of JEditorPane without showing the frame.
This is test my code.
import java.awt.*;
import java.lang.*;
import java.net.*;
import javax.swing.*;
public class Test {
public static void main (String [] args) {
double w = 0;
double h = 0;
JEditorPane editorPane = null;
try {
URL url = new URL("file:test.html");
editorPane = new JEditorPane(url);
} catch (Exception e) {}
editorPane.setPreferredSize(new Dimension(400, 700));
w = editorPane.getWidth();
h = editorPane.getHeight();
// output "width: 0 height: 0"
System.out.println("width: " + w + " height: " + h);
// This my work around the get the actual height
JScrollPane scrollPane = new JScrollPane(editorPane);
JFrame frame = new JFrame("TESTING");
frame.getContentPane().add(scrollPane);
frame.pack();
frame.show();
// wait for loading data
try {
Thread.sleep(20000);
} catch (Exception e) {}
w = editorPane.getWidth();
// actual height based on the width and the size of test.html
h = editorPane.getHeight();
// output "width: 597 height: 24320"
// 24320 is the actual height that i want
System.out.println("width: " + w + " height: " + h);
frame.dispose();

This thread uses a PropertyChangeListener to notify you when the page is finished loading.
http://forum.java.sun.com/thread.jsp?forum=57&thread=333171

How to get the Actual Query of View Object

Hi all,
I have a standard. I need to modify the query of the VO attached to a picklist based on responsibility. I am able to achieve my requirement but it is getting reflected for all the responsibilities even though i extended the controller for a particular responsibility. I used setQuery() to change the query of my VO. When checking "About this page". The code i added also shown in the page. Now i want to get the actual query to the VO before the controller is extended so that i can set the modified query or actual query based on my responsibility. Kindly share your knowledge.
Regards,
Pradeep

Hi,
I guess following query will not work ,Why use 2 where clauses.
SELECT * FROM (select NVL(VENUE_NAME,' ') "Venue",
NVL(VENUE_CITY,' ') "City",
NVL(COUNTRY_DESC,' ') "Country",
EVENT_NUMBER
From NS_EVENT_VENUE_DETAILS,NS_COUNTRY_MASTER WHERE COUNTRY_CODE = VENUE_COUNTRY) QRSLT WHERE (QRSLT.EVENT_NUMBER = 1539
you can as following using bind variable.
http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcquerying.htm#CEGDGIJH

Quick question: How to get the scrolled page number using af:table

Hi,
When using range paging on scrolled table, how to get the current scrolled page number(1,2,3...), for example when moving the table vertical scroll bar forward or backward, is there any method in ViewObjectImpl class that I can use to get such information? I have seen the method scrollToRangePage(int i), but when scrolled ("Fetching data..."), it doesn't not get into this method. So it is wrong usage for this method, right?
Thanks

Didn't you just ask that question in this thread?: How to catch the page number when using scroll table in ADF 11g?
A bit of patience might be in order.
CM.

How to get the actual page cordinate a field

Similar Messages

Maybe you are looking for