How to get the all instances in which I acted on any of the activity?

Hi all,
Consider that in a Process there are three Activities named
1. Create Proposal Role : Initiator
2. Routed to Primary Owner Approval Role : Primary Owner
3. Routed to Manager Approval Role : Manager
Suppose I'm a Participant having access to PrimaryOwner Role. Some X, Y, Z persons created 3 instances whcih is now in "Routed to Manager Approval" activity or completed. I acted only on 2 instances and the other some one else acted. How can i get the 2 instances in which i acted . What is the way to acheive this PAPI 6.0 or Stuio 6.0?
Thanks in advance,
Sana

Doing something similar, using following code in a screenflow called from a global activity:
ps = new ProcessService();
ps.connectTo(url :Fuego.Server.directoryURL, user : "username", password : "password");
InstanceFilter filter = ps.getFilterFor(viewId : "myHidView");
filter.searchScope = SearchScope(participantScope : ParticipantScope.ALL, statusScope : StatusScope.ONLY_INPROCESS);
// have tried the filter using both methods below
//filter.setParametricValueTo(variable : "myvar", value : myDesiredVarValue);
filter.addAttributeTo(variable : "myvar", comparator : Comparison.IS, value : myDesiredVarValue);
instances = ps.getInstancesByFilter(filter : filter);
I get the following error in the engine log:
Unable to receive the message because of a serialization error. Caused by: fuegoblock.papi.Instance fuego.rmi.spi.SerializationException: Unable to receive the message because of a serialization error. at fuego.rmi.spi.BaseConnection.send(BaseConnection.java:101) at fuego.rmi.ServerCluster.send(ServerCluster.java:226) at fuego.rmi.ServerCluster.sendResult(ServerCluster.java:495) at fuego.rmi.ServerCluster.access$400(ServerCluster.java:50) at fuego.rmi.ServerCluster$1.put(ServerCluster.java:590) at fuego.component.ExecutionThread.sendResult(ExecutionThread.java:523) at fuego.component.ExecutionThreadContext.doClientInvoke(ExecutionThreadContext.java:668) at fuego.component.ClientRemoteComponent.doInvocation(ClientRemoteComponent.java:303) at fuego.component.ClientRemoteComponent.invoke(ClientRemoteComponent.java:160) at fuego.component.ExecutionRelayedThrowable.execute(ExecutionRelayedThrowable.java:94) at fuego.server.execution.TaskExecution.handleExecutionRelayedThrowable(TaskExecution.java:802) at fuego.server.execution.TaskExecution.handleComponentExecutionException(TaskExecution.java:753) at fuego.server.execution.TaskExecution.executeCIL(TaskExecution.java:493) at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:677) at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:638) at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:451) at fuego.server.execution.GlobalTaskExecution.executeGlobalCIL(GlobalTaskExecution.java:164) at fuego.server.execution.Global.continueCil(Global.java:68) at fuego.server.AbstractProcessBean$39.execute(AbstractProcessBean.java:2515) at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:291) at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:462) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:540) at fuego.transaction.TransactionAction.start(TransactionAction.java:213) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:118) at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66) at fuego.server.AbstractProcessBean.runGlobalActivity(AbstractProcessBean.java:2508) at sun.reflect.GeneratedMethodAccessor114.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1477) at fuego.lang.JavaObject.invoke(JavaObject.java:185) at fuego.component.Message.process(Message.java:585) at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:759) at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:734) at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:140) at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:132) at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:257) at fuego.component.ExecutionThread.work(ExecutionThread.java:818) at fuego.component.ExecutionThread.run(ExecutionThread.java:397) Caused by: java.io.NotSerializableException: fuegoblock.papi.Instance at java.io.ObjectOutputStream.writeObject0(Unknown Source) at java.io.ObjectOutputStream.writeObject(Unknown Source) at java.util.ArrayList.writeObject(Unknown Source) at sun.reflect.GeneratedMethodAccessor87.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at java.io.ObjectStreamClass.invokeWriteObject(Unknown Source) at java.io.ObjectOutputStream.writeSerialData(Unknown Source) at java.io.ObjectOutputStream.writeOrdinaryObject(Unknown Source) at java.io.ObjectOutputStream.writeObject0(Unknown Source) at java.io.ObjectOutputStream.defaultWriteFields(Unknown Source) at java.io.ObjectOutputStream.writeSerialData(Unknown Source) at java.io.ObjectOutputStream.writeOrdinaryObject(Unknown Source) at java.io.ObjectOutputStream.writeObject0(Unknown Source) at java.io.ObjectOutputStream.writeObject(Unknown Source) at fuego.component.Message.writeObject(Message.java:665) at sun.reflect.GeneratedMethodAccessor93.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at java.io.ObjectStreamClass.invokeWriteObject(Unknown Source) at java.io.ObjectOutputStream.writeSerialData(Unknown Source) at java.io.ObjectOutputStream.writeOrdinaryObject(Unknown Source) at java.io.ObjectOutputStream.writeObject0(Unknown Source) at java.io.ObjectOutputStream.writeObject(Unknown Source) at fuego.component.Batch.writeObject(Batch.java:151) at sun.reflect.GeneratedMethodAccessor92.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at java.io.ObjectStreamClass.invokeWriteObject(Unknown Source) at java.io.ObjectOutputStream.writeSerialData(Unknown Source) at java.io.ObjectOutputStream.writeOrdinaryObject(Unknown Source) at java.io.ObjectOutputStream.writeObject0(Unknown Source) at java.io.ObjectOutputStream.writeObject(Unknown Source) at fuego.rmi.Packet.write(Packet.java:251) at fuego.rmi.spi.BaseConnection.send(BaseConnection.java:98) ... 38 more
Sorry for huge error message.
Is there a trick to getting the filtered set of instances from in the screenflow activity?

Similar Messages

How to get the active application users IP address in R12 by sql command

Hi ,
I need to know how to get the active application users IP in R12 by sql command
in order to kill any session by the IP address ?
Am working on 12.1.3 Application
And 11.2.0.3 Oracle Database
Thanks

936921 wrote:
Am still couldn't found the IP address for the connected Application users.
If there any select statement can help me with that?
Really? Then how do you explain me finding the following docs from the links I referenced above?
How To Find The IP Address Of The Client Machine From Where A Particular Forms User Is Connected ? (Doc ID 879092.1)
How to Track IP Address of the Form Session in Oracle application 11i (Doc ID 878931.1)
Where to find the Client IP Address for a Client in E-Business Suite? (Doc ID 1258415.1)
How To Get The terminal ID For The Machine From Which A User Is Logged To E-Business Suite Applications (Doc ID 751658.1)
Thanks,
Hussein

RRB-How to get the activity description instead of WBS element in the bill

Dear All,
I am using RRB DIP profile to do my Resource related billing
RRB-How to get the activity description instead of WBS element in the billing
document.Now iam able to get the cost and the quantity used as line items but instead of getting the respective line items in the invoice iam still getting the WBS
element description for all the activities.Can some body guide me to overcome this problem.
Assured reward points for your suggestions and help.
Thanking you,
Best regards,
R.Srinivasan

Dear All,
Please can any body help me for the same.IT is urgent.I will award you points.
thankyou,
Best regards,
R.Srinivasan

How to get the activity instance id and process id

Dear All,
For my case, my boss require the workflow program processor can be runtime assigned . After research, I found the coding example like below:
// dynamically assign a user to a role
rtm.addRuntimeDefinedUserToRole(
                  // process instance
                  prInstance,
                  // role name
                  "Processor",
                  // user that is assigned (IUser)
                  user,
                  // user context (IGPUserContext)
                  userContext);
// dynamically change the user assigned to a role for a particular task
String prInstanceID = prInstance.getID();
rtm.changeTaskProcessor(
                  // process instance ID
                  prInstanceID,
                  // activity instance ID
                  activityInstanceID,
                  // current user (IGPUserContext)
                  currentProcessorContext,
                  // new user (IGPUserContext)
                  newProcessorContext);
But I don't know how to get the process instance ID and activity instance ID before I can apply this api in my webdynpro application.
Any gentllement can give me an idea.
Thank you.
Regards
Eric

process = GPProcessFactory.getDesigntimeManager().getActiveTemplate(
                              // by specifying its ID "CCD2C3F1BED111DD9DFA005056A9416C",/
                                             /* and the user accessing it */ userContext);
     //          retrieve the Runtime Manager
     IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
     // create an empty role assignment list
     IGPProcessRoleInstanceList roles = rtm.createProcessRoleInstanceList();
     //Initialising the input params
     IGPStructure params =GPStructureFactory.getStructure(process.getInputParameters());
     params.setAttributeValue("Name",value);
     //Starting the process
     IGPProcessInstance prInstance = rtm.startProcess(process,"Process Name","Process name",user,roles,params,user);

How to get the activity of a user?

Hi Experts,
How can we get the activity of a user i.e. Which transaction a particular user has gone or some activity log on a particular date? Any table, FM or Tcode. I have already checked the STAD and SM20 transactions. Some authorization problem. So anything except these Tcodes would be helpful. Thanks in advance.
Regards,
Prashant.

>
santhosh kumar wrote:
> Hi,
>
> I guess if it is not updated or traced under STAD means, i.e. related to authorization failures etc.. kind of stuff will be saved at runtime only in the SAP memory.
>
> As it is stored in the buffer, can not be traced in any of the transaction.
> You should request the user to save and send the screen shot of the SU53 of the user whenever he gets some authorization issue.
>
> Based on that, by looking into the SUIM transaction, it can be known whether he is authorized or not, which roles have been assigned etc.. kind of details.
>
> Regards,
> Santhosh.
Hi Santosh,
Actually I am doing a root cause analysis for which I need to know whether a particular user has used a particular TCode. I guess the STAD will display only the current data, is there a TCode to display historical data related to user accessing a particular data. Note: I don't have basis authorization.
Regards,
Prashant

I am getting ready to wipe a PC clean but wanted to know how to get the activation code for the Version of Adobe reader that is currently installed on the PC?

I do not have the activation code for this PC and need to know how to get the software loaded back on it after a clean install of the OS and other programs.

If you use any additional subscription services to Adobe Reader, they are activated with your Adobe ID & password.

How to get the active Paragraph?

I have following TLF XML:
private var text:XML =
<flow:TextFlow fontSize="20" paddingRight="50" paddingBottom="50" paddingTop="50" paddingLeft="50" whiteSpaceCollapse="preserve" xmlns:flow="http://ns.adobe.com/textLayout/2008">
        <flow:p>
                 <flow:span>Hallo liebers Programmili... du tust schon langsam meinem koepchen weh</flow:span>
        </flow:p>
</flow:TextFlow>;
I try to get the Paragraph for a selection inside the text using following Methodes:
var index:int = tf.interactionManager.anchorPosition; // i get 29 here
var child:FlowElement = tf.getChildAtIndex(index); // undefined - it should be the flowElement containing the text... <flow:span></flow:span>
var para:ParagraphElement = test.getParagraph();//undefined - it should be the paragraph
I really started to enjoy the new framework... but now i am getting really mad
Can anybody imagine what i am doing wrong? The undefined itself makes me suspicious... shouldn't it be null?
Help would be much appriciated!

You are confusing index and position.
What you want is:
var position:int = tf.interactionManager.anchorPosition;     // this is a position not an index
var leaf:FlowLeafElement = tf.findLeaf(position);     // maps a position to a leaf
var para:ParagraphElement = leaf.getParagraph();     // find the leaf element's owning paragraph
Also consider whether you want the anchorPosition or the activePosition. In a point selection they are the same. In a block selection the anchor is where the block began and the active is the end being modified by the UI (mouse dragging and keys).
Hope that helps,
RIchard

Formatted Search: How 2 get the active value

Hi ,
I defined a simple FS to learn, but keep getting the same values for different codes.
Shortly, I have 2 tables, first one (
REASON) keeps ReasonID,Reason Description, etc.
In the second one (MAIN) I enter other unrelated data and ReasonID.
I wanna get Reason Description from REASON table into that MAIN table by the help of FS. So I defined something like that:
SELECT T0.U_ReaDesc from .[@REASON] T0 , .[@MAIN] T1 WHERE T0.U_ReasonID = T1.U_ReasonID</b>
When I use this query, I keep getting the same reason description for different reason codes, actually the description of the first data in the REASON table.
Ouery settings : Search By Saved Query - Auto Refresh - When exiting altered column - Column "REASONID "- Refresh regularly
I guess, I have to add or change something in the query, so that I can refer to the <u>activ ReasonID value</u> in the MAIN table and get the descr. for it.
(Sorry if this subject is handled before but I couldn't find anything related in SDN.)
Gü

Hi Gul,
Why don´t you download the help files from the SBO marketplace?
You can find a document about the FS under Service & Support SAP Business One Knowledge & Services Knowledge Base Customizing Formatted Searches.
There it explains lot of things about them.
The FieldId is the variable number seen when you are in debug mode. ColID is used only for matrix columns. And you could use 0 for the format is no formating is needed.
Regards,
Ibai Peñ

How to get the active document file name using illustrator CS2 plugin code?

I wanna take file name from active document using illustrator plugin CS2. Plz anybody help me..
Thanks in advance..

AIDocumentSuite::GetDocumentFileSpecification() should get you that information. Note that it will only work properly if you've already saved the document (or opened it from a file). I'm not sure what the result looks like if you're calling that on a new, unsaved file.

How to obtain the active version of a contract?

Function module BBP_PD_CTR_GETDETAIL and table CRMD_ORDERADM_H do not seem to filter the non-active contracts.
How to get the active version only.

It is at the item level. Refer to table BBP_PDIGP field ITM_RELEASED

How to get the list of unviewed Instances?

Hi All,
Can anyone tell me how to get the list of unviewed instances?
I want to get all the instances which have been scheduled but not viewed.
Please help me on this.
I tried to get the info from audit report but i could not able to achieve it.
is it possible from query builder?
Thanks,
Nagaveni

Hi Ravi,
Thank you for the reply!!
Then it is not possible to get the unviewed reports.
how does it work if i create a audit report with Viewed status and list of all instances then we can filter out the unviewed reports.
Does above solution is going to work?
i have not tried yet, seeking your opinion.

How to get the process instance key so as to retry a rejected task through api while ad provisoing?

Hi All,
How to get the process instance key so as to retry a rejected task through API while AD provisioing state?
API URL - http://docs.oracle.com/cd/E27559_01/apirefs.1112/e28159/toc.htm
Thanks

To retry a task that is in a rejected state, you use the SCH_KEY which is the task key. In OIM, all rejected tasks are listed in the OTI table. It contains all the important information about a rejected or pending task.
You can use the APIs found in the tcProvisioningOperationsIntf class to retrieve open tasks.
-Kevin

How to get the values of all elements and sub elements from following xml

how to get the values of all elements and sub elements from following xml...
<?xml version="1.0" encoding="UTF-8" ?>
<List_AML_Finacle xmlns="http://3i-infotech.com/Cust_AML_Finacle.xsd"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://3i-infotech.com/Cust_AML_Finacle.xsd List_AML_Finacle.xsd">
<TransactionID>TransactionID</TransactionID>
<Match>
<Src_Matched_Field>Src_Matched_Field</Src_Matched_Field>
<List_Matched_Field>
<FSFM_Matches>
<NUMBER>NUMBER</NUMBER>
<TERROR>TERROR</TERROR>
<TU>TU</TU>
<NAMEU>NAMEU</NAMEU>
<DESCRIPT>DESCRIPT</DESCRIPT>
<KODCR>KODCR</KODCR>
<KODCN>KODCN</KODCN>
<AMR>AMR</AMR>
<ADDRESS>ADDRESS</ADDRESS>
<SD>SD</SD>
<RG>RG</RG>
<ND>ND</ND>
<VD>VD</VD>
<GR>GR</GR>
<YR>YR</YR>
<MR>MR</MR>
<CB_DATE>CB_DATE</CB_DATE>
<CE_DATE>CE_DATE</CE_DATE>
<DIRECTOR>DIRECTOR</DIRECTOR>
<FOUNDER>FOUNDER</FOUNDER>
<TERRTYPE>TERRTYPE</TERRTYPE>
</FSFM_Matches>
<OfacMatchDetails>
<UID>UID</UID>
<TITLE>TITLE</TITLE>
<SDNTYPE>SDNTYPE</SDNTYPE>
<REMARKS>REMARKS</REMARKS>
<ID_UID>ID_UID</ID_UID>
<IDTYPE>IDTYPE</IDTYPE>
<IDNUMBER>IDNUMBER</IDNUMBER>
<IDCOUNTRY>IDCOUNTRY</IDCOUNTRY>
<ISSUEDATE>ISSUEDATE</ISSUEDATE>
<EXPIRATIONDATE>EXPIRATIONDATE</EXPIRATIONDATE>
<ADDRESS1>ADDRESS1</ADDRESS1>
<ADDRESS2>ADDRESS2</ADDRESS2>
<ADDRESS3>ADDRESS3</ADDRESS3>
<CITY>CITY</CITY>
<STATEORPROVINCE>STATEORPROVINCE</STATEORPROVINCE>
<POSTALCODE>POSTALCODE</POSTALCODE>
<COUNTRY>COUNTRY</COUNTRY>
</OfacMatchDetails>
</List_Matched_Field>
</Match>
</List_AML_Finacle>

avoid multi post
http://forum.java.sun.com/thread.jspa?threadID=5249519

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help says File >Library >Export playlist and choose XML, or to save a copy of all your playlists, File > Library > Export Library, "the Exported info is saved in XML format." Then it says, "to import an iTunes playlist, File > Library > Import Playlist". Now I am assuming I do that import part on the Air, but when I try it doesn't recognize anything that can be imported - what am I missing??? Aside from a clue...

Thanks, Jim, for taking the time, but the reply is unfortunately vague in the exact area of my confusion! "you need to copy that file to your new computer..." Well, the Import/Export instructions make it seem as if the two computers should be able to communicate this file thru wifi, but that's the linkage I can't seem tocreate with Import/Export. Should I instead email a copy to myself (thats what applecare suggested)? Copy it to and from a thumb drive? But then place the file where? And the article was helpful, but should I be trying to move the Library file or the Library.xml file (as iTunes Help suggests)? Sorry to be so clueless about it...I suppose I buy Apple in the hopes of not having to think about this stuff, which approach seems not to be serving me well. Thanks again for your time!

How to get the role name in which query is published ?

Hi Experts,
Is there any table where i can get the name of the role in which a particular query is published. I know that if i have a role , i can check in pfcg giving that role name and in menu tab i can see all the queries published under that role. But if i know query but not role how to get the role name . Is there any table or functon modules or programs to get the information.
Thanks & Regards
Vamsi Kiran

Check this table
AGR_HIER

How to get the all instances in which I acted on any of the activity?

Similar Messages

Maybe you are looking for