How to get the blending mode to carry over to the next comp.

Hey all.
I have a project going that involves several comps, and one of those comps involves setting the transfer mode of some layers to add, in order to get rid of the black background. The problem is, when i drop this comp into another comp, the black is back, and I need to set the transfer mode again, which messes with the colors of all the other objects in the previous comp.
Is there a way to make sure that once a transfer mode is selected, that it stays that way even when the comp is dropped into another comp?
Thanks

and one of those comps involves setting the transfer mode of some layers to add, in order to get rid of the black background.
Well, no offense, but that's a rubbish workflow. If you need genuine transparency, then create it properly. It's as simple as that. Use Shift Channels, the Channel Combiner or any other effects to "unmultiply" your layers or rewire channels. Doesn't even matter whether you do it on your source layers or the combined result of your additively blended layers - whichever works best to give the desired look.
Mylenium

Similar Messages

How to get the next FACTORYDATE

Hello all,
Can somebody show me how to get the next (FACTORYDATE) from SAP in the objective to check and validate the shipto date in the ISA b2b application.
Thanks in advance.

Hi Manuel,
my email: [email protected]
thank you in advance,
Djamel.

How to get the Next Material Document Number

Hi,
Please let me know How to get the next Material Document Number using Functional Module,
Material Document number are in MSEG table.
Regards,
Ganesh

Hi Ganesh,
if you want the next matrial number then first of all you have to define it as a number range in transaction snro.After creating the number range you have to define the interval.
now you can use your number range by calling the function module
CALL FUNCTION 'NUMBER_GET_NEXT'
      EXPORTING
        nr_range_nr             = '01' " here you have to give the number range number which you have defined in number range
        object                  = 'ZPRODLOG' " Number Range
      IMPORTING
        number                  = wa_prod_error_log-seqnr " sequence number generated,in your case material number field
      EXCEPTIONS
        interval_not_found      = 1
        number_range_not_intern = 2
        object_not_found        = 3
        quantity_is_0           = 4
        quantity_is_not_1       = 5
        interval_overflow       = 6
        buffer_overflow         = 7
        OTHERS                  = 8.
each and every time next number will get generated .
i hope this will help you.
Thanks,
Tanmaya

TA48312 i have mac os x version 10.4.11 i have no idea how to get the next update because my computer wont do it on its own.

i have mac os x version 10.4.11 i have no idea how to get the next update because my computer wont do it on its own.

10.4.11 is as far as you can go with Tiger. You have to pay for the next update. It is not available via Software Update. Depending on which Mac you have, it can be Leopard, Snow Leopard, or Lion.

How to get the Next free Number for External Number Range

Hi ,
To get next free number for External Number Range, I have used NUMBER_GET_NEXT Function module.
It is throws the exception like NUMBER_RANGE_NOT_INTERN.
How can i get the next free number for external number range object. And How to update the Current Number for External Number Range Object
Scenario.
Call Function module              NUMBER_GET_NEXT
Import Parameter.
NR_RANGE_NR : 02
OBJECT            : RV_BELEG
QUANTITY         : 00000000000000000001
I am getting Exception : NUMBER_RANGE_NOT_INTERN
Thanks in advance.
Regards
Ram

Hi Anand,
The SAP system issues the numbers for internal number range intervals automatically. This number is between the from-number and the to-number. The last number issued is logged in the current number level.
You need to enter a number for external number issue. The number you enter needs to be between the from-number and the to-number. For external number ranges, the number number used is not logged. So the next available number is not possible in a straight forward way.
Only for Internal number ranges, the FM NUMBER_GET_NEXT can get the next available number.
Hope this helps.
Thanks,
Balaji

How to get custom iCal colors to carry over to iPad or iPhone calendars

How do I get custom calendar colors designated on my iMac to carry over to my iPad or iPhone? It used to do so, and now it no longer does.

Thanks Joe. We have discovered from this forum, actually, that if you send the photos from the iPhone, if that's where they were taken, then you are asked what size.
"If you send from the camera, then you get the option of reducing the size. If you send from your other photos synced from your computer, they don't have that option of reducing."
I tested it by sending a couple of photos taken by my iPhone, and sure enough, was asked as to size. Then sent the same two photos from my iPad (Photostream) and was not asked. Interestingly though, the sizes were identical in both emails.

How to get the next Date

Hi All,
I have a date field in which when i enter the date and click on the button I should display the next day in another inputfield.
Ex: If i enter 12th Nov 2008 (11/12/2008)i should get 13th Nov 2008 (11/13/2008)
in the other input field.
Thank You in Advance.

Hi,
Following is the sample code based on todays date
Date dt = new Date(Calendar.getInstance().getTimeInMillis());
          Calendar calendar = Calendar.getInstance();
          calendar.add(Calendar.DATE, 1);
          System.out.println(calendar.getTime());
OR
//Specifically for your sample dates
Calendar calendar = Calendar.getInstance();
          calendar.set(Calendar.MONTH, 10);
          calendar.set(Calendar.DATE, 12);
          calendar.set(Calendar.YEAR, 2008);
          System.out.println(calendar.getTime());
          calendar.add(Calendar.DATE, 1);
          System.out.println(calendar.getTime());
Regards
Ayyapparaj

How to get the next working date?

Hi,
I need to extract data between the 2nd of the month, and second working date of the following month.
Here is the code I have to check if the date is a weekend, and check if it is in the Holidays table (for UK Holidays):
(This code is to check against Easter 2014, so Good Friday was on the 18th of April, Easter Monday was on the 21st, and the date I want returned is Tuesday the 22nd but I cannot get it working correctly).
declare @LatestDate datetime
set @LatestDate = DATEADD(m,-9,getdate()) -- cast('01/11/2014' as datetime) --dateadd(m,1,datediff(d,0,'01/11/2014'))
set @LatestDate = DATEADD(d,13,@LatestDate)
print @LatestDate
if datepart(dw,@LatestDate) in (1,7)
Begin
while datepart(dw,@LatestDate) in (1,7)
OR
exists (select * from Hermes_Rep..Holidays where Holiday =right(CONVERT(CHAR(10), @LatestDate, 101),4) + '-' + left(CONVERT(CHAR(15), @LatestDate, 101),2) + '-' + SUBSTRING(CONVERT(CHAR(15), @LatestDate, 101),4,2))
Begin
set @LatestDate=DATEADD(d,1,@LatestDate)
End
End
What I need is for my code to always return the 2nd working day of any month, taking into account weekends, and Holidays in the Holidays table.
The Holidays table has dates in the format '2014-04-18 00:00:00' (for Good Friday 2014)

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI-ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI-ISO Standard SQL. And you need to read and download the PDF for:
https:--www.simple-talk.com-books-sql-books-119-sql-code-smells-
>>Here is the code I have to check if the date is a weekend, and check if it is in the Holidays table (for UK Holidays): <<
Do you know what a calendar table is?
>> (This code is to check against Easter 2014, so Good Friday was on the 18th of April, Easter Monday was on the 21st, and the date I want returned is Tuesday the 22nd but I cannot get it working correctly). <<
Catholic or Orthodox Easter? This is one of many reasons we do not use computations in SQL. What you did is the wrong approach done with bad programming. For example, we do not use the old Sybase getdate() now. The only display format allowed in
ANSI/ISO Standard SQL, but you used a local dialect!
COBOL treats dates as strings like you did; SQL has a temporal data type.
>> What I need is for my code to always return the 2nd working day of any month, taking into account weekends, and Holidays in the Holidays table. <<
The idea of a Holiday table is bad; why are these dates totally different entities from other dates? Would you split Personnel on sex and have “Male_Personnel” and “Female_Personnel”?
The Julian business day is a good trick. Number the days from whenever your calendar starts and repeat a number for a weekend or company holiday.
CREATE TABLE Calendar
(cal_date DATE NOT NULL PRIMARY KEY,
julian_business_nbr INTEGER NOT NULL,
INSERT INTO Calendar
VALUES ('2007-04-05', 42),
('2007-04-06', 43), -- good Friday
('2007-04-07', 43),
('2007-04-08', 43), -- Easter Sunday
('2007-04-09', 44),
('2007-04-10', 45); --Tuesday
To compute the business days from Thursday of this week to next
Tuesdays:
SELECT (C2.julian_business_nbr - C1.julian_business_nbr)
FROM Calendar AS C1, Calendar AS C2
WHERE C1.cal_date = '2007-04-05',
AND C2.cal_date = '2007-04-10';
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

How to get the fixed result in a DES/CBC mode with fixed input data and fix

How to get the fixed result in a DES/CBC mode with fixed input data and fixed key. Below is my program , I tried to get the checksum of the DESInputData with the DESKeyData, but each time the result is different.
below is my code:
byte[] DESKeyData = {(byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01, (byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01 };
byte[] DESInputData = {(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31,(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31 };
SecretKeySpec skey = new SecretKeySpec( DESKeyData, "DES" );
Cipher cipher = Cipher.getInstance("DES/CBC/NoPadding");
cipher.init( Cipher.ENCRYPT_MODE, skey );
byte[] result = cipher.doFinal( DESInputData );

Use class javax.crypto.spec.IvParameterSpec to specify IV for CBC mode cipher:
// Create CBC-mode triple-DES cipher.
Cipher c = Cipher.getInstance("DESede/CBC/PKCS5Padding");
// Specify IV.
IvParameterSpec iv = new IvParameterSpec(new byte[] { (byte)0x01, (byte)0x23, (byte)0x45, (byte)0x67, (byte)0x89, (byte)0xAB, (byte)0xCD, (byte)0xEF });
// Initialize cipher with proper IV.
c.init(Cipher.ENCRYPT_MODE, yourKey, iv);
// Encrypt and decrypt should work ok now.
For more info about cryptography, search the Internet for IntroToCrypto.pdf from mr. Phil Zimmerman. This document is also part of PGP (http://www.pgp.com).
An excellent book is 'Applied Cryptography' from Bruce Schneier (http://www.counterpane.com/applied.html).
Regards,
Ronald Maas

How to get the Key mode

Hello
Let me ask a question about key mode.
I'm trying to catch the timing when both Shift-Key and Esc-Key are pressed.
Using the Edge Animate's document.keydown events , I can get the chance when the Shift-Key is pressed.
At the same time I need to know the Esc-Key's mode , pressed? or released?.
Does anyone know how to get the Ket mode?
regards

Thank you very much heathrowe.
hmm, It seems to be the same thing.
If users release [Esc-key] first and [Shift-key] next, this script works.
But it doesn't work in the contrary case.
To cover both cases, the system have to grasp the STATE of the keys, not EVENT.
I've made an example below .....
This script can hold the state of the keys.
[Note 1] This time I used [Esc-Key] and [z-key] , because the task manager opens
             when [Shift-Key] and [Esc-key] is pressed in case of Chrome.
[Note 2] I used text-box named "Result" as an output tool instead of the alert tool,
             because the variables (KeyFlagShift / KeyFlagZ) freeze using an alert tool
            for some unknown reason.
// ****** compositionReady ******
sym.setVariable("KeyFlagShift" , false);
sym.setVariable("KeyFlagZ" , false);
// ****** KeyUp ******
switch(e.which){
          case 16:
                              sym.getComposition().getStage().setVariable("KeyFlagShift" , false);
                              break;
          case 90:
                              sym.getComposition().getStage().setVariable("KeyFlagZ" , false);
                              break;
// ****** KeyDown ******
switch(e.which){
          case 16:
                              sym.getComposition().getStage().setVariable("KeyFlagShift" , true);
                              break;
          case 90:
                              sym.getComposition().getStage().setVariable("KeyFlagZ" , true);
                              break;
var KeyS = sym.getComposition().getStage().getVariable("KeyFlagShift");
var KeyZ = sym.getComposition().getStage().getVariable("KeyFlagZ");
if(KeyS == true && KeyZ == true){
          sym.getComposition().getStage().$("Result").text(" Shift + Esc was pressed");
}else{
          sym.getComposition().getStage().$("Result").text(" -------");

How to get the alv saved in background mode without modifying the program?

Hi all,
I have to run a standard report(IW39) in background and save the result ALV as excel or text file.
How to get the result saved in excel / text format if I don't want to customize the standard program?
(In the spool, there is an option to save list in file "Spreadsheet", but the saved format is not what we expected.
It is expected the data to be put is separated in each column / tab-delimited in the text file....)
Many Thanks!

I don't have any ready made coding examples, but using the F1 help on SUBMIT statement will help to get you quite a way:
DATA list_tab TYPE TABLE OF abaplist.
SUBMIT 'RIAUFK20'
USING SELECTION-SCREEN
EXPORTING LIST TO MEMORY
              AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = list_tab
EXCEPTIONS
    not_found = 1
    OTHERS     = 2.
IF sy-subrc = 0.
CALL FUNCTION 'WRITE_LIST'
    TABLES
      listobject = list_tab.
ENDIF.
Edited by: Micky Oestreich on May 18, 2009 8:18 AM

How to get the Useru2019s position when the user doesnu2019t have CP relation

We have a custom program which will add / delete attributes (In transaction PPOSA_BBP). It is working fine for users which were assigned with CP relation But it fails for users which doesnu2019t have CP relation (since we are getting the position of users form HRP1001 then we are retrieving the existing attributes based on the position after that updating the attributes) as we are getting the position from HRP1001 it fails for users were no CP relation.
Help us how to get the Useru2019s position when the user doesnu2019t have CP relation. Suggest us any function module or how to query the HRP1001 or some other table if exists
Regards
Paul

Hi Paul,
Have a look at these tables.
Using table BUT000 the central business partner data are stored, f.e. partner type, partner names, partner number, partner guid, person number, etc. In table BUTBKK the bank data to a business partner are stored.
Central business partner address data
The table ADRC is used for the address of a business partner. Table BUT020 links the business partner number with the address number. Using table BUT021 several addresses to a business partner with different usages (modes), f.e. correspondence or delivery address, can be stored. The personal data of a business partner person are stored with key person number in table ADRP. The person number is assignd to a business partner person in table BUT000. Communication data of business partners as e-mail, telephone, fax, etc. are stored in the tables ADDR1 u2013 ADDR12. The business address of a contact person or an employee consists of the organization address (company resp. org.-unit) and of an address addition, which describes f.e. a building, a room number, etc. The address addition is stored in table ADCP and is identified by the keys address number of the organization address and person number.
Relationships between business partners
Table BUT050 contains the relationships between a business partner organization and a business partner person using relation types. The relation types are defined in table TBZ9, f.e. the relation type u2018has employeeu2019 corresponds to identifier u2018BUR010u2019, the relation type u2018has contact personu2019 corresponds to identifier u2018BUR001u2019. Table BUT051 stores communication data of a contact person relationship (compare to table ADCP). Table BUT052 stores several address numbers to one business partner relationship (including a standard flag).
Hope this helps,
Kind Regards,
Matthew

How to get the number of years, months with two sysdate()

Hi All,
Sorry for posted another question regarding the conversion.
I have the hiring day and current day in date format like : '2005-10-01' and '2006-09-14'
How to get the differences between current date is ('2006-09-01') and
hiring date is ('2004-10-01' )
in the format number of years and number of month without using the Mod
function . For this example the result is : 2 years 1 month
Thanks
JP

How to get the differences between current date is ('2006-09-01') and
hiring date is ('2004-10-01' )
in the format number of years and number of month without using the Mod
function . For this example the result is : 2 years 1 monthshould not it be 1 year 11 months???
SQL> select (date '2006-09-01' - date '2004-10-01') year to month diff from dual;
DIFF
+01-11

How to get the files in presentation server while uploading?

how to get the files in presentation server while uploading?
give me the function module name

Hi,
PARAMETERS: P_FILE LIKE RLGRAP-FILENAME DEFAULT C_PRES. "Prsnt Srvr
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      DEF_PATH         = P_FILE
      MASK             = ',..'
      MODE             = '0 '
      TITLE            = 'Choose File'
    IMPORTING
      FILENAME         = P_FILE
    EXCEPTIONS
      INV_WINSYS       = 1
      NO_BATCH         = 2
      SELECTION_CANCEL = 3
      SELECTION_ERROR = 4
      OTHERS           = 5.

Need how to get the data from the external file in eCatt

Hi ,
Could any body suggest how to get the values from the external file(Excel,CSV file,Text file) and pass it as varaiable in ecatt Test script.
Problem: Need to execute FK01-Vendor creation Transaction with multiple set of data .As per my understanding we could achive through Variants in Testdata set in eCatt .
But is there any way to store the data in excell file and get the data and pass it to FK01 Test scripts
Appreciate response on this

Hi
See the links they may be useful
check these link,
eCATT- An Introduction
/people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
Creating Test Scripts
/people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
eCATT Logs
/people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
eCATT Scripts Creation TCD Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
Creation of Test Data Container
/people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
eCATT Scripts Creation - SAPGUI Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
Integrating ECATT & MERCURY QTP Part -1
/people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
Using eCatt to Test Web Dynpro ABAP
/people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
and
-command reference
http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
/people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
http://prasadbabu.blogspot.com
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
http://www.erpgenie.com/ecatt/index.htm
hope this helps.
Reward points for useful Answers
Regards
Anji

How to get the blending mode to carry over to the next comp.

Similar Messages

Maybe you are looking for