How to get the correct sql command in oracle?
Hi sir,
i am using this query in sql that is :
SELECT C.*,ISNULL(P.Comp_Name,'') + ' (' + ISNULL(P.Comp_ID,'') + ')' Parent FROM Comp_Master C LEFT JOIN Comp_Master P ON C.Parent_ID = P.Comp_ID Where C.Comp_ID='004'
so i am getting in parent column value like this: "PARIS GROUP (001)"
but the same command i converted in sql developer that is:
SELECT C.* ,NVL(P.Comp_Name, ' ') || ' (' || NVL(P.Comp_ID, ' ') || ')' as Parent FROM Comp_Master C LEFT JOIN Comp_Master P ON C.Parent_ID = P.Comp_ID WHERE C.Comp_ID ='004'
but not getting in parent column value its coming only ( )
help me.
thanks
Welcome to Oracle.
It has manuals.
http://tahiti.oracle.com/
Choose your version, which you continue to keep a mystery
E.g.
http://www.oracle.com/pls/db112/homepage
Including Oracle SQL syntax
http://docs.oracle.com/cd/E11882_01/server.112/e26088/toc.htm
Which you will find useful since Oracle does not run Microsoft SQL as you continue to find over and over again.
And there is a 2 day getting started as a developer guide, which you appear to desperately need,
http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/toc.htm
If you have any specific questions about anything you read in there, come back in a couple of days after you have finished reading them.
Similar Messages
-
How to get the correct stored procedure in oracle
Hi sir,
i am having one stored procedure which i converted from sql it's compiled successfully.
create or replace
PROCEDURE Spvalidateholiday1
v_pidate1 IN Date DEFAULT NULL ,
v_piEmpid IN VARCHAR2 DEFAULT NULL ,
v_pidate2 IN Date DEFAULT NULL ,
v_poRetVal OUT Number
--RETURN NUMBER
AS
v_date3 VARCHAR2(20);
v_date4 VARCHAR2(20);
v_date5 VARCHAR2(40);
v_date6 VARCHAR2(40);
v_scode VARCHAR2(10);
v_dayoff1 VARCHAR2(20);
v_dayoff2 VARCHAR2(20);
BEGIN
v_date5 := To_Char(To_Date(v_pidate1,'YYYY-MM-DD','D'));
v_date6 := To_Char(To_Date(v_pidate2,'YYYY-MM-DD','D')) ;
SELECT Shift_Code
INTO v_scode
FROM Employee
WHERE Emp_ID = v_piEmpid;
SELECT WeeklyOff1
INTO v_dayoff1
FROM Shift
WHERE Shift_Code = v_scode;
SELECT WeeklyOff2
INTO v_dayoff2
FROM Shift
WHERE Shift_Code = v_scode;
SELECT dayid
INTO v_date3
FROM Weekly
WHERE dayss = v_dayoff1;
SELECT dayid
INTO v_date4
FROM Weekly
WHERE dayss = v_dayoff2;
--select @date3=dayid from Weekly w join Site_Param s on w.dayss=s.WeeklyOff1
--select @date4=dayid from Weekly w join Site_Param s on w.dayss=s.WeeklyOff2
IF ( v_date5 = v_date3
OR v_date6 = v_date4
OR v_date4 = v_date5
OR v_date3 = v_date6 ) THEN
BEGIN
v_poRetVal := 0 ;
END;
ELSE
BEGIN
v_poRetVal := 1 ;
END;
END IF;
RETURN; --v_poRetVal;
END;
but getting error:
ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'SPVALIDATEHOLIDAY1' ORA-06550: line 1, column 7: PL/SQL: Statement
could u check the stored procedure?
thanksHi sir,
i am calling it my application
that is used like this
Dim hshParam As New Hashtable
hshParam.Add("Empid", '00000002')
hshParam.Add("date1", '2012-10-25')
hshParam.Add("date2", '2012-10-27')
intRetProc = objDataTier.ExecuteStoredProcedureWithReturnT("Spvalidateholiday1", hshParam)
and here is this method written:
Public Function ExecuteStoredProcedureWithReturnT(ByVal sStroredProcedureName As String, ByVal phshTbl As Hashtable) As Integer
Dim cmdCommand As OracleCommand
Dim prmParmOutput As OracleParameter
Dim pParam As IDictionaryEnumerator = phshTbl.GetEnumerator
Dim sKey As String, sValue As String
Try
ExecuteStoredProcedureWithReturnT = True
OpenDbConnection()
cmdCommand = New OracleCommand(sStroredProcedureName, conConnection)
cmdCommand.CommandType = CommandType.StoredProcedure
cmdCommand.CommandTimeout = 0
While pParam.MoveNext
sKey = "v_pi" & pParam.Key
sValue = pParam.Value
cmdCommand.Parameters.Add(New OracleParameter(sKey, sValue))
End While
prmParmOutput = New OracleParameter
cmdCommand.Parameters.Add(New OracleParameter("v_poRetVal", SqlDbType.Int)).Direction = ParameterDirection.Output
' If
cmdCommand.ExecuteNonQuery()
ExecuteStoredProcedureWithReturnT = CInt(cmdCommand.Parameters("v_poRetVal").Value)
Catch ex As Exception
ExecuteStoredProcedureWithReturnT = 2
Throw ex
End Try
End Function
now tell me is it correct? -
The dates my photos were taken are not incorrect. Any suggestions on how to get the correct dates back?
Thank you Winston. This works and I can adjust several photos at the same time.
-
How do I write this SQL command in Oracle
Hi all
I wriote this SQ L statement in Ms SQL Server. How do I write this sql command in Oracle?
ALTER VIEW dbo.ConsumptionAS SELECT TOP 100 PERCENT ID,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200710' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Oct2007,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200711' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Nov2007,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200712' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Dec2007,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200801' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Jan2008,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200802' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Feb2008,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200803' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Mar2008,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200804' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Apr2008,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200805' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS May2008,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200806' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Jun2008 ,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200807' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Jul2008 ,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200808' AND NbrDaysUsed != 0 THEN (QtyUsed/ NbrDaysUsed) * 748.05 ELSE 0 END)) AS Aug2008,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200809' AND NbrDaysUsed != 0 THEN (QtyUsed NbrDaysUsed) * 748.05 ELSE 0 END)) AS Sep2008
FROM dbo.MasterConsumption WHERE YEAR_MONTH >= '200710' AND YEAR_MONTH <= '200809' GROUP BY ID ORDER BY ID
I am very interested in this part:
SUM(CASE WHEN YEAR_MONTH = '200710' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Oct2007
thanks
Edited by: user631364 on Oct 27, 2008 8:25 AM
Edited by: user631364 on Oct 27, 2008 8:26 AM
Edited by: user631364 on Oct 27, 2008 8:27 AMThank you!!
Now let me aslk the second part of my question.
This sql command:
ALTER VIEW dbo.ConsumptionAS SELECT TOP 100 PERCENT ID,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200710' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Oct2007,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200711' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Nov2007,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200712' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Dec2007,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200801' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Jan2008,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200802' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Feb2008,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200803' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Mar2008,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200804' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Apr2008,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200805' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS May2008,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200806' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Jun2008 ,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200807' AND NbrDaysUsed != 0 THEN (QtyUsed/ Days_Usage) * 748.05 ELSE 0 END)) AS Jul2008 ,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200808' AND NbrDaysUsed != 0 THEN (QtyUsed/ NbrDaysUsed) * 748.05 ELSE 0 END)) AS Aug2008,
CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = '200809' AND NbrDaysUsed != 0 THEN (QtyUsed NbrDaysUsed) * 748.05 ELSE 0 END)) AS Sep2008
FROM dbo.MasterConsumption WHERE YEAR_MONTH >= '200710' AND YEAR_MONTH <= '200809' GROUP BY ID ORDER BY ID
was created with this query in SQL Server and then I saved it in a store procedure, that I scheduled to run montlhy
SET ANSI_NULLS ON
DECLARE @SQLString NVARCHAR(4000)
/* Build the SQL string once.*/
SET @SQLString = 'ALTER VIEW dbo.Consumption AS SELECT TOP 100 PERCENT ID, CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = ' +
"'" + dbo.CONLastMonth_fn(getdate(), month(getdate()) - 12) +
"'" +
' AND NbrDaysUsed != 0 THEN (QtyUsed/ NbrDaysUsed) * 748.05 ELSE 0 END)) AS ' +
dbo.CONMonthInEnglish(getdate(), month(getdate()) - 12) +
… (GOES FROM current month -12 to current month -1)
, CONVERT(decimal(10, 2), SUM(CASE WHEN YEAR_MONTH = ' +
"'" + dbo.CONLastMonth_fn(getdate(), month(getdate()) - 1) +"'" +
' AND NbrDaysUsed != 0 THEN (QtyUsed/ NbrDaysUsed) * 748.05 ELSE 0 END)) AS ' +
dbo.CONMonthInEnglish(getdate(), month(getdate()) - 1) +
' FROM dbo.MasterConsumption WHERE YEAR_MONTH >= ' +
"'" + dbo.CONLastMonth_fn (getdate(), month(getdate())-12 ) +"'" +
' AND YEAR_MONTH <= ' +
"'" + dbo.CONLastMonth_fn (getdate(), month(getdate())-1 ) +"'" +
' GROUP BY ID ORDER BY ID '
EXEC sp_executesql @SQLString
Is that something that can be done in Oracle in the same way?
Do you use another approach?
please advice
Edited by: user631364 on Oct 27, 2008 10:19 AM
Edited by: user631364 on Oct 27, 2008 10:21 AM
Edited by: user631364 on Oct 27, 2008 10:21 AM
Edited by: user631364 on Oct 27, 2008 10:22 AM
Edited by: user631364 on Oct 27, 2008 10:23 AM
Edited by: user631364 on Oct 27, 2008 10:23 AM
Edited by: user631364 on Oct 27, 2008 10:24 AM -
How to get the real SQL statement from a preparedstatement?
Hi,
I am trying to log the actual SQL sent to database by the preparedStatement. Since the original SQL I used to prepare the statement has a lot of "?" in it, after setting all the parameters in the preparedStatement, I want to get the final SQL statement executed. Is there a way to get it? Probably the SQL will depend on different drivers.
Thanks in advance.Thanks, changhsu. I tried the tracing technique. But it only prints out the original SQL statement sent to the preparedStatement. The following is part of the log file:
======================================================================
--------NetDirect JSQLConnect Version:2.2708--------
2002-04-10 14:23:54.818 (1) Connection attempt number 1 Connection ID:1 for host:perseus
2002-04-10 14:23:55.429 (1) JSQLConnect(2.2708) Trial license - expires on:Thu Apr 25 17:47:32 CDT 2002, unlimited connections
2002-04-10 14:23:55.449 (2) Connection allocated from pool ID:2
2002-04-10 14:23:55.72 (2) [Thread[Thread-6,5,main], IO:88cb4, Dbc:1346]] SELECT SHARED_DRIVES FROM EPM_PREFS WHERE PRODUCT='PE'
2002-04-10 14:23:57.913 (2) Connection closed and returned to connection pool ID:2
2002-04-10 14:23:58.193 (3) Connection attempt number 2 Connection ID:3 for host:perseus database:epm20 SQL6.5:false
2002-04-10 14:23:58.203 (3) [Thread[Thread-6,5,main], IO:88cb3, Dbc:1347]] use epm20 set quoted_identifier,ansi_null_dflt_on,ansi_padding on set textsize 2147483647 set transaction isolation level read committed set implicit_transactions off
2002-04-10 14:24:00.356 (4) Connection allocated from pool ID:4
2002-04-10 14:24:01.168 (4) [Not Loged In@localhost, IO:88cb2, Dbc:1347]] PreparedStatement::prepare stmt:SELECT PASSWD FROM RESOURCE_INFO WHERE USER_ID=? AND DELETE_FLG IS NULL
2002-04-10 14:24:01.448 (4) [Not Loged In@localhost, IO:88cb2, Dbc:1347]] RPC:sp_prepare
2002-04-10 14:24:01.488 (4) [Not Loged In@localhost, IO:88cb2, Dbc:1347]] RPC:sp_execute
=======================================================================
I did not try to trace in SQL Server 7. I will have to find out how to do that first.
Thanks again. -
How to get the correct size of the loaded swf file?
final public class main extends Sprite
public function main()
loaderInfo.addEventListener(Event.COMPLETE, _onLoadCompleted);
private function _onLoadCompleted(event: Event): void
var tw: int = stage.width;
var th: int = stage.height;
var tsw: int = stage.stageWidth;
var tsh: int = stage.stageHeight;
Above is my simple as3 project in flex builder 3.
My screen resolution is 1920*1080, when debugging, the swf is stretched to the full client area of the IE, but the stage.stageWidth is 500 and the stage.stageHeight is 375, both the stage.widht and stage.height are 0, who can tell me why and how to get the right size of the swf file, named the client area size of the IE in this situation?
Thanks very much!The HTML wrapper might resize the SWF later, so wait a frame and check stageWidth/stageHeight again.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui -
How to get the correct value from check box
hi guys,
here is a program to read data from IKPF.
with the user tick on the check box, the program will retrive
corresponding records based on the inventory counted (zstat) status.
however i don't get the correct output with the following selection.
Please advise where is going wrong. Thank you.
IF ph_ncnt = 'X'.
v_zstat1 = SPACE.
ENDIF.
IF ph_pcnt = 'X'.
v_zstat2 = 'A'.
ENDIF.
IF ph_acnt = 'X'.
v_zstat3 = 'X'.
ENDIF.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
b~menge into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and ( a~zstat = v_zstat3 OR
a~zstat = v_zstat2 OR
a~zstat = v_zstat1 )
and a~gjahr = p_gjahr.hi guys,
i'll use the following to get the desire result. This is a bit "stupid" but at least it gives me the correct result.
IF ph_ncnt = 'X'.
v_zstat1 = SPACE.
ENDIF.
IF ph_pcnt = 'X'.
v_zstat2 = 'A'.
ENDIF.
IF ph_acnt = 'X'.
v_zstat3 = 'X'.
ENDIF.
IF ph_ncnt = SPACE AND ph_pcnt = SPACE
AND ph_acnt = SPACE.
message I799(SA) with 'Which data to print?'.
stop.
ELSEIF ph_ncnt = 'X' AND ph_pcnt = 'X'
AND ph_acnt = 'X'.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
bmenge azstat into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and a~gjahr = p_gjahr.
ELSEIF ph_ncnt = 'X' AND ph_pcnt = 'X'.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
bmenge azstat into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and ( a~zstat = v_zstat1 OR
a~zstat = v_zstat2 )
and a~gjahr = p_gjahr.
ELSEIF ph_ncnt = 'X' AND ph_acnt = 'X'.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
bmenge azstat into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and ( a~zstat = v_zstat1 OR
a~zstat = v_zstat3 )
and a~gjahr = p_gjahr.
ELSEIF ph_pcnt = 'X' AND ph_acnt = 'X'.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
bmenge azstat into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and ( a~zstat = v_zstat2 OR
a~zstat = v_zstat3 )
and a~gjahr = p_gjahr.
ELSEIF ph_ncnt = 'X'.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
bmenge azstat into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and a~zstat = v_zstat1
and a~gjahr = p_gjahr.
ELSEIF ph_pcnt = 'X'.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
bmenge azstat into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and a~zstat = v_zstat2
and a~gjahr = p_gjahr.
ELSEIF ph_acnt = 'X'.
select awerks bmatnr bcharg aiblnr bzeili agjahr a~gidat
bmenge azstat into table t_data
from ikpf as a
inner join iseg as b
on aiblnr = biblnr
and agjahr = bgjahr
where a~werks in s_werks
and a~lgort in s_lgort
and a~gidat in s_gidat
and a~zldat in s_zldat
and a~zstat = v_zstat3
and a~gjahr = p_gjahr.
ENDIF. -
Cannot get the correct data type in Oracle JDBC
Dear ALL:
I used JDBC ResultSetMetaData to get the column data type for Oracle Database. I created a table including 2 columns AAA, which is NUMBER type, BBB which is FLOAT type.
However, I found a problem that either NUMBER or FLOAT data types are reported as NUMBER type in JDBC.
IN SQL 2000, it is okay. SMALLINT, INT, TINYINT, etc..can be reported correctly.
Can anybody tell me that what's wrong here? I will be very appreciated.hi,
i guess its a bug which is fixed with 10i.
Elango. -
How to get the Newly added fileds from Oracle to BW
Hi ,
We have created the view in the DB side and extracted the data to BW side. After that in the DB side they have added new filed. I want to extract the data for that filed also. But that filed is not displaying in the data source itself. We have deleted the sources system assignment to that particular info source and generated the data source in the source system side, and then also I an unable to get the newly added filed in the data source. We are extracting the data from the ORACLE data base. Please let me know the steps how to get the newly added filed in the data source.
Thanks,
VisuHi Yadav,
yes i have alreday created the info objects in the BW side. In the Oracle DB i can see the fileds in the data sources. Newly added filed is not displaying where as previous all fileds are displaying in the oracle DBside.
Thanks,
Visu -
How to get the available profile names in oracle database
How we can get the available profile names in oracle 11g
Hi;
It isnt to check from dictionary ?
select * from dictionary where table_name like '%PROFILE%'
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios -
How to get the exact sql developer which used for data migration?
Hi all,
Hope doing well,
Sir i seen a link for data migration that is : http://www.oracle.com/technetwork/developer-tools/sql-developer/sql-server-connection-viewlet-swf-089886.html
in this link when they are connecting to sql database so after clicking on new connection four tab is showing that is oracle, access, my sql, sql server.
i downloaded latest version of sql developer which version is: 3.02.09.30 when i opened this i am not getting those option.
and one more thing i am not getting miragation menu name in menu items.
please help me.
thanks and regardsHi,
To connect to non-Oracle databases from SQL*Developer youneed to download the relevant JDBC driver.
This is detailed in the documentation in the User Guide -
http://docs.oracle.com/cd/E35137_01/appdev.32/e35117.pdf
in the section -
Database: Third Party JDBC Drivers
The Third Party JDBC Drivers pane specifies drivers to be used for connections to third-party (non-Oracle) databases, such as IBM DB2, MySQL, Microsoft SQL Server, or Sybase Adaptive Server. (You do not need to add a driver for connections to Microsoft Access databases.) To add a driver, click Add Entry and select the path for the driver:
■For IBM DB2: the db2jcc.jar and db2jcc_license_cu.jar files, which are available from IBM
■For MySQL: a file with a name similar to mysql-connector-java-5.0.4-bin.jar, in a directory under the one into which you unzipped the download for the MySQL driver
■For Microsoft SQL Server or Sybase Adaptive Server: jtds-1.2.jar, which is included in the jtds-1.2-dist.zip download
■For Teradata: tdgssconfig.jar and terajdbc4.jar, which are included (along with a readme.txt file) in the TeraJDBC__indep_indep.12.00.00.110.zip or TeraJDBC__indep_indep.12.00.00.110.tar download
To find a specific third-party JDBC driver, see the appropriate website (for example, http://www.mysql.com for the MySQL Connector/J JDBC driver for MySQL, http://jtds.sourceforge.net/ for the jTDS driver for Microsoft SQL Server and Sybase Adaptive Server, or search at http://www.teradata.com/ for the JDBC driver for Teradata). For MySQL, use the MySQL 5.0 driver, not 5.1 or later, with SQL Developer release 1.5.
You must specify a third-party JDBC driver or install a driver using the Check for Updates feature before you can create a database connection to a third-party database of that associated type. (See the tabs for creating connections to third-party databases in the Create/Edit/Select Database Connection dialog box.)
Regards,
Mike -
How to get the correct client certificate used in the two way ssl
how to export the certificate in browser to the correct client certificate format needed by the WLSSSLAdaptor?
I can export the certificate in browser to p12 or pfx format, but how to retrieve the private key from it and convert to PKCS#8?
anyone did this before?
ThanksHi,
Use the event after_user_command.When the user clicks any other buttons in the toolbar,this event will be triggered after the processing and you can handle the sub-total for % columns here.
Regards,
Archna Raja -
How to get the correct length...removing appended extra ascii characters
I have a table fs_lg_partgroups, having the columns description,subgroupname.
I have a query like this..
select description,length(description) from fs_lg_partgroups where subgroupname='FORMULA226';
Then i got the output as
formula226 and the length is 42. Even though there are 10 characters only.
I came to know that some ascii characters are appended to description values, so it is showing the length like this.
But i don't know how to remove those ASCII characters from description column for all rows to get the exact length.
Please can u help me..If you have used char data type then use varchar2 datatype instead of char datatype for description column.
Learn about char and varchar2 datatypes here.
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96524/c13datyp.htm#7223 -
How to get the duplicate(exist) rows in Oracle?
Good morning,
I want to write the query to find the duplicate rows in the table.
SELECT ITEM, MFT_ITEM, MFT, DESC FROM ITEM
In the item table,if MFT_ITEM is coming more than or equal to twice ,it is a duplicate rows.MFT_ITEM is a unique.
ITEM MFT_ITEM MFT DESC
4647 4648 C6253 TOOLS
4647 4648 A0237 TOOLS
10PS 10PS A0027 KITS
10PS 11PS A0028 COVER
12LN 12LN A0034 NUTS
12LN 12LN A0035 NUTS
12LN 13LN A0036 SCREW
4310 4311 00462 POWER
4310 4311 31645 POWER
4310 4311 81205 POWER
I want the results like
ITEM MFT_ITEM MFT DESC
4647 4648 C6253 TOOLS
4647 4648 A0237 TOOLS
12LN 12LN A0034 NUTS
12LN 12LN A0035 NUTS
4310 4311 00462 POWER
4310 4311 31645 POWER
4310 4311 81205 POWER
Please replyNicole Thanks for your advise,
I try the below query , I am getting 0 rows.
With t As
Select 4647 ITEM,4648 MFG_ITEM, 'C6253' MFG ,'Tools' Descrip From dual Union All
Select 4647 ,4648 , 'A0237' ,'Tools' From dual Union All
Select 1088 ,1088 , 'A0027' ,'Kits' From dual Union All
Select 1088 ,1188 , 'A0028' ,'Covers' From dual Union All
Select 1245 ,1245 , 'A0034' ,'Nuts' From dual Union All
Select 1245 ,1245 , 'A0035' ,'Nuts' From dual Union All
Select 1245 ,1345 , 'A0036' ,'Screw' From dual Union All
Select 4310 ,4313 , 'A0046' ,'Power' From dual Union All
Select 4310 ,4313 , 'A3164' ,'Power' From dual Union All
Select 4310 ,4313 , 'A0462' ,'Power' From dual
)Select ITEM, MFG_ITEM,MFG,DESCRIP From
Select ITEM, MFG_ITEM,MFG,DESCRIP,
Count(MFG_ITEM) over (Partition By ITEM Order By ITEM) cnt
From t
) Where cnt > 1;
I should get the results like below
ITEM MFG_ITEM MFG DESCRIP
4647 4648 C6253 Tools
4647 4648 A0237 Tools
1245 1245 A0034 Nuts
1245 1245 A0035 Nuts
4310 4313 A0046 Power
4310 4313 A3164 Power
4310 4313 A0462 Power
Please reply -
Urgent Please regarding how to get the correct name from it,
I have asome input values say {a=1,b=2,c=3,d=4} in bag A .Now I need to display the name "a" in one column of the table and its value "1" in another column in a jTable so can some one help me out as I have to turn in the stuff tomorrow.
Thanks in advance.I have asome input values say {a=1,b=2,c=3,d=4} in
bag A .Now I need to display the name "a" in one
column of the table and its value "1" in another
column in a jTable so can some one help me out as I
have to turn in the stuff tomorrow.
Thanks in advance.Looks like you have spent too much time in the pub! The only way you will get this done is if someone does it for you. Since your specification is so poor (you don't say what form your bag takes) I suspect nobody will even attempt to do it for you.
Cut your losses. Go back to the pub and accept that you will fail this particular assignment.
P.S. Start the next assignment in plenty of time.
P.P.S. Marking something as 'urgent' is normally counter productive.
Maybe you are looking for
-
Skype India subscription problem
Dear Skype Team, I am using Skype India Subscription 2500 Mins last two months. First month it is working Fine. So, I recommended Skype to my friends. but from last months Skype subscription is not working fine. Every Two Minutes automatically discon
-
Can I define tables/views of another oracle database as data sources in DBI?
Hi! Assuming I created a dblink between an Oracle EBS database and another oracle database and I wish to create custom dashboards and reports in Oracle Daily Business Intelligence, will the tables/views from the another oracle database be allowed as
-
MAC Air and web sites will not display
I have a MAC Air and when i log on to the scholl web site "newfordtech.com the page is blank! I also tried Firefox and goggle chrome with the same affect!
-
How can i fix my bookkmarks? They dont show on the book in safari
They dont show in the bbokmark.
-
SP324099: Could not complete the operation. This is making me loose my patience.
As the tittle says error SP324099: Could not complete the operation. has been harassing me for the last couples of days while i had tried to renew my bloody license which requires me to sing in. I have started even loosing confidence in MS and I hav