How to get the customer fields view in CRM 2007?

HI Experts,
There is a tab in CRM 4.0 for customer fields(Generated using EEWB).
My question is how can we get these fields into WEB UI?
I didn't find the Component BTCUSTOMER_H in CRM 2007.
What might be the reason behind it?
Please share your views.
Thanks,
Adi.

Adi,
You actually got pointed to the wrong blog that I wrote. However if you read the following blog, it will show you how to do what you want to do:
/people/stephen.johannes/blog/2008/01/25/crm-40-to-52-customerh-fields
If you want to cheat, then apply latest support stack for CRM 2007 and the fields will be there. The section 1.13.5 in the SP02 release notes explains that the nodes are now available in CRM 2007 SP02.
Look at this thread on how to view the release notes:
SAP CRM 2007 SP02: DOCUMENTATION RELEASED
If you have any further questiosn let me know.
Take care,
Stephen

Similar Messages

How to get the customized value of a Report portlet in a page

Hi ,
I have a report portlet and it has a bind variable which users can customize when added to a page. There is a link to a Form page in the report , to which I need to pass the value of bind variable customized by the user. I used :
portal30.wwv_name_value.get_string( l_arg_names, l_arg_values, '<bind variable>');
function, it works ok when we run the report alone .But when we add the report as a portlet in page , it does not return any value. How do I get the customized field value in a page.
null

SAN.
I haven't tested but u can try with the below code...
OATableBean tableBean = ...;
OATableFooterBean tableFooterBean = tableBean.getFooter();
if (tableFooterBean != null)
OATotalRowBean totalRowBean = tableFooterBean.getTotal();
totalRowBean.getValue("Re-Total");
}Regards,
Gyan

Get the custom fields data at the time of save

Hi,
We have added few fields in the ICWC for the complaint screen.
At the time of save i am trigering a BADI.
I would like to check the data that is entered in those fields of complaint screen.
Is there any FM which can be used to get the data from the buffer ?
I have the header GUID available to me .
Thanks.
R

Hi,
Let me elaborate a bit.
Users would create the complaints in the ICWC.We have addeded few custom fields in the complaint screen.
CRMT_CUSTOMER_H_WRKT is extended with the custom fields.
At the save i am trigerring the Partner Determination BAdi.
Here i have the complaint guid at run time.
I would like to check the data entered in the custom field in the complaint screen. Based on this i would like to determine one more partner.
My question is how can i get the custom field data in the complaint screen in this BAdi.
The FM: CRM_ORDER_READ is not returning this data.Is there any FM to get this ?
Thanks.
R.

How do you get the custom fields added to a address book to show up on Pages 09 when merging fields?

I created some custom fields in the address book and want to get them merged into a Pages 09 document. When using the merge fields feature in Pages, only the standard fields are displayed. I am looking for a way to have the custom fields from the address book inserted into the document.

I believe you will find them if you go to table - unhide all columns. When you drag and drop card(s) into pages, it automatically shows default fields. The others are there but hidden. I hope this works for you!

How to get the custom integrator in Manage Document Links

Hi All,
My requirement is "Creating Word Documents Using Web ADI", I am following the document
Oracle® Human Resources Management Systems
Configuring, Reporting, and System Administration Guide
Release 12.1
Part No. E13509-02
From page no. 194.In that section, No.8. Use the Manage Layout Document Links page to create a link between the
integrator and layout and the Word template.
See: Creating Links between Template Letters and Layouts, page 2-33
2-33>>
Select Manage Document Links from the Web ADI menu.
But when I click on the "Manage Document Links", I couldn't see my custom integrator to associate my word document with my integrator.
I could see only the standard integrators.
How to get my custom integrator in "Manage Document Links". I could see my custom integrator in define layout but not in this page.
Thanks.
With Regards,
Kali.

Hussein,
Thanks for your reply.
I followed the
Note 360105.1 -Understanding and Using Web ADI in Oracle HRMS, and the section "Letters",
I could follow all the steps, except the following,
The reason is, when I click on Manage Documents Links, I am not getting my newly created integrator.
If I link a standard integrator "HR People Details" to my document, that is opening properly.
But I am not able to link my document with my integrator(which is based on my view).
c. Now link the template letter to the Letter Integrator and Layout.
If not already done so, Add the function WebADI Manage Document Links to your Web ADI menu, and give it a prompt of Link Document.
Select Link Document option , and Web ADI Mail Merge page displays. Choose your Letter Integrator. Link it to the Layout, and a list of template documents uploaded to the database is displayed. Select the template letter to be linked with the layout.
Thanks.
With Regards,
Kali.

How to get the customized page's xml version ?

Hi All,
I have created some fields (of style 'MessageChoice', 'MessageLovInput') through personalization in a page and after that i navigated to the middle-tier where our MDS repository holding all the page's source file (in form of XXXXPG.xml) to get the updated version of the same page in xml version.
But i couldn't get the latest version of page's XML file instead i found the old standard file only.
Please help me in getting the file and guide me the path if it got stored somewhere in the architecture.
Thank You,
Thiyagarajan

Dear Anoop,
Thanks for your immediate response.
Could you please pour your ideas how to store the custom personalizations in Unix box through Functional Administrator responsibility ?
And one more question is as you said it will be stored in the form of xml but i have searched the page in the middle tier where it(standard one) got stored, but unable to find any one. How to find the xml file after doing the personalizations and in which path ?
Waiting for your reply.
Thank You,
Thiyagarajan

How to update the Customer field value of PO Item under the Delivery Address Tab?

Hi Friends,
i tried to update the Customer field Using Bapi_PO_change.I passed the PO Order no,POADDRDELIVERY data with Item no,Adrees no,Customer no.But i am getting no data changed message from return table.I attached the screen shots.So please suggest me the helpful information for resoving this issue.
Thanks,
Dinesh

Thank you friends,
My Problem was resolved.In my case i have passed the customer value in BAPI_PO_CHANGE POITEM Table with updated customer value.
Thanks,
Dinesh

How to get the value field of the return parameters for an action step in teststand sequence file programatically using c#

                Sequence mySequence = myEngine.NewSequence();
                mySequence.Name = "myAction";
                //Create new step of type Action and set Name
                Step mystep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname, StepTypes.StepType_Action);
                mystep.Name = "GetStringObject";
                //Obtain the code module from the step
                DotNetModule myModule = mystep.Module as DotNetModule;
                //Set properties of the module
                myModule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File, @"C:\Documents and Settings\My Documents\Visual Studio 2005\Projects\HelperClass\HelperClass\bin\Debug\HelperClass.dll");
                myModule.ClassName = "Class1";
                myModule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
                myModule.MemberName = "StringObject";
                mySequence.InsertStep(mystep, 0, StepGroups.StepGroup_Setup);
                mySequence.Locals.NewSubProperty("StringObject", PropertyValueTypes.PropValType_Reference, false, "", 0);
                DotNetParameterDirections reference = mySequence.Locals as DotNetParameterDirections;
                mySequence.Locals.GetPropertyObject("StringObject", 0);
                myModule.ClassReference = "Locals.StringObject";
                myModule.LoadPrototypeFromMetadataToken(385875969, 0);
After this I am not able to proceed.herewith attached documents contain screenshot of teststand file marked red is to be solved. How to define the value field of the return parameters?
Attachments:
HelperClass.cs ‏1 KB
ex1.gif ‏2305 KB

Please see my answer to your question on page two of the following forum thread:
Programmatically generating DotNet Steps in TestStand
Manooch H.
National Instruments

How to get the coloumns (fields) width in crystal report

hi,
how to get the coloumns width, date(get and set) and page size in crystal report using ras sdk .
thanks

Thanks

How to define the customer field in SC as mandatory

Hi all,
Could someone help me to define the customer field as
mandatory in the shopping cart?
Thank you a lot.
Best regards,
Danijela

Hi Danijela,
you could implement the BBP_DOC_CHECK_BADI and check if the customer field is filled. If not, you can issue an error message (Type 'E') in the BAdI. This message will be visible in the browser. The user will only be able to order the shopping cart when this error message is gone.
Best Regards,
Olaf

How to get the cursor field on custom cotrol area

Hi all,
I crated a custom contorol area on Dynpro screen.
I'd like to get the cursor when i set the cursor on custom control area.
I tried 'GET CURSOR FIELD w_xxx AREA w_yyy', but I can't get that.
I don't know how.
If you know that, please let me know.
Regards.
Rie.

You have to use set_focus method of CL_GUI_CUSTOM_CONTAINER.
CALL METHOD me->txt_container->set_focus
EXPORTING
control = me->txt_editor.

How to get only custom fields from a SharePoint 2010 list?

I am working with the Client Side Object Model. In a console application I am retrieving all fields from a custom list. The problem is the Clientcontext fetches me a bunch of internal fields I do not want to be included. Also this causes some of the fields
to appear more than once.
string siteURL = "http:XYZ";
ClientContext context = new ClientContext(siteURL);
Web oWebSite = context.Web;
context.Load(oWebSite);
context.ExecuteQuery();
//Get the list by title
List produktKatalogListe = spLists.GetByTitle("Produktkatalog");
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml = "<View/>";
ListItemCollection listItems = produktKatalogListe.GetItems(camlQuery);
context.Load(produktKatalogListe);
context.Load(listItems);
context.Load(produktKatalogListe.Fields);
context.ExecuteQuery();
foreach(Field field in produktKatalogListe.Fields)
Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
Is there a way to print only custom fields? This would mean omitting fields like
internalID, GUID...
I tried the following:
if(!field.Hidden)
Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
Unfortunately this not only does not solve the issue but is also not a very good solution for the case I do want to display custom but hidden fields.
Algorithmen und Datenstrukturen in C#:
TechNet Wiki

The following approach seems to solve the issue. Instead for checking if the field is not
Hidden I checked whether it is not FromBaseType.
if(!field.FromBaseType)
Console.WriteLine("{0} - {1} - {2} - {3} - {4}",field.Title,field.InternalName,field.Hidden,field.CanBeDeleted,field.FieldTypeKind);
Algorithmen und Datenstrukturen in C#:
TechNet Wiki

How to get the custom program generated in Background

Dear Freinds,
I have written a below code in my submit program ( zreport) .
REPORT ZHRRPCPRRU0_SUBMIT NO STANDARD PAGE HEADING MESSAGE-ID zhr_msg.
SUBMIT RPTQTA00 VIA SELECTION-SCREEN
WITH pnpbegda = sy-datum
WITH pnpendda = lv_date
with pnppernr = '99007057'.
As per your logic i have used the submit program and i am able to default the dates in the Standard program RPTQTA00 , that is perfectly correct . Now if run the standard report it is giivng me the ouput ..so the foreground concept is working correctly.
Now if iam scheduling the Z report of the custom report (z program) where iam calling the submit program
it is just scheduling and further when i look at the sm37 i can see the job getting finished . However , i dont find any spool because the standard report has not been executed , with my custom report (using the logic with submit program above in zprogram ) i am calling the standard program (RPTQTA00).
so could you please let me know how the standard program will execute and get the spool genereated? in the case of background
because when i have executed only the standard report in background i can see that it is being exceuted spool as well, however when iam calling from custom program no spool is created because my custom program only submiting the standard report and it is not executing the standard report in the case of backround ...because when iam running the custom program in the Foreground it is calling the standard program and getting the values defaulted based on the parameters which i passed , so it gets defaulted later iam running the standard program manually .
So please could you let me know how will the standard program also gets genereated in the backgroung along with my custom report.
Thanks in advance
regards
madhuri,

Hi Can you try the following?
Hope this helps... (Taken from help)
Example
Scheduling a submitable program as a background task with the number number in a background request name. After scheduling, the background task is completed by function module JOB_CLOSE and released immediately.
DATA: number TYPE tbtcjob-jobcount,
      name TYPE tbtcjob-jobname VALUE 'JOB_TEST',
      print_parameters TYPE pri_params.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
    jobname          = name
IMPORTING
    jobcount         = number
EXCEPTIONS
    cant_create_job = 1
    invalid_job_data = 2
    jobname_missing = 3
    OTHERS           = 4.
IF sy-subrc = 0.
SUBMIT submitable TO SAP-SPOOL
                    SPOOL PARAMETERS print_parameters
                    WITHOUT SPOOL DYNPRO
                    VIA JOB name NUMBER number
                    AND RETURN.
IF sy-subrc = 0.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
        jobcount             = number
        jobname              = name
        strtimmed            = 'X'
      EXCEPTIONS
        cant_start_immediate = 1
        invalid_startdate    = 2
        jobname_missing      = 3
        job_close_failed     = 4
        job_nosteps          = 5
        job_notex            = 6
        lock_failed          = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDIF.

How to get the text field in the header for only first page of the report

Hi,
I am developing reports in BI Publisher Enterprise where i am facing problem i.e., i have to get some text field in header,for only first page in the result but it is displaying in all the other pages of the report in result.So,please if you have any idea of how to solve it, please reply.It is required as early as possible.
Thanks in Advance

Invalid path? What are you doing? Writing the report output to an invalid directory?
Where are your terms and conditions? It would be very easy just to put them in a database table and select them in your report query.

How to get the extended field of an Extented Standard BO in Std Byd reports

Hi ,
Requirement :
Reflecting an extented field in of an extented BO in all the reports using this BO, or datasource based of this BO.
Explanation :
Suppose I have extented "customer" BO in my solution. the extention field is named as 'customer-ext1 ' having datatype 'text' (say).
Now I need to show this extented field 'customer-ext1' in all the Std Byd reports using / based on the customer BO.
Is this possible thru Byd Studio ( vers 3.0 / 2.6 ) ?
Can anyone help me out on this ?
I have found a statement from some where that -
" A key user can add an extension field to a data source that is based on the same business context as the extension field. This field can be then added to any reports based on the data source. This needs only key user adaptation."
I did not get the higlighted text in the above statement , can anyone help me figure this out ?

See as a test purpose,
I have extended "CustomerInvoice BO " with element "Extension1 " with datatype as test;
Now The solution's Key User is enabled.
I guess the Key user is my technical ID right , with which I enabled the Key user of my solution ? or is the Id which had created the solution ?
Post this, when I loggin to the system from web browzer, then go to adapt mode, a yellow bar strip named "Adaption Mode " appears..
Now what to do ?
Where shall i go and add the extended fields ?
can u pls expond the procedure... )
Thanks
Milin

How to get the customer fields view in CRM 2007?

Similar Messages

Maybe you are looking for