How to get the extended field of an Extented Standard BO in Std Byd reports

Hi ,
Requirement :
Reflecting an extented field in of an extented BO in all the reports using this BO, or datasource based of this BO.
Explanation :
Suppose I have extented "customer" BO in my solution. the extention field is named as 'customer-ext1 ' having datatype 'text' (say).
Now I need to show this extented field 'customer-ext1' in all the Std Byd reports using / based on the customer BO.
Is this possible thru Byd Studio ( vers 3.0 / 2.6 ) ?
Can anyone help me out on this ?
I have found a statement from some where that -
" A key user can add an extension field to a data source that is based on the same business context as the extension field. This field can be then added to any reports based on the data source. This needs only key user adaptation."
I did not get the higlighted text in the above statement , can anyone help me figure this out ?

See as a test purpose,
I have extended "CustomerInvoice BO " with element "Extension1 " with datatype as test;
Now The solution's Key User is enabled.
I guess the Key user is my technical ID right , with which I enabled the Key user of my solution ? or is the Id which had created the solution ?
Post this, when I loggin to the system from web browzer, then go to adapt mode, a yellow bar strip named "Adaption Mode " appears..
Now what to do ?
Where shall i go and add the extended fields ?
can u pls expond the procedure... )
Thanks
Milin

Similar Messages

How to get the transport request for a particular standard text?

Hi,
i want to know, how we get the transport request which associated for standard text.
Please note already the standard text is assigned to the TR using RSTXTRAN program.
i have a std text. i want to find the related TR for that!
rds,
Siva.

Refer the link. It might tellsa about attaching to transport request but using the way you can find also -
Re: How To Transport STANDARD TEXTS??
Regards,
Amit
Reward all helpful replies

How to get the value field of the return parameters for an action step in teststand sequence file programatically using c#

                Sequence mySequence = myEngine.NewSequence();
                mySequence.Name = "myAction";
                //Create new step of type Action and set Name
                Step mystep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname, StepTypes.StepType_Action);
                mystep.Name = "GetStringObject";
                //Obtain the code module from the step
                DotNetModule myModule = mystep.Module as DotNetModule;
                //Set properties of the module
                myModule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File, @"C:\Documents and Settings\My Documents\Visual Studio 2005\Projects\HelperClass\HelperClass\bin\Debug\HelperClass.dll");
                myModule.ClassName = "Class1";
                myModule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
                myModule.MemberName = "StringObject";
                mySequence.InsertStep(mystep, 0, StepGroups.StepGroup_Setup);
                mySequence.Locals.NewSubProperty("StringObject", PropertyValueTypes.PropValType_Reference, false, "", 0);
                DotNetParameterDirections reference = mySequence.Locals as DotNetParameterDirections;
                mySequence.Locals.GetPropertyObject("StringObject", 0);
                myModule.ClassReference = "Locals.StringObject";
                myModule.LoadPrototypeFromMetadataToken(385875969, 0);
After this I am not able to proceed.herewith attached documents contain screenshot of teststand file marked red is to be solved. How to define the value field of the return parameters?
Attachments:
HelperClass.cs ‏1 KB
ex1.gif ‏2305 KB

Please see my answer to your question on page two of the following forum thread:
Programmatically generating DotNet Steps in TestStand
Manooch H.
National Instruments

How to get the coloumns (fields) width in crystal report

hi,
how to get the coloumns width, date(get and set) and page size in crystal report using ras sdk .
thanks

Thanks

How to get the text field in the header for only first page of the report

Hi,
I am developing reports in BI Publisher Enterprise where i am facing problem i.e., i have to get some text field in header,for only first page in the result but it is displaying in all the other pages of the report in result.So,please if you have any idea of how to solve it, please reply.It is required as early as possible.
Thanks in Advance

Invalid path? What are you doing? Writing the report output to an invalid directory?
Where are your terms and conditions? It would be very easy just to put them in a database table and select them in your report query.

How to get the search field with API UCM for a specific UCM Profil

We have UCM 10g
For the checkIn we have for exemple the URL : http://xp-ucm1.oth.prs/idc/idcplg?IdcService=CHECKIN_NEW_FORM&dpTriggerValue=1&dpDisplayLabel=Codification%201&IsSoap=1
To obtain all the field for the checkIn is very simple with this service(IdcService=CHECKIN_NEW_FORM) and RIDC, but for search we don't find the idc service ?
<SOAP-ENV:Envelope>
−
<SOAP-ENV:Body>
−
<idc:service IdcService="CHECKIN_NEW_FORM">
−
<idc:document dRevLabel="1" dUser="sysadmin" dDocName="" dDocTitle="">
<idc:field name="xClbraUserList:isExcluded">1</idc:field>
<idc:field name="xsgti_top_rule:isSetDefault">1</idc:field>
<idc:field name="xlist1:isExcluded">1</idc:field>
<idc:field name="xsgti_g_ll_niv1_1:isExcluded">1</idc:field>
<idc:field name="xsgti_chrono_soc"/>
<idc:field name="xsgti_g_entier4:isExcluded">1</idc:field>
any ideas

Hi,
In fact, I don't want to send parameters to the search service but to get the fields to display an advanced search form of my own.
Some rules and profiles filters the amount of fields availables and having a service that can do this filtering for me would be very useful.
The check-in service do this for a trigger value (profile), but I can't find how UCM uses services to display the search form with the right fields depending on the rules and rights of the user.
When I call a search form, UCM calls a service : http://xxx.xxx.xxx.xxx:xx/idc/idcplg?IdcService=GET_DOC_PAGE&Action=GetTemplatePage&Page=STANDARD_QUERY_PAGE&dpTriggerValue=xxx&dpDisplayLabel=xxx
But with &IsSoap=1, the values returned are not good, some fields are missing, the field captions are not right... I guess UCM calls sub-services but which ones ?
Thanks :)

How to get the customer fields view in CRM 2007?

HI Experts,
There is a tab in CRM 4.0 for customer fields(Generated using EEWB).
My question is how can we get these fields into WEB UI?
I didn't find the Component BTCUSTOMER_H in CRM 2007.
What might be the reason behind it?
Please share your views.
Thanks,
Adi.

Adi,
You actually got pointed to the wrong blog that I wrote. However if you read the following blog, it will show you how to do what you want to do:
/people/stephen.johannes/blog/2008/01/25/crm-40-to-52-customerh-fields
If you want to cheat, then apply latest support stack for CRM 2007 and the fields will be there. The section 1.13.5 in the SP02 release notes explains that the nodes are now available in CRM 2007 SP02.
Look at this thread on how to view the release notes:
SAP CRM 2007 SP02: DOCUMENTATION RELEASED
If you have any further questiosn let me know.
Take care,
Stephen

How to get the cursor field on custom cotrol area

Hi all,
I crated a custom contorol area on Dynpro screen.
I'd like to get the cursor when i set the cursor on custom control area.
I tried 'GET CURSOR FIELD w_xxx AREA w_yyy', but I can't get that.
I don't know how.
If you know that, please let me know.
Regards.
Rie.

You have to use set_focus method of CL_GUI_CUSTOM_CONTAINER.
CALL METHOD me->txt_container->set_focus
EXPORTING
control = me->txt_editor.

How to get the layout field setting from the oo ALV

Hi:
    My user want me to save the data to the email attachment when he change the alv layout.
    For example there are 10 fields in a alv report ,and the user change the layout setting to 5 fields,I need to know which field is he need first, how can I get it ?
    Pls help me ,thanks a lot !

Hello Jerry
When you call method go_grid->GET_FRONTEND_FIELDCATALOG you can retrieve the current layout of the ALV list.
LVC_S_FCAT-COL_POS = Position of column
LVC_S_FCAT-NO_OUT = 'X' = not visible
LVC_S_FCAT-TECH = 'X' = technical column, neither visible nor selectable
Regards
Uwe

How to get the following field values?

I have an invoice number. How can I find out (from which tables and fields) the ship date, vessel, port of loading, port of discharge. I think it is VTTK table and fields are datbg, text1, add01 and add02, but if so what should I give in VTTK table to get these values?
Please give your input.
I appreciate and points assured for helpful answers.
Krishen

Hi Krishen,
For ship date you can find the data in LIKP table itself. All other details like vessel, port of laoding and port of discharge will be found at the shipping point level.
Select the delivery number in VL03n and from the menu GOTOITEMSHIPMENT you will find the shipping point details.
Cheers
VJ

How to get the value from the readonly field?????

Hi All,
I have a readonly field in JSF. in action class i want to get the value of that field.
How to get the readonly field value???
i am getting null if the field is readonly.
i am getting value if the field is not readonly.

I might have a problem similar to yours. Refer to the post I made entitled "Readonly and Disabled Fields Losing State Between Submits".

BDC-How to get the value of the screen field

Hi All,
I am facing a problem while writing the BDC code for the XK02 transaction.
Recording:
We have recorded like this :after giving the values in the initial screen(vendor no and purchase group and selecting the purchasing data check box) and enter into the second screen and then click on alternative data icon.There we ll have set of plants we have to check auto ordering (by selecting the plant and click purchasing icon)for the plants which are in the given file.
Problem:
Suppose there are five plants(like 1,2,3,4,5) for a particular vendor but we are having only three plants in the file for which auto ordering check has to be done.The problem is that its doing auto ordering check for the first three plants(1,2,3) in the transaction.But in the file we are having Plants like (1,3,5).How to get the screen field value directly or is there any other way to resolve the problem?

Dear Raja,
You cannot get hold of screen values while running through the BDC Operation.
Only way you can get the value --> populating an Internal Table from the Database Table.
Regards,
Abir
Don't forget to award Points *

How to get the field type from the database dictionary in screen painter

hi,
I wanted to create a new input field that input field should have the data element from the structure that i have created. How to get the data field type from the database dictionary in the screen painter

hi
good
there is two kinds of evernt
PROCESS ON HELP-REQUEST
PROCESS ON VALUE-REQUEST.
which ll help you to give two types of help one is f1 help and another one is f4 help
go through this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/47/e07f622b9911d2954f0000e8353423/content.htm
thanks
mrutyun

How to get the value from Advanced table

Hi,
In the Advanced table have 2 LOV fields, I need LOV field value dynamically in the controller to validate the save button, if iam not selected any value in lov save button will not allow to save the data. In the table i am using 'Add another row'. How to get the lov field value in the process form request??? and how to do this requirement
Thanks
Naresh

1. You can specify required property on LOV field to "yes". For events where you wish to disable the client side validations, set the property disable client side validation to "true".
2. If above behavior is not what you are looking for, then you need to handle in AM and not CO.
a. Call an AM method from CO.
b. In that AM method, get handle of VO.
c. Iterate the VO Rows and check for your validation rules.
-Prince
http://www.princekapoor82.blogspot.com

HOW TO GET THE SELECTED VALUE IN A ROW FROM ONE VIEW TO ANOTHER VIEW?

hi all,
I have a small issue.
i have created two views.In the table of the first view i'm selecting a row and pressing the button it will move to next view.
i am adding some fields manually in the table of the second view and pressing the save button.Here all the values should get updated corresponding to the field which i have selected in the first view.
I want to know how to get the particular field in the selected row from one view to another view.
Kindly help me.

Hi,
Any data sharing accross views can be achiveved by defining CONTEXT data in COMPONENT CONTROLLER and mapping it to the CONTEXT of all the views. Follow the below steps.
1. Define a CONTEXT NODE in component controller
2. Define same CONTEXT NODE in all the views where this has to be accessed & changed.
3. Go to CONTEXT NODE of each view, right click on the node and choose DEFINE MAPPING.
This is how you map CONTEXT NODE and same can be accessed/changed from any VIEW or even from COMPONENT CONTROLLER. Any change happens at one VIEW will be automatically available in others.
Check the below link for more info regarding same.
[http://help.sap.com/saphelp_nw04s/helpdata/EN/48/444941db42f423e10000000a155106/content.htm]
Regards,
Manne.

How to get the extended field of an Extented Standard BO in Std Byd reports

Similar Messages

Maybe you are looking for