How to get the database's current time?

Hello,
is there a select statement to retrieve the system time of MaxDB/SAPDB similar to the SQL Server statement "SELECT GETUTCDATE()"?
Thanks,
Christian

In MaxDB, you can do, e.g., a
SELECT UTCDATE FROM DUAL
to select the current UTC timestamp at the server. You
may of course also use the UTCDATE statement in all
places where you could use a time stamp literal or
parameter.

Similar Messages

  • How to get the footage's current frame number in expression?

    There are 2 layers.One is text layer,one is sequence layer.
    Footage has begun from the 20th frame.
    Therefore, the number of composition's current frame number and footage's frame number has shifted.
    I want to show footage's frame number in text layer . not composition's frame number.
    How to get the footage's current frame number in expression?
    Tatsuya

    >Footage has begun from the 20th frame.
    Do you mean that the footage layer has been trimmed (so that the start of the footage lines up with the start of the comp, but the first 19 frames are not visible), or moved to the left (so that frame 20 lines up with the comp's frame 0), or that the sequence actually begins with the 20th frame (at frame 0 of the comp), or something else?
    Are the frame rates of the comp and the footage the same?
    Dan

  • How to get the Database type from weblogic Db connection

    I want to use database version control in my application . that means different database type use different Sql Statement. Such as in weblogic7.0 if I create SqlServer JDBC pool then I will use some special Sqlserver sql Statement . such as some join statement. If I create Oralce JDBC pool then I have to use different Sql statement . because these two database support different Sql statement.
    What my question is how to get the database type from the connection.

    For a normal jdbc driver you can use
    Connection.getMetaData()
    To get the meta data, in particular the getDatabase...() methods.
    That might or might not work.
    However, at the very least in the server you have access to the weblogic properties so you can parse the pool property to figure it out.

  • How to get the number of current active external modes?

    hi all,
    I need to get the number of currently active external modes. This can be done by calling function THUSRINFO. But this only works propperly, if you are logged on only once. If you are logged on more than one time then the function returns several entries in the parameter USR_TABLE. The entries mainly differ in the first parameter TID (type UTID, INT4) "terminal-identification" but how can I know which is the valid one for my current session. Functions TERMINAL_ID_GET, SPH_TERMINAL_IDENTIFY and SPH_TERMINAL_ID_GET dont work.
    Or is there another way to get the number of active external sessions?
    Thanks in advance,
    Michael

    Hi,
    tables: usr02, usr41.
    data: OPCODE_MODE_COUNT(1) TYPE X VALUE 3,
          modes like sy-index,
          u_MODES LIKE MODES.
    select * from usr02.
      select * from usr41 where BNAME = usr02-bname.
        CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE_MODE_COUNT
          ID 'TID' FIELD usr41-TERMID
          ID 'MODES' FIELD MODES.
        IF SY-SUBRC = 0.
          u_MODES = u_MODES + MODES.
        ENDIF.
      endselect.
      if sy-subrc = 0.
        write:/ usr02-bname, u_MODES.
      endif.
      clear u_modes.
    endselect.

  • How to get the guid of currently opened page programatically

    Hi,
    Can any one of you please let me know how to get the guid of a page at database level which is opened currently?
    The requirement is I need to grab the url of a page which is currently opened by the user.
    Is there any way to get it from accessing the tables like wwv_things or wwpob_page$.
    Please suggest me how to get it.
    Thanks,
    Ravi.

    Hi Ravi,
    You may wanna explore the two API's (wwsbr_all_folders and wwsbr_all_items) and make a bridge to get the name of the portlets that appear on the page.
    something of the following nature should be enough to take you where you want to go. here c.name is the GUID of the item you are looking for.
    SELECT DISTINCT c.display_name,c.name,c.updatedate
    FROM portal.wwsbr_all_folders a, portal.wwsbr_all_items c
    WHERE a.LANGUAGE = 'us'
    AND a.id = c.folder_id
    AND a.caid = c.caid
    AND c.itemtype = 'baseportletinstance'
    AND a.Name LIKE 'MY_PAGE_NAME'
    order by 3 desc
    this will work in the portal but not in the sqlplus or any querying tool. for that purpose, it will work once you establish the context of user.
    hope that helps!
    AMN

  • How to get the client date and time ?

    Dear Sirs...
    Using jdeveloper 10.1.2.0
    How can i get the client date and time using the HttpServletRequest ?
    thanks for any help in advance
    best regards

    If your code is running on the client pc you can just create a new instance of the java.util.Date class. That class automatically defaults to the current time of the client machine. Otherwise if you're running the code on the server, you could insert/post the client date/time by adding its string representation as a parameter to the HTTP request object.
    Ronald

  • How to get the Asset's current step under a specific workflow process via API?

    Everyone,
    Is there a way to get the asset's current step for a specific workflow process by the WebCenter Sites API? We are showing out the asset created within the WebCenter Sites in another application via its API. We would like some actions get to be done once determined assets went into a specific step of a workflow process. Any suggestions are welcomed.
    Regards!

    Here is some information from the FDK Programmer's guide page 115:
    IMPORTANT: A valid text range can span multiple paragraphs, subcolumns, or text frames.
    It cant span multiple flows, footnotes, table cells, or text lines.
    It is possible for a document to have no text selection or insertion point at all. This can occur in
    the following circumstances:
    ● One or more graphic objects in the document are selected
    ● One or more entire table cells in the document are selected
    ● There is no selection of any type in the document
    So, I did select one or more entire table cells in the document in my first test. It's logical that the result was not like expected.
    But selecting one or more entire table cells is a crucial requirement for my plugin, is there anyway to get things straight?
    Simply put, I want to enable users to select one or more table cells in the document, and I want to get the object handles of the first cell and the last cell through Framemaker API calls. How?
    Many thanks in advance!
    Best Regards,
    Ellen N. Zhao

  • How to get the database owner name in T-SQL script

    Hello, All!
    I want to get the database ower name (in format DOMAIN\user) by through T-SQL script. But SELECT * FROM sys.databases returns only owner_sid.
    Please show me a way - how to get the owner name, if you have only owner_sid. Or, may be, somebody know another way ?
    Andy Mishechkin

    SELECT suser_sname( owner_sid ), * FROM sys.databases
    http://www.t-sql.ru

  • How to get the number and response time of HTTP request through Weblogic?

    hi,
    does anybody know how to get the HTTP request information through Weblogic server, such as the number of HTTP request in 1 min and the average response time of request in 5 mins ?
    Or is there anyway i can do it through monitoring and get these data then? If so, please help tell me.
    Thanks in advance
    BTW, we don't have the 3rd-party monitoring tool here.

    Hi,
    tables: usr02, usr41.
    data: OPCODE_MODE_COUNT(1) TYPE X VALUE 3,
          modes like sy-index,
          u_MODES LIKE MODES.
    select * from usr02.
      select * from usr41 where BNAME = usr02-bname.
        CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE_MODE_COUNT
          ID 'TID' FIELD usr41-TERMID
          ID 'MODES' FIELD MODES.
        IF SY-SUBRC = 0.
          u_MODES = u_MODES + MODES.
        ENDIF.
      endselect.
      if sy-subrc = 0.
        write:/ usr02-bname, u_MODES.
      endif.
      clear u_modes.
    endselect.

  • How to get the name of current monitor?

    I have a script which is used to get some application data. The script take parameters such as "LOB" so it can query data for different department. When it found something, it raise an event in event log.
    Therefore this script is used by several different monitors. Each monitor calls the script by passing different parameters. To better understand the event was created by which monitor, I want the script can get the name of monitor which calling it and they
    list it in the event log too. 
    Currently, I am passing $MPElement$ as one script parameter so I can get the monitor's GUID. Then get the name by running powershell command. Is there an easier way to get the monitor name? Thanks!

    The best way to do this is to put the monitor name as a property bag in the script and pass that to your event details. Otherwise, we're looking at querying the database each time the monitor generates an event, and this is overhead that is really not
    necessary. The other option, which is just even worse in terms of performance, is to use powershell to query the SDK for the monitor name. Both of these options are not going to be a good solution, because now you need to implement action accounts that can
    either query the database or the sdk.
    Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

  • How to get the database value without submitting the jsp page

    Hi,
    I have a form that has many fields (textbox/listbox). when user enter/change a value in the first textbox, I need to pass this value to the database to check whether it exist and get the other values to be displayed to other fields in that form (i cannot get the javascript value to be pass to jsp without reload/refresh/submit. But, I need to get the user entered value, so I thought of hidden popup, iframe, etc but not sure how I could apply and which best suit this case). If I submit the page then I can easily get the value thru 'request.getParameter("fieldname") but cannot use this because I cannot submit the page.
    Pls help and possible provide me with the sample coding
    Thanks

    The best way for you is surely AJAX. But there is another way to stay compatible with older browsers:
    Since the default method a browser supposed to get data is refresh, there is nothing unnatural in it. Browsers are optimized to refreshes, like cached images, etc..
    So for these step-by-step things, you need to roll forward your data from page to page, and make the page to respond according the data it actually have. This can be easily achived with type="hidden" input fields in a form: the user will send you back all the data. Optionally you may show him the data you already have as visible text too.
    A more generalised way to "pull" the data: you make a whole page you include every time you need an additional data. This page will receive 2 parameters from where you've included it. This 2 parameters are each indexed arrays with the datas you have to pull in (here the default value), and you need to push forward. Optionally there is a 3rd parameter, the url it have to return (as the form's action property).
    And for them who now say that it would me more culture way to store this data in the session: Beware! Common mistake: Sessions are to store data about the user itself, not the datas for the next page! You never know what will be the next page! The user click some backward button and refresh button, and depending on your script, it may go stupid! Ok, not all the codes, but I've seen some. It's ok to store a sent file (fx. image) on the server, but always think the evil refresh and back buttons!

  • URGENT: how to get the database error message into application?

    Hi, pls give some idea:
    For example, the database is MS Access. When insertion failed, the getMessage() method of SQLException will print "General error", while the log file created by ODBC will be "[MICROSOFT][ODBC DRIVER]column ID no found in student table"(...just a example).
    So, how to get this message in our application?

    instead of using the getMessage method, have you tried something like this:
             try {
             } catch (Throwable t1) {
                System.out.println(t1.toString());
             }If that still doesn't work, you can always redirect the log entries into a textarea but then everything that appears in the log file will be redirected!
    ;o)
    V.V.

  • How to get the Database Driver list

    Hi... I want to know that particular database driver is registered or not in windows.. how can i get this info.
    And I want to get the list of all the database drivers registered in windows..
    Can anybody help me..

    dcminter wrote:
    Well, seeing as how none of them are registered, until your program registers them, simply keep a list.That's not actually true. If the JAR is in the classpath then a JDBC4 driver will use the service provider hooks to register itself.
    When first loaded. Which is unlikely to happen until you explicitly load it.
    Being on the classpath doesn't mean the JVM will actually do anything with a class. Either an application will have to initiate some action or it will have to be initiated by the manifest of the jar (and I'm not sure that will actually do anything until a class from that jar is actually required to be loaded).

  • How to get the Database table behind condition records

    Hello All
    In transaction VK13, after giving condition type, I can select sales document.
    For a given Sales Document number, there are several conditions.
    How can i extract all the conditions for a given sales document?
    I am coding a report for this. In which database table can i get the condition between sales document number & different conditions attached to it?
    On the screen, i can see that the fields are from the structure KOMG. What is the corresponding table?
    Thanks
    Chandra Sekhar

    Hi,
    corersponding tables will be konp , a771,a511,a564
    here i am providing you sample query related to it
    { -Get the Territory list price YPR0
        SELECT vkorgau
               zzland1_ag
               zzmatgrade
               a511~kfrst
               datbi
               datab
               kbetr
          INTO TABLE it_list1
          FROM a511
          JOIN konp
            ON a511knumh = konpknumh
         WHERE a511~kappl = 'V'
           AND a511~kschl = 'YPR0'
           AND vkorgau = '5000'
           AND zzland1_ag = v_land1
           AND loevm_ko <> 'X'.}
    Thanks & Regards,
    Sateesh.
    Edited by: sateesh kumar on Nov 12, 2009 12:59 PM

  • How to get the Database size?

    Hai Friends,
    I have created a Z Table with 100 fields. i want to check the database size after uploading the data. How can i do this?. That is, after uploading the first entry i want to know the size and again i want to upload 5 more entries and to check the growth.
    Where can i see this?. i have checked in DB02 but even after data upload i didnt see the size. kindly explain me the process.
    Thanks..................

    Hi,
    In the Go to Menu then Check the Number of entries to track your current set of entries.
    For DB Size  check Technical Settings . Tab Logical Settings parameters the Data class and Size category can give you how much data the table can hold.
    Thanks,
    Anita

Maybe you are looking for