How to get the group key, which an approval task assign to

Hi,
When a user is assign to OIM Group (i.e. from User Detail >> Group Membership form), I will call an approval process (using Access Policy).
In that approval process, I have defined two tasks.
1) Assign Approval to Group -> NOT conditional
2) Remove OIM Group From User -> conditional
So, from the 1) task, I will assign this approval to a OIM Group.
If the user click "Approva", a provisioning process will be fired.
If the user click "Deny" (Reject), 2) task will be run.
What I want is this.
From this 2) task, I need to get the "OIM Approval group" key or name (which this approval is assigned to)......
Note: I need to get this group info in the "Approval Process Task" -> "Integration" -> "Map"
Regards,
Chaturanga

Hi,
Yes. I have done that.
Now what I want is this. If the approver "Deny" (Reject) the approval task, I will call another task in the approval process. From that task, I need to run a code, which remove the user from OIM Group.
So, to do it, I have written a java code and created a adapter. So, as a input parameter for that code, I need to give the approval group name(i.e. the OIM group, above approval task is assign to).
How can I get the OIM approval group, which the person who Deny the approval belongs to, from this new approval process task???
Regards,
Chaturanga

Similar Messages

How to get the form name which is used in standard tcode like me23n in sap

how to get the form name which is used in standard tcode like me23n in sap
Moderator message: four out of four threads locked, please read and understand the following before posting further:
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM

how to get the form name which is used in standard tcode like me23n in sap
Moderator message: four out of four threads locked, please read and understand the following before posting further:
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM

How to get the Checked box which are clicked

for(int k=0;.....
jsp code
<input type=checkbox name=checkbox value='<%=k%>' >
how to get the particular Checkbox which are checked???

String[] checkedValues = request.getParameterValues("checkbox");You'll get an array filled with the values only for the checked boxes. In other words, if no boxes are checked, checkedValues will be null or checkedValues.length == 0, not sure, going from memory.
Hope this helps!
Patrick

I create a mobile game. How to get the signing key?

I create a mobile game. How to get the signing key? Is the certificate is payable? Sorry if the topic is in the wrong section.

You need to be an iOS/Mac OS X developer.
https://developer.apple.com/devcenter/

How to get the Primary key from Synonym

Hi ,
I want to get the Primary Keys for my tables . I used
java.sql.DatabaseMetaData databasemetadata = connection.getMetaData();
    ResultSet rs = databasemetadata.getTables(null, null, "%", null);
rs.next();
    System.out.println(" TABLE_CAT "+ rs.getString(1));
    System.out.println(" TABLE_SCHEM "+rs.getString(2));
    System.out.println(" TABLE_NAME "+rs.getString(3));
    System.out.println(" TABLE_TYPE "+rs.getString(4));
    System.out.println(" REMARKS "+rs.getString(5)); gives :
TABLE_CAT null
TABLE_SCHEM PROGRESS
TABLE_NAME ApplicConv
TABLE_TYPE SYNONYM
REMARKS null
Now if I use :
rs = databasemetadata.getPrimaryKeys(null,"PROGRESS","Applicconv");
System.out.println("Is result set Non empty "+rs.next()); gives :
Is ResultSet non empty false .
Can you tell me why this result is empty? Is it because of my table is a Synonym?
If it is Synonym how to get the primary key ?

You can use DatabaseMetaData#getPrimaryKeys.

How to get the obiee dashboard secuirity in adf to assign the roles in adf for users

how to get the obiee dashboard secuirity in adf to assign the roles in adf for users

thanks Benjamin...
my present requirement is pull Role to Dashboard mapping from OBIEE Catalog
in my project we are going to restrict the users and assigning the roles from adf.
Pls Help me..

How to get the UDDI Key to publish a service provider system in SR?

Hi,
I am following instruction in appendix 1 & 2 of the white paper at https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1079b1af-dcb7-2b10-9ebb-eafcaa3cbbea?overridelayout=true
trying to publish a service provider system into the service registry. One thing not clear to me is how to get the uddikey as needed in step 6 in appendix 1.
My service registry is in a PI 7.1 SP4 system. I followed the instruction in appendix 2 but there is no uddi key displayed in the General tab. Please help.
Regards,
Jiannan
Paragraph extracted from the whitepaper:
There may be cases in which the NWA logical settings do not match the Services Repository
settings when Visual Composer is trying to locate the enterprise services. Such cases can occur
when there is no SLD ID definition of the physical system in the Services Repository.
Currently, Visual Composer cannot search for services on a physical system with an empty SLD ID
(which is not a valid one).
To obtain this capability, the following steps should be performed to generate the necessary data
for each system with a non-valid SLD ID, so that Visual Composer can search for services over it.
1.Log on to http://<serverName>:<serverPort>/WSNavigator.
2.Select the Services Registry radio button.
3.In the Find field, enter sr and choose Go.
4.Select the ServicesRegistrySi line and choose Next.
5.Under the Operation Name, search for the publishPhysicalSystems operation, select it and choose Next.
6.Fill the service information parameters with the following (see Appendix 2 for details on how to get this information) :
6.1.Click the + icon in the physical system[].
6.2.Deselect the Classifications checkbox.
6.3.Click the + icon in the classificationReferenceGroups[].
6.4.Click the + icon in the classificationReferences[].
6.5.Deselect the classificationSystemKey checkbox.
6.6.Deselect the uddiKey checkbox and enter the value <localUddiKey>.
6.7.Deselect the value checkbox and enter the value <localSystemHostName>.
6.8.Deselect the host checkbox and enter the value <localHostName>.
6.9.Deselect the physicalSystemKey checkbox.
6.10.Deselect the logical key checkbox and enter the value <System name>.<SystemHome>.<host name>.
6.11.Deselect the systemName checkbox and enter the value <system name>.
6.12.Deselect the type checkbox and enter the value 2.

Hi Jiannan,
No worries, you can go to UDDI client from the main page of PI i.e. http://<serverName>:<serverPort>/
And you use the search function for the TModel for your Physical System. Search parameters can use the % wildcard.
Hit the search and you find the UDDI Key for the Physical System.
Cheers.
Hemant Chahal

Help!! I can't find how to get the enter key......

Hi...
I am information technology student. I am now first year second semester
I need help because I don't know how to catch the enter key in JTextField.
I want to submit the form when user press the enter key in JTextField....
I only can find KeyEvent.VK_ENTER ( actually that is not what I want)
Another thing is
"How to add a JMenuItem into a JMenuItem...."
I want to do like this.... When you click the "Tools bar" in View item.. another menu comes out...???"
He he... I hope you all can understand what I mean.. because I know my english is not so good... because I am from Myanmar.
for(int i=0;i<1;i--)
System.out.println("Thanks A lot");
Thu Rein Nyo...
You also can reply by e-mail.. thanks

Hi...
I am information technology student. I am now first
year second semester
I need help because I don't know how to catch the
enter key in JTextField.it can be done easily by adding an actionListener to the JTextField. So when u enter something in the field and press enter the event will be caught and the code which u write in that will get executed.
Eg:
JTextField.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
Your code comes here.
Another thing is
"How to add a JMenuItem into a JMenuItem...."
I want to do like this.... When you click the "Tools
bar" in View item.. another menu comes out...???"I think you are gettin confused with JMenu and JMenuItem. What u need to do is create a JMenu add another JMenu to it and add JMenuItems to it.. and ur problem will be solved.
He he... I hope you all can understand what I mean..
because I know my english is not so good... because I
am from Myanmar.
for(int i=0;i<1;i--)
System.out.println("Thanks A lot");
Thu Rein Nyo...
You also can reply by e-mail.. thanks

How to get the last wbs which is displayed in transaction code cj03?

Dear Experts,
   I want to get the last wbs which are displayed in transaction code cj03, i have written below program,but i found it is incorrect. because the sort of wbs in cj03 is not equal to table prps. the last wbs in cj03 is not equal to table prps.
who can tell me how to get last wbs which is displayed in cj03?
SELECT
     PRPS~STUFE
     PRPS~POSID
     PROJ~POST1
     INTO CORRESPONDING FIELDS OF TABLE WA_PRPS_TEMP FROM PRPS INNER JOIN PROJ ON PROJPSPNR = PRPSPSPHI
     WHERE PROJ~PSPID EQ P_PROJECT.
WA_TLINE = LINES( WA_PRPS_TEMP ).
READ TABLE WA_PRPS_TEMP INDEX WA_TLINE.
IF WA_PRPS_TEMP-POSID = P_lastWBS.
    P_LAST = 1
endif.
Best Regards,
Merry

Hi Merry ,
The WBS elements are stored in the table PRPS , so please try using the conversion exit and use the data in internal format then use it in the IF condition.
Check the FM CONVERSION_EXIT_ABPSN_INPUT and CONVERSION_EXIT_ABPSN_OUTPUT
Regards,
Arun

How to get the PRIMARY KEY of a table at runtime ???

Hi everybody,
My requirement is to update a z-table at runtime according to the data given ata runtime. So the main difficulties for me is that whenever I tried to update the table based on the data given in UI many rows are getting updated as these fields are not unique. So I think if I can get the PRIMARY KEY along with these given fields then I can update only one row at a time.
So Can anyone suggest me how to get PRIMARY KEY of a table based on the data in UI..??
Any suggestions will be appreciated..
Thanks,
Sekhar

U will get primary keys of transparent tables using FM "REUSE_FIELDCALATLOG_MERGE".
pass tyour table name and u will get fieldcatalog filled. In tht their is a field called "KEY" if it has 'X' then tht field is a primary key of transparent tables & if it has "space" then it is not a primary key...
Or else you can try with 'DDIF_TABT_GET'
Or try this code
PARAMETERS: p_table TYPE tabname OBLIGATORY.
DATA: go_strucdescr   TYPE REF TO cl_abap_structdescr,
      gt_tab_fields   TYPE ddfields.
FIELD-SYMBOLS: <gwa_tab_field> TYPE dfies.
TRY .
*   Get the details of the DDIC table
    go_strucdescr ?= cl_abap_elemdescr=>describe_by_name( p_table ).
CATCH cx_sy_move_cast_error .
    MESSAGE 'Error while casting' TYPE 'S'. RETURN.
ENDTRY.
* Check if input is a DDIC table
CHECK go_strucdescr->is_ddic_type( ) = 'X'.
* Get the details of the table fields
gt_tab_fields = go_strucdescr->get_ddic_field_list( ).
* Display the Key fields of the table
LOOP AT gt_tab_fields ASSIGNING <gwa_tab_field> WHERE keyflag = 'X'.
WRITE: / <gwa_tab_field>-fieldname.
ENDLOOP.

How to get the PDF data which i have send to Spool

Dear Freinds,
               My requirement is to display the output which iam getting from a custom report(ZSALARY) in the form of PDF . So now i wanted to display the ALV output on to my desktop (as of now) in PDF format.
i have done the below coding please correct me why iam not getting the same data which is coming out of my report in the PDF, iam passing the same internal table.
IF NOT it_final[] IS INITIAL.       -
>IT_FINAL is my main internal table in the report ZSALARY
      DATA : count TYPE syprcop,
         days TYPE sypexpi,
         params TYPE pri_params,
         valid TYPE c,
      pdf_table TYPE rcl_bag_tline,
      spoolid TYPE rspoid,
      pdf_fsize TYPE i.
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
          EXPORTING
            destination    = 'LP01'
            copies         = count
            list_name      = 'ZSALARY'   -
tHIS IS MY REPORT NAME
            list_text      = 'ZSSPOOL'
            immediately    = ' '
            release        = 'X'
            new_list_id    = 'X'
            expiration     = days
            line_size      = 90
            line_count     = 65
            layout         = 'X_PAPER'
            sap_cover_page = 'X'
            receiver       = 'SAP*'
            department     = 'System'
            no_dialog      = 'X'
          IMPORTING
            out_parameters = params
            valid          = valid.
        NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
        WRITE : 'hi this is the test for spool'.
        NEW-PAGE PRINT OFF.
        COMMIT WORK.
        WRITE : / 'The Spool no is ', sy-spono. "system variable for spool no
        spoolid = sy-spono   .       -
At this point i can see the spool no.
        CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
          EXPORTING
            src_spoolid   = spoolid
            no_dialog     = 'X'
          IMPORTING
            pdf_bytecount = pdf_fsize
          TABLES
            pdf           = pdf_table
          EXCEPTIONS
            OTHERS        = 0.
        CHECK sy-subrc = 0.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            bin_filesize = pdf_fsize
            filename                = 'C:\Documents and Settings\Administrator\Desktop\test.pdf'
            filetype                = 'BIN'
          TABLES
            data_tab                = it_final
          EXCEPTIONS
            file_write_error        = 1
            no_batch                = 2
            gui_refuse_filetransfer = 3
            invalid_type            = 4
            OTHERS                  = 5.
      ENDIF.
if i go and on my desktop it is saying the below error "ADOBE READER COUDNT OPEN 'test.pdf'
because it is either not supported file type or because the file has been damaged.
my aim is to get the data which is there in IT_final in the PDF .....please correct me the parameters which i have given wrong. my doubt is in GUI_download fM in the tables should i pass it_final or
the pdf_table coming from'CONVERT_ABAPSPOOLJOB_2_PDF'...... i tried this option iam able to open and it is just giving message which i kept before this FM i.e WRITE : 'hi this is the test for spool'.
what i should to get my internal table data.
Pls help.
regards
srinivas.

Dear Karthik,
          Thank you for giving me the link there by iam able to get the ouput download int he pdf
as below code , but now a small problem for me .......i have 10 fileds in the Report ouput ....but however in the pdf output i can see only 8 fields and the two fields got truncated . Could you please tell me what
i have to change in my below code so that i can get all the values
IF NOT it_final[] IS INITIAL.
data : it_tsp01 type standard table of tsp01,
       l_wa_tsp01 type tsp01.
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
          EXPORTING
            destination    = 'LP01'
            copies         = count
            list_name      = 'ZHR_BON'
            list_text      = 'ZSSPOOL'
            immediately    = ' '
            release        = 'X'
            new_list_id    = 'X'
            expiration     = days
            line_size      = 90
            line_count     = 65
            layout         = 'X_PAPER'
            sap_cover_page = 'X'
            receiver       = 'SAP*'
            department     = 'System'
            no_dialog      = 'X'
          IMPORTING
            out_parameters = params
            valid          = valid.
SUBMIT (sy-repid) TO SAP-SPOOL
                 SPOOL PARAMETERS mstr_print_parms
                 WITHOUT SPOOL DYNPRO
                WITH pnppernr = p0001-pernr
                 AND RETURN.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
          EXPORTING
            src_spoolid   = spoolid
             no_dialog     = 'X'
             DST_DEVICE = params-PDEST
           IMPORTING
           pdf_bytecount = pdf_fsize
          TABLES
            pdf           = pdf_table
          EXCEPTIONS
            OTHERS        = 0.
        CHECK sy-subrc = 0.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            bin_filesize            = pdf_fsize
            filename                = 'C:\Documents and Settings\Administrator\Desktop\test.pdf'
            filetype                = 'BIN'
          TABLES
            data_tab                = pdf_table    "it_final
          EXCEPTIONS
            file_write_error        = 1
            no_batch                = 2
            gui_refuse_filetransfer = 3
            invalid_type            = 4
            OTHERS                  = 5.
      ENDIF.
Please tell me how i can get the all the fields which are there in my normal alv output ......
Case 1) .i wanted all the 10 fields in PDF to be displayed without truncated , I have checked in Spool ........ i found all the fields are there .....but however when i check the downloaed PDF i can see some fields are getting truncated.
Case 2) However if on the ALV output if the user hides 2 fields out of 10 fields then only 8 feilds which are appearing on the output before sending the Spool should only be displayed in PDF as well -
> for this scenario what i have to do.
Thanks Once again.
regars
srini.

How to get the group totals in report

HI,
Iam generating a report to display Storage Location, and Unit of Measures and Material group and also group totals.
how to display the group totals on the report.
thank q
rushi.

Hi,
This following report clearly explains how to display the subtotal and grand total of
the particular field in alv.
REPORT YMS_ALVSUBTOTAL.
*REPORT z_alv_sub_totals .
TYPE-POOLS: slis.
DATA: BEGIN OF it_output OCCURS 0,
          var1(8) TYPE n,
          var2(10),
          var3 TYPE I,
      END OF it_output.
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
       t_fieldcat TYPE slis_fieldcat_alv,
      it_sort TYPE slis_t_sortinfo_alv,
      t_sort TYPE slis_sortinfo_alv,
      v_repid LIKE sy-repid.
INITIALIZATION.
v_repid = sy-repid.
START-OF-SELECTION.
PERFORM get_data.
PERFORM sort_fields.
PERFORM fill_fieldcat.
PERFORM list_display.
*&      Form GET_DATA
      text
--> p1        text
<-- p2        text
FORM get_data.
it_output-var1 = 1000.
it_output-var2 = 'anupama'.
it_output-var3 = '10000'.
it_output-key = 'X'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 1000.
it_output-var2 = 'siddhu'.
it_output-var3 = '20000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 1000.
it_output-var2 = 'chinni'.
it_output-var3 = '100000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 2000.
it_output-var2 = 'chicchu'.
it_output-var3 = '10000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 2000.
it_output-var2 = 'candy'.
it_output-var3 = '10000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 1000.
it_output-var2 = 'anupama'.
it_output-var3 = '10000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 4000.
it_output-var2 = 'anupama'.
it_output-var3 = '10000'.
APPEND it_output.
CLEAR it_output.
ENDFORM.                    " GET_DATA
*&      Form fill_fieldcat
      text
--> p1        text
<-- p2        text
FORM fill_fieldcat.
PERFORM fill_fields USING: 'IT_OUTPUT' 'VAR1' 'Variable 1' ' ',
                             'IT_OUTPUT' 'VAR2' 'Variable 2' ' ',
                             'IT_OUTPUT' 'VAR3' 'Variable 3' 'X'.
ENDFORM.                    " fill_fieldcat
*&      Form fill_fields
      text
     -->P_0146   text
     -->P_0147   text
     -->P_0148   text
     -->P_0149   text
FORM fill_fields USING    value(tabname) TYPE slis_tabname
                          value(fieldname) TYPE slis_fieldname
                          value(seltext_m) LIKE dd03p-scrtext_m
                          value(do_sum) TYPE c.
t_fieldcat-tabname = tabname.
t_fieldcat-fieldname = fieldname.
t_fieldcat-seltext_m = seltext_m.
IF do_sum = 'X'.
    t_fieldcat-datatype = 'CURR'.
ENDIF.
t_fieldcat-do_sum = do_sum.
APPEND t_fieldcat TO it_fieldcat.
CLEAR t_fieldcat.
ENDFORM.                    " fill_fields
*&      Form list_display
      text
--> p1        text
<-- p2        text
FORM list_display.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
     i_callback_program             = v_repid
     it_fieldcat                    = it_fieldcat
     it_sort                        = it_sort[]
   TABLES
      t_outtab                       = it_output
   EXCEPTIONS
     program_error                  = 1
     OTHERS                         = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " list_display
*&      Form sort_fields
      text
--> p1        text
<-- p2        text
FORM sort_fields.
t_sort-fieldname = 'VAR1'.
t_sort-tabname = 'IT_OUTPUT'.
t_sort-spos = 1.
t_sort-up = 'X'.
t_sort-subtot = 'X'.
APPEND t_sort TO it_sort.
CLEAR t_sort.
t_sort-fieldname = 'VAR3'.
t_sort-tabname = 'IT_OUTPUT'.
t_sort-spos = 2.
t_sort-up = 'X'.
APPEND t_sort TO it_sort.
CLEAR t_sort.
ENDFORM.                    " sort_fields
Thanks,
Sankar M

How to get the groups info for user

Hi guys i am new to ALUI..
i am trying to do some enhancement.
i want to know how to get the information of the users group and the group details using the IDK API?
Can sombody share some code?

Hello,
You are welcome. Here is one way of get what you want:
1) get all groups id's
IPortletContext - >IRemoteSession -> IUserManager - > getCurrentUserGroups() -> int []
2) get details about group
IRemoteSession.getObjectManager(ObjectClass.UserGroup ) ->
cycle over int []: {
IObjectManager -> querySingleObject(comminity id) -> IObjectQueryRow -> getName()
Because you are going to use PRC and make SOAP calls to portal don't forget setup WS to pass token to portlet (check WS settings)
Edited by Bryazgin at 05/29/2008 7:48 PM

LabVIEW 8.0:: How to get the group name of a user logged to a NI Security Domain?

Hello all,
I am using LabVIEW 8.0 PDS.
I created a new local domain called "MyDomain" in the "NI Domain Account Manager" . I added a new User called "MyUser" and a new group called "Maintenance". I set "MyUser" to be a member of the "Maintenance" group. Then, I configured LabVIEW to invoke the login dialog at start-up in order to log "MyUser" with the correct password.
I would like to get the group name of the current user logged programmatically in a VI. I tried with the VI Server >> Application >> Security properties and methods and also with the properties and methods of the NI Security Class but it seems to be not so simple as I believed at start.
I do not find any informations or KB on this (all the documents I found deal with LV DSC or TestStand).
The final goal is to be able to manage a list of user for my application. Each user is a member of a group ("Administrator", "Operator", "Maintenance") and depending on the group, the user can or cannot access to some parts of the application.
Thanks for your help.
Matthieu
Eurilogic

Re,
Here is a screenshot of this functions...
If you really own LV DSC 8.2 the best thing to do is to reinstall it.
Regards,
Message Edité par Richard K. le 04-02-2007 04:00 AM
Richard Keromen
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Découvrez, en vidéo, les innovations technologiques réalisées en éco-conception
Attachments:
security.jpg ‏3841 KB

How to Decativate the Grouping key in Vendor Master?

Hello All,
I'm trying to create a Vendor from the transaction code FK01, I fill up all the details and when i come to the dinning part of the master it does let me save the vendor and asks for a "Valid Grouping Key"....i have checked with spro setting for Define Layout per company code (Vendor), there the radio button is at OPTIONAL for Dunning Area.
How can i get the system saving the vendor without asking me for a Grouping Key?
Thanks,
Tushar

Hi ,
Go to the vendor account group field status Filed status and supress the Single pmnt, grp key, PM supl field.
Company code data>Payment transactions>Single pmnt, grp key, PM supl.
Regards
Surya

How to get the group key, which an approval task assign to

Similar Messages

Maybe you are looking for