How to get the initdefault run level in Solaris 10

Hi All,
In Solaris 9 and below
I will get the init run-level by checking the /etc/inittab entry
is:3:initdefault:
But in Solaris 10 we are using the smf functionality.
Here how I can get the init default run level.
Please help me in this problem.
Regards,
Kalai

Init levels no longer form a 1:1 mapping with how SMF will run things.
The default milestone is 'all'. You can override this on the boot line. I'm not sure how you might change it within the filesystem.
Darren

Similar Messages

How to get the sparc c compiler in solaris 9.

How to get the sparc c compiler in solaris9 is the licence one?. If it is license what was the procedure to get the software.

The gcc compiler is available on the "extra" disk in Solaris 9, but we don't recommend using gcc for Solaris development. (You can if you want to, but you will get better performance using the Studio C compiler.
For Solaris 9, which is now obsolete, the most recent version of Studio that supports it is Sun Studio 12 (released in 2007). You can download it here:
http://www.oracle.com/technetwork/server-storage/solarisstudio/downloads/ss12-136026.html
Patches for Studio 12 are available to fix known bugs, but you need a service contract with Oracle to get them. Click on the "Support" tab for details.

How to get the last run date.

We intend to develop an incremental data load mapping using this strategy:
1) The mapping reads the date it was last run from an auxiliary table.
2) It selects from the source only those rows that were inserted or updated after said date.
3) Then, a post-mapping process updates the last run date in the auxiliary table, using SYSDATE.
The problem with this logic is that there is a gap: if the mapping starts running at 1:00 and ends at 2:00, the rows that are inserted in between will never be loaded.
Is there any way to get the value when the mapping started running? Is there a better way to do this?
Any help would be appreciated.
Juan Algaba

There is always the possibility of some record updates slipping through the crack if you are depending on dates unless you are very carefull. All of the audit tasks that the OWB-generate code performes take time. Any pre- or post- process that needs to run takes time. So which date is the best cuttoff point to equate to "when the last run of the merge (or insert or update) statement completed"?
Plus, how do you handle reloads if the previous load failed and your mapping had incremental commits?
Is your source on another server? If so, are the dates in perfect synch? The audit tables populate with sysdate of your runtime schema. Is that the same as the sysdate on your source remote database?
I would qualify my query to look for all updates since the start of the last run that finished successfully - adjusted if neccesary for sysdate differences if it is on a remote schema. And make sure that your code handles any reloads gracefully in the event that this brings back data that you have already loaded once. .
Because we use Oracle Streams to load a local staging area, we also have custom code to dump the primary keys of all data changes to utility staging tables while streams is updating the local copy. So, our Person table has an st_Person_delta table that just holds the primary keys that have been updated by Streams since the last ETL run.
During datamart load we disable the streams apply to stabilize our environment, and join these lists of pk's to their source tables to drive our ETL. So we only select data where Streams has performed an update to the row since our last run. When we are done our ETL, we truncate the primary key staging tables, and then turn streams back on to start loading up our new delta into our staging tables again..
The ETL gets pretty complex though when many tables join together in one mapping and you need to check all possible source table deltas to see if any of them got updated to determine the delta for a given dimension or fact record, but it works great once you get it all done.

How to get the current running activity , suspend it and then restart it?

hi everybody,
i'm new in the Bpel world so please try to help me ...
So my question is how, while a bpel process is running, can i get the activity currently running...and if there is a problem while the execution i can get where exactly did the process stopped and i could restart it?
i know these are lot of questions but any thing could help....
thanks in advance

i already tried JAVA BPEL PM API i wrote the code but i didn't test it yet...
since i don't know yet how to write a hole project running in the oracle server i couldn't konw if my code is running or not???
Locator locator = new Locator("default","bpel");
WhereCondition where = WhereConditionHelper.whereActivitiesOpen();
IActivityHandle[] activityHandles=locator.listActivities(where);
System.out.println("state of an activity "+ activityHandles[2].getState()+ " " +activityHandles[2].getLabel());
but to know which activity was running when a problem occured...i'll give a look to the file you gave me about bpel fault policies....
but to restart the process with java code from specific activity...i didn't find in the API something to do this..
so may be you could help in this point???
thanks in advance

DSC Alarms: how to get the current alarm levels / setpoints

I have a VI that can get the alarm levels for shared variables as they are set in the project library.
But I have programmatically changed the values for the alarm levels, so the Distributed System Manager shows different levels as compared to what my VI displays. I want the updated or current alarm levels - the ones that are retrieved by Read Alarms (called setpoints).
I could use Read Alarms, but that only shows the shared variables that are in alarm. I want all the shared variables in a process that is currently deployed.
Any suggestions?
BTW, is Distributed System Manager the same tool as Shared Variable Monitor? I can't find the Shared Variable Monitor on my system.
G

Hi Gretchen,
To answer your second question first, Shared Variable Monitor was the old name for what became Distributed System Manager. There was also some added functionality beyond just shared variables with DSM, so the name got changed.
As for suggestions regarding your application, I could use a little bit of clarification. I understand you're programmatically changing the alarm values and you want to display the values of your shared variables and their respective alarm states, correct? Also, when you're running your VI DSM does not update with the new alarm values (what happens when you hit the refresh button?).
I found a couple examples that may be useful moving forward Example 1, Example 2. These cover using shared variables and DSC's alarming features.
Tim W.
Applications Engineering
National Instruments
http://www.ni.com/support

How to get the Minum Grade level from the view cluster table V_T710CL_B

Hi Guys,
I want to fetch the Minum Grade level from the view cluster table V_T710CL_B
kindly help me
Regards
Rusidar.

HI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh

How to get the multidementional hierarchy level number ?

Dear all,
Could anyone tell me how to receive the hierarchy level number like the picture below:
[click here for the Screenshot|http://yaoxin.de/download/level.jpg]
as you can see, when i mouse hove on a level, it shows the level number.
but, I want to get the level number 2 (node number 2) in query designer, but i can't find anywhere to show that.
thank you for your kind help !
Edited by: Xin Yao on Aug 26, 2011 1:04 PM

hi Charlie Belt,
Thank you very much for your answer.
And yes, I do wish to perform a calculation based (aggregation) on the hierarchy level.
How can I continue working on that?
yao
wish you have a nice weekend!

How to get the form run time debug log file

Hi,
I followed the instruction of Metalink Notes:
R12: Forms Runtime Diagnostics (FRD), Tracing And Logging For Forms In Oracle Applications [ID 438652.1]
Option 1: Obtain FRD Trace Using Profile Options
Method 1: Using profile option 'ICX: Forms Launcher'
I was not able to get the log file.
Any suggestions

This problem is specific to the eBusiness-suite. Try it in an appropiate forum, maybe here OA Framework

How to get the date in caps from solaris

Hi,
There is a requirement where the date should be 22-JULY-2008.When i used the date +%d-%B-%y i get the result as 22-July-2008.How can i convert it to
22-JULY-2008.I tried a lot to get the results in this format but could not succeed.
Can anyone suggest ?

I am totally confused
1) This is a forum discussing problems with downloads of Oracle products
2) This seems to be a question about Solaris shells or some Oracle product running in Solaris shell
If it truly is about the Solaris command 'date' ... Sun spends much money creating and maintining manuals and pages in manuals. You might get an adequate answer from http://docs.sun.com/app/docs/doc/816-0210/6m6nb7m46?a=expand (scroll down and click on the 'date' link)

How to get the last run date of an ISchedulerTask ?

Hello,
I have implemented an ISchedulerTask and inside the run method I would like to get a reference to the last timestamp/date that the task was running, any idea how to achieve that?
Rgds,
Roy

Hi
You can create a custom metadata property and set this property with the date when the Ischedlar task runs.
So, in your code you can read this property whenever you want to read the previous date.
Hope this works.
Thanks
Puneet

How to get the content in embed swf file in Swf Loader on run time

How to get the content in embed swf file in Swf Loader on run time
[Bindable]
[Embed(source="assets/index.swf")]
private var SWFSRC:Class;
<mx:SWFLoader id="_swfloader" source="{SWFSRC}" />

Hi Flex harUI,
Throw the error.
Access of undefined property content

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help says File >Library >Export playlist and choose XML, or to save a copy of all your playlists, File > Library > Export Library, "the Exported info is saved in XML format." Then it says, "to import an iTunes playlist, File > Library > Import Playlist". Now I am assuming I do that import part on the Air, but when I try it doesn't recognize anything that can be imported - what am I missing??? Aside from a clue...

Thanks, Jim, for taking the time, but the reply is unfortunately vague in the exact area of my confusion! "you need to copy that file to your new computer..." Well, the Import/Export instructions make it seem as if the two computers should be able to communicate this file thru wifi, but that's the linkage I can't seem tocreate with Import/Export. Should I instead email a copy to myself (thats what applecare suggested)? Copy it to and from a thumb drive? But then place the file where? And the article was helpful, but should I be trying to move the Library file or the Library.xml file (as iTunes Help suggests)? Sorry to be so clueless about it...I suppose I buy Apple in the hopes of not having to think about this stuff, which approach seems not to be serving me well. Thanks again for your time!

How to get the current request id in a running request?

How to get the current request id in a running request?
Thanks.

Did you notice that there's a whole section on this forum dedicated to this topic, called E-Business Suite?
C.

How to get the SQL Signon that Agent Jobs "Run As" or "Executed as User"

How to get the SQL Signon that Agent Jobs "Run As" or "Executed as User"?
I have an install SQL scripts that creates a Linked Server. I want to put some security on the Linked Server and only grant the Agent Job Signon (the "Run As" or "Executed as User") access to the linked server. I need to retrieve the
Agent Job Signon (something like "NT SERVICE\SQLAgent$FIDEV360BI02").
I could query certain jobs and SUBSTRING the Message column - using some form of the query below, which would return "Executed as user: NT SERVICE\SQLAgent$SSDEVBI02. The step succeeded." But that is pretty imprecise.
use msdb
SELECT [JobName] = JOB.name,
[Step] = HIST.step_id,
[StepName] = HIST.step_name,
[Message] = HIST.message,
[Status] = CASE WHEN HIST.run_status = 0 THEN 'Failed'
WHEN HIST.run_status = 1 THEN 'Succeeded'
WHEN HIST.run_status = 2 THEN 'Retry'
WHEN HIST.run_status = 3 THEN 'Canceled'
END,
[RunDate] = HIST.run_date,
[RunTime] = HIST.run_time,
[Duration] = HIST.run_duration,
[Retries] = HIST.retries_attempted
FROM sysjobs JOB
INNER JOIN sysjobhistory HIST ON HIST.job_id = JOB.job_id
-- CHANGE THIS
-- WHERE JOB.name like '%GroupMaster%' or Job.name like '%etlv%'
ORDER BY HIST.run_date, HIST.run_time

by default all sql jobs are executed as sql server agent account, unless otherwise a proxy is setup.
you can get the proxy information as Olaf mentioned, if the proxy_id is null for the step, it implies that the job step was executed as sql server service account and in such case it will be null
so, if it is null, it ran as sql server agent account.
so, one work around is get the sql server agent service account and if the proxy is null, that means it ran as sql server agent account, so, use isnull function. the disadvantage would be if the sql server agent account was switched, you might not get the
accurate information as the new account will show up though the job really ran as old account, to get this information, you need to get this from the logmessage column as you mentioned above.
try this code...
/*from sql 2008r2 sp1, you get the service accounts using tsql,otherwise you have to query the registry keys*/
declare @sqlserveragentaccount varchar(2000)
select @sqlserveragentaccount= service_account
from sys.dm_server_services
where servicename like '%sql%server%agent%'
select message,isnull(name,@sqlserveragentaccount) as AccountName
from sysjobhistory a inner join sysjobsteps b
on a.step_id=b.step_id and a.job_id=b.job_id
left outer join sysproxies c on c.proxy_id=b.proxy_id
Hope it Helps!!

How to get the running time on the page

Hello ,
I want to display the running clock and the user who loggin in .
Pls let me know how to get the running clock display and the username who log in.
thakns
kumar

Hi,
You can use javascript clock and substitution string APP_USER
Place this to HTML region source
<input type="text" id="clock" /><span>&APP_USER.</span>
<script language="JavaScript">
function runClock(){
theTime = window.setTimeout("runClock()", 1000);
var RightNow = new Date();
var hrNow = RightNow.getHours();
var mnNow = RightNow.getMinutes();
var scNow = RightNow.getSeconds();
var miNow = RightNow.getTime();
var mon = RightNow.getMonth() + 1;
var date = RightNow.getDate();
var year = RightNow.getFullYear();
var day = RightNow.getDay();
if(hrNow == 0) {hour = 12;var ap = " AM";}
else if(hrNow <= 11) {ap = " AM";hour = hrNow;}
else if(hrNow == 12) {ap = " PM";hour = 12;}
else if (hrNow >= 13) {hour = (hrNow - 12);ap = " PM";}
if(hrNow >= 13) {hour = hrNow - 12;}
if(mnNow <= 9) {min = "0" + mnNow;}
else{min = mnNow}
if (scNow <= 9) {secs = "0" + scNow;}
else {secs = scNow;}
var zday=new Array(7)
if (day==0) {zday="Sunday"};
if (day==1) {zday="Monday"};
if (day==2) {zday="Tuesday"};
if (day==3) {zday="Wednesday"};
if (day==4) {zday="Thursday"};
if (day==5) {zday="Friday"};
if (day==6) {zday="Saturday"};
var zmon = new Array(12)
if (mon==1) {zmon="January"};
if (mon==2) {zmon="February"};
if (mon==3) {zmon="March"};
if (mon==4) {zmon="April"};
if (mon==5) {zmon="May"};
if (mon==6) {zmon="June"};
if (mon==7) {zmon="July"};
if (mon==8) {zmon="August"};
if (mon==9) {zmon="September"};
if (mon==10) {zmon="October"};
if (mon==11) {zmon="November"};
if (mon==12) {zmon="December"};
$x('clock').value=""+zday+", "+zmon+" "+date+", "+year+" "+hour+":"+min+":"+secs+ap+"";
runClock();
</script>Use styles to get look you like to input and span tag
Br,Jari

How to get the initdefault run level in Solaris 10

Similar Messages

Maybe you are looking for