How to get the IP list

I want to list the ip address for all the systems present in the same subnet.
Here I have two doubts,
1. How to get the available subnet list.(we might use two or more ethernet also. how to get that list).
2. How to get the ip address of the conneted systems via that subnets?

Icebreaker wrote:
I want to list the ip address for all the systems present in the same subnet.
ask your network administrator. He may have one.
Here I have two doubts,
1. How to get the available subnet list.(we might use two or more ethernet also. how to get that list).ask your network administrator.
2. How to get the ip address of the conneted systems via that subnets?ask your network administrator.
There's no automated way to do that that's failsafe and won't get people extremely angry at you for flooding the network with traffic.

Similar Messages

  • How to get the users list that can Add/Remove or modify Vendors in Oracle?

    How to get the users list that can Add/Remove or modify Vendors in Oracle?
    I need to generate a report like name and responsibility. Thanks

    That query gives the Supplier information.
    But what i would be needing is to find out the USERS in oracle who can Add/Modify or Remove Vendors.
    I assume it should be based on the Responsibility.

  • How to get the whole list of Iview Templates

    Hi,
    when I navigate:
    Portal Content -> Content Provided by SAP -> Templates -> Iview Templates
    I get a long list of templates including Url Iviews etc
    But, when I try to create my own Iview, the list of potential templates is much smaller, mainly including only the SAP related templates, BSP, Query, ITS etc.
    Does anyone know how to make the full list of Iview Templates available for the Iview creation wizard ?
    Thanks,
    Tomas.

    Hi Tomas,
    which iView templates are offerd within the iView creation wizard is determined by SystemAdmin -- Permissions -- Portal Permissions -- Applications.
    Normally, you will have to have SuperAdminRole to see/change these settings.
    Hope it helps
    Detlev
    PS: Please consider to reward points for helpful answers. Thanks in advance!

  • How to get the material list displayed in CU50 transaction into ABAP report

    How to get the 'KMAT" type material list displayed in CU50 transaction into ABAP report?
    I am getting the entire BOM when i am using the FM CS_BOM_EXPL_MAT_V2 in to the table in the report.
    But I want only the material list displayed in CU50.

    Hi,
    Could you please tell us how you found a solution to your problem?
    Thanks & regards
    Hassan

  • How to get the user list under role

    Hi Gurus,
    in mdm console, if you select a role, you will see the users who are assigned to this role.
    how can I get this user list through java api.
    Ouser server is  MDM7.1SP5
    Best regards,
    John

    Hello John
    you cann't get users list.
    you can get user roles information since SAP MDM 7.1 SP3:
    com.sap.mdm.security.commands GetUserRoles Command
    A command to retrieve the array of roles for the specified user
    more about api  you can read here(What's New in MDM Java and .NET API - part):
    http://help.sap.com/saphelp_nwmdm71/helpdata/en/13/041975d8ce4d4287d5205816ea955a/frameset.htm
    Regards
    Kanstantsin Chernichenka
    Edited by: Kanstantsin Chernichenka on Mar 11, 2011 3:10 PM

  • How to get the host list in the wifi on mobile devices?

    Hi
    My AIR app need work on both Android and iOS.
    ServerSocket and DatagramSocket are neither supported on mobile device. So how can I get the IP of other hosts in my wifi?
    I tried to get the ip range and use socket to connect them one by one to check if they are available. But it's too slow. Is there another quick way?
    Thanks

    Thank you Saumitra Bhave. I download some samples and read some articles for how to use native functions.
    But many things are sitll not clear to me, so I failed. Let me describe my flow:
    1. compile all Java code to a .jar file, and put it into Android-ARM folder in my project.
    2. create some functions to call the .jar with flash.external.ExtensionContext.
    3. create a extension.xml to describe the path.
    4. use command to compile .jar and AS functions into .ane with ADT.
    then I can use this .ane file in any my AS project, right?
    BTW, I'm using Flash Profassional, no Flash Builder 4.6.

  • How to Get the required List Item values by using Where Clause

    I have two tables named "TAX_RULES","BILL"
    1. " Tax_Rules" (Sub_Head_Code,Tax_ID,Tax_Percentage)
    { While "Sub_Head_Code" field is unique,
    Tax_ID describes that there are two kinds of Tax_IDs based on Tax_percentage which is 6% for some Sub_Head_Codes and 3.5% for the remainng Sub_Head_Codes. I have given Tax_ID 1 for 6% and Tax_ID 2 for Sub_Head_codes having 3.5%. }
    2. "BILL" (Bill_ID,Sub_Head_Code,Tax_ID,Bill_Amount)
    {While "Bill_ID" describes unique Bill Identification Number,
    Sub_Head_Code and Tax_ID are behaving like composite foreign key from Tax_Rules table}
    I have design form for both tables.
    In BILL form i am trying to get values of Tax_ID from Tax_Rules table at run-time by using WHEN-NEW-FORM-INSTANCE.
    For this whenever i select a Sub_Head_Code in Bill Form, all the Tax_IDs that i have recorded against each Sub_Head_Code which is either 1 or 2 against 6% and 3.5% respectively.
    But I want that whenever i select a "Sub_Head_Code", Only that Tax_ID which is associated with that Sub_Head_Code ahould come in the LIST ITEM.
    I have used WHERE clause but that is useless.
    Following is the Code that i have applied in the WHE-NEW-ITEM-INSTANCE Trigger at FORM LEVEL
    <CODE>
    DECLARE
         rg_n1 VARCHAR2(40) :='TAX_ID';
         rg_idn1 RecordGroup;
         gc_idn1 GroupColumn;
         errcode NUMBER;
    BEGIN
         CLEAR_LIST('BILL.TAX_ID');
         rg_idn1 := Find_Group(rg_n1);
    IF      Id_Null(rg_idn1) then
              rg_idn1 := Create_Group(rg_n1);
         gc_idn1 := Add_Group_Column(rg_idn1,'EXPLAIN',CHAR_COLUMN,60);     
              gc_idn1 := Add_Group_Column(rg_idn1,'TAX_ID',CHAR_COLUMN,3);
         END IF;
         errcode := Populate_Group_With_Query(rg_idn1,'select TAX_ID,TAX_ID from TAX_RULES');
         POPULATE_LIST('BILL.TAX_ID',RG_IDn1);
    END;
    </CODE>

    In the Tax Rules table, you state:
    "Sub_Head_Code" field is unique
    In the Bill table, you state:
    Sub_Head_Code and Tax_ID are behaving like composite foreign key from Tax_Rules table
    If the Sub_Head_Code is unique, then it's acting as a primary key, so Sub_Head_Code and Tax_ID in the Bill table are not behaving like a composite foreign key. The Sub_Head_Code is a foreign key, and the Tax_ID is irrelevant as far as keys are concerned.
    It is not clear what it is you want to do.
    If you want to display the Tax_IDs from the Bill table when you select a Sub_Head_Code from the Tax_Rules table, then change your query to:
    select TAX_ID, TAX_ID from BILL where Sub_Head_Code = :Tax_Rules.Sub_Head_Code
    If you want to display the Tax_IDs from the Tax_Rules table when you select a Sub_Head_Code from the Bill table, then change your query to:
    select TAX_ID, TAX_ID from TAX_RULES where Sub_Head_Code = :Bill.Sub_Head_Code
    If this is not what you want, then clarify what it is you want to do. Don't say:
    "I want that whenever i select a "Sub_Head_Code", Only that Tax_ID which is associated with that Sub_Head_Code"
    because it is not clear what tables you are referring to.

  • How to get the sorted Groups in Adminstration Portal

    after adding a Child Group to the parent Group the Child Groups are not sorted.So
    how to get the sorted list when any child group is added to a parent group.In
    which class we have to make the changes to get the sorted group.

    Hi  Manorama,
    1) If you have already created a portal system as mentioned in following blog
                  /people/marcel.salein/blog/2007/03/14/how-to-create-a-portal-system-for-using-it-in-visual-composer
    2) If not, then try to create the same. Do not forgot to give the Alias name .
    3) After creating a system, log on to the VC, Create one iView.
    4) Now Click on "Find Data" button from the list which you can view in right side to Visual composer screen.
    5) After clicking on "Find Data" button, it will ask for System. If you have created your system correctly and Alias name is given properly, then your mentioned Alias name is appeared in that list.
    6) Select your system Alias name and perform search.
    7) It will display all the BAPIs and RFCs in your systems.
    8) Select required BAPI and develop the VC application.
    Please let me know if you any further problems.
    Thanks,
    Prashant
    Do reward points for useful answers.

  • Get the file list of a given directory

    does anyone know how to get the file list of a given directory? I tried "list"/"filelist" but the class not found.
    THanks!

    What made you assume that there exist classes called list or filelist etc.
    Do you read API documentation etc ?
    Anyways, here is a hint java.io.File.listFiles()

  • How to get workflow task list ID?

    I created simple workflow in Office 365 SharePoint 2013 using SharePoint Designer 2013.
    The action Assign a task to user (Task outcome to Variable: Outcome |Task ID to Variable: TaskID) was used.
    The variable TaskID had a value something look like
    902aa0e9-0d58-47c0-a3ba-da96ebd47651, but I need ID from a task list.
    How to get the task list ID in SharePoint Designer Workflow?
    I am very grateful in advance for any help.
    bnossov

    I created dictionary and create two variables:
    Name: Accept; Type: string; Value:
     application/json;odata=verbose;
    Name: Content-Type ; Type: string; Value: application/json;odata=verbose;
    Output variable: JSonRequestHeader.
    I called HTTP web service:
    https://xxxxxx/_api/web/Lists/getbytitle('WorkflowTaskList')/items?$select=ID
    I used Count Items in Variables: JsonRequestHeader(Output to Variable: count)
    The output variable count had value equals 2.
    When I printed service url in browser it gave me xml with all the items ID in the
    WorkflowTaskList.  There were eight .
    How can I take data from web service and put them in dictionary?
    I would be grateful for any help.
    bnossov

  • How to get the list of materials from Sap r/3

    Hi Experts,
    I have one doubt, here iam implementing
    HTTP TO RFC scenario.
    My doubts are------
    1. Should we create DT MT MI and all (OR) not
    2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).
    3.Or the second thing is how to get the list of materials start with some alphabate.
    Please reply me for each and every questions mentioned above. Please clarify me.
    Helpful answers wil be rewarded.
    Reagards
    khanna

    Hi Khanna,
    <i> 1. Should we create DT MT MI and all (OR) not</i>
        Yes U need to create for HTTP site...for RFC U need to import..
    <i>2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).</i>
        You create your own structres for Request and respoce.. and Map it with RFC..
    <i>3.Or the second thing is how to get the list of materials start with some alphabate.</i>
        I think it will come with acending order....
      for more help go through this link
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
    regards,
    Ansar.

  • How to get the list of users who has access for list of tcodes.

    How to get the list of users who has access for list of tcodes.

    Go to transaction SUIM, this has a number of reports for users/authorisations
    open the Where used>Autorization Values>In Users
    and double click to execute
    in authorisation object, enter S_TCODE
    then press the "Enter Values" button
    It will offer entry boxes to put the transaction code you are interesed in.
    Then execute and the list of users with access to this transaciton code will be returned.

  • How to get the list of active devices in current wifi network?

    Hi All,
    I am going to a start a new Network based app. So please any one give me an idea on the below question.
    How to get the list of active devices in current wifi network?

    Nope I want the log-in user to retrieve its Group where he is belong. I have this following code
    strUsername = Request.getParameter("username").toLowerCase().trim()+"@dev.test.com.ph";
    strPassword = Request.getParameter("password").toLowerCase().trim();
    Hashtable env = new Hashtable();
    env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
    env.put(Context.PROVIDER_URL, MY_HOST);
    env.put(Context.SECURITY_AUTHENTICATION, "simple");
    env.put(Context.SECURITY_PRINCIPAL,strUsername);
    env.put(Context.SECURITY_CREDENTIALS, strPassword);
    // enable tracing
    env.put("com.sun.naming.ldap.trace.ber", System.err);
    // Create the initial context
    DirContext initCtx = new InitialDirContext(env);
    // Get the target context
    DirContext targetCtx = (DirContext)initCtx.lookup("");
    SearchControls constraints = new SearchControls();
    constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
    // Perform the search on the target context
    NamingEnumeration enum = targetCtx.search("","(userPrincipalName="+strUsername+")",constraints);
    javax.naming.directory.Attributes attrs;
    NameClassPair item;
    String[] attrIds = new String[]{"MemberOf"};
    // For each answer found, get its "Groups" attribute
    // If relative, resolve it relative to the target context
    // If not relative, resolve it relative to the initial context
    while (enum.hasMore()) {
    item = (NameClassPair)enum.next();
    Out.println(item);
    attrs = targetCtx.getAttributes(item.getName(), attrIds);
    Out.println(attrs + "<br>");
         initCtx.close();
    It returns all this string :
    {memberof=memberOf: CN=CMCanadaRD,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=iMngrCanadaRW,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=Domain Users,CN=Users,DC=dev,DC=test,DC=com,DC=ph, CN=Backup Operators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph, CN=Administrators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph}
    How can i retrieve the Group named CMCanadaRW and CMCanadaRD on the Attribute?
    Thanks

  • How to get the list of actie users in the moss website !!

    Hello Everybody,
    I need to get the list of active users with access in the moss websites like following format.
    User name         User mailid       permission
    one of the project manager requested to find list of active users with user accesses in the moss website.
    he wants to modify the user permissions.
    Kindly suggest me how to get the users with permissions.
    Thanks.

    Hi,
    I have developed that code to retrieve the users, groups and permissions
    if (orole.Member.PrincipalType.ToString() == "SharePointGroup")
    lvigroup = new ListViewItem();
    lvigroup.Text = orole.Member.LoginName;
    // args.GroupsList.Items.Add(lvigroup);
    DoUpdate1(lvigroup);
    Group group = clientContext.Web.SiteGroups.GetById(orole.Member.Id);
    UserCollection collUser = group.Users;
    clientContext.Load(collUser);
    clientContext.ExecuteQuery();
    foreach (User oUser in collUser)
    lvigroup = new ListViewItem();
    lvigroup.Text = "";
    lvsigroup = new ListViewItem.ListViewSubItem();
    lvsigroup.Text = oUser.LoginName;
    lvigroup.SubItems.Add(lvsigroup);
    //args.GroupsList.Items.Add(lvigroup);
    DoUpdate1(lvigroup);
    // MessageBox.Show(oUser.LoginName);
    RoleDefinitionBindingCollection roleDefsbindings = null;
    roleDefsbindings = orole.RoleDefinitionBindings;
    clientContext.Load(roleDefsbindings);
    clientContext.ExecuteQuery();
    //permission level
    lvsi = new ListViewItem.ListViewSubItem();
    string permissionsstr = string.Empty;
    for (int i = 0; i < roleDefsbindings.Count; i++)
    if (i == roleDefsbindings.Count - 1)
    permissionsstr = permissionsstr += roleDefsbindings[i].Name;
    else
    permissionsstr = permissionsstr += roleDefsbindings[i].Name + ", ";
    Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

  • How to get the list of Group set in each Users in MS Active Directory

    Hi. I would like to know if you know how to get the set group of each user in Active Directory?
    We have this sample code
    String INITCTX ="com.sun.jndi.ldap.LdapCtxFactory";
    //String MY_HOST = "ldap://myserver/ou=dev,dc=test,dc=com,dc=ph";
    String MY_HOST ="ldap://myserver.dev.test.com.ph:389/dc=dev,dc=test,dc=com,dc=ph";
    String strUsername,strPassword;
    try
         strUsername = Request.getParameter("username").toLowerCase().trim();
         strPassword = Request.getParameter("password").toLowerCase().trim();
         Hashtable env = new Hashtable();
         env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
         env.put(Context.PROVIDER_URL, MY_HOST);
         env.put(Context.SECURITY_AUTHENTICATION, "simple");
         env.put(Context.SECURITY_PRINCIPAL,strUsername+"@dev.lst.com.ph");
         env.put(Context.SECURITY_CREDENTIALS, strPassword);
    After validating the User Name and Password the next task is to Retrieve the group list of the User.

    Nope I want the log-in user to retrieve its Group where he is belong. I have this following code
    strUsername = Request.getParameter("username").toLowerCase().trim()+"@dev.test.com.ph";
    strPassword = Request.getParameter("password").toLowerCase().trim();
    Hashtable env = new Hashtable();
    env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
    env.put(Context.PROVIDER_URL, MY_HOST);
    env.put(Context.SECURITY_AUTHENTICATION, "simple");
    env.put(Context.SECURITY_PRINCIPAL,strUsername);
    env.put(Context.SECURITY_CREDENTIALS, strPassword);
    // enable tracing
    env.put("com.sun.naming.ldap.trace.ber", System.err);
    // Create the initial context
    DirContext initCtx = new InitialDirContext(env);
    // Get the target context
    DirContext targetCtx = (DirContext)initCtx.lookup("");
    SearchControls constraints = new SearchControls();
    constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
    // Perform the search on the target context
    NamingEnumeration enum = targetCtx.search("","(userPrincipalName="+strUsername+")",constraints);
    javax.naming.directory.Attributes attrs;
    NameClassPair item;
    String[] attrIds = new String[]{"MemberOf"};
    // For each answer found, get its "Groups" attribute
    // If relative, resolve it relative to the target context
    // If not relative, resolve it relative to the initial context
    while (enum.hasMore()) {
    item = (NameClassPair)enum.next();
    Out.println(item);
    attrs = targetCtx.getAttributes(item.getName(), attrIds);
    Out.println(attrs + "<br>");
         initCtx.close();
    It returns all this string :
    {memberof=memberOf: CN=CMCanadaRD,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=iMngrCanadaRW,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=Domain Users,CN=Users,DC=dev,DC=test,DC=com,DC=ph, CN=Backup Operators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph, CN=Administrators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph}
    How can i retrieve the Group named CMCanadaRW and CMCanadaRD on the Attribute?
    Thanks

Maybe you are looking for

  • Is there an (easy) way to retrieve all exceptions before returning?

    What is the typical approach if I have a form submitting data to a stored procedure for inserting a new row and I want to return not the first exception (say, a unique constraint violation) but all constraint violations? I want to not have situation

  • JSP is not updated after redeploying new war file

    Hi I have a simple code change in JSP in a war file. When I redeploy the war file, I do not see modified JSP. Very strange. I am using Weblogic 8.1 and copying new war file under Admin/upload folder. Thank you RM

  • Moving from iPhoto to Aperture with limited drive space

    My biggest concern is the lack of space on my MacBook Air. I have already purchased and download Aperture. In the Import window I see the "move files" radiobutton and the "copy files" radiobutton under the "Store Files:" dropdown,  but they are disab

  • [BSPWM] Issues with my windows being the wrong shape for my monitor.

    I wasn't sure what to name this, but I guess that doesn't matter.  Simple backstory: I'm running arch on my laptop. I used to run a dual monitor setup (my laptop's screen and an external monitor); however, as of a little while ago, the laptop's scree

  • Concatenate  : extract from non-SAP

    Hello All, I am extracting some records from a non-SAP system via XI. The problem is with the 0UNIT field. data from SIBEL is stored as "Hou" (hours) but in BW we can only use "H". Can any one tell me how can i transform "hou" to "h"in BW. any syntax