How to get the page navigation buttons back at the bottom of the page?

After upgrading to Acrobat X I discovered that there is only one option for the page navigation buttons - at the upper left. I'm mystified as to why they put them there. Most users are right-handed. With the buttons at upper left it's awkward to reach up there, across the page, with the mouse cursor for every page turn (yeah, I know you can use the PgUp/PgDnkeyboard keys, but that requires taking your hand off the mouse every page turn).
What I really want is to be able to put a copy of these buttons back down at the bottom center of the page, which was an option in previous versions. Is there some way to get those back at the bottom?

Hi terpenoid,
Have you tried Read Mode yet ( under the View menu)? It displays a nivagation bar at the bottom of the PDF with next/previous page, zoom in/out, etc.
Hope this helps,
Dimitri
WindJack Solutions
www.windjack.com
www.pdfscripting.com

Similar Messages

How can I separate the "Icons and Text" of the browser control buttons (Back, Forward, etc.) from the Icons on the Add-on toolbar?

At home, this is not an issue. I don't know why it's different here at work--same installation, same settings (as far as I can tell).
Windows Vista
Firefox 7.0.1
Status-4-Evar installed to turn add-on bar into a status bar
I have a NoScript add-on icon in the corner, which works fine. If I add a GreaseMonkey icon from the Customize menu, the "Icon and Text" appears for that icon, like the Icon and Text from the browser controls (Home, stop, etc). Other add-on icons also show Icon and Text (S4E, for instance). NoScript is the only one I've found so far which collapses down to just an Icon.
This leads to the status (add-on) bar having a much larger height than I like. Essentially what I want is for only the Icon to appear in the Status bar (Add-on toolbar), while keeping Icons and Text in the Browser controls. My current workaround is simply removing the other add-on icons from the status (add-on) toolbar, but that takes away the ease of toggling and setting options.
Please tell me if I can provide you with anything else, and thanks for your help.
Edit: I've got some screenshots to show what I mean.
[http://i41.tinypic.com/ftek9s.jpg desired behavior]
[http://i43.tinypic.com/1z6a4h3.jpg problem when icon is added]

Surely there must be some UserChrome.css that will solve this problem. Something like this:
/* Remove text titles for icons in add-on bar */
addonbar .button-text {
visibility: collapse !important;
Unfortunately that does not work. I probably have the button text item name wrong (there is a pound sign before addonbar but it doesn't show in this posting).

How can we create such navigation buttons using Flash CS4?

Hi,
How can we create such navigation buttons using Flash CS4 is in the following website? Please help me with any such tutorial to make my custom navigation bar/buttons.
http://city.reallusion.com/join.html
Thanks.

While the Note 4 is a reasonably large device it still falls into the phone layout bucket. We need this layout to function on very small screens some as low as 320 pixels high and 240 pixels wide. These sorts of devices don't have the space for a full toolbar.

How can I customize the navigation bar in Firefox 29? I would like to have the refresh/stop button back in front of the navigation bar!

How can I customize the navigation bar in Firefox 29? I would like to have the refresh/stop button back in front of the navigation bar!

There isn't a built in way to do that since all the navigation toolbars are on one toolbar.
You can restore this functionality by installing the Classic Theme Restorer add-on
*https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/

Print, Export and Page Navigation Buttons in the Report

When I view a report through CR4E, the generated report has 3 buttons namely Print, Export and Page Navigation buttons. But when I click on either of the buttons I get a 'null pointer exception'. This is a critical error as I am unable to navigate past the first page. Do I have to add code to these buttons? If not, why am I getting an error? Kindly solve my problem as soon as possible.

Looking at your code it appears that you are storing the ReportSource in session prior to passing in the ResultSet. This will create a problem when a postback is made on the viewer page (which all of the viewer actions do). If you look at the sample code which is generated when you use the JSP Page Wizard you will notice that the ResultSet is passed to the ReportClientDocument object prior to it being stored in session. Then, when the page is called again this object is retrieved and the ReportSource is used by the viewer. You can quickly run the test using one of our sample reports to see what I am talking about. The code below was generated using the Consolidated Balance Sheet.rpt and did not experience any problems doing any of the viewer actions.<%@page import="com.businessobjects.samples.JRCHelperSample, com.crystaldecisions.report.web.viewer.CrystalReportViewer, com.crystaldecisions.reports.sdk.ReportClientDocument, com.crystaldecisions.sdk.occa.report.application.OpenReportOptions, com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase, com.crystaldecisions.sdk.occa.report.reportsource.IReportSource, java.sql.Connection, java.sql.DriverManager, java.sql.ResultSet, java.sql.SQLException, java.sql.Statement"%><% try { String reportName = "Sample Reports/Consolidated Balance Sheet.rpt"; ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName); if (clientDoc == null) { clientDoc = new ReportClientDocument(); // Open report clientDoc.open(reportName, OpenReportOptions._openAsReadOnly); { // **** POPULATE MAIN REPORT **** { // Connection Info for fetching the resultSet String connectStr = "jdbc:derby:classpath:/Xtreme"; String driverName = "org.apache.derby.jdbc.EmbeddedDriver"; String userName = "dbuser"; // TODO: Fill in database user String password = "dbpassword"; // TODO: Fill in valid password String query = "SELECT CUSTOMER_NAME FROM APP.CUSTOMER WHERE COUNTRY = 'Australia'"; String tableAlias = "FINANCIALS"; // TODO: Change to correct table alias JRCHelperSample.passResultSet(clientDoc, fetchResultSet(driverName, connectStr, userName, password, query), tableAlias, ""); } } // Store the report document in session session.setAttribute(reportName, clientDoc); } { // Create the CrystalReportViewer object CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer(); // set the reportsource property of the viewer IReportSource reportSource = clientDoc.getReportSource(); crystalReportPageViewer.setReportSource(reportSource); // set viewer attributes crystalReportPageViewer.setOwnPage(true); crystalReportPageViewer.setOwnForm(true); // Process the report crystalReportPageViewer.processHttpRequest(request, response, application, null); } } catch (ReportSDKExceptionBase e) { out.println(e); } %><%! // Simple utility function for obtaining result sets that will be pushed into the report. // This is just standard querying of a Java result set and does NOT involve any // Crystal JRC SDK functions. private static ResultSet fetchResultSet(String driverName, String connectStr, String userName, String password, String query) throws SQLException, ClassNotFoundException { //Load JDBC driver for the database that will be queried Class.forName(driverName); Connection connection = DriverManager.getConnection(connectStr, userName, password); Statement statement = connection.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_READ_ONLY); //Execute query and return result sets return statement.executeQuery(query); }%>Try using the code generated from the wizard to see if it works for you as well. Regards, Sean Johnson (CR4E Product Manager)

Can't see the page navigation button in flash model?

Can't see the page navigation button in flash model? how to do it?
Thanks in advanced!

Hello Wei Liu,
For both WD and flash you have the following connectors: start, end, signal in, signal out, data store and user data.
In WD you have in addition navigate.
In flash you have popup signal and timer.
See also SAP Note No. 936547.
Best regards,
Shay

How to get access to my iCloud back up when setting up a new iPhone 5s which needs the newest version of iOS7 first?

how to get access to my iCloud back up when setting up a new iPhone 5s which needs the newest version of iOS7 first?

Set up the new phone as a new iPhone (without using your backup), then update it to the latest iOS (7.1.2). Then go to Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens again and when given the option, choose Restore from iCloud Backup and follow the prompts. This process is explained in more detail here: iCloud: Restore your iOS device from iCloud.

When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and sit next to the original? Mine is going to the end of the folder. Thanks Karen

When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and sit next to the original image? Mine is going back to the end of the folder. Thanks Karen

Hi Karen
You may the sort set to Custom. Click the dropdown menu on the toolbar (to the right of the word sort) and change to capture time.
If you can’t see the toolbar above the filmstrip press the T key. Press T again to hide.

How can I publish the alterations I have made to my iWeb pages when the ' Publish Site' button and 'Publish Site Changes' on the file dropdown are grey?

How can I publish the alterations I have made to my iWeb pages when the ' Publish Site' button and 'Publish Site Changes' on the file dropdown are grey?

this is a perfect question for the users in the iWeb forum. https://discussions.apple.com/community/ilife/iweb. Good luck.

I have a new iPhone 5S. While trying to learn about it, I accidentally recorded a voice memo with no content. I cannot now figure out how to get rid of it. There is a banner across the top of my phone with this memo which I don't want. Help!

I have a new iPhone 5S. While trying to learn about it, I accidentally recorded a voice memo with no content. I cannot now figure out how to get rid of it. There is a banner across the top of my phone with this memo which I don't want. I have deleted it from iTunes but cannot get it off the phone. Help!

The banner usually indicates that the memo is "Paused." If you go back into voice memos, touch the word "Done" beside the big red pause button, give it a name, then it will show in a list. Touch the memo in the list then touch the trash can icon that should appear.

Just upgraded iPhone 3GS to IOS5. Now there's 21GB of Others. How to get rid of it? It's taken up all the space on the phone.

Just upgraded iPhone 3GS to IOS5. Now in itunes I can see there's 21GB of Others. I have no idea what is that. I didnt have that before the upgrade. How to get rid of it? It's taken up all the space on the phone.

I posted a fix for this temporary issue earlier but here it is in short:
The memory "hog" that is "others" seems to be the OS as it's installing. It seems to want more than 12GB and you may get stuck at the point where iTunes tries to load everything back on and the iPhone has run out of space. What you need to to is un-check the "sync" box at the apps, music, podcasts and other sections, then click the button to sync iTunes with iPhone. This will result in iTunes deleting all the data it restored, but you'll put it back later. Once you caused the deletion of most of the data, iOS5 will resume installing and then "magically" shrink to less than 1GB. Then you can place check marks back in the boxes and re-sync all your apps and other data. You will have plenty or memory left.
I followed the above procedure and my iPhone works perfectly.
Hope this helps.

Can someone tell me how to get my side tool panel back?

I'm hoping someone can tell me how to get my side tool panel back. I'm using adobe elements 10.0. Everything was fine, then all of a sudden the side tool panel disappeared and my whole screen is covered with adobe elements workspace.
Hope you can help

oh! yes ,
It should be Shift + Ctrl + ALT on windows
and Shift + Command + Option on Mac

Page navigation buttons not working properly

Hi,
I am having a multilingual Java Application (e.g. English, Japanese, French...). In this application there are reports which display the data using locale parameter (like en_US, ja_JP etc.) to display the data in selected language.
The problem comes up when I see Japanese reports on English operating system machine and vice versa.
When I click any button of page navigation it changes the page number but does not load and display the page accordingly.
It's like when I run the report it displays the first page, then clicking on Next button brings 2 in navigation field but the report would still show first page, same happens for 3, 4.... all pages.
The other navigation buttons also do not work, they change the page number but display only the first page.
This problem does not occur when I see Japanese reports on Japanese OS machine and English reports on English OS machine.
However my clients need the first case, Japanese reports should work on English OS machine also.
Please advise urgenly.

Hi,
I resolved the above issue by removing the call to method setProductLocale in jsp file (which was really unnecessary in code as product locale is meant to set languange for crystal report design environment ).
Actually the problem was I had set locale at two place
1. using setLocale method of ReportClientDocument object) after the initialization of report client document object
2. using setProductLocale method of CrystalReportViewer object after the initialization of Crystal Report Viewer object
After commenting out code for setProductLocale, reports in all languages and all their functionalities started working 100% perfectly.
Thanks.

How to get tools and other bars back in view after deleting show-bar?

How to get tools and other bars back in view after deleting show-bar?

Hello Jouko.
You can go into View > Toolbars and select the ones you want to see. If you can't see the menu bar you can simply tab ALT on your keyboard (I think F10 works too) to show it.

How to get handle of a button that i created through Customisation?

How to get handle of a button that i created through Customisation?
I tried this in processformrequest ..failed :(
String str2 = paramOAPageContext.getParameter("AutoDialler");
if (str2 != null) {
System.out.println("Inside AutoDialler Hurray");
}

this works well
but can you give documentation support of whatever you are saying?
public void processRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
OASubmitButtonBean oasb= (OASubmitButtonBean)paramOAPageContext.getWebBeanFactory().createWebBean(paramOAPageContext,"BUTTON_SUBMIT");
oasb.setID("xxSubmitAutoDialler");
oasb.setUINodeName("xxSubmitAutoDialler");
oasb.setEvent("xxSubmitAutoDialler");
oasb.setText("xxSubmitAutoDialler");
paramOAWebBean.addIndexedChild(oasb);
public void processFormRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
if ( strEvent.equals("xxSubmitAutoDialler"))
//IMPORTANT Get this by calling the Function that loops for records.
System.out.println("Inside processFormRequest Hurray");
}

How to get the page navigation buttons back at the bottom of the page?

Similar Messages

Maybe you are looking for