How to get the SAVE Layout ICON on ALV Grid display report

Hi,
I am using the standard ALV Layout, and I do not get the SAVE LAYOUT Icon on the Menubar, where I could save the report Layout.I am using the layout routine as,
FORM layout_build USING   u_lf_layout TYPE slis_layout_alv.
u_lf_layout-box_fieldname       = 'SELK'. " Checkbox
u_lf_layout-zebra               = 'X'.
u_lf_layout-colwidth_optimize   = 'X'.
u_lf_layout-confirmation_prompt = 'X'.
u_lf_layout-get_selinfos        = 'X'.
u_lf_layout-f2code              = '&ETA' .
u_lf_layout-detail_titlebar     = 'Delivery Due List'.
u_lf_layout-key_hotspot         = 'X'.
u_lf_layout-info_fieldname      = 'COL'.
ENDFORM.                    " layout_build
Is there anything that I am missing. Please suggest.Many thanks for your help.
Regards,
Mira

Hi,
i think you've forgotten param. <b>i_save</b>
x_save = 'X'.
gs_variant-report     = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            I_STRUCTURE_NAME = 'ZTAB01'
            IS_VARIANT       = gs_variant
            IS_layout        = lay
            I_SAVE           = x_save
       TABLES
            T_OUTTAB         = gridtab
       EXCEPTIONS
            OTHERS           = 1.
regards Andreas

Similar Messages

How to devide the top of page in alv grid display

hi all
in the alv grid display am getting the page number and total number of pages in the left hand side
but what i need is i need in the right hand side
how to get that

Hi,
PLease refer to the code below:
*& Report ZDEMO_ALVGRID                                               *
*& Example of a simple ALV Grid Report                                 *
*& The basic requirement for this demo is to display a number of       *
*& fields from the EKKO table.                                         *
REPORT zdemo_alvgrid                 .
TABLES:     ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid,
      gt_events     type slis_t_event,
      gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
*       Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
*               I.e. Field type may be required in-order for
*                    the 'TOTAL' function to work.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
* fieldcatalog-do_sum      = 'X'.
* fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
*       Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
* gd_layout-totals_only        = 'X'.
* gd_layout-f2code            = 'DISP'. "Sets fcode for when double
*                                         "click(press f2)
* gd_layout-zebra             = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text       = 'helllllo'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
*       Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
            i_callback_user_command = 'USER_COMMAND'
*            i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
*            it_special_groups       = gd_tabgroup
            it_events               = gt_events
            is_print                = gd_prntparams
            i_save                  = 'X'
*            is_variant              = z_template
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
*       Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform.                    " DATA_RETRIEVAL
* Form TOP-OF-PAGE                                                 *
* ALV Report Header                                                 *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
      wa_header type slis_listheader,
      t_line like wa_header-info,
      ld_lines type i,
      ld_linesc(10) type c.
* Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
* Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
               sy-datum+4(2) '.'
               sy-datum(4) INTO wa_header-info.   "todays date
append wa_header to t_header.
clear: wa_header.
* Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
                    into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
*            i_logo             = 'Z_LOGO'.
endform.
*       FORM USER_COMMAND                                          *
*       --> R_UCOMM                                                *
*       --> RS_SELFIELD                                            *
FORM user_command USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
* Check function code
CASE r_ucomm.
    WHEN '&IC1'.
*   Check field clicked on within ALVgrid report
    IF rs_selfield-fieldname = 'EBELN'.
*     Read data table, using index of row user clicked on
      READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
*     Set parameter ID for transaction screen field
      SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
*     Sxecute transaction ME23N, and skip initial data entry screen
      CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
    ENDIF.
ENDCASE.
ENDFORM.
*&      Form BUILD_EVENTS
*       Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
       exporting
            i_list_type = 0
       importing
            et_events   = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
                           into ls_event.
if sy-subrc = 0.
    move 'END_OF_PAGE' to ls_event-form.
    append ls_event to gt_events.
endif.
    read table gt_events with key name = slis_ev_end_of_list
                           into ls_event.
if sy-subrc = 0.
    move 'END_OF_LIST' to ls_event-form.
    append ls_event to gt_events.
endif.
endform.                    " BUILD_EVENTS
*&      Form BUILD_PRINT_PARAMS
*       Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'.   "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform.                    " BUILD_PRINT_PARAMS
*&      Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*&      Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
Thanks,
Sriram Ponna.

How to get the 'hand' cursor on an ALV drill down report?

I have a drill down on PO # going to trans ME23N that is working great.
But I have noticed on my other drill downs (E.G for billing doc VF03) that when the report is displayed the drill down field value is a) underlined and b) has a 'Hand' appear when you place the cursor over the billing document field.
This does not happen on my PO # - it is not highlighted with an underscore, nor do you get the small hand - but it does work when you double click the field.
The field I am using on the ALV report is RSEG-EBELN. This is not a KEY field in the table - perhaps that is why it does not have the underscore and the 'hand'.
Thanks!
Scott

Here it is.
When you build your field cat use the below code.
DATA : x_fieldcat TYPE slis_fieldcat_alv.
* Single click on the field will trigger double click event.Also, a hand
* will appear when the cursor navigates to the field
X_FIELDCAT-HOTSPOT = 'X'.
Regards,
ARS

How to get the Save dialouge box in SAP Business One

Hi,
How to get the Save dialouge box in Button click event in SAP Business One.
Thanks,
Y.

Hello,
You would like to display an SaveFileDialog box?
may follow this thread, and you can find a sourcecode in vb.net and c# inside (for open dialog, but it is the similar...)
Regards
János

How to change the standard layout sets in ALV List

Hi Gurus,
How to change the standard layout sets in ALV list.
Is there any standard program ? or specific way to acheive this?
Kindly drop some clues?Every valuable clues rewarded more points........
Thanks in Advance,
Dharani

Hello Dharani
All required function modules can be found in function group SLVC (assuming that you are using OO-based ALV or, at least, fm REUSE_ALV_GRID_DISPLAY_LVC):
LVC_VARIANT_DEFAULT_GET (Read default display variant (description only, w/o field catalog))
LVC_VARIANT_EXISTENCE_CHECK
LVC_VARIANT_F4 (Display variant selection dialog box)
LVC_VARIANT_SELECT (Read a display variant)
For a sample report using LVC_VARIANT_DEFAULT_GET have a look at BCALV_GRID_10.
Regards,
Uwe

How to merge rows with similar values in alv grid display in webdynpro

Hi experts,
i want to know about how to merge rows with similar values in alv grid display of webdynpro.grouping rows is possible in table display in webdynpro but i am not able to do row grouping in the alv grid display in webdynpro.
kindly suggest.
thanks ,
Anita.

Hi Anita,
did you find a solution for this? I have opened a Thread, if you know the answer maybe you could help me out:
Is there an ALV function similar to the TABLE Row grouping?
Thanx in advanced!!!
Kind Regards,
Gerardo J

How to enable the SAVE LAYOUT button?

When using CALL METHOD G_ALVGRID_HDR->SET_TABLE_FOR_FIRST_DISPLAY, how do I enable the SAVE LAYOUT push button?
It shows the Change layout button but does not allow me to save the layout as the SAVE LAYOUT button is not available.
I am using the following code but it does not show the SAVE LAYOUT button.
CALL METHOD G_ALVGRID_HDR->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
      I_SAVE                        = L_SAVE
      IS_VARIANT                    = LS_VARIANT
      IS_LAYOUT                     = LS_LAYOUT
      IS_PRINT                      = LS_PRINT
      IT_TOOLBAR_EXCLUDING          = I_EXCLUDE
    CHANGING
      IT_SORT                       = I_SORT_HDR
      IT_OUTTAB                     = I_OUTTAB_HDR[]
      IT_FIELDCATALOG               = I_FCAT_HDR
    EXCEPTIONS
      INVALID_PARAMETER_COMBINATION = 1
      PROGRAM_ERROR                 = 2
      OTHERS                        = 3.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Pl advise.
Thanks,
Ven

pass the variant and enable is_save = 'A'.
in my case I had to upgrade the gui also.

How to get the page layouts programmatically and create a page for that pagelayout

how get the page layouts programmatically and create a page for that pagelayout and add webpart
please help me with da code.Thanks
adityadugyala

Hi if your page layouts alreday created then create new page programaticaaly and apply your page ayouts to that page by coding you can do something like following
PublishingWeb publishingWeb =
PublishingWeb.GetPublishingWeb(web);
PageLayout[] layouts = publishingWeb.GetAvailablePageLayouts();
PageLayout layout = layouts[0];
string pageName =
"MyPublishingPage5.aspx";
PublishingPage newPage = publishingWeb.GetPublishingPages().Add(newFolder.Folder.ServerRelativeUrl +
"/"+ pageName, layout);
newPageUrl = web.Url +"/" + newPage.Url;
newPage.Description = "This my sample publishing page";
newPage.Title = "My Publishing Page";
newPage.Update();
Please follow link
http://blogs.msdn.com/b/sowmyancs/archive/2008/03/15/create-publishing-pages-in-portal-sites-programmatically.aspx
Please mark answer , if you think answer is helpful or correct.

How to get the total number of pages printed in a report?

Hi All,
I have a requirement where I need to print a frame of fields only in the last page. Unfortunately I cannot use the 'Print Object On' property as it doesnt work in my case. So, I am planning to write a format trigger on the frame to return TRUE if the page is the last physical page. Now, I need to know how to get the total number of physical pages that will get printed in the report so that I can use this to manipulate the frame. I was planning to use the 'Total Physical Pages' built-in, but it seems like I can just use it to print in a field and I can't use this field's value anywhere in the plsql code (formula column function/format trigger) in the report. Is there anyway to get the total number of pages printed in the report which can be used in the report plsql code?
Thanks,
Srini.

i found the solution, thanks

How to get the variants for LAV LIST or GRID?

Hi,
How to get the variants which are stored in table like JVSO1, using function module REUSE_ALV_VARIANT_F4 ?
Thanks.

Hi,
Delcare
DATA : st_variant TYPE disvariant,       "Work area for variant
       st_variant1 TYPE disvariant.       "Work area for variant
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-041.
PARAMETERS :     p_varnt TYPE disvariant-variant MODIF ID md8. "Variant
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_varnt.
*--Local Variables
DATA: l_exit(1) TYPE c.                "ALV exit
*--Call the function module to display the list of Variants
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant    = st_variant
      i_save        = c_save
    IMPORTING
      e_exit        = l_exit
      es_variant    = st_variant1
    EXCEPTIONS
      not_found     = 1
      program_error = 2.
*--Check Subrc
IF sy-subrc <> 2 AND l_exit IS INITIAL.
    p_varnt = st_variant1-variant.
ENDIF.
start-of-selection.
IF NOT p_varnt IS INITIAL.
    CLEAR st_variant1.
    MOVE st_variant TO st_variant1.
    MOVE p_varnt TO st_variant1-variant.
*--Call the function module to check the variant exist
    CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
      EXPORTING
        i_save     = c_save
      CHANGING
        cs_variant = st_variant1.
    st_variant = st_variant1.
ENDIF.
DATA : lv_repid TYPE sy-repid.
*--Pass the Report name
lv_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program      = lv_repid
      it_fieldcat             = it_fcat
      is_variant              = st_variant
      it_events               = it_events
      i_save                  = 'A'
      i_callback_user_command = 'USER_COMMAND'
    TABLES
      t_outtab                = it_zsd_ra
    EXCEPTIONS
      program_error           = 1
      OTHERS                  = 2.
IF sy-subrc <> 0.
    MESSAGE e368(00) WITH 'Alv Display failed'(044) .
ENDIF.
regards,
Prashant

In ME2N report for PO- How to get or add Vendor name in ALV grid output

Hl Everyone
How to get or add Vendor Name and payment terms in the ALV grid output for the follwing reports like ME2N and ME2V.
cuurently i am in 4.7 E version.
Kindly suggest..........
thanks in advance
Regards
Prashanth

Hi Pankaj
I knew that vendor name field is avaiable in ECC versions, but how to get the same field(vendor name) in 4.7 E vesion.
Kindly suggest
Regards
Prashanth

How to add the REFRESH button in OOPs ALV grid

how to add the REFRESH button in OOPs ALV grid

Hi Naidu.
Check the below code:
Local Class Definition and implementation For events handeling
CLASS LCL_EVENT DEFINITION .
PUBLIC SECTION.
    METHODS :TOOLBAR FOR EVENT TOOLBAR OF CL_GUI_ALV_GRID
                     IMPORTING E_OBJECT,
             USER_COMMAND FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
                     IMPORTING E_UCOMM.
ENDCLASS.
CLASS LCL_EVENT IMPLEMENTATION.
METHOD TOOLBAR.
    WA_TOOL-FUNCTION = 'ZFC1'.
    WA_TOOL-TEXT     = 'TEST'.
    WA_TOOL-ICON     = '@EA@'.
    APPEND WA_TOOL TO E_OBJECT->MT_TOOLBAR.
ENDMETHOD.             "DISPLAY
METHOD USER_COMMAND.
    IF E_UCOMM = 'ZFC1'.
          ENDIF.
ENDMETHOD.                    "USER_COMMAND
ENDCLASS.                    "LCL_EVENT IMPLEMENTATION
MODULE STATUS_0200 OUTPUT.
SET PF-STATUS 'ZALV_BTON'.
SELECT * FROM VBAK INTO TABLE GT_VBAK
           UP TO 30 ROWS.
**** CREATE CONTAINER OBJECT
CREATE OBJECT MY_CONTAINER
    EXPORTING
      CONTAINER_NAME              = 'CC1'
     EXCEPTIONS
      CNTL_ERROR                  = 1
      CNTL_SYSTEM_ERROR           = 2
      CREATE_ERROR                = 3
      LIFETIME_ERROR              = 4
      LIFETIME_DYNPRO_DYNPRO_LINK = 5
      OTHERS                      = 6 .
****** GRID TO CONTAINER
CREATE OBJECT ALV
      EXPORTING
      I_PARENT          = MY_CONTAINER
     EXCEPTIONS
      ERROR_CNTL_CREATE = 1
      ERROR_CNTL_INIT   = 2
      ERROR_CNTL_LINK   = 3
      ERROR_DP_CREATE   = 4
      OTHERS            = 5.
CREATE OBJECT OBJ.
SET HANDLER : OBJ->TOOLBAR FOR ALV.
SET HANDLER : OBJ->USER_COMMAND FOR ALV.
****** ALV DISPLAY
CALL METHOD ALV->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
      I_STRUCTURE_NAME              = 'VBAK'
    CHANGING
      IT_OUTTAB                     = GT_VBAK[]
    EXCEPTIONS
      INVALID_PARAMETER_COMBINATION = 1
      PROGRAM_ERROR                 = 2
      TOO_MANY_LINES                = 3
      OTHERS                        = 4.
ENDMODULE.                 " STATUS_0200 OUTPUT
*&      Module USER_COMMAND_0200 INPUT
*       text
MODULE USER_COMMAND_0200 INPUT.
IF SY-UCOMM EQ 'BACK'.
    LEAVE PROGRAM.
ENDIF.
ENDMODULE.                 " USER_COMMAND_0200 INPUT
Regards
Kumar M

Disabling "Default layout setting" in ALV grid display

Hello,
   We have a requirement where we need to disable layout default settings in ALV grid display.
   Only certain users should be able to save the report layout as default.
   We would be creating an authorization group for this and then based on the Authority check we would need to enable or disable Default layout save option.
I found that using I_SAVE in the FM "REUSE_ALV_GRID_DISPLAY", we can either enable or disable layout save option.
But our requirement is to disable Default layout save option based on the authority check.
We will find this option next to User specific option when we save the report layout.
Can anyone guide me on this?
Thanks,
Regards,
Anid

Hi Anid,
First of all check if you can do this excluding the buttons from the ALV with the excluding tab. If not, here is the code for the ALV OO to exclude the buttons.
FORM F_DISPLAY_ALV.
* Layout
PERFORM f_layout.
* Exclude Buttons
DATA: gt_excl           TYPE ttb_button
REFRESH gt_excl.
* Append those you want to exclude. These are some of them. Check Class in SE24 -> Atributes of class cl_gui_alv_grid.
APPEND: cl_gui_alv_grid=>mc_fc_loc_cut            TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_undo           TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_copy           TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_paste          TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_copy_row       TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_move_row       TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_delete_row     TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_insert_row     TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_append_row     TO gt_excl,
        cl_gui_alv_grid=>mc_fc_loc_paste_new_row TO gt_excl,
        cl_gui_alv_grid=>mc_fc_to_office          TO gt_excl,
        cl_gui_alv_grid=>mc_fc_expcrdesig         TO gt_excl.
CALL METHOD gv_alv_grid->set_table_for_first_display
    EXPORTING
      it_toolbar_excluding       = gt_excl[]
      is_layout                     = wa_layout_main
      is_variant                    = wa_variant
      i_save                        = 'A'
    CHANGING
      it_outtab                     = gt_alv[]
      it_fieldcatalog               = gt_fieldcat[]
      it_sort                       = gt_sort[].
Edited by: Ernesto Caballero on Mar 11, 2010 5:59 PM
Edited by: Ernesto Caballero on Mar 11, 2010 6:03 PM

Anyone know how to get the downloads folder icon to appear in the dock?

I accidentally dragged the downloads icon out of the dock and I can't figure out how to get it back there. Any suggestions? thanks!

Sometimes you have to be a bit "forceful" with your drag, especially if the Dock is at the bottom--almost as if you are dragging the folder thru the Dock and off the bottom edge of the monitor.
Francine
Francine
Schwieder

How can I get the selected rows from two ALV grids at the same time?

I have a program that uses two ALV grids in one dialog screen. I'm using the OO ALV model (SALV* classes).
The user can select any number of rows from each grid. Then, when a toolbar pushbutton is pressed, I'd have to retrieve the selected rows from both grids and start some processing with these rows.
It is no problem to assign event handlers to both grids, and use the CL_SALV_TABLE->GET_SELECTIONS and CL_SALV_SELECTIONS->GET_SELECTED_ROWS methods to find out which rows were marked by the user. Trouble is, this only works when I raise an event in each grid separately, for instance via an own function that I added to the grid's toolbar. So, I can only see the selected rows of the same grid where such an event was raised.
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.
As it is right now, I can have an own button in both grid's toolbar, select the rows, click on the extra button in each grid (this will tell me what entries were selected per grid). Then, I'd have to click on a third button (the one in the dialog screen's toolbar), and process the selected rows from both grids.
How can I select the rows, then click on just one button, and process the marked entries from both grids?
Is it somehow possible to raise an event belonging to each grid programmatically, so that then the corresponding CL_SALV_SELECTIONS->GET_SELECTED_ROWS will work?
Thanks.

Hello Tamas ,
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.--->
is it possible to have a check box in each grid & get the selected lines in PAI of the screen ?
regards
prabhu

How to get the SAVE Layout ICON on ALV Grid display report

Similar Messages

Maybe you are looking for