How to get the Time Stamp if we use User Status
Hi Gurus,
We used User Status to control several Orders. Now we are required to get the "time stamp" when we change from one status to another, is that information available in the system?
If not, how do we get the time when a user status is changed from one to another?
please advice,
Hi,
To check such kind of changes you have to follow below path,
Go to Status tab (Blue Ikon) --- >Extra -> Change Documents-> All- --- > Choose All Changes
SAP note 390635 provide the possibility to write change records for process and production orders as modification.
please refer this link also,
[Link|https://www.sdn.sap.com/irj/sdn/profile?userid=3781605]
Regards,
R.Brahmankar
Similar Messages
-
How do I get the time stamp on photo?
How do I get the time stamp on photo? Someone texted me a few pics and it does not show date taken in iphoto. How can I find this. They were taken with a iphone. Thx
Here's a screenshot of what Keith is referring to:
Note the cursor over the date which brings up the 3 important dates for the photo.
OT -
How to find the time stamp for delata
Hi Analysts,
I am loading data from R/3 to InfoProvider(Cube or ODS) with delta update.
I have seen nodata was loaded to InfoProvider. But data was available at DataSource. then new delta is started. i want to load the last delta again.
How to see the time stamp of delta?
How to load that delta data?
Please help me in this need.
Hari.Dear Srihari,
if your last delta failed then you can request it again by calling the same delta infopackage again, it will ask for repeat delta (in case last delta has failed), go and run it.
this way you can have your delta figurs back, and do upload via PSA.
Hope it helps. -
How to get the time interveral for each status of worklow (wating,Inprocess
Hi Friends,
I have requreiemnt to get the time interval for each status of workflow.
ex.
status
workflow id | startd date | enddate | waiting | Inprocessing|Error|......
1026 10.10.2008 25.10.2008 1hr 1hr 30 min 2 hr
Please do give me idea how to get the time stam of each status of workflow.
Thanks,
D.prabhuHi,
I think the following tables would be helpful to you:-
SWW_CONT Container Contents for Work Item Data Container
SWW_CONTOB "Container Cont. for Work Item Data Container (Only Objects)"
SWWLOGHIST History of a work item
SWWORGTASK Assignment of WIs to Org.Units and Tasks
SWWUSERWI Current Work Items Assigned to a User
SWWWIHEAD Header Table for all Work Item Types
Hope it Helps!
Regards,
Kanika -
How to get the intersection of two arraylist containing user defined obj??
How to get the intersection of two arraylist containing user defined obj??
I can easily get the intersection of two array list which containing some simple class(Integer, String). But how to get the intersection of two arrayList which contain user defined object?
Here is the sample code..I can not run this out...anybody can help me? thank you very much..
The correct result should be like this:
2
2
but I can only get this:
2
0
import java.util.*;
public class testRetain{
public static void main(String[] args){
ArrayList a = new ArrayList();
ArrayList b = new ArrayList();
a.add( new dog(1,2,2) );
a.add( new dog(1,2,1) );
System.out.println(a.size() );
b.add( new dog(1,2,2) );
a.retainAll(b);
System.out.println(a.size() );
class dog implements Comparable{
int head;
int arms;
int legs;
dog(int head, int arms, int legs){
this.head = head;
this.arms = arms;
this.legs = legs;
public int compareTo(Object o){
if ( ((dog)o).head > this.head )
return -1;
else if ( ((dog)o).head < this.head )
return 1;
else
return 0;
}@Op. Your classes should override equals and hashCode
Kaj -
How 2 get the path of a file Using jsp
how 2 get the path of a file Using jsp
i have tried getPath...but i'm geting the error
The method getPath(String) is undefined for the type HttpServletRequest
any idea how 2 get the path of a fileYou need ServletContext#getRealPath().
API documentation: http://java.sun.com/javaee/5/docs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String) -
How to get the form name which is used in standard tcode like me23n in sap
how to get the form name which is used in standard tcode like me23n in sap
Moderator message: four out of four threads locked, please read and understand the following before posting further:
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 18, 2011 1:32 PMhow to get the form name which is used in standard tcode like me23n in sap
Moderator message: four out of four threads locked, please read and understand the following before posting further:
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM -
Where can i get the time stamp in Messaging Multiplexor's log?
i have modify the loglevel to 10,but i can only find the date informatioin in mmp's log like this:
20060317 000000 PopProxyAService.cfg (sid 0xd100c4) USER login
which is the "time" stamp and what's it means?
i have read the Administration Guide/Reference,but didn't find session abt it.
where can i get some documents abt how to read the mmp's log file?
thx!bash-2.05# tail -2 /mypath/PopProxy_20060317.log
20060317 052425 PopProxyAService.cfg (sid 0x6a2044) 12 C->S bytes, 34 S->C bytes in 0 seconds
20060317 052425 PopProxyAService.cfg (sid 0x6a2044) session end
bash-2.05# date
Fri Mar 17 13:24:26 CST 2006but 52425/3600=14.6h=14:36
that's different, i don't know the reason. does sth. wrong with my mmp?
thx in advance!
btw:you are respect because i found lots of result which anwsered by "jay_pleaset" during my search. -
How to display the time stamp in a data log table
Hello,
I want to display data during the data acquisition process. How do I add the time stamp as one of the column in the 'Result Table' located at bottom left of the example code?
Thanks,
Ryan
Solved!
Go to Solution.
Attachments:
Cycle Analysis.vi 229 KBI inserted the portion you added to my program and it worked but not exactly the way I want. It added the time and date when I start the data acquision. But I want the time stamp to be shown on every single row. Please see attached image.Thanks.
Attachments:
Result.JPG 54 KB -
I am not able to solve the problem because I can't find an I/O vi that writes on file time stamp data. An error occurs, because of connecting different data types. How can I convert time stamp data so that I can use it as input in a write on file vi? Please, help me!
The problem with the selection seems to be that you are using two different indexing tunnels on the for loop. One of them loops over every value of the first incoming waveform, the other one over all waveforms in the incoming array. The value you wire to the N terminal will be ignored, the number of loop executions will be the minimum of your indexes. Anyway, the loop doesn't seem to do what you wanted:
- If you want to store the complete waveform: loop over all waveforms, check for the maximum of each of them and write it just like you do now.
- If you want to store only the values of each waveform that actually exceeded the threshold: You can either use 2 nested for loops to iterate over each value of each waveform. Use shift registers t
o create new arrays of timestamps / values for the values you want to store. You need to either convert the waveform to x-y-pairs (VI on analog waveform palette) or calculate your own timestamps. You might as well want to check out the "Search waveform" VI. Configure it so that value+-tolerance covers the band between your expected minimum value and your threshold value. The VI will give you the indices and timestamps of all fits. -
HOW CAN I GET THE TIME IN EXCEL SHEET USING WRITE TO MEASUREMENT INSTRUCTION
HI, I am using GET TIME IN SECONDS ,and after that i placed SECONDS TO DATE /TIME instruction ,and i had taken a write to measurement file instruction
to get the time in excel sheet. Now i am not able to connect write to measurement source to seconds to date and time output . Is there any solution.
I am attaching my VI file also.
Attachments:
TEST.vi 43 KBHi
Im using Labview 8.2. Currently it just shows the data without the time. Im not sure what to do. It works perfectly though. I just want the time to appear on my notepad along with my data
holla
Attachments:
Testing1.txt 1 KB
Untitled 231_LV80.vi 23 KB -
How to get the time difference (in seconds) between two timestamp fields?
Hi All,
I'm exploring validation expressions in SAP MDM Data Manager version 7.1.07.245
I have two timestamp fields, suppose Update Date and Update-GDS.
What I'm trying to do is prompt a warning when:
(Update Date minus Update-GDS) is greater than or equal to zero seconds
AND
(Update Date minus Update-GDS) is less than or equal to 900 seconds
the bottomline is, Update Date must be equal or greater than to Update-GDS but Update Date must not exceed 900 seconds difference.
my initial try was:
(Update Date - Update-GDS)>=0 s AND (Update Date - Update-GDS)<=900 s
But it always returns true even the time difference between update date and update-gds is beyond the condition.
Can you please guide me through this?
Thank you very much in advance.
Regards,
~erwinHi Abhishek,
I tried your code but it always returns true.
It seems subtraction of timestamp fields do not actually get the time difference... (in seconds)
Is this possible anyway? Or is there any other better approach on this?
Thanks,
~erwin
Edited by: erwin.j.rivera on Dec 14, 2011 8:40 AM -
How to get the time length from send record command to record video really?
I have two buttons. Record/Stop
I press Record button to record the video and press Stop
button to stop recording.Now,I spend 1986 ms from press Record
button to press Stop button.
But the flv file's length is 1920 or 1910 or 1915 ms.
So I want to get the time length from send record command to
record video really.
Can you give me some suggests.
Thanks!maybe you have lag in publishing.... are you try watch de
NetStream.liveDelay() method?
or start counting when NetStream.onStatus has
"NetStream.Record.Start" and "NetStream.Record.Stop" in information
objects.... -
How to get the URL of an iView using AbstractPortalComponent
Hi All,
I need to get the URL of an iView using AbstractPortalComponent using the following code.
But i am unable to open the URL from the Browser
This is the following code snippet
public class AbsClass extends AbstractPortalComponent
public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
IPortalComponentURI componentURI = request.createPortalComponentURI();
componentURI.setContextName("pcd:portal_content/LOG_Viewer/LogViewer");
String URI=componentURI.toString();
response.write(URI);
The output i got from the browser is:
/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fLOG_Viewer!2fLogViewer
Actual Path: pcd:portal_content/LOG_Viewer/LogViewer
Output Path: /irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fLOG_Viewer!2fLogViewer
Why some extra numerics are embeded in the output path when compare with the Actual Path.
Can any one send me the modified code and your suggestions, how to achieve this problem.
Regards
PhaniHi,
Now i need to get the URL of this component.
IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
IPortalComponentURI componentURI = request.createPortalComponentURi();
componentURI.setContextName("com.sap.portal.appintegrator.sap.bwc.Transaction");
String URI=componentURI.toString();
response.write(URI);
I export this component into Portal and i tested with an iView based on this par file, i got the URL in the Preview.
But when i tried to run this URL by adding the http://<IPADDRESS>:<PORTNO>+URL
I am facing one AccessDenied Exception for this Object. ( USER/GUEST)
Is there any security zone, or other Permissions Problem, if so can you plz guide me what are the settings i have to change inorder to resolve this exception
Regards
Phani -
How to get the values of an Array using JSP Tags
Hey guys,
I need some help. I've splited a String using
fn:split(String, delim) where String = "1,2,3,4" and delim is ,
This method returns an Array of splited Strings. how do i get the values from this array using jsp tags. I don't wanna put java code to achive that.
Any help would be highly appreciated
ThanksThe JSTL forEach tag.
In fact if all you want to do is iterate over the comma separated list, the forEach tag supports that without having to use the split function.
<c:set var="list" value="1,2,3,4"/>
<c:forEach var="num" items="${list}">
<c:out value="${num}"/>
</c:forEach>The c:forTokens method will let you do this with delimiters other than a comma, but the forEach tag works well just with the comma-delimited string.
Maybe you are looking for
-
Delegate permissions to edit only certain settings in a GPO?
We are running a 2008R2 domain. I know this is doubtful, but thought I would ask. We have lots of drive mappings through a single GPO(mapping is through GPP). I would like to delegate the editing of those drive mappings to help-desk user. That is ea
-
Adobe Flash Builder 4.7 code coverage plugin
Hi, I am trying to find the code coverage with the adobe flash builder 4.7, SDK 4.6, code coverage plugin, i followed and cross verified the following steps: Debug version of Flash Player SWF file that has been compiled in debug mode The preload
-
Noob here. I'm using LR5 from the CC. I recently (days ago) had to reload all my RAW files from external media. Back when they were originally ADDed to LR, they had been renamed externally. The newly reloaded photos have the original camera filenames
-
Can't connect to MySQL from Flex
Hi, I just started learning Flex a week ago and I'm still a noob in this area. I recently discovered about Cairngorm and tried to understand it. I managed to understand the Cairngorm diagram and applied that in my "Login" function. My problem is when
-
Bug report : in Contact app,people's Chinese name cannot ...
in Contact app,people's Chinese name cannot be reached by clicking the alphabeta letter listed on right side of screen.