How to get the workitem

hi ,
im using the task to trigger work item to a person and scheduled a deadline. but suddenly my connection to the server has lost.
again i have opened my inbox i could not be able to have the workitem in my inbox.
but the deadline is already triggered to another person regarding this work item.
in this case how to get the workitem in my inbox?
how these kind of scenarios are being handled ?
Raghu

You can check which are the workflow you have started from
SBWP->OUTBOX ->Started Workflows. There you will get the workflow and check this from the Workflow log by hitting the Wflow Log button.
Thanks
Arghadip

Similar Messages

How to get the WorkItem-ID in mapping.

Hi All,
   I have developed a BPM scenario ( R/3 proxy --> XI BPM --- >   FTP )... in the runtime, the work item it will be generated.
My requirement is the file name should be in the work item ID (I know how to set the file name dynamically in the mapping)... but here my problem is to get the workitem ID...
any idea
Edited by: Dhanabal Thangavel on Aug 25, 2009 3:33 PM

Thank you very much for your quick response
Please guide me to complete this
1. I have created parameter type DYNPRO in SWFVISU transaction and i have created a application parameter in my webdnypro
     application also even though i cannot get the workitem id in to my default method of my WD component window
     So could you please send us any document links regarding this issue
Thank you,
Harsha p

How to get the workitem at runtime

Hi
I have a web dynpro application from where a workflow will be started based on an event. I want to retrieve the workitem ID. How to retrive it?
As per the Forums answers, I am currently using SAP_WAPI_WORKITEMS_TO_OBJECT function module to get the workitem ID
Please help me
Thanks
Gopal

Hi,
You can refer the below thread.
[Re: Completion of workitem for webdynpro abap application;
links:
[Re: Completion of workitem for webdynpro abap application;
Regards,
Priya

How to get the workitem id from UWL

HI All,
           I have developed a workflow and   starting this workflow from webdynpro abap.I integrated that task in SWFVISU
transaction to trigger the webdynpro from UWL up to now its working fine.
but now the problem is i need to get the WI_ID of the particular workitem (which i clicked on UWL to trigger my webdynpro application).
Thank you,
Harsha P

Thank you very much for your quick response
Please guide me to complete this
1. I have created parameter type DYNPRO in SWFVISU transaction and i have created a application parameter in my webdnypro
     application also even though i cannot get the workitem id in to my default method of my WD component window
     So could you please send us any document links regarding this issue
Thank you,
Harsha p

How to Get the Current Workitem id at runtime

Hi All,
I have a scenario, where request pending with a user who has already resigned the organization. The requirement is that we need to provide a report
of the request and with whom it is pending with along with the workitem id with a forward push button.
So that if the user identifies that a request is pending with someone he can click the record and press for the forward button and a pop-up to be showed where he can enter the userid to whom he needs to forward it.
In this scenario can anyone tell me how to get the current workitem id at run time and to save it to a custom table.
I tried with method before workitem execution, but here i am not getting the current workitem id.
Can you please suggest a good solution for this.
Thanks and Regards,
Balaji

Karri,
I think i can explain you with an example.
Here is my Scenario.
A user has raised a Gate pass and it went to all approval's and got approved and the material is also sent out from the plant. Lets take the date as 1.1.2013 (A Warehouse person have done the checking and sent out of the plant).
On 1.3.2013 some of the material has been returned and a material inward request has been raised and now the warehouse person has to do a inward checking and to sent it back for the initiator for the approval, but the warehouse person has resigned the organization on 1.2.2013, now the workitem is pending with the warehouse person who has already resigned.
My scenario is once the material inward request is created and before the workitem is delivered to the warehouse person i need to get the workitem id and to store the workitem some where.
So that in future if any warehouse dept head wants to forward the workitem which are lying in the person inbox who has already resigned he can do it via a report using this workitem id.
So, can anyone help how to get the dialog workitem id before the workitem creation or execution. I tried with "method before workitem execution" but my break point is not triggering at this point.
Thanks and Regards,
Balaji

How to get the image stored in archieve link as an attachment in work item.

Hi All,
through transaction OAWD we are storing scanned images.
Once this transaction is executed a workitem appears in the inbox of the initiator with the scanned invoice as attachment.
When the user executes the work item FV60 screen is displayed where the user enters the data based on the scanned invoice attachment.
After the user Parks the document the custom workflow triggers and a workitem appears in the inbox of an approver.
Our requirement is that the scanned image should also appear as the attachment.
Can you please suggest how to get the image stored in archieve link as an attachment in work item.
Regards
Shraddha

Hi Martin,
with every parked document a scanned image is linked.
I need to create a link under objects and attachments in the work item, such that when the user clicks that link the image is displayed.
At present the following functionality is available.
The BO used is FIPP
Objects and attachments:
parkeddocument:AK0108500001252008.(via FIPP binding with WIOBJECT_ID)
On clicking the link below objects and attachments: the parked document AK0108500001252008 opens in display mode.
Now we want to have 2 links:
parkeddocument:AK0108500001252008.
image.
When we click on the link image then the scanned invoice linked to the document should get opened.
I am able to get the image id of the the image through SAP_WAPI_GET__OBJECTS,
export parameter leading_object provides the detail.
But I am not able to figure out how to use it in my workflow to display it as an attachment.
Hope this will give a better understanding of my question.
can you please suggest as to how I should proceed with it.

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

How to get the table of value field? and can we expand the technical limits

Dear
I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
We have a note for R.4.x Please see below:
OSS note 160892
You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
David Sun
Regards!

how to extend the limit of value numbers? please see the original question.

I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.

How to get the value from a JavaScript and send the same to Java file?

Hi.
How to get the value from a JavaScript (this JS is called when an action invoked) and send the value from the JS to a Java file?
Thanks and regards,
Leslie V

Yes, I am trying with web application.
In the below code, a variable 'message' carries the needed info. I would like to send this 'message' variable with the 'request'.
How to send this 'message' with and to the 'request'?
Thanks for the help :-)
The actual JS code is:
function productdeselection()
var i=0;
var j=0;
var deselectedproduct = new Array(5);
var message = "Are you sure to delete Product ";
mvi=document.forms[0].MVI;
mei=document.forms[0].MEI;
lpi=document.forms[0].LPI;
if(null != mvi)
++i;
if(null != mei )
++i;
if(null != lpi)
++i;
if(null != mvi && mvi.checked)
deselectedproduct[++j]="MVI?";
if(null != mei && mei.checked)
deselectedproduct[++j]="GAP?";
if(null != lpi && lpi.checked)
deselectedproduct[++j]="LPI?";
if( 0!=j)
if(i!=j)
for (x=0; x<deselectedproduct.length; x++)
if(null != deselectedproduct[x])
message =message+ "-" +deselectedproduct[x];
alert(message);
else
//alert(" You cannot remove all products!");
return false;
return true;
}

How to get the value from databank

Hi,
How to get the value from databank? and how to set the same value to visual script object?
thanks,
ra

Hi,
You can use GetDatabankValue(HeaderName, Value) to get the value from databank and SetDataBankValue(HeaderName, Value) to set the value to databank.
You can refer to the API Reference to see list of associated functions and techniques we can use with related to Data Bank.
This is the for OFT but if you are using Open Script then you have direct access for getting the databank value but when it comes to setting a value you have to use File operation and write you own methods to do the set operation.
Thanks
Edited by: Openscript User 100 on Nov 13, 2009 7:01 AM

How to get the value from the readonly field?????

Hi All,
I have a readonly field in JSF. in action class i want to get the value of that field.
How to get the readonly field value???
i am getting null if the field is readonly.
i am getting value if the field is not readonly.

I might have a problem similar to yours. Refer to the post I made entitled "Readonly and Disabled Fields Losing State Between Submits".

How to get the value from Advanced table

Hi,
In the Advanced table have 2 LOV fields, I need LOV field value dynamically in the controller to validate the save button, if iam not selected any value in lov save button will not allow to save the data. In the table i am using 'Add another row'. How to get the lov field value in the process form request??? and how to do this requirement
Thanks
Naresh

1. You can specify required property on LOV field to "yes". For events where you wish to disable the client side validations, set the property disable client side validation to "true".
2. If above behavior is not what you are looking for, then you need to handle in AM and not CO.
a. Call an AM method from CO.
b. In that AM method, get handle of VO.
c. Iterate the VO Rows and check for your validation rules.
-Prince
http://www.princekapoor82.blogspot.com

How to get the values from html:select? tag..?

i tried with this, but its not working...
<html:select styleClass="text" name="querydefs" property="shortcut"
             onchange="retrieveOptions()" styleId="firstBox" indexed="true">
<html:options collection="advanced.choices" property="shortcut" labelProperty="label" />
</html:select>
                    <td align="left" class="rowcolor1">
                    <script language="javascript" type="text/javascript">
                          function retrieveOptions(){
                         var sel = document.querydefs.options;
                         var selectedOption = sel[sel.selectedIndex].value;
                         document.write(selectedOption);
                       </script>

<td align="left" class="rowcolor1">
                    <script language="javascript" type="text/javascript">
                          function retrieveOptions(){
                         var sel = document.querydefs.options;
                         var selectedOption = sel[sel.selectedIndex].value;
                         document.write(selectedOption);
                       </script>This java script is not working at all..its not printing anything in document.write();
This is code..
<td class="rowcolor1" width="20%">
<html:select styleClass="text" name="querydefs" property="shortcut"
                         onchange="retrieveSecondOptions()" styleId="firstBox"
                         indexed="true">
                         <html:options collection="advanced.choices" property="shortcut"
                              labelProperty="label" />
                    </html:select>i tried with this also. but no use..i'm not the getting the seleced option...
function retrieveOptions(){
firstBox = document.getElementById('firstBox');
                         if(firstBox.selectedIndex==0){
      return;
    selectedOption = firstBox.options[firstBox.selectedIndex].value;
}actually , how to get the values from <html:select> ...?
my idea is to know which value is selected from the combo box(<html:select> ) if that value is equal some string i have enable a hyperlink to open a popup window

How to get the values from fileds

Dear All,
Good Afternoon,
I want to set the 0 value to the fields at the time of page loading.
For this,
i tried the following ways
pageContext.putParameter("fieldid",0);
and
OAMessageTextInputBean bean1=(OAMessageTextInputBean) webBean.findChildRecurssive("fieldid");
bean1.setValue(pageContext,0)
for getting the values i used
String id=pageContext.getParameter("fieldid");
but i returns null values only while it has 0 value.
how can get the 0 value from that field

Hi,
In order to set values you should use:
OAMessageTextInputBean bean1=(OAMessageTextInputBean) webBean.findChildRecurssive("fieldid");
if(bean1!=null)
bean1.setText("0");
and in order to grab the values from the fields
String id=(String)pageContext.getParameter("fieldid");
Thanks,
Gaurav

How to get the workitem

Similar Messages

Maybe you are looking for