How to get unicode string through NCO 3.x ?

Environment: ECC 6.0 Unicode
Console.Wirte ( table.GetString("MAKTX") );
This result will be more incorrect encoding ("question mark" ).
how to fixed?

Maybe you can help me now?
I have a iPhone 1/8 inch microphone adapter - 3.5mm 4 conductor TRRS Male to 3.5mm Microphone Input Jack from here. that allows me to plug my lapel mic directly into my iphone and record, it is great.
I was hoping I could also use it on my MBPRetina to accomplish the same purpose. Do you know if that is possible? I tried and tested it recording a video in iMovie, and didn't notice any change.
I went to the Sound Input Preferences, and do not notice the mic input changing when I plug it in or remove it. In other words, it always says "internal mic."
My lapel mic is battery operated, with a fresh battery, and it was turned on.
What am I doing incorrectly? Any help would be wonderfully appreciated!

Similar Messages

How to get customised reports through Flexible Analysis available in PMIS

Dear Sir,
Please guide us how to get customised reports through Flexible Analysis available in PMIS.
Thanks & Regards,
PM Team

[Sap Help|http://help.sap.com/erp2005_ehp_04/helpdata/en/c1/375e9c449a11d188fe0000e8322f96/frameset.htm].
Regards
Narasimhan

How to get a string "yyyyMMdd" into date like MM/dd/yyyy?.

Hi
How to get a string "yyyyMMdd" into date like MM/dd/yyyy?. i have used
SimpleDateFormat.parse but it is giving long value. i want to disply the date
like MM/dd/yyyy
thank you

Do you want the string rearranged or do you want to create an instance of some form of Date class?
If you want to rearrange the string you could just do it yourself provided you know the date string is going to be of the format yyyyMMdd.
something like this:
String newDate = origStr.charAt(4) + origStr.charAt(5) + "/" + origStr.charAt(6) + origStr.charAt(7) + "/" ...etc.

How to get alternative strings in list of strings.

Hi experts,
how to get alternative strings in list of strings.
eg
'country1, italy, country2, india, country3, paris, country4, scottland, country5, rome'
from the above list i need to fetch all the countries and their names separately.
like country1, country2, country3, country4, country5
italy, india, paris, scottland, rome
i am trying the above one in the below fashion
SELECT SUBSTR
          ('country1, italy, country2, india, country3, paris, country4, scottland, country5, rome',
           1,
             INSTR
                ('country1, italy, country2, india, country3, paris, country4, scottland, country5, rome',
                 1,
                 1
           - 1
FROM DUAL
can you please any one help me

If you want the data to be more stuctured, and useful:
col col_name for a20
col col_value for a20
var inlist VARCHAR2(2000)
exec :inlist := 'country1, italy, country2, india, country3, paris, country4, scottland, country5, rome';
exec :inlist := replace(:inlist,' ')
select max(decode(mod(lvl,2),1,value)) col_name
      ,max(decode(mod(lvl,2),0,value)) col_value
from   (select substr(:InList,start_pos+1, end_pos-start_pos-1) value
              ,lvl
        from   (select :InList
                      ,case when level = 1 then
                         0
                       else
                         instr(:InList,',',1,level-1)
                       end start_pos
                       ,case when instr(:InList,',',1,level) = 0
                         then length(:InList)+1
                       else
                         instr(:InList,',',1,level)
                       end   end_pos
                     ,level lvl
                from   dual
                connect by level <=length(:InList)-length(replace(:InList,','))+1
group by ceil(lvl/2)
order by 1;
COL_NAME             COL_VALUE
country1             italy
country2             india
country3             paris
country4             scottland
country5             rome
Untested on 10g
Then you could stragg the rows together ...

How to get a string or byte array representation of an Image/BufferedImage?

I have a java.awt.Image object that I want to transfer to a server application (.NET) through a http post request.
To do that I would like to encode the Image to jpeg format and convert it to a string or byte array to be able to send it in a way that the receiver application (.NET) could handle. So, I've tried to do like this.
private void send(Image image) {
    int width = image.getWidth(null);
    int height = image.getHeight(null);
    try {
        BufferedImage buffImage = new BufferedImage(width, height, BufferedImage.TYPE_INT_RGB);
        ImageIcon imageIcon = new ImageIcon(image);
        ImageObserver observer = imageIcon.getImageObserver();
        buffImage.getGraphics().setColor(new Color(255, 255, 255));
        buffImage.getGraphics().fillRect(0, 0, width, height);
        buffImage.getGraphics().drawImage(imageIcon.getImage(), 0, 0, observer);
        ByteArrayOutputStream stream = new ByteArrayOutputStream();
        JPEGImageEncoder jpeg = JPEGCodec.createJPEGEncoder(stream);
        jpeg.encode(buffImage);
        URL url = new URL(/* my url... */);
        URLConnection connection = url.openConnection();
        String boundary = "--------" + Long.toHexString(System.currentTimeMillis());
        connection.setRequestProperty("method", "POST");
        connection.setRequestProperty("Content-Type", "multipart/form-data; boundary=" + boundary);
        String output = "--" + boundary + "\r\n"
                      + "Content-Disposition: form-data; name=\"myImage\"; filename=\"myFilename.jpg\"\r\n"
                      + "Content-Type: image/jpeg\r\n"
                      + "Content-Transfer-Encoding: base64\r\n\r\n"
                      + new String(stream.toByteArray())
                      + "\r\n--" + boundary + "--\r\n";
        connection.setDoOutput(true);
        connection.getOutputStream().write(output.getBytes());
        connection.connect();
    } catch {
}This code works, but the image I get when I save it from the receiver application is distorted. The width and height is correct, but the content and colors are really weird. I tried to set different image types (first line inside the try-block), and this gave me different distorsions, but no image type gave me the correct image.
Maybe I should say that I can display the original Image object on screen correctly.
I also realized that the Image object is an instance of BufferedImage, so I thought I could skip the first six lines inside the try-block, but that doesn't help. This way I don't have to set the image type in the constructor, but the result still is color distorted.
Any ideas on how to get from an Image/BufferedImage to a string or byte array representation of the image in jpeg format?

Here you go:
private static void send(BufferedImage image) throws Exception
    ByteArrayOutputStream byteArrayOutputStream = new ByteArrayOutputStream();
    ImageIO.write(image, "jpeg", byteArrayOutputStream);
    byte[] imageByteArray = byteArrayOutputStream.toByteArray();
    URL url = new URL("http://<host>:<port>");
    HttpURLConnection connection = (HttpURLConnection) url.openConnection();
    connection.setDoOutput(true);
    connection.setRequestMethod("POST");
    OutputStream outputStream = connection.getOutputStream();
    outputStream.write(imageByteArray, 0, imageByteArray.length);
    outputStream.close();
    connection.connect();
    // alternative to connect is to get & close the input stream
    // connection.getInputStream().close();
}

Returning unicode string through function argument.

Hi all,
I have following function written in a C++ dll. I need to be able to call it from Java using JNI. This function expects to receive a buffer pointed by wchar_t * of "int len" length. It will copy write some text in to this buffer and i need to be able to get this updated Unicode string in Java code. please let me know how to write Java code to call this function.
int getWString(wchar *ch, int len)
wcsncpy( ch, L"Hello unicode world", len);
return 1; // no error
}Best Regards
Noman Khan

You can't.
You have to write some C "wrapper" code that meets the java interface, and have it call the C function and handle the return.
Java doesn't do output parameters, especially wchar_t* s.

How to get the string's byte length?

I have some string,I want to get the string's byte length,how
can do it?
for example:
<cfoutput>#len('hihi，这是测试')#</cfoutput>
output is 9
I want to get the byte length is 14, how can i get it?
Thanks.

>> Fair cop. I didn't realise that asc() returned the
codepoint rather than the
> actual character code.
>
> and what would be the difference?
Oh, sorry, whatever the term is (I'm crap with jargon). The
value returned
by asc() for those chars was only two bytes (ie: four hex
digits). I
didn't realise there was more to it than that, and that
2-byte value maps
to some other THREE byte value. I need to do some reading...
> that's what both cf & java counted as the length.
CHARACTER length, sure. No-one's disputing that. On the other
hand,
no-one's asking about it, either.
> by adding a BOM you've already effected the encoding,
which may or may not
> match the original. so you still don't know how many
bytes were in the original
> string.
[groan]
Yes, that's a reasonable strawman there. I was only putting
it in a file
so I could save it and check the number of bytes occupied by
the data.
Clearly... CLEARLY... the OP is not asking for a character
length of that
string. They've said as much.
I copy and pasted the string from their post, and used it as
a
demonstration of how "nine" is not the right answer for the
BYTE LENGTH of
that string. Whether or not the original string was UTF-8,
UTF-16 or
special-marmoset-encoding, it almost certainly was NOT in a
fictitious kind
encoding in which each of those particular characters only
occupied one
byte each, which would mean that "nine" is the correct answer
to the
question.
When I copied those characters from either the web browser
for from my
text-based news agent, notepad identified them (and rendered
them
correctly) as UTF-8, so I'm fairly confident they ARE UTF-8.
Of course
this could be down to some intermediary encoding (pasting
them in to the
original posting, for example, via some encoding-transforming
mechanism),
but Occam's Razor suggests the original question was from a
UTF-8 POV.
But maybe we should quit speculating and ask the OP. Unless
they've
buggered off in despair of how drawn out all this is getting.
For which I
would not blame them.
Adam

How to get my mail through without opening the mail app...

Hi
I have a tendancy to when ive finished using with my apps on my Mac I always go to top left and press quit itunes or quit mail etc
if i do that to mail, obviously when a email comes through i dont get it straight through unless the mail program is open (like on my iphone, if an email comes it just comes straight through)
what im asking is, is there a way for me to get my mail through straight away whilst the mail program is open? - thing is I like things tidy and dont like all these programs left open
also what is the point of the red X in the top left corner?, if im on a website on safari and I press the X, safari is still open isnt it, but if i click back onto safari to re open the app it just goes to the homepage
so really what is pressing the red X on the top left and quitting the app altogether, what is the difference?

Mail has to be open to receive the new mail notification.
Clicking the red x button just closes the window, does not quit the application.
To quit the application, you have to select "Quit......" from the application menu.
When an application is open, a white light indicator will be shown under the application icon in the Dock.

How to display unicode string in alv

Hi,guys, I came accross one problem on displaying unicode string in alv rows.
some string like this: \u591c\u9e23\u732a , They are displayed directly in alv. Actually, they are some chinese characters.
Any one could help me? Should I invoke any function module to convert it ?
Thanks.

Hi,
Kindly refer the link below:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1046905c-3acf-2b10-aea6-a70ade12c76f
Hope this helps you.
Regards,
Tarun
Edited by: Tarun Gambhir on Mar 22, 2009 9:49 AM

How to get list name through javascript?

Hi,
I wrote javascript for getting list items but here I'm hard coded list name as "Projects"(my list name). How can I get list name automatically with out hard coding,
Appreciate if anyone help.
Thank you.
function DoLogicalDelete()
var clientContext = null;
var oList = null;
var oListItem = null;
// var lstItmIsDeleted = null;
var itmID = getQuerystring('ID');
clientContext = SP.ClientContext.get_current();
oList = clientContext.get_web().get_lists().getByTitle('Projects');
// var oListItemID = SP.ListOperation.Selection.getSelectedItems(clientContext);
oListItem = oList.getItemById(itmID); // getting ID
clientContext.load(oListItem,"Title", "IsDeleted"); // load items to oListItem
oListItem.set_item('IsDeleted', true);
oListItem.update();
clientContext.executeQueryAsync(Function.createDelegate(this, this.onQuerySucceeded),Function.createDelegate(this, this.onQueryFailed));

Not sure on which context you are executing the code. If you executing this from the list form and trying to get the current list, then you may need to get the list name from the breadcrumb/list title field. Refer to the following posts for more information
http://sharepoint.stackexchange.com/questions/39008/how-to-get-list-name-from-js-object-model-list-name-from-url-problem
http://itrob.be/sharepoint-get-all-lists-names-in-javascript-spservice-and-jquery/
--Cheers

How to get work done through Sub Contracting

Hi.. guys..
my current client is in textile(Embroidery).
They get order from clent and do work. after finsihing work, if they find
some defect in fisished goods they send it for job to external party and get it done.
in short they get thier work through sub contracting.
Please let me know to main this situation i.e. inventory and production maangement
Thanks
hemant

Hi,
There is not any facility like this in B 1, but there is one work arround. I applied this at one of my client site and it is working.
Maintain A diffrent warehouse for subcontractor and transfer the defect item in subcontractor whse , when u got it back from that , do one more inventory transfer from sub contractor whse to your whse
hope this will help u
thanks
Deepak Tyagi

How to get Chinese string in the database?

Hi,
My dear friends.
I successfully connect the database, the data in the table as shown below
When I try to get "小明", but the following results were obtained
Does anyone know why, and how to get the correct result?
Thank you.

You need to be aware of character conversions. Look at WideString, it support UTF32 chars.

How to get a string of an HTML element

Imagine a normal web page with its tags. I have to get the
value of a precise element and convert it to a String in order to
show it in a TextField. Specifically, I have to take a precise cell
of a table and insert it in a string.
Does AIR help me with some method that catches specific
elements of a HTML code or have I to parse the string of the entire
HTML and try to reach the wanted value?
In this last case, how do I convert the entire HTML of a page
into a string?
Any other ideas are welcome.
Thanks.

quote:
Originally posted by:
Marco Sgna
Does AIR help me...
No, but I don't see that it has to. I presume
you're writing an AIR app with HTML and JavaScript. If so, you can
query and modify the HTML's DOM tree with JavaScript. Then, still
using JavaScript, you pass it off to the AIR side, using the "AIR
aliases" APIs. So:
<table><tr><td
id="foo">bar</td></tr></table>
<script>var mycontent =
document.getElementById('foo').innerHTML; // variable equals "bar"
now</script>
quote:
how do I convert the entire HTML of a page into a string?
document.toString(), perhaps.

How to get the string value from the RichSelectBooleanCheckBox component?

I added a validator to a RichSelectBooleanCheckBox component which is binded to a String attribute of a View Object.
I defined the mapping of boolean value to corresponding String value in the corresponding attribute binding in the page definition.
When the validate() method of my validator was invoked, the new value passed to the validate method() was a Boolean value instead of the converted String value.
I need to write validate() method generically so that it can handle more than one way of mapping boolean values to String values.
How can I get the converted String value in my validator method() from the RichBooleanCheckBox component that was also passed to the validate() method as a parameter?

use:
int num = Integer.parseInt(s);

How to get prepared string before sending to sql

Hi
I want the prepared string before sending to Sql (After substitution and setXXX), is it possible to do this? if yes, how ?
PreparedStatement ps = cn.prepareStatement("select * from table1 where name= ''?'' ");
ps.setString(1, "mytable")
<-- I want the prepared string before sending to Sql (After substitution and setXXX) -->
ResultSet rs = ps.executeQuery();
Thanks
Ali

As I mentioned, I want Sql Text before execution
n (getting resultSet), and after whole of setXXXs,No way, I believe.
I have tried in many ways, let me put down my work.
String query = "'Select * from dept where deptno=?'";
System.out.println("Before : "+query);
PreparedStatement ps = con.prepareStatement("select "+query+",? from Dual");
ps.setInt(1,50);
ResultSet rs = ps.executeQuery();
if(rs.next()) {
System.out.println("After : "+rs.getString(1));
ps.close();
con.close();I have tried in these lines, to capture the sql query, but it is failing at execution and the exception is 'bind variable not found'. So, I think you need to implement your own class to construct this query. Getting the details from DatabaseMetadata to see how the driver's setter methods works and you can use the same logic in your custom class.
Good luck.

How to get unicode string through NCO 3.x ?

Similar Messages

Maybe you are looking for