How to get value when OAMessageLovInputBean Change
How to get value when OAMessageLovInputBean Change
I want to get lov value atfer user select value return page
As you wanna get the value in process form request, get the value from the VO column attached to the bean, if not you can attach a tranient Vo attribute!
--Mukul
Similar Messages
-
How to get notified when changes happen on Hyper-V host or VMs
Is there a way to get notified on Hyper-V host or VM changes? Our intention is to notify the system-administrators on any changes.
1. How to get notified when new VM is created (or deleted) on Hyper-V.
2. How to get notified when any memory/CPU/disk is added (or deleted) on any VM(s).
In general:
- Get notified when any changes happens to Hyper-V host.
- Get notified when any changes happens on any VMs.
Our target servers are Windows Server(2008, 2008 R2, 2012, and 2012 R2)
We tried to get the notification using "Event Viewer" on different Windows servers (2008, 2008 R2, 2012, and 2012 R2)
We were able to get event-logs only on one of our 2012 R2 server as described below on creation/deletion of VMs (on another 2012 R2 server, we did not got any such event, Is there any setting required on host computer to get Hyper-V event-logs in "Event
Viewer"?)
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 12/18/2014 1:21:45 AM
Event ID: 13002
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: HPHyper-V.COMPUTERNAME.lab
Description:
A new virtual machine 'TestVM' was created. (Virtual machine ID A0FED305-7B1A-4BB5-952C-BA9634ACDA45)
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 12/17/2014 10:57:01 PM
Event ID: 13003
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: HPHyper-V.COMPUTERNAME.lab
Description: The virtual machine 'TestVM' was deleted. (Virtual machine ID A0FED305-7B1A-4BB5-952C-BA9634ACDA45)Thanks for your reply,
Just to make it more clear:
In our environment we have enabled Hyper-V on following Windows servers: 2012 R2, 2012, 2008 R2, 2008. The environment is very dynamic, VMs are getting created and deleted very frequently. Our intention is to get notified by any means on VM creation/deletion,
currently we are relying on event-logs (we are OK with any different mechanism for such notification if there exists, i,e other than event-logs)
We were able to get event-logs only on few of our 2012 R2 server on creation/deletion of VMs. On another 2012 R2 server, we did not got any such event (do we need to make some settings on 2012 R2 to get events? If yes, what are those settings).
Also we are not getting any such event of VM creation/deletion on our Windows Server 2012, 2008, 2008 R2. Is there any setting required on hese host computer to get Hyper-V event-logs in "Event Viewer" for VM creation/deletion? -
How to get Value of a item of first record when current record is second
How to get Value of a item of first record when current record is second in Form6i ?
get_item_instance_property dose not allow to get value.Gerd,
You're right, there are several other triggers that must be coded, but I was responding to Steve's statement about Inserting or deleting records from the multi-record block. For the record, I use the following to manage a Record Group:
* When-New-Block-Instance - Initialize the RG
* block Post-Query - populate the RG
* When-Create-Record - add new record to RG
* When-Remove-Record - remove record from RG
* block When-New-Item-Instance - capture previous value of the item or row
* When-Validate-Item - Item specific Insert, Update, Delete of values in the RG
There are a few other places as well, but these are the minimum. It might seem like a lot of code, but then again, I don't use this solution for every multi-line block. Like all tools, you use the right tool for the job. :-)
Craig... -
How to get values/data stored in the database into a list-item.
how to get values/data stored in the database into a list-item.
i tried to make a list item without any values assigned to it...but i got the below error.
FRM-30191: No list items defined for required poplist.
or
FRM-32082: Invalid value for given item type.
List EMPNO
Item: EMPNO
Block: EMP
Form: MODULE5
FRM-30085: Unable to adjust form for output.
then according to some docs, i tried the the following for the trigger
when-new-form-instance
declare
rg_name varchar2(40) := 'emp_rec';
status number;
groupid recordgroup;
it_id item;
begin
it_id := Find_Item('empno');
groupid := create_group_from_query(rg_name, 'select empno from emp');
status := populate_group(groupid);
populate_list(it_id, groupid);
end;
but yet didnt work... :(
so how the heck do i get values fetched from the database table into the list item?for list items you need to values in the record group, one is the shown value and one is the returned value.
Check out the online help for the populate_list built-in.
You'll need something like select ename,ename from emp as the record group query. -
Hi SDN's,
Can u tell me how to get headers when we download data to excel with using (we are using DBF as file type in the following method )
CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
(We can't use GUI_DOWNLOAD)
Thanks in advance..
BRHi,
I m giving u a bdc code i hope ur prob ll be solved.
*& Report ZDTK_BDC_LT01
*& PROGRAME TITLE : LT01
*& AUTHOR : D TARUN KUMAR
*& MM CONSULTANT : Mr. MRINMOYE CHAKRABORTY
*& REQUEST NO. : RD1K901995
*& TRANSACTION ID : ZLT01
*& PACKAGE : ZTARUN
*& DESCRIPTION : BDC REPORT TO UPLOAD INITIAL STOCK POSTING AND
*& STORAGE BINS THROUGH LT01.
REPORT ZDTK_BDC_LT01
no standard page heading line-size 255.
TYPE-POOLS: TRUXS.
STRUCTURE DECLARATION
TYPES : BEGIN OF TY_UPLOAD,
LGNUM(3),
BETYP(1),
BENUM(10),
BWLVS(3),
MATNR(18),
BISMT(18),
ANFME(16),
WERKS(4),
LGORT(4),
CHARG(10),
LETYP(10),
VLTYP(3),
VLBER(3),
VLPLA(10),
VLQNR(10),
NLTYP(3),
NLBER(3),
NLPLA(10),
NLQNR(10),
END OF TY_UPLOAD.
INTERNALTABLE & WORKAREA DECLARATION
DATA : T_UPLOAD TYPE STANDARD TABLE OF TY_UPLOAD,
T_BDCDATA TYPE STANDARD TABLE OF BDCDATA,
T_BDCMSGCOLL TYPE STANDARD TABLE OF BDCMSGCOLL,
W_UPLOAD TYPE TY_UPLOAD,
W_BDCDATA TYPE BDCDATA,
W_BDCMSGCOLL TYPE BDCMSGCOLL,
GLOBLE DECLARATION
G_FLNAME TYPE STRING,
G_MESSAGE(70) TYPE C,
IT_RAW TYPE TRUXS_T_TEXT_DATA,
GLOBLE DECLARATION
WA_OPT TYPE CTU_PARAMS.
WA_OPT-UPDMODE = 'A'.
WA_OPT-DEFSIZE = 'X'.
WA_OPT-DISMODE = 'A'.
SLECTION SCREEN DECLARATION
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 2.
PARAMETER : P_FILE LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN : END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
PERFORM GET_FILENAME.
START-OF-SELECTION.
PERFORM UPLOAD_DATA.
*PERFORM GET_FINAL.
*PERFORM GET_MIGO.
PERFORM SESSION.
*PERFORM TEST.
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR W_BDCDATA.
W_BDCDATA-PROGRAM = PROGRAM.
W_BDCDATA-DYNPRO = DYNPRO.
W_BDCDATA-DYNBEGIN = 'X'.
APPEND W_BDCDATA TO T_BDCDATA.
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
CLEAR W_BDCDATA.
W_BDCDATA-FNAM = FNAM.
W_BDCDATA-FVAL = FVAL.
APPEND W_BDCDATA TO T_BDCDATA.
ENDIF.
ENDFORM.
*& Form GET_FILENAME
TEXT
FORM GET_FILENAME .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = P_FILE
ENDFORM. " GET_FILENAME
*& Form UPLOAD_DATA
text
form UPLOAD_DATA .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
I_LINE_HEADER = 'X'
I_TAB_RAW_DATA = IT_RAW
I_FILENAME = P_FILE "WORK TABLE
TABLES
I_TAB_CONVERTED_DATA = T_UPLOAD[] "ACTUAL DATA
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " UPLOAD_DATA
*& Form SESSION
text
FORM SESSION .
*sort t_upload by bismt.
LOOP AT T_UPLOAD INTO W_UPLOAD.
REFRESH T_BDCDATA.
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = W_UPLOAD-CHARG
IMPORTING
OUTPUT = W_UPLOAD-CHARG .
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = W_UPLOAD-VLBER
IMPORTING
OUTPUT = W_UPLOAD-VLBER .
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = W_UPLOAD-NLTYP
IMPORTING
OUTPUT = W_UPLOAD-NLTYP .
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = W_UPLOAD-NLBER
IMPORTING
OUTPUT = W_UPLOAD-NLBER .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = W_UPLOAD-CHARG
IMPORTING
OUTPUT = W_UPLOAD-CHARG .
DATA : BWLVS(3),
LGORT(4),
WERKS(4),
CHARG(10),
LETYP(10),
VLTYP(3),
VLBER(3),
VLPLA(10),
VLQNR(10),
NLTYP(3),
NLBER(3),
NLQNR(10).
DATA : W_MATNR(18).
*SELECT SINGLE MATNR FROM MARA INTO W_MATNR
WHERE BISMT = W_UPLOAD-BISMT.
BWLVS = '999'.
LGORT = '3500'.
WERKS = '1030'.
LETYP = 'E1'.
VLTYP = '998'.
VLBER = '001'.
VLPLA = 'AUFNAHME'.
NLTYP = '354'. "(packaging material)
*NLTYP = '353'. "(spareparts material)
NLBER = '001'.
*include bdcrecx1.
*start-of-selection.
*perform open_group.
perform bdc_dynpro using 'SAPML03T' '0101'.
perform bdc_field using 'BDC_CURSOR'
'LTAP-CHARG'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LTAK-LGNUM'
W_UPLOAD-LGNUM. "'350'.
perform bdc_field using 'LTAK-BENUM'
W_UPLOAD-BENUM. "'1000000000'.
perform bdc_field using 'LTAK-BETYP'
W_UPLOAD-BETYP. "'P'.
perform bdc_field using 'LTAK-BWLVS' BWLVS. "'999'.
perform bdc_field using 'LTAP-MATNR'
W_upload-MATNR. "'40000009'.
perform bdc_field using 'RL03T-ANFME'
W_UPLOAD-ANFME. "'1,000'.
perform bdc_field using 'LTAP-WERKS' WERKS. "'1030'.
perform bdc_field using 'LTAP-CHARG'
w_upload-charg.
perform bdc_dynpro using 'SAPML03T' '0102'.
perform bdc_field using 'BDC_CURSOR'
'LTAP-NLPLA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RL03T-ANFME'
W_UPLOAD-ANFME. "'1,000'.
*perform bdc_field using 'LTAP-ALTME'
'KG'.
perform bdc_field using 'LTAP-LETYP' LETYP. "'E1'.
*perform bdc_field using 'LTAP-CHARG' W_UPLOAD-CHARG. "'0000000101'.
perform bdc_field using 'LTAP-VLTYP' VLTYP. "'998'.
perform bdc_field using 'LTAP-VLBER' VLBER. "'001'.
perform bdc_field using 'LTAP-VLPLA' VLPLA. "'AUFNAHME'.
perform bdc_field using 'LTAP-NLTYP'
W_UPLOAD-NLTYP. "'351'.
perform bdc_field using 'LTAP-NLBER' NLBER. "'001'.
perform bdc_field using 'LTAP-NLPLA'
W_UPLOAD-NLPLA. "'01 00 01'.
*perform bdc_transaction using 'LT01'.
*perform close_group.
CALL TRANSACTION 'LT01' USING T_BDCDATA
MODE 'A'
UPDATE 'A'
OPTIONS FROM WA_OPT
MESSAGES INTO T_BDCMSGCOLL.
IF SY-SUBRC <> 0.
READ TABLE T_BDCMSGCOLL INTO W_BDCMSGCOLL INDEX 1.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = SY-MSGID
LANG = 'EN'
NO = SY-MSGNO
V1 = SY-MSGV1
V2 = SY-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = G_MESSAGE
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
WRITE : / W_upload-matnr ,'-----' , G_MESSAGE.
REFRESH T_BDCMSGCOLL.
ENDIF.
ENDIF.
*clear : w_matnr, w_upload.
ENDLOOP.
ENDFORM. " SESSION -
How to get Value of tree node without Reload Page
hi,
i worked with apex 4.2 and i created Tree and tabular form to retrieve the date according the value of tree select node the code of tree something like this
select case when connect_by_isleaf = 1 then 0
when level = 1 then 1
else -1
end as status,
level,
"ENAME" as title,
null as icon,
"EMPNO" as value,
null as tooltip,
'f?p=36648:34:5234984107903::::P40_SELECTED_NODE:'||empno as link
from "DEPT"."EMP"
start with "MGR" is null
connect by prior "EMPNO" = "MGR"
order siblings by "ENAME
and i put Selected Node Page Item: P40_SELECTED_NODE . the tree worked good and retrieve the data into tabular form according to tree node value
my Question :
1- i want to retrieve the data without submit the page where each time i select value from tree make page reload to update the tabular form with new value ,there is any way to pass the value of tree node to P40_SELECTED_NODE item and refresh tabular form without page reload .
2- i want when selected from tree run page process according to value of tree node i tray to create Dynamic action with *(jquery selector : div.tree li>a)* but the Value of node incorrect.
Regards
Ahmed;look at this link
Re: How to get Value of tree node without Reload Page ..! -
LTA is getting Double when EE changes Department /Designation in mid of the
Hi Sapiants,
LTA amount is getting Double when EE changes Department /Designation in mid of the month. what is the reason behind this problem.
Regards
vinmaxDear Delik,
Now double appearance of LTA amount is gone by assigning the spec . to Pr.Cl. - 06 .Your answer helped buddy in this egard. but a new problem is coming. system is populaating some amount with a wagetype. though it is not part of IT 0008.
Thanx
Vinmax
Edited by: kvin kvin on Jul 25, 2008 12:28 PM
Edited by: kvin kvin on Jul 25, 2008 12:29 PM -
How to get sound when my laptop is hooked to my tv w/hdmi cable?
how to get sound when my laptop is hooked to my tv w/hdmi cable? it's a hd tv and my mac's os 10.6.8
tried using an external speaker both w/the computer and then the tv, but neither worked......
Message was edited by: bevmexHi,
Open windows Control Panel, open Device Manager and open up Display Devices - make a note of the hardware listed here i.e. ATI, NVidia or Intel.
Next, connect your notebook via HDMI to your Tv. Right click the speaker icon in the Taskbar and select Playback Devices. Left click once ( just to highlight the entry ) the HDMI Output that has the same name as your display adapter and then click the Set Default button - see if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
How to get value from list item
Hi all,
How to get value from list item?
I have a problem with the List Item object
in the Oracle forms.
How can I retrieve the selected item from
a list ?
I didn't find any function like 'list.GET_
SELECTED_ITEM()'...
thanks
BalaHello,
You get the value as for any other Forms item:
:value := :block.list_tem ;Francois -
How to get value in showModalDialog()
Hi,
I would like to know how to get value pass into showModalDialog() to be used by the server (using request.getParameter())
TQplease try out this kind of code
<script language="javascript">
function trial(){
var retVal = new Object();
retVal = ShowModalDialog("ur JSp");
</script>
<script>
<form >
<input type="hidden" name ="mylink "value= javascript:trial();>
</form>
<%
String str=request.getParameter("mylink");
%>
and plz let me know .. if it works -
How to get value in a web page automatically and sava output in database
how to get value this table output is
row 1, cell 1
row 1, cell 2
row 2, cell 1
row 2, cell 2
<table border="1">
<tr>
<td>row 1, cell 1</td>
<td>row 1, cell 2</td>
</tr>
<tr>
<td>row 2, cell 1</td>
<td>row 2, cell 2</td>
</tr>
</table>Note: This thread was originally posted in the [Java Technologies for Web Services|http://forums.sun.com/forum.jspa?forumID=331] forum, but moved to this forum for closer topic alignment.
-
How to get value in function insert table test ?
Hi
I use function insert table test in order to get value in table for use in code page but i don't know how to get value in table.If somebody have any idea.Please give me some advice.
Thank you,
WarujaYou will need to grab the contents with VBA
Table test is user interface only.
This thread may help
http://qazone.empirix.com/thread.jspa?threadID=748&tstart=0 -
How to get the Reports of Change Tracking Table in MDM?
Hi!
Please tell me how to get the reports of Change Tracking Table in MDM which is a System table, directly from MDM without using any interface.
Thanks in advance for the reply.
With Best Regards
Devendra PandeyHi Devendra,
MDM can track changes on tables and fields. <u>The level of change tracking, and which tables/fields to track, are configurable in the MDM Console</u>. MDM opens a new database on the same database engine as the MDM repository and writes all change records to this database.
For information of various steps you can visit
<a href="http://help.sap.com/saphelp_mdm550/helpdata/en/45/c7b20339ee570ae10000000a114a6b/content.htm">this URL</a>
Regards,
Krutarth -
How to get the only the changed or newly added entries in AFTER SAVE.
I have created table maintenance generated for a table,I want to get the newly added or changed entries while saving thats why im using AFTER SAVE event for the same,can anyone please tell me how to get the only the changed or newly added entries in AFTER SAVE.
Hi,
Welcome you post on the forum.
I have moved your thread here because it is in English and should not in the language specific forum. What is your system version?
Thanks,
Gordon -
How to get value of URL parameter
Hi,
If an ABAP Web Dynpro URL looks like this: http://<server>:<port>/sap/bc/webdynpro/sap/zny_test1?sap-client=100&sap-language=EN, how to get value of the URL parameter sap-client at runtime in the application?
Thanks,
NancyThe framework currently strips all the framework specific params.
Perhaps the will be made available in a future release. Thomas, any comments ?
However, I dont understand the requriement to know the sap-client URL value.
If your code is running, a user has successfully connected to system a therefore he has a session open and this session is associated with exactly 1 client at any point in time.
See SYSTEM VARAIBLE SY-MANDT.
this represents the client in which the users session is running and negates the need to see
sap-client URL value.
regards
Phil.
Maybe you are looking for
-
Custom fields values not saved in AUFK using bapi_alm_order_maintain
Hi , We have a requirement where we have to update the custom fields in enhancement tab of IW31 using bapi_alm_order_maintain. We are able to get the successful creation of work order ,but the custom fields are not updated in enhancement tab aswe
-
HT1343 secret preferences not from third party app.
My one year old daughter hit a bunch of keys on my mac and it opened a preference window that had almost every preference on the whole computer listed. It was a list not icons. It looked like a lot more preferences than you find in the standard prefe
-
Attaching a document to an email
How can I attach a document or a photo to an email I am sending? Message was edited by: jfioramo
-
I will tell my problem first and then some background. When I attempt to print mono prints on my Epson R1800 using the "black" output opion on the print dialog I cannot get a true mono image and the full tonal range replicated. Often I have too much
-
Getting channel name change in the save-Block accepted
Hi there, i tried to change my channel names in the save-block. If i run the dac and the script again the old channel-names are still used. I reloaded the dac and restarted diadem and the new channel-names are correct listed in the save block, but wh