How to get variants for ALV List or Grid?
Hi,
I have one standard program RGJVSO10, for 4.6c, to diplay variants they r using fm GJ_LIST_VARIANT_VALUE_HELP, where they r passing table name and get the variants.
But in ECC6.0 for the same program they r using FM REUSE_ALV_VARIANT_F4, but the variants are not displaying, form the table what they r passing in 4.6c,
Is ther any option to get those variants using this function module?
Hi,
I have check u r db table but not finding variant . i will check with prg and inform u .mean while u check with these variants.
whether it suits u.
REUSE_ALV_VARIANT_ALL_MAINTAIN
REUSE_ALV_VARIANT_SELECT.
REUSE_ALV_VARIANT__MAINTAIN
REUSE_ALV_VARIANT_DEFAULT_GET
Reward if its usefull.
Regards
Durgaprasad
Similar Messages
-
How to get the variants for LAV LIST or GRID?
Hi,
How to get the variants which are stored in table like JVSO1, using function module REUSE_ALV_VARIANT_F4 ?
Thanks.Hi,
Delcare
DATA : st_variant TYPE disvariant, "Work area for variant
st_variant1 TYPE disvariant. "Work area for variant
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-041.
PARAMETERS : p_varnt TYPE disvariant-variant MODIF ID md8. "Variant
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_varnt.
*--Local Variables
DATA: l_exit(1) TYPE c. "ALV exit
*--Call the function module to display the list of Variants
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = st_variant
i_save = c_save
IMPORTING
e_exit = l_exit
es_variant = st_variant1
EXCEPTIONS
not_found = 1
program_error = 2.
*--Check Subrc
IF sy-subrc <> 2 AND l_exit IS INITIAL.
p_varnt = st_variant1-variant.
ENDIF.
start-of-selection.
IF NOT p_varnt IS INITIAL.
CLEAR st_variant1.
MOVE st_variant TO st_variant1.
MOVE p_varnt TO st_variant1-variant.
*--Call the function module to check the variant exist
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = c_save
CHANGING
cs_variant = st_variant1.
st_variant = st_variant1.
ENDIF.
DATA : lv_repid TYPE sy-repid.
*--Pass the Report name
lv_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = lv_repid
it_fieldcat = it_fcat
is_variant = st_variant
it_events = it_events
i_save = 'A'
i_callback_user_command = 'USER_COMMAND'
TABLES
t_outtab = it_zsd_ra
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e368(00) WITH 'Alv Display failed'(044) .
ENDIF.
regards,
Prashant -
How to set variant for ALV grid from ABAP
Hello,
I have a program which displays some data with ALV grid. Then after some operation I would like to set different layout for the grid, but not by choosing it manually but by the program. I thought that it would be enough to use the method SET_VARIANT, so I'm setting DISVARIANT structure properly, using SET_VARIANT method and after that I'm calling REFRESH_TABLE_DISPLAY but layout is not changed. What else should I do? Is that possible?
Best regards,
MarcinHi,
Check this
* While declaring select-options
parameters: p_vari like ltdx-variant. " Layout
* then add the following code in
at selection-screen on value-request for p_vari.
perform f_variant_f4 using p_vari.
* Code for f_variant_f4
form f_variant_f4 using p_vari.
* private variables
data : v_exit type c.
clear gs_variantt.
v_variant_save = 'U'.
call function 'LVC_VARIANT_F4'
exporting
is_variant = gs_variant
i_save = v_variant_save
importing
e_exit = v_exit
es_variant = gs_variantt
exceptions
not_found = 1
program_error = 2
others = 3.
if sy-subrc ne c_0.
message i999(yscc) with text-064. " No Layout Available for F4
endif.
if v_exit is initial.
gs_variant-variant = gs_variantt-variant.
p_vari = gs_variantt-variant.
endif.
endform. " F_variant_f4
* In PBO
call method grid1->set_table_for_first_display
exporting
is_layout = gs_layout
is_variant = gs_variant
i_save = 'A'
it_toolbar_excluding = i_exclude[]
changing
it_outtab = i_output[]
it_fieldcatalog = i_fieldcat[]
exceptions
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
others = 4.
a® -
How to get alternative strings in list of strings.
Hi experts,
how to get alternative strings in list of strings.
eg
'country1, italy, country2, india, country3, paris, country4, scottland, country5, rome'
from the above list i need to fetch all the countries and their names separately.
like country1, country2, country3, country4, country5
italy, india, paris, scottland, rome
i am trying the above one in the below fashion
SELECT SUBSTR
('country1, italy, country2, india, country3, paris, country4, scottland, country5, rome',
1,
INSTR
('country1, italy, country2, india, country3, paris, country4, scottland, country5, rome',
1,
1
- 1
FROM DUAL
can you please any one help meIf you want the data to be more stuctured, and useful:
col col_name for a20
col col_value for a20
var inlist VARCHAR2(2000)
exec :inlist := 'country1, italy, country2, india, country3, paris, country4, scottland, country5, rome';
exec :inlist := replace(:inlist,' ')
select max(decode(mod(lvl,2),1,value)) col_name
,max(decode(mod(lvl,2),0,value)) col_value
from (select substr(:InList,start_pos+1, end_pos-start_pos-1) value
,lvl
from (select :InList
,case when level = 1 then
0
else
instr(:InList,',',1,level-1)
end start_pos
,case when instr(:InList,',',1,level) = 0
then length(:InList)+1
else
instr(:InList,',',1,level)
end end_pos
,level lvl
from dual
connect by level <=length(:InList)-length(replace(:InList,','))+1
group by ceil(lvl/2)
order by 1;
COL_NAME COL_VALUE
country1 italy
country2 india
country3 paris
country4 scottland
country5 rome
Untested on 10g
Then you could stragg the rows together ... -
I just downloaded 3 podcast items into my iPod shuffle but don't know how to listen to it. It plays the music list but don't know how to get to my podcast list to play it..
jfromnj wrote:
I purchased and downloaded the Family Pack of IWork. I recently purchased another computer (MacBook Pro) and I want to be able to use IWork on the new
computer but don't know how to go about it. The only thing on the Apple home page is to purchase either the item or trial pack. I don't think I should have to purchase anything since a family pack covers 5 computers in the same household. Please, if someone knows how to go about this and what I need to do so please let me know. Thank you.
You didn't keep the download for future use? -
How to get Text for nodes in Tree Structure
Hi Friends,
How to get Text for nodes in Tree Structure
REPORT YFIIN_REP_TREE_STRUCTURE no standard page heading.
I N I T I A L I Z A T I O N
INITIALIZATION.
AUTHORITY-CHECK OBJECT 'ZPRCHK_NEW' :
ID 'YFIINICD' FIELD SY-TCODE.
IF SY-SUBRC NE 0.
MESSAGE I000(yFI02) with SY-TCODE .
LEAVE PROGRAM.
ENDIF.
class screen_init definition create private.
Public section
public section.
class-methods init_screen.
methods constructor.
Private section
private section.
data: container1 type ref to cl_gui_custom_container,
container2 type ref to cl_gui_custom_container,
tree type ref to cl_gui_simple_tree.
methods: fill_tree.
endclass.
Class for Handling Events
class screen_handler definition.
Public section
public section.
methods: constructor importing container
type ref to cl_gui_custom_container,
handle_node_double_click
for event node_double_click
of cl_gui_simple_tree
importing node_key .
Private section
private section.
endclass.
*& Classes implementation
class screen_init implementation.
*& Method INIT_SCREEN
method init_screen.
data screen type ref to screen_init.
create object screen.
endmethod.
*& Method CONSTRUCTOR
method constructor.
data: events type cntl_simple_events,
event like line of events,
event_handler type ref to screen_handler.
create object: container1 exporting container_name = 'CUSTOM_1',
tree exporting parent = container1
node_selection_mode =
cl_gui_simple_tree=>node_sel_mode_multiple.
create object: container2 exporting container_name = 'CUSTOM_2',
event_handler exporting container = container2.
event-eventid = cl_gui_simple_tree=>eventid_node_double_click.
event-appl_event = ' '. "system event, does not trigger PAI
append event to events.
call method tree->set_registered_events
exporting events = events.
set handler event_handler->handle_node_double_click for tree.
call method: me->fill_tree.
endmethod.
*& Method FILL_TREE
method fill_tree.
data: node_table type table of abdemonode,
node type abdemonode.
types: begin of tree_node,
folder(50) type c,
tcode(60) type c,
tcode1(60) type c,
tcode2(60) type c,
text(60) type c,
text1(60) type c,
text2(60) type c,
end of tree_node.
data: wa_tree_node type tree_node,
t_tree_node type table of tree_node.
wa_tree_node-folder = text-001.
wa_tree_node-tcode = text-002.
wa_tree_node-text = 'Creditors ageing'.
wa_tree_node-tcode1 = text-003.
wa_tree_node-text1 = 'GR/IR aging'.
wa_tree_node-tcode2 = text-004.
wa_tree_node-text2 = 'Bank Balance'.
append wa_tree_node to t_tree_node.
clear wa_tree_node .
wa_tree_node-folder = text-005.
wa_tree_node-tcode = text-006.
wa_tree_node-text = 'Creditors ageing'.
wa_tree_node-tcode1 = text-007.
wa_tree_node-text1 = 'Creditors ageing'.
wa_tree_node-tcode2 = text-008.
wa_tree_node-text2 = 'Creditors ageing'.
append wa_tree_node to t_tree_node.
clear wa_tree_node .
wa_tree_node-folder = text-009.
wa_tree_node-tcode = text-010.
wa_tree_node-text = 'Creditors ageing'.
wa_tree_node-tcode1 = text-011.
wa_tree_node-text1 = 'Creditors ageing'.
wa_tree_node-tcode2 = text-012.
wa_tree_node-text2 = 'Creditors ageing'.
append wa_tree_node to t_tree_node.
clear wa_tree_node .
node-hidden = ' '. " All nodes are visible,
node-disabled = ' '. " selectable,
node-isfolder = 'X'. " a folder,
node-expander = ' '. " have no '+' sign forexpansion.
loop at t_tree_node into wa_tree_node.
at new folder.
node-isfolder = 'X'. " a folder,
node-node_key = wa_tree_node-folder.
clear node-relatkey.
clear node-relatship.
node-text = wa_tree_node-folder.
node-n_image = ' '.
node-exp_image = ' '.
append node to node_table.
endat.
at new tcode .
node-isfolder = ' '. " a folder,
node-n_image = '@CS@'. "AV is the internal code
node-exp_image = '@CS@'. "for an airplane icon
node-node_key = wa_tree_node-tcode.
node-text = wa_tree_node-text .
node-relatkey = wa_tree_node-folder.
node-relatship = cl_gui_simple_tree=>relat_last_child.
endat.
append node to node_table.
at new tcode1 .
node-isfolder = ' '. " a folder,
node-n_image = '@CS@'. "AV is the internal code
node-exp_image = '@CS@'. "for an airplane icon
node-node_key = wa_tree_node-tcode1.
node-relatkey = wa_tree_node-folder.
node-relatship = cl_gui_simple_tree=>relat_last_child.
node-text = wa_tree_node-text1.
endat.
append node to node_table.
at new tcode2 .
node-isfolder = ' '. " a folder,
node-n_image = '@CS@'. "AV is the internal code
node-exp_image = '@CS@'. "for an airplane icon
node-node_key = wa_tree_node-tcode2.
node-relatkey = wa_tree_node-folder.
node-relatship = cl_gui_simple_tree=>relat_last_child.
node-text = wa_tree_node-text2.
endat.
append node to node_table.
endloop.
call method tree->add_nodes
exporting table_structure_name = 'ABDEMONODE'
node_table = node_table.
endmethod.
endclass.
*& Class implementation
class screen_handler implementation.
*& Method CONSTRUCTOR
method constructor.
create object: HTML_VIEWER exporting PARENT = CONTAINER,
LIST_VIEWER exporting I_PARENT = CONTAINER.
endmethod.
*& Method HANDLE_NODE_DOUBLE_CLICK
method handle_node_double_click.
case node_key(12).
when 'Creditors'.
submit YFIIN_REP_CREADITORS_AGING via selection-screen and return.
when 'Vendor'.
submit YFIIN_REP_VENDOR_OUTSTANDING via selection-screen and return.
when 'Customer'.
submit YFIIN_REP_CUSTOMER_OUTSTANDING via selection-screen and
return.
when 'GR/IR'.
submit YFIIN_REP_GRIR_AGING via selection-screen and return.
when 'Acc_Doc_List'.
submit YFIIN_REP_ACCOUNTINGDOCLIST via selection-screen and return.
when 'Bank Bal'.
submit YFIIN_REP_BANKBALANCE via selection-screen and return.
when 'Ven_Cus_Dtl'.
submit YFIIN_REP_VENDORCUST_DETAIL via selection-screen and return.
when 'G/L_Open_Bal'.
submit YFIIN_REP_OPENINGBALANCE via selection-screen and return.
when 'Usr_Authn'.
submit YFIIN_REP_USERAUTHRIZATION via selection-screen and return.
endcase.
endmethod.
endclass.
Program execution ************************************************
load-of-program.
call screen 9001.
at selection-screen.
Dialog Modules PBO
*& Module STATUS_9001 OUTPUT
text
module status_9001 output.
set pf-status 'SCREEN_9001'.
set titlebar 'TIT_9001'.
call method screen_init=>init_screen.
endmodule. " STATUS_9001 OUTPUT
Dialog Modules PAI
*& Module USER_COMMAND_9001 INPUT
text
module user_command_9001 input.
endmodule. " USER_COMMAND_9001 INPUT
*& Module exit_9001 INPUT
text
module exit_9001 input.
case sy-ucomm.
when 'EXIT'.
set screen 0.
endcase.
endmodule.
exit_9001 INPUTyou can read the table node_table with nody key value which imports when docubble click the the tree node (Double clifk event).
Regards,
Gopi .
Reward points if helpfull. -
How to create variant for table/view ?
Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Guhi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
1. On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
2. On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
3. Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
4. If there is more than one selection screen, select the screens for which you want to create the variant
5. Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
6. Enter the desired selection values, including multiple selection and dynamic selection.
7. Choose Continue. -
HOW TO Create variants for transaction MASS on LFA1 object?
hOW TO Create variants for transaction MASS on LFA1 object?
Edited by: cheppalliakr on Nov 10, 2011 1:09 PM
Moderator message: please do more research before asking, show what you have done yourself and provide more information when asking.
Edited by: Thomas Zloch on Nov 10, 2011 3:10 PMHi Oscar ,
You need to create optional date prompt variable in BW which fills your requirement .
Ex : If you require report should always run for 1st of the month to last of month .Then create Optional date variable in BW with interval .write customer exit ,
if from date is left blank it should take 1st of the month and if todate is left blank it should take last of the month .
when creating webi schedules , leave prompts as blank. -
How to get classification for a given material and material type in MM
Hello Friends,
One of my developer colleagues is struggling to find out : how to get classification for a given material and material type in MM?
He is looking for probable table and table fields to Select from.
I would appreciate seriously any help in this regard.
~Yours SincerelyHi
Below given the flow and table details for a given class and class type.
- Table KLAH --> This contains the "Internal class no" [ for the given Class & Class type ]
- Table KSML --> This contains the " internal character numbers " [ nothing but characteristics attached to the class ] , which can be fetched with the above fetched internal class no
- Table AUSP --> This table contains the objects ( material ) attached to the internal characters of that class
- Table CABNT --> This table contains the "Description" for the internal character numbers.
- award points if this is ok -
How to get LASTDAY for each and every month between given dates..
Hi Friend,
I have a doubt,How to get LASTDAY for each and every month between given dates..
for ex:
My Input will be look like this
from date = 12-01-2011
To date = 14-04-2011
And i need an output like
31-01-2011
28-02-2011
31-03-2011
is there any way to achieve through sql query in oracle
Advance thanks for all helping friendsHere's a 8i solution :
select add_months(
trunc(
to_date('12-01-2011','DD-MM-YYYY')
,'MM'
, rownum ) - 1 as results
from all_objects
where rownum <= ( months_between( trunc(to_date('14-04-2011','DD-MM-YYYY'), 'MM'),
trunc(to_date('12-01-2011','DD-MM-YYYY'), 'MM') ) );
The above two query is worked in oracle 11GActually the first query I posted is not correct.
It should work better with
months_between(
trunc(to_date(:dt_end,'DD-MM-YYYY'),'MM'),
trunc(to_date(:dt_start,'DD-MM-YYYY'),'MM')
)Edited by: odie_63 on 12 janv. 2011 13:53
Edited by: odie_63 on 12 janv. 2011 14:11 -
How to implement tooltip for the list items for the particular column in sharepoint 2013
Hi,
I had created a list, How to implement tooltip for the list items for the particular column in SharePoint 2013.
Any help will be appreciatedWe can use JavaScript or JQuery to show the tooltips. Refer to the following similar thread.
http://social.technet.microsoft.com/forums/en/sharepointdevelopmentprevious/thread/1dac3ae0-c9ce-419d-b6dd-08dd48284324
http://stackoverflow.com/questions/3366515/small-description-window-on-mouse-hover-on-hyperlink
http://spjsblog.com/2012/02/12/list-view-preview-item-on-hover-sharepoint-2010/ -
How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?
If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards -
Re: how to get apps for iphone 3g 4.2.1
Re: how to get apps for iphone 3g 4.2.1 all apps support higher version help....
Sep 24, 2013 6:34 AM (in response to Rajmit)
I still have an old 3G which I use mostly as a ipod/radio. By accident I found you can overide the i-tunes block.
1. Select Apps in Apps store icon on the phone.
2. Choose App to download
3. At "Instal" button press it QUICKLY in blocks of 3 presses, keep doing this until it overides the i-tune warning, then if there were legacy versions for os 4.2.1 it says something like "this app is for os 5 or above", but gives you a choice to download an older version. Select this.
Sometimes it says the Apps is for newer hardware, requiring motion sensors, front camera's etc.. just got to accept these ones don't work on legacy hardware.
4. Download does not work for all Apps, esp. newer ones written after os 4.21 or if the developer doesn't have the vintage apps archived- e.g. Instagram downloads, but won't run (wants to update), or WSJ and Barrons stalls and goes through a download loop.
I am not making this up, as I bought this old 3g unit on e-bay, after a complete factory reset I now have:
- Tune-in, FB, Pandora,Skype, Twitter, Bloomberg, MSNBC, Forbes, Marketwatch, Viber, amongst a host of other news apps like LATimes.
Some Apps will download ok, and then at activation says its too old and no longer supported e.g Whats App.
Otherwise, good luck. Tune-in, Pandora, Skype and Twitter is all I need to keep me happy with an old unit, even though I've got newer hardware. Never let anything die unnaturally.I still have an old 3G which I use mostly as a ipod/radio. By accident I found you can overide the i-tunes block.
1. Select Apps in Apps store icon on the phone.
2. Choose App to download
3. At "Instal" button press it QUICKLY in blocks of 3 presses, keep doing this until it overides the i-tune warning, then if there were legacy versions for os 4.2.1 it says something like "this app is for os 5 or above", but gives you a choice to download an older version. Select this.
Sometimes it says the Apps is for newer hardware, requiring motion sensors, front camera's etc.. just got to accept these ones don't work on legacy hardware.
4. Download does not work for all Apps, esp. newer ones written after os 4.21 or if the developer doesn't have the vintage apps archived- e.g. Instagram downloads, but won't run (wants to update), or WSJ and Barrons stalls and goes through a download loop.
I am not making this up, as I bought this old 3g unit on e-bay, after a complete factory reset I now have:
- Tune-in, FB, Pandora,Skype, Twitter, Bloomberg, MSNBC, Forbes, Marketwatch, Viber, amongst a host of other news apps like LATimes.
Some Apps will download ok, and then at activation says its too old and no longer supported e.g Whats App.
Otherwise, good luck. Tune-in, Pandora, Skype and Twitter is all I need to keep me happy with an old unit, even though I've got newer hardware. Never let anything die unnaturally. -
[JS][CS3]how to get refrence for source file
Hi All
I am new and learning javascript Gradually Could any one help on this as i do have a code for load style but don't know how to get refrence for "source file" and "targetDoc"
targetDoc.importStyles(charImport, sourceFile, clashPolicy);
targetDoc.importStyles(paraImport, sourceFile, clashPolicy);
Can any one figure it out
Many ThanksI'm not sure what you are trying to achieve, could you please elaborate?
Do you want to load all the styles from one document into all 100 documents, or do you want all the styles from the 100 documents into 1 document or what is the goal?
The following will let you choose a folder of files, open each of the files in it and import the styles from source document. It is not a complete script, make sure to test and modify before running on anything else than test files :-)
var MyFolderWithFiles = Folder.selectDialog ("Choose a folder");
var sourceFile = File.openDialog("Choose the styles source");
var myFiles = MyFolderWithFiles.getFiles("*.indd");
for(i = 0; i < myFiles.length; i++) {
theFile = myFiles[i];
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;
var targetDoc = app.open(theFile, true);
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.INTERACT_WITH_ALL;
targetDoc.importStyles(ImportFormat.CHARACTER_STYLES_FORMAT, sourceFile, GlobalClashResolutionStrategy.LOAD_ALL_WITH_OVERWRITE);
targetDoc.importStyles(ImportFormat.PARAGRAPH_STYLES_FORMAT, sourceFile, GlobalClashResolutionStrategy.LOAD_ALL_WITH_OVERWRITE);
targetDoc.close(SaveOptions.YES);
Thomas B. Nielsen
http://www.lund-co.dk -
I have canceled my account same day and joining because the convert PDF to word did not convert correctly how to get credit for cancelled membership
You need to contact Adobe Customer Support :
They will check and assist you. (Live Chat)
Contact Customer Care
Maybe you are looking for
-
I'm looking to purchase a new computer for my mother. She is currently using a 10 year old Mac for her home business. The main program she uses is QuarkXpress for typesetting. I don't know much about Mac's. I'm just trying to see which system would b
-
Size of PDF grows after saving in Preview
Greetings, At my work we have a photocopier that also has a scanning feature that emails the scanned document to me as a PDF. I frequently have to make minor edits to the PDFs in Preview--like flip them 180 degrees, delete blank pages, etc. I've noti
-
How to query latency with HistoryVerbose 0
We're using Transactional Replication in SQL 2008R2 SP2 I'm trying to evaluate whether using a HistoryVerbose setting of 0 on the Log Reader and Distribution agents is a worthwhile modification to make, but still need to know Latency in these agents
-
What is "other" in disc space?
My start up disc is almost full, and in researching this I've found "other" to be the major space hog! I've tried deleting unused downloads and apps, cleaned out the trash ( even in iphoto and mail), and even deleted browsing history and cache on sa
-
Exporting DVD with many menues and timelines
I'm creating with some friends an interactive DVD for children. So we've made games such as labyrints, questions based games, and this kind of things. Maybe it was a mistake, but we've done all with Adobe Encore 2.0. I haven't had problems creating t