How to get weblogic logged in username and password in an MBEAN

Hi,
I have an MBEAN deployed under AdminServer. Want to establish a remote connection to credential Store MBean in base_domain using t3 protocol from this MBean, Which requires weblogic username password, port and host.
What is the best way to get username and password,in an MBEans deployed in AdminServer at runtime.
Thanks for your help in advance
-Matz

I don't think there is any way to get the password. What type of credential store is this and is it in the same domain?

Similar Messages

  • How to get to see the usernames and passwords for wifi logins on iPad

    How to get to see the usernames and passwords for wifi logins on iPad. 

    You can't access that on an iPad. The iPad does not have a Keychain Access type app like the Mac has. Maybe an application like iExplorer on your Mac will let you see them, but you can't see them on the iPad itself.

  • I have Iphone 4s, and the phone will activate itself again. How do I get changed Apple ID on my phone so that I get using the new username and password that is verified? I would like an answer as soon as possible ... Thank you very much.

    I have Iphone 4s, and the phone will activate itself again. This I have verified, but when I shall put this onto my phone, so the phone will not approve the newusername and password. How do I get changed Apple ID on my phone so that I get using the new username and password that is verified? Silly to buy a new phone just for this .... The phone is almost three years old. How long can weexpect this to last? I would like an answer as soon as possible ... Thank you very much.

    It sounds like your device might be in Activation Lock.  Is it asking your to enter in an Apple ID & password, but only showing you the first letter of the email address and then some dots? Example: j•••••@icloud.com?
    If so, do you recognize that email?  Do you have an Apple ID that fits the same format?  If so, then go to www.cloud.com, log in with that Apple ID & password, and see if under Find My iPhone it shows this device.  If so, turn off the device, then remove the device from the list.

  • How to retrieve WorkflowContext without passing username and password ?

    Hi,
    I have created a dynamic ApprovalGroup and inside this class i have the following private method.
    private IWorkflowContext fetchWorkflowContext() {
              IWorkflowServiceClient wfSvcClient =
                   WorkflowServiceClientFactory.getWorkflowServiceClient(WorkflowServiceClientFactory.LOCAL_CLIENT);
              ITaskQueryService queryService = wfSvcClient.getTaskQueryService();
              IWorkflowContext workflowContext;
              try {
                   workflowContext =queryService.authenticate("weblogic", "weblogic1".toCharArray(), null);
                   } catch (WorkflowException e) {
                   e.printStackTrace();
    But when i retrieve workflowContext, I have to pass username and password.As this dynamic ApprovalGroup class will be deployed on the same SOA server under D:\Oracle\Middleware111150\Oracle_SOA1\soa\modules\oracle.soa.ext_11.1.1
    I have kept wf_client_config.xml under D:\Oracle\Middleware111150\Oracle_SOA1\soa\modules\oracle.soa.ext_11.1.1\classes.
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <workflowServicesClientConfiguration
    xmlns="http://xmlns.oracle.com/bpel/services/client">
         <server name="default" default="true" excludeFromFederatedList="true">
         <localClient>
              <participateInClientTransaction>false</participateInClientTransaction>
         </localClient>
         <remoteClient>
              <serverURL>t3://localhost:8001</serverURL>
              <userName>weblogic</userName>
    <password>weblogic1</password>
              <initialContextFactory>weblogic.jndi.WLInitialContextFactory</initialContextFactory>
              <participateInClientTransaction>false</participateInClientTransaction>
         </remoteClient>
         <soapClient>
              <rootEndPointURL>t3://localhost:8001</rootEndPointURL>
              <identityPropagation mode="dynamic" type="saml">
                   <policy-references>
                   <policy-reference enabled="true" category="security" uri="oracle/wss10_saml_token_client_policy"/>
                   </policy-references>
              </identityPropagation>
         </soapClient>
         </server>
    </workflowServicesClientConfiguration>
    How to retrieve WorkflowContext without passing username and password ?
    ============================
    workflowContext =queryService.authenticate("weblogic", "weblogic1".toCharArray(), null);
    ============================
    regards.
    Edited by: user10303338 on Oct 5, 2011 1:51 AM

    Use :
    Properties prop = System.getProperties();
    prop.put("proxySet","true");
    prop.put("http.proxyHost","yourProxy");
    prop.put("http.proxyPort","8080"); // change the port
    //prop.put("https.proxyHost","yourProxy");
    //prop.put("https.proxyPort","8080"); // change the port
    Denis

  • HT4530 I just purchased an iMac and developed a user name and password.  I'm trying to install a program but can't because I forgot that information and didn't write it down.  How do I reissue a new username and password

    I just purchased an iMac and upon setting it up I initiated an username and a password.  Unfortunately I didn't write it down and now I'm trying to add software and the system won't let me because I forget that info.  How do I reissue a new usernam and password?

    Boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” and press return. A Reset Password window opens.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password.
    Select  ▹ Restart from the menu bar.
    You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

  • I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

    I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

    I'm having a very similar problem.
    I'm based in the U.K. and am trying to publish an iBook through the iTunes bookstore. I have made my book in iBooks author 2.0. My iTunes is up to date.
    When I try and publish the iBook I have passed and ticked the Pre Publish Check; and the Create Account, but when I try and download iTunes Producer through iTunes Connect I'm told "Your Apple ID does not have permission to access iTunes Content."
    When I try and re-set my iTunes Store account I'm told "The iTunes Store Account has already applied to distribute content on the iBookstore." Of course it has I just did that.
    If I try and sign in to iTunes Connect through the Publishing pane I'm told "Your ID or Password was entered incorrectly." Even though I've just used it to sign into iTunes (and here), so my password and Apple ID work fine elsewhere.
    Is my access to the iTunes Connect being delayed while my submission is processed, i.e. the processing of my tax and account details? Or am I stuck in a loop?
    If this is still processing (I started this 20 hours ago) I assume that I have to submit the book itself when I can download iTunes Producer at a later date, as I haven't submitted the book yet?
    I emailed the problem to iTunes Store and was refered to [email protected], only for them to say they don't read or reply to emails sent to that address??????
    I'm not sure which part of the process I've reached - if any. I feel I'm in limbo. I have an iBook ready to go - but where is Apple?
    Any help would be most welcome.
    Andy

  • Why is it that I can't sign in on facetime, but I can sign in on app.store? With facetime,I'm getting an error, invalid username and password eventhough I have typed exactly the same when I'm signing in on the app.store. pls.help, thanks

    Why is it that I can't sign in on facetime, but I can sign in on app.store? With facetime,I'm getting an error, invalid username and password eventhough I have typed exactly the same when I'm signing in on the app.store. pls.help, thanks

    1. Make sure software is up to date
    2. Make sure FaceTime is enabled; Settings>FaceTime
    3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
    4. Make sure Push Notification is enabled
    5. Make sure phone number or email address is correct
    6. Hold the Sleep and Home button down (together) until you see the Apple Logo

  • How can I changed the system username and password

    How can I changed the system username and password
    Need help urgent

    Paolo,
    If I understand his requirement good (to have system user but must be called xxxx) then that's the option.
    Well, that's obvious...Sure, but sometimes we see complicated thing but not something what is obvious...
    Also your demonstration to OP how to change user password indicate that OP-level of knowing Oracle user management is such that OP maybe need help for something what is for you or me obvious...
    Cheers!
    Message was edited by:
    Faust

  • How to get the logged in username or how to set the acquiredby?

    We are using BPEL 10.1.2.0.2.
    We have implemented CAS/OID to work with the TaskList. Our issue is with obtaining the logged in username while in the BPEL Workflow. Acquired by variable is not populated even after the task is acquired. Explicitly setting Acquired By doesn't work either (still comes as null).
    This might be something quite simple, but I am not able to figure it out. Is there a way to get the logged in username or the user who acquired the task while in the BPEL workflow?
    Thank you!

    I have no longer access to the custom worklist application of 10.1.2 but in 10.1.3 you can access it through:
    SessionStore sessStore = SessionStore.getInstance(request.getSession(false));
    String userName = ((IWorkflowContext) sessStore.get(WorklistappConstants.SESS_ATTR_WORKFLOW_CONTEXT)).getUser();Kind Regards,
    Andre

  • How do I add a SITE, USERNAME, and PASSWORD to the list in - Tools/Options/Security/Saved Passwords ?

    How do I force Firefox to remember and use my username and password for a site ?

    #Tools -> Options -> Security - tick "remember passwords"
    #Log in to a website
    You should be asked to save the user name and password upon login.

  • Getting Pooled Connection with username and password

    hi,
    I am facing problems in getting pooled connections to MYSQL
    database.I am using Tomcat server.
    I tried the example given in Tomcat doc "JNDI how to", it
    works fine with one set of username and password which is
    given in server.xml. Now can anybody guide me thru the steps
    to get pooled connections to the same database with multiple
    username and passwords.
    Thankyou all in advance

    Now can anybody guide me thru the steps to get pooled
    connections to the same database with multiple
    username and passwords.Nope. Can't be done -- at least not that I've seen yet.
    Database/JDBC driver vendors seem unconcerned, or don't
    care about this scenario. I ragged on Informix years
    ago for this very feature. It should would make database
    admins jobs a lot easier if they could know "who" that
    connection belonged to that is running the outrageous
    SQL query without having to divine it by way of tracing
    socket/IP connections back thru the network to some machine.
    The only way I've seen to do it is to create your own
    connection pool code that handles user/password connections.
    -- but then the problem becomes you have a collection of
    mini-pools for each user. i.e. if you have 200 users, you
    end up with 200 connection pools with a couple/few connections
    in each sub-pool. Kinda defeats the purpse.
    So, apparently, everybody just deals with the single
    "generic" user/password connection pool.

  • How can I change the admin username and password

    how can I change the default admin adminadmin username and password for the server

    What version of Creator are you use?
    In Creator 2 Update 1, using Application Server version 8.2, you can do the following..
    1) Log into the Admin Console using the default UID/PWD
    2) Expand the tree view by following this path:
    Application Server > Configuration > Security > Realms > admin-realm
    3) Click on "Manage Users"
    4) Click on the UserID "admin"
    5) enter the new password that you would like
    6) Click on the "Save" button on the upper right side of the page.
    That should do it for you.
    Good luck

  • I couldn't access a website because I used an incorrect username and password.How do I reaccess with correct username and password. Thanks.

    Getting into Avenue5Consulting members only area, I mistakenly used my other username and password. A message came up asking if I wanted to save it and I pressed yes. This didn't open the site, but brought me back to login page. Realizing that I logged in with erroneous username and password, I checked and logged in again with the right username and password, but these were not accepted. Please help! I need to get back to the site to finish my homework!
    Will greatly appreciate your support.

    That issue can be caused by corrupted cookies.
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    *http://kb.mozillazine.org/Cookies
    *http://kb.mozillazine.org/Websites_report_cookies_are_disabled

  • How to use cfmail without specifying username and password??

    Hi pp,
    i have been trying to use the cfmail functionality to send and receive e-mails connecting to the smtp server of <MyUniversity>
    i am creating a page where, at the end a e-mail has to be sent from <[email protected]> to <[email protected]>
    i am connecting with the univ server from the cf server to test whether the e-mails are delivered.
    the e-mails are sent only if i mention the <Username> and <Password> fields belonging to the <[email protected]>
    for my test case i used my own id and the if i set the username and pwd, the e mails are sent, otherwise the emails are not getting delivered.
    can someone suggest why this is happening and i have to make sure that at the end of launching the site, i dont have to get the username and password, because i will not be given access to it as a developer.
    Please suggest me wat to do.
    i am using the simple cfmail function.
    <cfmail
                server="smtp.<univ>.edu"
                port="25"
                from="[email protected]"
                username="[email protected]"
                password="**********"
                to="[email protected]"
                subject="testing testing">
                       <testing the mail functionalities>
    </cfmail>

    Use :
    Properties prop = System.getProperties();
    prop.put("proxySet","true");
    prop.put("http.proxyHost","yourProxy");
    prop.put("http.proxyPort","8080"); // change the port
    //prop.put("https.proxyHost","yourProxy");
    //prop.put("https.proxyPort","8080"); // change the port
    Denis

  • How do I delete my Twitter username and password from iPhone 4?

    I upgraded to iOS5, and when i was setting it up I put in my username and password but I thought it was just for the App and not in the settings of the iPhone itself. Every time I delete the account under setting, it comes back! Why?
    I do not have the official Twitter app, I use Echofon.
    And every now and then my Twitter account comes back to the setting after i delete it. I really want it gone for good from the iPhone's setting.
    Can you please help me? And please provide instruction, they would be greatly appreciated. Thank you!

    Try this, I did it on an iBook that someone gave to me because it was slow.
    1. Reboot
    2. Hold apple key + s key down after you hear the chime. (command + s on newer Macs)
    3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
    mount -uw /
    rm /var/db/.AppleSetupDone
    shutdown -h now
    4. After rebooting you should have a brand new admin account. When you login as the new admin you can simply delete the old one and your good to go again!
    Apple stores wont reset it for you. Computer shops may charge you $50 to $200 trying to reinstall the Mac OS and failing at end.
    NOTE:  This will not work with the classic OS, only OS X.
    What this does is tricks the Mac into thinking that OS 10.? was just installed. It will play the intro video and then guide you through setting up your new account.

Maybe you are looking for