How to get WRT54GS2 to assign a static IP?

I have a PAP2 VOIP adapter plugged into my Linksys WRT54GS2 router. The problem is the router assigns the PAP2 a new dynamic IP every couple days, which messes up my port forwarding settings.
So I need to tell the router to assign the PAP2 a static IP that never changes. How do I do this?
thanks...

Linksys calls this feature "IP Address Reservation" which is not supported on your WRT.
The only thing you can do is to configure a static IP address on the PAP2 directly.

Similar Messages

  • How to get the value assigned in dropdowmlistbox as well as radio button

    Hi Everybody,
       Please help me to find the solution for the following:
       1. How to get the value assigned in dropdowmlistbox?
       2. How to get the value assigned in radio button?
      I am waiting for the answer and reply...
      Thanks & Regards,
      ShanthaKumar.KA.

    The radio button has a name attribute. That name attribute should be the same as the bean property. Then you just need a
    <jsp:setProperty name="mybean" property="*"/>
    and the bean's set method will be called for the value of that radio button.
    so...
    <input type="radio" name="doit"/>
    class MyBean
    public void setDoit( boolean yes )
    //do whatever here
    }

  • How to get Characteristic Values assigned to the line item of Sales Order?

    Hi,
    I want to get the Characteristic Values( Variant Configuration )assigned to First Line Item of Sales Order.
    I was using the Fn. Mod.: VC_I_GET_CONFIGURATION_IBASE,
    this fn. mod. giving all the Characters but not the assigned characteristic values.
    Is there any other way to find characteristic values of sales order.
    Thanks,
    vinayak.
    Message was edited by: vinayaga sundaram

    For example, please see this example program.
    It lists the characteristic names, the values, and the description of the values which are tied to a sales document.
    report zrich_0001.
    * Internal Table for Characteristic Data
    data: begin of i_char occurs 0.
            include structure comw.
    data: end of i_char.
    data: xcabn type cabn.
    data: begin of xcawn,
          atwtb type cawnt-atwtb,
          end of xcawn.
    data: xvbap type vbap.
    parameters: p_vbeln type vbap-vbeln,
                p_posnr type vbap-posnr.
    start-of-selection.
      select single * from vbap into xvbap
                 where vbeln = p_vbeln
                   and posnr = p_posnr.
      clear i_char.  refresh i_char.
    * Retrieve Characteristics.
      call function 'CUD0_GET_VAL_FROM_INSTANCE'
           exporting
                instance           = xvbap-cuobj
           tables
                attributes         = i_char
           exceptions
                instance_not_found = 1.
      loop at i_char.
        clear xcabn.
        select single * from cabn into xcabn
                 where atinn = i_char-atinn.
        clear xcawn.
        select single cawnt~atwtb into xcawn
                   from cawn
                     inner join cawnt
                       on cawn~atinn = cawnt~atinn
                      and cawn~atzhl = cawnt~atzhl
                          where cawn~atinn = i_char-atinn
                            and cawn~atwrt = i_char-atwrt.
        write:/ xcabn-atnam, i_char-atwrt, xcawn-atwtb.
      endloop.
    Regards,
    RIch Heilman

  • How to get or change the ip address of MAXDB database node ?

    Good morning,
    I am having a problem configuring a sap server that is running on a SUSE enterprise linux VMWARE image, the image itself is delivered paused with the server running already but when i shut it down to change hardware configuration and then restart it, the sap server doesnt start, the startsap command gives the error "DB startup failed" i traced the  startdb.log file and found that it "failed to connect to server socket" after more searching i found out that it is possible that the ip defined in the /etc/hosts file for my node is getting changed after restart since i am able to start the database itself using dbmcli command the problem is still connecting to the node, i would like to know how to get the newly assigned ip address for the node so i can put it in the hosts file or a way to keep its ip static between restarts of the OS, any help is appreciated.

    Hi,
    This is SAP Business one system administration forum. Please find correct forum and re-post your discussion to get quick reply.
    Please close this thread by marking helpful answer.
    Thanks & Regards,
    Nagarajan

  • How do I assign a static IP address?

    I bought mSecure from mSeven Software for my iPhone. Had no problem assigning a static IP address to my old PC laptop, but now I've happily switched to Macbook Pro and I can't figure out how to get it done. Need this static IP address to sync my iPhone data to the Macbook Pro. Found something that said I needed to go to "server admin" but I can't figure that out either. I do see how to find my IP address (in system preferences), but I'm not sure how to assign a static address. I'm not the most computer literate person in the world, but I'm fairly teachable - can somebody walk me through this step by step (including what buttons to push to get where you guide me)? Much obliged.

    Oh great, forum notifications have grown funky again.
    As I understand your question, each client (whether it's a router or not) can be configured to receive its IP address via DHCP, or not. In the latter case you specify its IP address manually in the client. I can't think of a TCP/IP client that does not have this ability.
    There is no way to use AirPort Utility to assign specified IP addresses to clients, though you can "reserve" a block of addresses that it will not assign via DHCP.
    You can assign an IP address to a client using a directed IP packet, using Terminal (must be run as superuser):
    arp -s <desired IP address> <client MAC address>
    ... but this does not create any entries in the AirPort's MAC address table. Is that what you want to do?

  • How to get a value from  select one choice (created by static view)

    Hi,
    Whene ever Iam trying to get value from select one choice which is created by static view iam getting only index.How to get the actual value in 11g .please help me anybody .Thanx in advance....
    Edited by: 874530 on Jul 22, 2011 11:05 PM

    Thnax for your quick reply..
    Iam using 11.1.1.3.0 version.
    My code is
    <af:selectOneChoice value="#{bindings.DenialLevel.inputValue}"
    label="#{bindings.DenialLevel.label}"
    required="#{bindings.DenialLevel.hints.mandatory}"
    shortDesc="#{bindings.DenialLevel.hints.tooltip}"
    id="soc2"
    valuePassThru="true"
    binding="#{backing_denialcomment.denialLevelList}">
    <f:selectItems value="#{bindings.DenialLevel.items}" id="si6"/>
    </af:selectOneChoice>
    and in bean am not able to get value of attribute .Iam getting only index...

  • How to Assign a Static IP address to VM created from VM template

    Hello All,
                I'm New to SCVMM, I have installed my SCVMM 2012 R2 in Lab environment and added 02 Hyper Servers on the same (One server is in domain & another one is in Perimeter Network). Once I added the Hyper-V's two Virtual
    Network's has been detected in SCVMM.
               Now I'm trying to create a new VM in each Hyper-V with a static IP address. I have created the VM template without connecting to any network, while creating the VM, below is my settings,
    VMNetwork : VMPeri01 (Perimeter VM Network)
    VM subnet  :  None
    (Grayed out)
           IP Address:
              Clicked Static IP
                          IP Protocol version: IPV4 only
    MAC address:
              clicked Static (its showing 00:00:00:00:00:00)
    Question: How can I assign the static IP to my New VM?
    Note: I have created a static IP pool for the virtual network (w.r.t : http://www.virtualizationadmin.com/blogs/lowe/news/adding-an-ip-pool-to-vmm-2012-241.html)
    Please help me to create the VM using Static IP (specific address now)

    While creating the VM choose the Virtual Network on the Hyper-V from the IP pool which you have created it wil take the IP during provisioning.

  • How to get group key from a task assignment adapter

    Hi All,
    Senario:
    I have two groups, say G1 and G2.
    One Access policy, say P. (This access policy is associated with AD resource.)
    AD Resource Object R.
    I have defined an Approval process for Resource R.
    Access policy P is assigned to both Group G1 and G2.
    This Access Policy P is linked to Resource R
    According to above configuration,
    When I add User U1 to Group G1 ( or G2 ) through "Group Membership", Access Policy P is executed and the approval process which associate with the Resource R is executed.
    In my Approval process, I have a task assignment adapter.
    Within my adapter, I want to get the group key, which cause to fires this approval process. ( It may be G1's key or G2's key. )
    Could some one help me for this ?
    Regards,
    Thirlk
    Edited by: thirlk on Jun 28, 2009 10:55 PM

    See this thread
    Working on the same requirement.
    How to get the administrator group of a group from a approval process
    If you have any further question let me know.

  • How to get the list of application instance assigned to user

    Hi,
    I need to run the query in BI publisher to get the list of all the application instance assigned to a user in OIM 11g R2.
    Please let me know how to get this data. Also please let me know what is the table to see the list of application instance in OIM.
    Thanks

    Got this working..
    The table is APP_Instance to get the details of Application Instance present in OIM.

  • How to get the list of roles assigned to a user in all the child systems

    how to get the list of roles assigned to a user in all the child systems from CUA SYSTEM

    Try transaction SUIM in your CUA system. Go to user, cross-system information, users by roles. If you run it wide open, you'll get all users and all roles assigned for all systems managed in your CUA.
    Krysta

  • How to get static IP address in adobe 2.0 beta ?

    Actually I am trying to get the static IP address as soon as the
    internet is connected .How to get the static IP address from air application ?
    Regards,
    Rahul.

    Try this (you need AIR 2 SDK):
    var interfaces:Vector.<NetworkInterface> = new Vector.<NetworkInterface>();
    interfaces =  NetworkInfo.networkInfo.findInterfaces()
    for each (var netf:NetworkInterface in interfaces)
                          var addresses:Vector.<InterfaceAddress> = netf.addresses;
                          for each(var interfaceAddress:InterfaceAddress in addresses)
                                             trace(interfaceAddress.address);

  • How to get the static C-MAC?

    I want to upload applet to card by apdu command I know that EXTERNAL AUTHENTICATE command must pading the MAC which generate from the static C-MAC
    i have read the GP2.1 spec ,but i still dont know how to get it.
    Can someone here help me?

    halfcandy wrote:
    I want to upload applet to card by apdu command I know that EXTERNAL AUTHENTICATE command must pading the MAC which generate from the static C-MAC
    i have read the GP2.1 spec ,but i still dont know how to get it.
    Can someone here help me?Hi,
    What is the problem you are having? Is it deriving the session key from the static key? Which secure channel protocol are you trying to use?
    This thread may help: [http://forums.sun.com/thread.jspa?threadID=5271141]
    Cheers,
    Shane
    Edited by: safarmer on 14/08/2008 14:11

  • How to get current assigned participant id?

    Hi mates,
    This might be a basic questions, but useful for me :)
    How to get current assigned participant id from screenflow? Or How to pass it as an argument from interactive activity?
    Below is what I tried.
    Participant.id or Instance.participant.id - returns login user id
    Thanks

    Hi,
    Please correct me if I understood wrong.
    You want to know whether an instance is assigned or not and if assigned then you want to fetch the assigned participant id.
    If this is your requirement then please find the code below and make the necessary changes into it.
    Write the following code in screen flow automatic activity but before that you need to pass the instanceid as argument to the screen flow.
    In the process as well as screen flow layer make an instance variable instanceid as Int.
    Then make an argument variable instanceidArg as Int in both the screenflow and process layer and map accordingly so that it will take the instanceid from process layer to the screen flow layer.
    Assign instanceid = id.number; in process layer automatic activity but before the global interactive activity where you have maped the screen flow.
    Write the following code in screen flow automatic activity.
    logMessage("============= instanceid ==============" + instanceid); //instanceid is the id of the instance that you have passed from process layer.
    ProcessService ps;
    InstanceFilter instF = InstanceFilter();
    ps.connectTo(url : Fuego.Server.directoryURL, user : "<userid>", password : "<password>"); //In studio the userid and password will be same
    logMessage("Connected");
    instF.create(processService : ps);
    instF.searchScope = SearchScope(participantScope : ParticipantScope.ALL, statusScope : StatusScope.ONLY_INPROCESS);
    //<ProessId Name> is the id of the process where you want to know the assighed participant id
    instF.addAttributeTo(variable : VarDefinition.processid, comparator : Comparison.CONTAINS, value : "/" + "<ProessId>");
    instF.addAttributeTo(variable : VarDefinition.INSTANCE_NUMBER, comparator : Comparison.IS, value : Int(instanceid));
    Fuego.Papi.Instance[] instances = getInstancesByFilter(ps, filter : instF);
    foreach (instance in instances) {
    logMessage("Assigned ?: " + instance.participantId.empty);
    logMessage("instance.participantId: " + instance.participantId);
    ps.disconnectFrom();
    Bibhu

  • How to get the obiee dashboard secuirity in adf to assign the roles in adf for users

    how to get the obiee dashboard secuirity in adf to assign the roles in adf for users

    thanks Benjamin...
    my present requirement is pull Role to Dashboard mapping from OBIEE Catalog
    in my project we are going to restrict the users and assigning the roles from adf.
    Pls Help me..

  • HT5422 How to get an better screen-update? The view on the remote Mac is nearly static.

    How to get an better screen-update? The view on the remote Mac is nearly static.

    You can try reducing the bit depth of the screen image  via the slider in the upper-right of the Control window. If that doesn't help, you may just not have a sufficiently fast network connection to correctly handle the data transfer necessary. This is often the case if you're connecting across the Internet. What is your network speed between the administration system and the client?
    Regards.

Maybe you are looking for