How to get XLR to show BPs with no transaction data for a given date range

Hi -
I am building an XLR report that does a comparison of net sales data across two periods for a given sales employee's BPs.
The report has the row expansion:
FACT BPA(*) SLP(SlpName = "ASalesPersonNameHere") ARDT(Code = "ARCreditMemo", "Invoice") Group by BPA.CardName
and column expansions:
FIG(SO_TaxDate = @StartDate:@EndDate)
and
FIG(SO_TaxDate = @StartDate2:@EndDate2)
where @StartDate, @EndDate, @StartDate2, @EndDate2 are parameters that define the two ranges of dates.
The column formulas are, from left to right:
=ixDimGet("BPA", "CardName")
=ixGet("SO_DocTotal") <-- filtered by column expansion for first date range
=ixGet("SO_DocTotal") <-- filtered by column expansion for second date range
The report works fine except for one problem, I would like it to include BPs for which no transaction occurred in either date range as well.
Any help is greatly appreciated!
Thanks,
Lang Riley

Really appreciate your feedback! Those are good suggestions. I should have mentioned that I had already tried both those suggestions.
Removing FACT on BPA in this case ends up returning all the BPs and not respecting the SLP(SlpName = "aName") part of the query.
Using **, i.e., * or #NULL, makes no change in the resulting data in this case. I had thought that ** would be the solution, but it didn't change the outcome. I still have BPs for which when their sales employee is used as the filter and they have no transactions for either date range, and yet they still do not appear.
I should further mention that the IXL query, as it now stands, does return BPs for which one of the periods has no data, just not both, and I have verified that applicable BPs with no transaction data for both periods do exist in my data set. It seems that perhaps the IXL query needs to be restructured? Please keep the suggestions coming including how this query might be restructured if necessary.

Similar Messages

How to get the total time spent by a Portal User for a given Date?

Hello,
We need to develop a Daily Audit Track Report that displays
the Users logged into our System for a given day and the total login duration in Hours( should include all the
Login-Logouts of a given date).
While Portal30_SSO.WWSSO_AUDIT_LOG_TABLE$ can help me get the Users login to Portal for a day, there is no Login/Logout periods in it.
Any help would be appreciated.
Thanks
Madhav

You may want to consult with the view WWLOG_ACTIVITY_LOGS. Not sure how your environment is configured, but ours includes two WWLOG_ACTIVITY_LOG tables (1 & 2). These tables purge themselves based on your configuration. In other words, Portal will log activity in WWLOG_ACTIVITY_LOG1$ for a certain period of time, then switch to WWLOG_ACTIVITY_LOG2$ while purging the first one. You can specify the purge timetable in the Adminster tab of the Admin page (under Global Settings). If you just key on just 1 log table, you're logs may someday go blank.
The actions used are 'login' and 'logout'. You can link the actions using the key_1 and key_2 columns of the view. From our current experience, Portal does not account for users that simply close the browser. In other words, we have not been able to get a log event for the action 'logout' for the same key_2 value if someone does this.

HT2931 I am trying to figure out how to get the pre made "beats" with my garage band for my MacBook Air can u help

I am trying to figure out how to get the pre made "beats" with my garage band for my MacBook Air can u help

Hello Mattxy2,
Thank you for the question. It sounds like you would like to add some Apple Loops to your project. I recommend reviewing the following sections in Garageband Help:
GarageBand Help - Search for Apple Loops
http://help.apple.com/garageband/mac/10.0/#gbnd3002ab64
GarageBand Help - Add Apple Loops to your projects
http://help.apple.com/garageband/mac/10.0/#gbndc1d3db81
Thank you for using Apple Support Communities.
Best,
Sheila M.

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

HT4623 so when i plug any of my devices into laptop windows recognizes it but itunes wont. how to get itunes to show device pluged in

so when i plug any of my devices into laptop windows recognizes it but itunes wont. how to get itunes to show device pluged in

Hello, joegoducks.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

Im in the caribbean and we speak english but netflix shows everything in spanish or some other foreign language and im clueless about how to get it to show in english

i am in the caribbean and we speak english but netflix shows everything in spanish or some other foreign language and im clueless about how to get it to show in english can someone please help me with this issue

bump

How to get online apps to work with the Verizon DSL modem firewall set at "Medium" level, not "Low?"

How to get online apps to work with the Verizon DSL modem firewall set at “Medium” level? Xbox 360 Live, FTP, and the Windows sntp Time checker native to Windows XP WON’T WORK unless the Verizon firewall is first reset down to “Low.” Then all works well, but I then risk low firewall protection. Setup: · Westell 6100 DSL modem (Software Version: VER:4.04.03.00 Transceiver Revision: 7.2.3.0 Model Name: C90-610015-06), · D-Link DIR-655 wireless router (Hardware Version: A3, Firmware Version: 1.21), For Xbox 360 Live the “canned” port forwarding rule for provided in Verizon’s drop-down list for the Westell 6100 modem forwards ports 88 and 3074 for both TCP and UDP. This does not meet Microsoft’s forwarding recommendations for Xbox 360 Live stated at http://support.microsoft.com/kb/908874. Instead, for the Verizon modem (Westell) I made a new port forwarding rule to comply with those Microsoft instructions. It forwards ports 53, 80 and 3074 for TCP and ports 53, 88 and 3074 for UDP. These same ports are also forwarded in the D-Link router configuration. For FTP, port 21 is also forwarded for TCP and UDP in both modem and router. But they don’t work until I first cripple the Verizon firewall down to “Low.” How to get them to work with the Verizon firewall up to Medium?

While I do not know the answer to your question, BUT since you have this modem and another router - you could just follow.
http://www.dslreports.com/faq/13600
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

How to get real value from selectOneChoice with javascript?

Hi,
How to get real value from selectOneChoice with javascript? The event.getNewValue() only gets me the index of the selected item, not the value/title.
JSF page:
<af:resource type="javascript">
function parseAddress(event)
alert("new value: " + event.getNewValue());
</af:resource>
<af:selectOneChoice label="Location:" value="" id="soc4">
<af:clientListener type="valueChange" method="parseAddress" />
<f:selectItems value="#{Person.locations}" id="si7"/>
</af:selectOneChoice>
HTML :
<option title="225 Broadway, New York, NY-10007" selected="" value="0">225 Broadway (Central Office)</option>
<option title="90 Mark St., New York, NY-10007" value="1">90 Mark St. (Central Office)</option>
Thanks a lot.

Something I was missing ,
You need to add valuePassThru="true" in your <af:selectOneChoice component. I have personally tested it and got the actual value in alert box. I hope this time you got the real solution. You can also test the following code by your end.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:form id="f1">
<af:panelBox text="PanelBox1" id="pb1">
<af:selectOneChoice label="Set Log Level" id="soc1"
value="#{SelectManagedBean.loggerDefault}"
valuePassThru="true">
<af:selectItem label="select one" value="First" id="s6"/>
<af:selectItem label="select two" value="Second" id="s56"/>
<af:clientListener method="setLogLevel" type="valueChange"/>
</af:selectOneChoice>
<af:resource type="javascript">
function setLogLevel(evt) {
var selectOneChoice = evt.getSource();
var logLevel = selectOneChoice.getSubmittedValue();
// var logLevelObject = AdfLogger.NONE;
alert("new value is : " + logLevel);
//alert(evt.getSelection);
//alert(logLevelObject);
evt.cancel();
</af:resource>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>

My old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?

my old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?

Hello gpbondi,
The following article provdies step-by-step instructions for downloading your purchases both in iTunes and on your devices.
Download past purchases
http://support.apple.com/kb/HT2519
Cheers,
Allen

Acrobat X Pro. How to get tab to show up in Microsoft Office ribbon?

Acrobat X Pro. How to get tab to show up in Microsoft Office ribbon?

Hi ebender888,
Which Office version are you using?
If it's Office 2013 then Acrobat 10 pdfmaker is not compatible.
Please refer: http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html#main_ PDFMaker_compatible_applications
Regards,
Rave

How to get kensington K9294 to connect with original iPad. Bluetooth is on.

How to get Kensington K9294 to connect with original iPad. Bluetooth is on.

Sorry, but what is a Kensington K9294? I can find no mention of that product ID on the web, not even on Kensington's site. Do you mean the K39294, the KeyFolio keyboard/case?
Regards.

How to get standalone Oracle HTTP Server with mod_plsql?

Hi,
I do not know if it is just me but it seems to be a nightmare to get OHS with mod_plsql from the official OTN download site. I downoaded the companion CD for Windows - 3 disks, installed OHS - no mod_plsql. Then I tried to find any clue on OTN on how to download mod_plsql - none. Plenty of information on how to configure it and use it, but nothing on how to get it.
PLSQL gateways is not an option for us because many of our clients do not allow direct communication between the database and the Internet.
Windows 2003 Server R2
Apex 3.2.1
RDBMS 10.2.0.4
Any help appreciated,
WK
PS.
I would not like to download the software from unofficial sites but rather get it straight from Oracle.

Hi,
For those interested: I found Oracle HTTP Server with mod_plsql on OTN -> downloads -> middleware -> WebCenter suite.
WK

How to get string from jtextpane along with its attributes

sir,
How to get string from jtextpane along with its attributes
i,e font,size,style,color etc.
please help me out.
my mail id is [email protected]

JTextPane extends JTextComponent
JTextComponent.getDocument()
a Document is a set of Element, see Document.getRootElements(). Each Element has attributes, stored within an AttributSet object see Element.getAttributes()
a Document can also be rendered as a String, see Document.getText( offest, length ), use it with 0 and Document.getLength() as parameters.

How to Set JFilechooser to show file with the same extension in the filetyp

How to Set JFilechooser to show file with the same extension in the filetypes??
help

I also don't understand, but if you mean how to display only files with a certain extension in your JFileChooser then you should have a look at the JFileChooser API:
http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/JFileChooser.html
The introduction shows an example of how to do that.

Holidays: how to get them to show up on my iCal

Anybody know how to get iCal to show holidays. Is there a "show holidays" box to check? I'm not seeing it if there is. If not, is there some place to import them from?
Thanks

Pianafiddle,
iCal>Calendar>Find Shared Calendars... will connect you to Apple - Mac OS X - ICal - Library, where you can select and subscribe to a Holiday Calendar.
You can also go to ICalShare to find additional Holiday calendars.
;~)

How to get XLR to show BPs with no transaction data for a given date range

Similar Messages

Maybe you are looking for