How to give color to the display of keyfigure based on condition using exception.

Dear Friends.
   I am trying to color "BAD3" in exception based on condition but my problem is in exception I can have only formula variable to compare the value, How to assign a value to formula variable in BEx Query designer.
What I am trying to do is :
   in Query designer :
   I have PO Quantity and Delivered Quantity.
if PO Qnantity > Delivered Quantity
    then Delivered Quantity field should be colored as "BAD3" in exception.
but here proble is in exception
I have alert level , operator, and value fields for Delivered Quantity keyfigure ( Under definition tab - Exception is defined on = Delivered Quantity ).
but for value field I dont have PO Quantity for that I have to supply one formula variable,
When I created a forumula and did this way
FV_PO_QUANTITY = PO_QUANTITY formula editor throws errors. I dont understand How to assign a value of key figure to formula variable and use it in EXceptions.
Please help me How I can solve my problem
I will greatly appreciate your any help.
Thanking you
Regards
Naim

Thank you so much for your replies,
I did following way and it helped me to solve my issues.
I created one formula and under formula I use boolean < funtion to compare the values.
like following way.
( 'PO Quantity' > 'Delivered Quantity' ) * ( FV_PO_QNT + PO_QUANTITY')
here fv_po_qnt is formula variable I supply that variable to exception and since I have the value in it.. it compares with Delievered Quantity value and colored the perticular cell.
Thanks again for your replies
Regards
Naim

Similar Messages

How to give colors to the top-of-page in ALV List Display

how to give colors to the top-of-page in ALV List Display....

Check this blog.........
It provides your required output...........
/people/vijaybabu.dudla/blog/2006/07/21/topofpage-in-alv-using-clguialvgrid
See the point 7 for complete code...
Regards,
Pavan

How to give colors to the top-of-page in ALV Grid

How to give colors to the top-of-page in ALV Grid
in table GT_LIST_TOP_OF_PAGE i am filling 3 rows ,i need 3 different colors to be displyed on top-of-page(one color to one row)
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
I_LOGO = 'ENJOYSAP_LOGO'
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
please help mee

HI Kranthi,
Check out teh foll. link,
http://www.sapfans.com/forums/viewtopic.php?t=52107
Hope this helps.

How to change color of the caret (text cursor) in a TLFTextField used for input.

This might be a very simple Question, but I have looked and searched everywhere and don't find how to change the color of the caret in a input TextField.
any ideas?
Thank you in forward.
GV

This was driving me crazy, too--and the previous answers did not seem to work. I eventually found that if I click one of the data symbols in the graph in exactly the right spot (see below), it selects only the data symbols and not the line. I can tell this because the little selection dots will be around each data symbol, but no selection dots will be on the line between the data symbols - like the graphic in Yvan's answer. Then and only then will the color symbol in the tool bar show the color of the data symbol, instead of the color of the line. I believe that you then have to first click on the color swatch in the toolbar and then select your color (or choose Show Colors and select from the color tool). Just clicking a color in the crayon box, for example, did not seem to work unless I first clicked on the color swatch in the toolbar, then clicked Show Colors on that dropdown, and +only then+ clicked the crayon or whatever.
_The right spot to click_ seems to be just above the exact center of the data symbol, at least for the diamond shape symbol that I prefer. Sometimes it takes several tries to hit the right spot. If I miss it, the whole line is selected, which is indicated by the little selection dots on the line, between the data symbols. When I click the right spot, those selection dots go away, leaving only the data symbols selected. Then I can change the color, as described above.
I hope this works for you too.

How to change color in the title line?

Hi experts, How to change color in the title line, i show an image for explained better
!http://img688.imageshack.us/img688/9259/imagenjar.png!
thanks

in Views.css file
file below object.and change border-color as you desired to reflect.
.TitleTable {
     font-family: arial, helvetica, sans-serif;
     border-width: 0 0 4px 0;
     border-style: solid;
     border-color: #6666cc; ----> change here.
hope this helps !
-Niranjan K

May i know how to give rewards to the questions?

hi all gurus,
actually i don't know how to give rewards to the questions?
so, can anybody pls... let me know that...
thanks
arun

Hi Arun,
You will have Radio buttons left to the answers.
Plz select one of the radio button among the four radio buttons.
1) If you felt one of the answer solves your problem, reward them with Solved problem. Close the thread once it is solved/answered.
2) If you felt one of the answer solves helps you very much, then reward them with Very Helpful answer.
3) If you felt one of the answer helps to your problem, then reward them with Helpful answer.
Rewarding points to a contributor gives a token of recongition to him/her and makes them to contribute more on Forums. Even a single word 'Thanks' also makes them comfortable. As many contributors are spending their time apart from their regular activities. So its always a good thing to recognise/appreciate them.
Thanks,
Vinay

How can give permissions to the users in wiki?

Hi, in wiki how can give permissions to the users, i need to give one of the users full control for wiki only ( not the server ), so how can make this user wiki admin?.

No answer!!??
I Need to put one of staff as Wiki Admin then he can manage it ( Delete, Edit ...etc ), Wiki Creators users can't full admin the Wiki.
Please help.

How I find color of the pixel on the screen?, How I find color of the pixel on the screen?

How I find color of the pixel on the screen?, How I find color of the pixel on the screen?

DigitalColor Meter, in your Applications/Utilities folder.
Regards.

How do I put an external display to sleep when I am using my MacBook Air for presentation?

How do I put an external display to sleep when I am using my MacBook Air for presentation? I do not want to go to the projector just to turn it off and turn on again after a while? Is there a keyboard shortcut for that?

I want to be able to sleep the external display and at the same time do things in the MacBook.( This feature is useful for me so that I can prepare some things and so that my audience will not see what I am about to show them.)
Is there a feature for Mountain Lion?

How can I get only the music I want onto my iPhone using iTunes Match

how can I get only the music I want onto my iPhone using iTunes Match? At present it is putting a random selection on; it has none of the same control as iTunes on my Mac. And although I uploaded all my album artwork to iCloud, it is not transferring it back to my iPhone

Iphone are meant to be sync to one itunes library only.
You can copy those songs to a cd and then put a copy to your itunes media library.

How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

Hi All,
We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

Hi,
Here you go..
1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
This step you get query reference sheet or column or query general UUID for next step.
4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
Hope this helps.
Please keep in mind, it might take more time depends on how many query elements you have in the system...
Comments added for better DB performance by: Arun Thangaraj

How stop PS6 from removing the DPI value from an image when using "save for the web"?

How stop PS6 from removing the DPI-value from an image when using "save for the web"?
Example:
- Open a tif image, that contains a dpi value (resolution).
- Use the splice tool in PS6.
- Export the slices with "Save for web", as gif-files.
Then the dpi value is removed, the gif files has no dpi value (it's empty).
How can we stop PS6 from removing the dpi value when using "save for web"?
OR:
When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

How do I speed up the conversion of a PDF to Word using Adobe ExportPDF?

How do I speed up the conversion of a PDF to Word using Adobe ExportPDF?

Believe me, we ALL know what you are going through!
You CAN develop your slideshow directly in iDVD and you can have multiple songs (I just figured this out myself just now! LOL). I will walk you through the process.
Firstly, open a new project in iDVD.
Then press the + button (bottom left hand side) and add slideshow and a heading "My Slideshow" will show up on your iDVD screen. Then, go into your media and press photos, and drop your folder of photos into the "My Slideshow" button (if you havent put your folders into a new album in iPhoto, now is the time to do this).
Now double click on your My Slideshow button and all your photo's should come up. Down the bottom of this page you will see some options. Slide Duration, Transition etc. Again, go into your media and select audio. Go through your playlist and hold down the apple button (next to space bar left hand side) and select the songs you want to play with your slides then drag them across to the audio button (it automatically changes the slideshow to fit to audio). The only problem I can see with this is that there is considerable "dead" time between tracks which means some slides show without music. You can easily solve this by going into Garage Band and trim off the excess "dead" time at the end of each track. If you have problems with this I can talk you through that too if you would like.
Oh and I think i read somewhere that 99 photos is the maximum you can have in iPhoto?? That could be what is causing your problem. You could always break it down in to 2 separate slide shows?

How can we find all the available user-exits in sap without using SMOD?.

How can we find all the available user-exits in sap without using SMOD?.

Hi,
Please check this links for user exits list.
http://www.planetsap.com/Userexit_List.htm
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/ab038.htm
Regards,
Ferry Lianto

How to delete/drop all the tables from SQL Server Database without using Enterprise Manager?

How to delete/drop all the tables from SQL Server Database without using Enterprise Manager?
I tried using DROP Tables, Truncate Database, Delete and many more but it is not working. I want to delete all tables using Query Analyzer, i.e. through SQL Query.
Please help me out in this concern.
Nishith Shah

Informative thread indeed. Wish I saw it early enough. Managed to come up with the code below before I saw this thread.
declare @TTName Table
(TableSchemaTableName
varchar
(500),
[status] int
default 0);
with AvailableTables
(TableSchemaTableName)
as
(select
QUOTENAME(TABLE_SCHEMA)
+
+
QUOTENAME(TABLE_NAME)
from
INFORMATION_SCHEMA.TABLES)
insert into @TTName
(TableSchemaTableName)
select *
from AvailableTables
declare @TableSchemaTableName varchar
(500)
declare @sqlstatement nvarchar
(1000)
while 1=1
begin
set @sqlstatement
=
'DROP TABLE '
+ @TableSchemaTableName
exec
sp_executeSQL
@sqlstatement
print
'Dropped Table : '
+ @TableSchemaTableName
update @TTName
set [status]
= 1
where TableSchemaTableName
= @TableSchemaTableName
if
(select
count([Status])
from @TTName
where [Status]
= 0)
= 0
break
end

How to give color to the display of keyfigure based on condition using exception.

Similar Messages

Maybe you are looking for