How to go about multiple inclination with different data selection in Delta

We have to copy large amount of data ( more than 42lak of recodes) selectivly from on ODS to other ODS. in delata load ( BW 3.5 enverioment)
I thought of loading data in slices through delta loading with selection condition.
step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
step 2> Take the delta load .. it will take all delta record with same selection
step 3> Now I want to do Initialization with selection condition as for calyear =2002
step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
Here what problem I am facing.. while doing 2nd time initialization it prompt me to delete the last initialization request form scheduler menu.
if i delete the last request .. will it take the delta for previous initialization selection and new initialization selection. ?
Please advice how to go about multiple inclination with different data selection in delta loading.
Looking forward your reply.

Hi,
step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
step 2> Take the delta load .. it will take all delta record with same selection
step 3> Now I want to do Initialization with selection condition as for calyear =2002
step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
You are correct with this scenario normally. The message you mentioned normally comes up when you open a infopackage and don't change the selection first or in case you have overlapping selections with an already done init.
regards
Siggi

Similar Messages

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

How can I create multiple pages, with different layouts to the others, in DW fluid grid layouts?

Hi everyone, : )
I am creating a website using FGL in DW CS6, v12.0 build 5808. I do not have Creative Cloud (do you have to pay to use this service?).
I have created one layout for my home page.
I would like to create several more pages, but I want them to use different layouts (as well as different content).
I tried to do something similar before using 'save as' (this was with a non-FGL), but whenever I changed the original page that I had 'save as'd' from, the layout in all the other pages would change too!
I found a possibility from someone else online suggesting using a template, but have not tried it yet: http://www.linkedin.com/groups/Adding-second-fluid-page-in-119937.S.192422240
I'm a bit scared of breaking everything, as I am new to web design and have had to restart the whole process a few times due to messing up the fluid.css etc and other issues, so I am taking baby steps.
Happy to try whatever's suggested and, while I wait for (I hope) your responses, I think I will try the template thing, but from the reply the person who asked the question gave, it sounds like his subsequent pages changed too, as I mentioned above? *scared* ; )
If anyone can help me with this query I would be very grateful. Thank you! : )

Thanks David.
I tried using different IDs for the other pages, but eventually one of the divs seems to 'break' - it overlaps other divs, or cannot be moved or resized (you can select the outline and it goes blue, but no 'move up a row' or down a row or 'lock to grid' etc icons appear and it can't be drag-re-sized), plus the green overlay disappears (just from that div. I'm aware of how to turn visual aids on and off), so it seems broken. This often seems to happen if you rename a div once it's been created; it does not rename in the layout.css on the right side panel (CSS Styles) in DW and the 'broken' behaviour above is exhibited. Do you know anything about this? Is this the 'edit this doc at your peril' stuff that most tutorials seem to mention? Am I doing something wrong?
I also tried making an FGL and saving out the original boilerplate.css, layout.css and respond.js. Then created multiple new FGLs and each time it created new versions of layout.css (called 'untitled-1', 2 etc.). Once I had created all the FGLs, I deleted all the new boilerplates and untitled.css files. Then restored the original ones and changed the link at the top of each page's html to refer to the same filename (the original layout.css), rather than untitled.css. I thought this might work and it seemed to for a while, but then as I had to add new div names for the sections on each page, it eventually broke (as above).
Anyway, I think you have a good point about different layouts and it occurred to me also while I was exploring and waiting for replies here. I think I will make one layout for all pages and go with that. I have a couple of questions about that though:
1. I think the max number of divs I want for one of the pages is 10, but some pages need less divs. If I only fill e.g. 8 divs on one page, will the other ones be sat there empty? I think they will actually...I guess I'm asking because I have not tried it yet (will do after this) and it takes so long to do this trial and error.
2. If the amount of content in each div is different, e.g. let's say Page 1 has 6 lines of content in div1, but page 2 may have an unlimited amount of content (I will want to add to it in the future). Will this result in the div on page 1 being a huge block of empty space after its 6 lines?
Thanks so much for your help!

How do I manage multiple employees with different SW needs?

I have about 10 to 20 employees who use Adobe software, either Illustrator alone, PhotoShop alone, or the whole suite.
If I am thinking of migrating from the stand alone CS6 versions we are using today, how do I manage the subscriptions and get the right employees the software they need (and not let them upgrade without coming through IS team) and then re-assign a license when someone quits or is replaced?

How to use multiple iPhone, iPad, or iPod devices with one computer

How to locally backup multiple iPhones with different IDs

Hi all, I have a simple need to backup 2 iPhones using different Apple IDs. I understand that I can use iCloud to backup each on the cloud and no issue there. But when I ran local backup for both on the same computer, here comes the problem...
The 2 iPhones have some overlapping apps, but separately purchased on two accounts. It seems that iTunes only keeps one copy of those overlapping apps, namely only the copy using the ID of the first phone in the sequence of backup. So when I try to restore on the second phone, it will simply install those overlapping apps using the copy stored locally, which does not belong to the second ID. This seems to create a lot of confusion later on when apps are updated, since the second user will be prompted to enter the password of the first ID.
I suppose this kind of scenario is not uncommon. Is there a way iTunes can properly deal with this? Or did I not do the backup/restore correctly?

Thanks, Lyssa. I guess that probably will work, but feels like an overkill for a simple task.
By the way, I am using iTunes on PC. So the default path for media folder is C:\Users\USERNAME\Music\iTunes\iTunes Media, and the apps are stored in the Mobile Applications sub-folder under that path. I wonder whether it will work to backup the first phone as usual first, change this path in the Advanced Preferences to another user created folder, and then backup the second phone. During restore, I assume one can do the reverse and restore each phone while this path in preference is set accordingly.
That's just an idea I have come to, inspired by your solution of changing user account... haven't tried it out yet. I have to say, even that sounds like an inconvenient workaround. Is there any more elegant method I wonder...?

I have multiple devices backed up to the same computer each with different data. how do i keep them from syncing all data when i back up or transfer stuff from the computer to a device?

i have multiple devices backed up to the same computer each with different data. how do i keep them from syncing all data when i back up or transfer stuff from the computer to a device? one is an iphone 6 and the others are ipad mini first gens, each ipad has 64gb and the iphone has 128, need to keep the data seperate as they are not all mine

Itunes content and pics are NOT part of the backup that itunes performs.
Backing up, updating, and restoring iPad, iPod touch, and iPhone software
You should transfer any purchases from iphone regularly: File>Transfer Purchases , if they fail to be transferred when you sync.
You buy one and only one download. It is your responsibility to move/copy/backup your purchases.
You can try contacting itunes support and asking for an exception, but they are under no obligation to allow.
http://www.apple.com/support/itunes

I have multiple itunes libraries in my itunes folder with different dates. how did this happen?

im trying to figure out why songs randomly disappear from my actual itunes. when i check the itunes folder on the drive, there are several versions with different dates. I didnt intentionally create these multiple libraries and i dont know how to open them to look for missing music

Settings/Store worked...thanks Lawrence

How do I send docs to multiple signators with different email addresses on Echo sign ?

How do I send docs to multiple signators with different email addresses on Echo sign ?

Thanks man...the problem could be on the signators side.
Rick Schell...Realtor, ABR
www.rick-the-realtor.com
Cell 615-804-3085
Crye-Leike Realtors
Office 615-373-3513
Fax 615-373-5228
Quoting Echosign-Rob <[email protected]>:
Echosign-Rob created
the discussion
"How do I send docs to multiple signators with different email
addresses on Echo sign ?"
To view the discussion, visit:
https://forums.adobe.com/message/6395941#6395941
>

How to check-in multiple files with same name having different revision num

Hi
Can anyone please tell me, how to check-in multiple files with the same name with different revision number using RIDC API.
For eg:
First I will check-in a file(TestFile.txt) into a content server with revision number 1 using RIDC API in ADF application. Then after some time, will modify the same file(TestFile.txt) and check-in again. I tried to check-in same file multiple times, however first time its checking-in correctly into server showing revision as 1, while checking-in same file again, its not giving any errror message, and also its not reflecting in server. Only one file(TestFile.txt) is reflecting in server.
How to implement this functinality using RIDC API? Any suggestions would be helpful.
Regards
Raj
Edited by: 887680 on Mar 6, 2013 10:48 AM

Hi Srinath
Thanks for your response. Its not cloning, its like check-in file first, then check-out the file and do some editing and then again upload the same file with different revision number using RIDC. I got the solution now.
Regards
Raj

BO xi 3.1 u2013 schedule a template for multiple reports with different column

Hi,
I need to migrate the existing reports from SQL Server Reporting Services to BO, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to schedule a single template with different parameters for all reports in BO, or create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks!

Hi,
The only approach I can think of is to create a template report which uses variables
For each column you would need to variable
v_columnAName and v_columnAValue
v_columnAName would have a if statement in it
=if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
v_columnA would have a if statement in it
=if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
This would only work when you had a small set of clients.
This might be more managable if it was done in the universe
Regards
Alan

Define Multiple Taxes with different Accounts

Dear Members
I have defined tax in Oracle R12 . and defined multiple rates. these all tax deducted in a single Tax account. but my requirement is, there should be multiple taxes with different acccounts. when I define multiple taxes the system gives error unable to Calculate the tax. when I only enable one tax it works.
Current sanario tax rates
2% Account # 666461
3% Account # 666461
3.5% Account # 666461
Required Sanario
2% Account # 666461
3% Account # 666462
3.5% Account # 666463
Should be different
Do you have any Idea How I configure it.

Hmmm, thought I did that but ran into issues...Will give it a harder look.
Thank you for your reply, tt2...BTW, I've been reading these forums for awhile now and your replies in other posts have helped me so thanks for all of them, too...

Design a single template for multiple reports with different column order

Hi,
I need to migrate the existing reports from SQL Server Reporting Services to Crystal Report 2008, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks in advance.

-As I mentioned you can find Template Field object in Insert menu of crystal report Designer 2008.
As soon as you select Template Field object you will be able to see a box beside ur mouse cursor. Drag and drop this box at required place. Now when you place this object in report you will get some thing like this "<TemplateField1>" listed under Formula Fields tree. Double click "<TemplateField1>" formula to add your conditions.
-I have not tested it for large amount of Customers. However as the number of customer increases the number of conditions will get increased.
For the customer that want the same ordering of columns you can put those customers under one condition.
    for Example...
          if(?Client in ['clientA','clientA']) then
                    <TableName>.<Field>......
-What do you mean be 40 columns? Do you mean 40 fields or you want to show 40 columns in report? Please elaborate.
Regards,
Amrita
Edited by: Amrita Singh on May 21, 2009 7:54 AM

Totally confused about mixing videos with different field orders.

I have PPcs5 on the pc.
I edit for many different shooters. As such I get everything: Progressive, upper field , lower field . Not to mention from a zillion different cameras & different resolutions.
I output 95% so far to dvd ntsc, 5% BR.
I get dv tapes on some & HD files also.Many times I get a mixure of both on each job. Also Iphone HD files too. Going crazy trying to fiquer out how to set up my sequence when I have upper field or progressive by themselves & also when they are mixed with lower field dv foot...Do I force everything into a lower field seq if going to dvd?
Do I have to deinterlace anything?
If I drag a clip to the new "create seq" icon, it will match the clips properties but is that correct if its a progressive only project or an Upper field project going out to dvd ntsc?
Do I need to RT click on the clips in the project window & "interpet Footage" & force it into a lower field there 1st? Is there a difference between setting up a seq to be played on a progressive DVD player hdmi to a prog TV as apposed to setting up a seq for a non hdmi or non progressive tv?
Does outputting to dvd automatically force it to lower field ?
If my seq isnt set up correctly I notice a big interlace problem when the cams pan from side to side, especially when there are multiple cams with different field orders. Have been unable to find any good discussions or articles on the topic.
How do you guys do it without going crazzzzzzzy?Are there rules? What are the rules? A rule book would really help:-) I Yern for the old DVCAM/DV days:-)

DV is always lower and HD is upper or progressive.
As you are having all fields in one timeline i would make it progressive.
Premiere does a good job in deinterlacing.
Only use Interprete footage when the footage is interprete wrong.
Set up a progressive timeline and drop everything in it. If a clip does not behave correctly you can change fields in the Field Options.
Export from Premiere and import into Encore. That is what i would do......

Radar chart with multiple KPIs with different scales in dashboard4.0

Hi Experts,
How to create a radar chart which is having multiple KPIs with different scales. ?
Thanks in Advance
Saidulu

Hi Sai,
Customizing the chart is not possible, example the data in you criteria is like the below.
Take four row based chart to display the row based values, if the columns are having different values. Take column based chart if the difference in row based, hope you got it.
Use the label in combo box and use the dynamic visiblity to call the chart from the back.
Hope you got the idea.
--SumanT

How to go about multiple inclination with different data selection in Delta

Similar Messages

Maybe you are looking for