How to go to the next Page while generating a text file ??

All,
I am generating a text File dynamically based on the information from the Database. I need to give some Page breaks after every 80 lines. Does any one has any clue how can I do that.
I am able to generate the file though.
Also I need to set the Font to Courier.
Please let me know if anyone has done anything like this.
I am using "BufferedWriter" for generating the text file.
Thanx

Basically - I have to repeat the header if the records goes to the next Page. My records can increase decrease dynamically as the data is coming from the Database.
I do not know how to find out whether it has reached the next page or not ??
If you know by any chance how can I repeat the header once it goes to the next Page that would be a great help.
Thanx

Similar Messages

  • How can i see the next page in smartform?

    i hav created a Second Page (%page 2) in Smart form.
    and in that page i created one Main window and a table.
    in 1st page, i defined the Next page as Page2 and
    in the second page i defined the Next Page as Page2.
    but only the 1st page is displaying. how can i see the next page?
    what i want to do in smartform...

    Hi,
    The second page will be displayed only when the data does not fit in the main window of the first page and continues to the second page.
    So make sure that you have enough number of line to print that it overflows to second page.
    Ajith

  • How to dynamically give the next page in Smartform

    Hi,
    I have to give the LAST Page dynamically in Smartform. That only the last page the size of the main Window is shorter in length.
    So on Second Last page I want to dynamically give the Next Page as LAST Page.
    <b>I need to know how to give the next page dynamically in Smartform?</b>
    Regards,
    Nitin

    Hi Nitin,
    I am unable to get your requirement clearly but I can help you how to call a page dynamically.
    In the First Page, where you want to call the Last Page dynamically after displaying all the contents, right click and create a <b>COMMAND</b> node. In the General Attributes of the command selec the check box for Go to New page and select the page from the dropdrown.
    First page
       Main Window
             Table Contents
             Command
    Now, after the executing the contents of the First page when the control encounters the command node it dynamically goes to the Page you have mentioned in the command node.
    Regards,
    Tushar

  • On macy's website I can't go to the next page while shopping

    I have tried clearing history,clearing cookies and data. I don't know what else to do

    it does not help at all...
    this is what i get when i instal i can't go therder...
    i need to put my corect email this one is no longeur avaliable
    i realy need to instal please....[image: Images intégrées 1]
    2014-06-28 20:27 GMT+02:00 John T Smith <[email protected]>:
        when i load creative cloud my computer detect the wrong email ...i
    can't go to the next page to load my app  created by John T Smith
    <https://forums.adobe.com/people/JohnTSmith> in Adobe Creative Cloud
    - View the full discussion
    <https://forums.adobe.com/message/6505915#6505915>

  • Carry over formatting to the next page without adding a text box

    I've written 15 books on the old pages and had no trouble carrying the formatting to the next page without adding a page or adding a text box to the added page.  I just kept on typing.  I've added the new pages and had trouble right from the start so I went back to the old and got a good start, but going through that added procedure on every new page gets old in a hurry.
    It shows the number of pages at the bottom, but a new page doesn't come on automatically  when I type. 
    Please help.
    Thanks,
    Ron  -  [email protected]

    1. Why not continue to use Pages '09 in your Applications/iWork folder?
    2. In Pages 5:
    Setup (gear icon far right of toolbar) > check Document Body
    and the text will flow from page to page.
    Peter

  • I Need help wrapping an expandable text field to the next page, while pushing a subforum beneath it

    Hi, I hope I can get some help with this form that I am desperately trying to finish.
    I am unable to get an expandable text field to recognize both 1.) the positioned subforum underneath and 2.) the page break. I'll attach the file if it helps get an understanding of what I mean, and maybe someone can see what I did to royally screw it up. The area of the form in question is on page 4 of the attached document. I want the user to be able to write as much as they need in the summary section, and still fill out the last section afterwards.
    If more info is needed, let me know and I will do my best to describe what I did. My last solution I tried, before giving up, was to wrap the previous section, as well as the next section of the expandable text field, into its own subforum. Then, I nested the subforums together in another subforum.
    Thanks in advance.
    -Joshua
    Attachment Link:
    https://docs.google.com/open?id=0B2iKKEocs4_gTTlwZEpHTWxZVkE

    In case anyone sifting through forums, looking for the answer to this question, needs the answer: paulk07 was able to fix my document by unwrapping all of the subforms on the last page and then wrapping it in only 3 subforms (2 positioned/1 flowed) and then set the page to flow.
    From there, I set the margins so when the sectioned wrapped to a new page, it didn't end/begin at the edge of the page.
    Thanks again paulk07

  • In PI how do I convert the XML payload (input) to a text file and send out

    I am extracting data from SAP and sending thru XI / PI to a file (non-sap system).
    On the receiving end, I need the file to be a text file, with one row for each "FTZ_Row concatenated_data" tag in the input.  It needs to be just a plain text file with no XML tags.
    Currently the file gets one record which matches exactly to the XML payload below.
    I want it to create a file that looks like this :
               CONCATENATED DATA 1
               CONCATENATED DATA 2
                012345678912345678MAKTX-TEST LB 123123123123 01/02/2009 Z001WCHA9876543210.12
    here is the payload going thru XI
      <?xml version="1.0" encoding="utf-8" ?>
    - <n0:FTZ_Concatenated_Row xmlns:n0="http://intel.com/xi/INTEL_PROCUREMENT/ForeignTradeZone" xmlns:prx="urn:sap.com:proxy:FI0:/1SAI/TAS0C0412CDBC3E782D0219:700:2008/06/25">
      <FTZ_Row concatenated_data="CONCATENATED DATA 1" />
      <FTZ_Row concatenated_data="CONCATENATED DATA 2" />
      <FTZ_Row concatenated_data="012345678912345678MAKTX-TEST LB 123123123123 01/02/2009 Z001WCHA9876543210.12" />
      </n0:FTZ_Concatenated_Row>
    thanks
    jay

    thanks for the input but I am still having issues - I get an empty file when I use the content conversion option.
    My payload coming into XI is :
            <?xml version="1.0" encoding="utf-8" ?>
    - <n0:FTZ_Concatenated_Row xmlns:n0="http://intel.com/xi/INTEL_PROCUREMENT/ForeignTradeZone" xmlns:prx="urn:sap.com:proxy:FI0:/1SAI/TAS0C0412CDBC3E782D0219:700:2008/06/25">
    <FTZ_Row concatenated_data="CONCATENATED DATA 1" />
    <FTZ_Row concatenated_data="CONCATENATED DATA 2" />
    <FTZ_Row concatenated_data="012345678912345678MAKTX-TEST LB 123123123123 01/02/2009 Z001WCHA9876543210.12" />
    </n0:FTZ_Concatenated_Row>
    Here is the layout of my data type - I am using the same for input & output
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://intel.com/xi/INTEL_PROCUREMENT/ForeignTradeZone" targetNamespace="http://intel.com/xi/INTEL_PROCUREMENT/ForeignTradeZone">
       <xsd:complexType name="FTZ_Concatenated_Row">
          <xsd:sequence>
             <xsd:element name="FTZ_Row" maxOccurs="unbounded">
                <xsd:complexType>
                   <xsd:attribute name="concatenated_data" type="xsd:string" />
                </xsd:complexType>
             </xsd:element>
          </xsd:sequence>
       </xsd:complexType>
    </xsd:schema>
    I mapped these items :  FTZ_Concatenated_Row & FTZ_Row & concatenated_data
    I set up my content convesion with :
      recordset structure   FTZ_Row
    FTZ_Row.fieldSeparator     #
    FTZ_Row.endSeparator     'nl'
    I am not sure why the following row looks like this ??
        <FTZ_Row concatenated_data="CONCATENATED DATA 1" />
    I thought FTZ_Row would be one tag and "concatenated_data" would be another one.
    any help would be appreciated.
    I have read many entries/blogs/etc in SDN but and tried many different setups, but nothing is working.
    thanks

  • How do i compare the similarities between two or more text files?

    The subject says it all. I am familiar with a number of the diff tools that are available, but I have yet to find a tool or app that will find the similarities between two text files. Any suggestions?

    From http://hints.macworld.com/article.php?story=20030217061153119
    "FileMerge highlights the sections that differ in each file..."
    I need to find similarities. I was thinking something along the lines of the similarity-tester package in Ubuntu:
    http://unix.stackexchange.com/questions/1079/output-the-common-lines-similaritie s-of-two-text-files-the-opposite-of-diff/94532#94532
    Preferably a GUI tool, but command line is OK if I can figure out the proper syntax.

  • How to get data on the next page in case of templates if data is more ?

    please tell me how to get data on the next page while i m using template in my first page , if data is more howw it can be displayed on the next page ?

    HI Asim,
    template is fixed we  it can't be expand . u can better to use table line it can automaticlly expending if data is more ... u can create one more page like page 2 and create a window for entire second page ..then assign it in first page (next page page2).
    regards
    kiran kumar.

  • HT4059 The last three books I have downloaded at the bottom of the page the bottom parts of y,g,and j are appearing at the top of the next page. Any help or suggestions  will be appreciated.

    This problem just started. On the last line of each page if the letters y,g,p or j appear in the line the bottom part of each of these letters appears at the top of the next page while being chopped off the actual line it should appear in.

    *Update*
    I thought I had found the offending 'app' namely "Songpop."
    I regularly use "Songpop" on my phone late at night via my wifi connection.
    All enteries on my phonebill are at midnight (even though I have a data allowance it was excluded from allowance). I switched 3G off on Friday, played "Songpop" at midnight and at the exact time I got a "Server Error" message.
    I posted a message on the "Songpop" support forum.At first they said this was a problem relating to my ISP.
    I have spoken to my ISP and asked if there are connection drops at the time I have been billed (ie to establish if my wifi dropped and 3G kicked in without my knowledge) and have been advised that there aren't any connection drops at that time.
    "Songpop" have now responded that "This is an issue to take up with Apple Support"  see: http://support.songpop.fm/songpop/topics/playing_songpop_on_phone_via_wifi_but_i ncurring_download_data_charges_for_3g_useage?utm_content=topic_link&utm_medium=e mail&utm_source=reply_notification
    Hopefully someone at Apple can respond ....

  • I prepare chronologies in word, and i am trying to do the same in pages using tables and cells. But somtimes i need a cell to wrap onto the next page but I can't work out how to do it - any suggestions would be greatly appreciated

    I prepare chronologies in word, and I am trying to do the same in pages using tables and cells. But sometimes I need a cell to wrap onto the next page because the contents are bigger than the page or the space left on the page,  but I can't work out how to do it - any suggestions would be greatly appreciated

    brendanfromsydney wrote:
    What are the different opinions on why pages should not achieve this?
    As far as I know, Apple is free to choose to offer this or that feature.
    They never said that they want to clone Word or even compete with it.
    Differences between tables in both worlds are numerous.
    In Pages (or Numbers)
    - we can't sort a single column
    - we can't sort by row
    - we can't insert or remove a single cell
    - a cell can't cross pages boundaries
    If I understand well these design choices match :
    ++-+-+-+-+-+-+-+-++
    Apple Human Interface Guidelines:
    Apply the 80 Percent Solution
    During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
    If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
    +-+-+-+-+-+-+-+-+-++
    Yvan KOENIG (VALLAURIS, France) jeudi 9 juin 2011 16:03:52
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • How can I insert text in Pages so it flows to the next page?

    I try copying a block of text into Pages but it cuts off at the end of the page instead of flowing to the next page. How do I fix this?

    You have probably started with a Layout mode template instead of a Word Processing template. See the sidebar in the Template Chooser for which is which.
    Alternatively you may have pasted an object (possibly from the Internet), not text into a Word Processing template. Click inside the object and copy the text, then delete the object and try pasting again.
    Peter

  • How to split table in the report so it shows on the next page?

    Hi,
    How to split table in the report so it shows on the next page? Im trying to fit long (many columns) table into my report page. It is too long however. I want it to wrap and show the rest on the next page. What I get now is table cut at the page end and rest is not visible.

    Yes, this might be that the amount of data will cause table to grow and exceed 1, 2, 3.. pages. In that case I would probably want to have, lets say , one half of columns on 1st page then the other on the 2nd page and then repeatedly the same sequence down across all pages. Is there a way to achieve this?

  • How do you create a login page using dashcode for the iPhone's mobile safari that will transfer you to the next page?

         Hey I have created a login page in Dashcode for a mobile safari app (aka iphone web app) and I am having trouble since I can not find any useful info about multiple pages. I don't want to use a stack layout view because it is only a login page and I need to check with a database to make sure the user's login info is correct. Right now I have it set up so that it loads another iphone web app project once it validates the info.
         The only problem with this is I am having a good bit of trouble trying to pass values from my php code to javascript or html. For some reason calling the javascript inside the php code makes the actual code inside the app not be called and same with the echo statment for the html.
    So I would like to be able to create the app in this way:
    Login page > PHP > MS SQL > PHP > UNKNOWN (if I can't get the javascript or html to output both) > Secure info on the next page
         I believe It would be a lot easier if I had the option for a multiple page but instead I am having to load up an entirely new dashcode project. If anyone knows a better way please let me know. Or if anyone knows a link to good information on passing values from php to javascript, because I couldn't get any of the code I tried to work, I would really appreciate it.

    Addendum to previous reply:
    OK.  This is weird--but I should be used to that, and just grateful that it seems to work (for now).
    What I had done is FTPd some image files to my site using Filezilla, but when I had tried to access them, I was unsuccessful.  I am almost sure that I used the same url (and variations of it) as you suggested, namely,  http://mysite.verizon.net/username/filename , and it either did not work, or gave me the "Page under construction", or, in some cases asked me for my username and password.
    But, when I did it this time, it worked.  So I probably had something off, but I can now do what I want.
    By the way, if you'll permit another question, while on the site-builder site, it said that there was a "Web Photo Manager", and said that "To download the Web Photo Manager: Open the Site Builder application and go to the All My Sites page. Click on the Web Photo Manager link (listed under Advanced Building Tools )."  I can't find it--would you happen to know where it is?
    In any case, thanks a lot for all your help--it solved my problem. 

  • How do I stop automatic loading of the next page as I scroll to the bottom of an internet page that has a number of pages?

    When I search with Google, as I scroll to near the bottom of the page, the next page of results automatically loads. I can never get to and use the similar searches, or "Searches related to ***", which are at the bottom of the page, as the next page loads and focuses at the top of that next page. Also, there is a bar with the page number, and a field with a "Jump to" command with a pop down arrow with page numbers, and up and down arrows beside it which go up or down one page if used.
    This does not happen with, say, Bing, nor if I use Int Expl (aagh).
    I have no autopage type of add-ons, or plugins.. I may have had an add-on at one time. There are a bunch of autopager "strings", or lines, in about:config. How do you remove them, if that is the problem?
    How do I stop this from happening? It is extremely annoying.
    Thanks,
    SK

    hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Maybe you are looking for