How to gradually slow down sped-up footage back to normal playback?

I am playing back footage 250% faster than it was originally shot at, but I want it to end at 100% by the time the clip ends playing. How can I gradually drop the speed from 250% to 100% so that it does not come off as jarring to the viewer?

Mark is right, of course, but he didn't tell you what to keyframe.
Use the Time Remapping effect.
There are tutorials available for this effect. This one is for CS5.5 but it applies to newer releases as well.
http://tv.adobe.com/watch/no-stupid-questions-with-colin-smith/time-remapping/

Similar Messages

Windows 8.1 gradually slows down after hours. Speed returns normal if restart "explorer.exe".

I have Windows 8.1 Pro (x64) installed on Alienware M17x. The slowdown mostly appears as slow response in the situation such as open a folder/window, open/close/switch tabs in IE, drag window, and there's also cursor lag. It gradually
slows down after system boot, noticeable after 3-4 hours, really slow after 8-9 hours.
I have thought about many possible processes which can cause this issue, and then I found out that it's caused by "explorer.exe". If I kill "explorer.exe", the speed suddenly becomes normal. Then, I restart explorer.exe
again, it stays normal, and then it still gradually slows down again after hours.
I have checked driver or software compatibility. Also, CPU usage and Disk usage is normal.
Please give some advises, reasoning, or solutions.

SaccoSVD
The process that is causing the problem is called sidebar.exe and I am curious why it is running on a win 8 machine as I dont believe it is built in. (It seems to have over 22,000 instances launched so I suspect either malware or a broken app)
It is usually associated with a Vista machine, or updated win 7 machine. Did you do do a clean install? Have you run a malwarebytes scan?
Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.
http://www.malwarebytes.org/products
Wanikiya and Dyami--Team Zigzag

How do i slow down the scrolling in organizer?

how do i slow down the scrolling in organizer? it is so out of control that the program is unusable.

so found my old mouse with a cord and you are right, it is much better! wow. and thank you. i went on chat and they didn’t even suggest this. makes it usable. any thoughts on how to replace the right click functions?

Windows 8.1 "explorer.exe" gradually slows down - Observation

Hi, I posted a question a year ago about Windows 8.1 gradually slows down issue, and it seems still not being solved. I recently found some new clues about this, hope it can be useful. (Please read the original post first
since it contains basic descriptions of the issue:
https://social.technet.microsoft.com/Forums/en-US/f9ab40a8-6681-4c66-bdbd-9de7b2fb021f/windows-81-gradually-slows-down-after-hours-speed-returns-normal-if-restart-explorerexe?forum=w8itproperf)
This issue is found to be somehow related to total Page Faults of explorer.exe since it starts. The majority of page fault is created by desktop background slide show. On my laptop, the slide show is set to randomly switch between 53 jpegs
(mostly 1920*1080) every 10 seconds. The Page Fault Delta of explorer.exe is usually 2 per second when not doing anything, and tenth to hundreds when there are some actions. But at the instance when the background is switching, it will peak to a value
between 13,000 and 30,000.
I don't know if this value is normal or not, but when the total Page Faults reaches about 20,000,000, a slight slow-down can be observed by moving your mouse up and down on the favorite bar items in IE (the right bar shown when pressing Alt+C
in IE), a slight lag can be observed. The slow down (slightly) of normal windows can be observed when Page Faults reaches about 40,000,000. At that time, the mouse lag on favorite bar items becomes much more obvious. After another few hours, the slow-down
will become more serious.
I tried to disable the slide show by only using one background image, the total Page Fault stays low and the slow-down issue does not occur after one day (the Page Fault after one day is also far less than 20,000,000). That's why restarting explorer.exe
can temporarily fix it. I tried it on 2 other Windows 8.1 computers and get the same results. Maybe there is some memory allocation or fragmentation problem building up? One thing I don't know is that if this is caused by the background slide show itself,
or if explorer.exe in general will slow down after experimenting enough page faults.

Polyhedron,
This main reason of this issue is not the Windows system. A page fault occurs under these situation:
1. A program requests an address on a page that is not in the current set of memory resident pages.
2. The virtual memory system has become unstable because of a shortage of physical memory (RAM).
3. The virtual memory system has become unstable because of a shortage of free disk space.
4. The virtual memory area is corrupted by a program.
5. A program is attempting to access data that is being modified by another program that is running.
Please refer this blog to determine it's hard faults or soft faults.
The Basics of Page Faults
http://blogs.technet.com/b/askperf/archive/2008/06/10/the-basics-of-page-faults.aspx
In addition, from your description, since the background slide itself is without problem, I suspect the root is your ram. Try to increase the amount of memory or reduce the cache size for test.
Karen Hu
TechNet Community Support

How can I slow down my movie?

Hi,
I have created a logo using several objects. And they come one by one on my stage while playing. But these objects (which all are movie clips) coming too fast. How can I slow down them?
Thanks.

kglad wrote:
add more frames to the timeline that has your logo tween.
I have added more key frames but the speed is still fast. What is the next step to slow it down, please.
Thanks.

How can I slow down the music of my clip?

How can I slow down the music of my clip?

Try using the following code after each time you write to the TextArea. I am assuming you are using a TextArea component and are trying to control the position of where it is scrolled to when it refreshes with the chat data.
"ta" is the instance name of the TextArea
ta.verticalScrollPosition = ta.maxVerticalScrollPosition;

How do you slow down Siri's voice speed?

How do you slow down Siri's voice speed?

Hi. On my IPhone 4S, press the home button, General, Accessibility and then Speak Selection.

My MacBook pro has gradually slowed down to a halt since installing lion. The spooning rainbow is still going after an hour and it won't force quit. Anybody know what to do? Ps new to this! Thanks in advance.

My MacBook pro has gradually slowed down to a halt since installing lion. The spooning rainbow is still going after an hour and it won't force quit. Anybody know what to do? Ps new to this! Thanks in advance.

http://www.apple.com/support/macbookpro-videoissues/

I know i can slow down speed in a movie clip but can i and how do i slow down a transition clip? specifically the scrolling credits. it goes so fast i cant read it

i know i can slow down speed in a movie clip but can i and how do i slow down a transition clip? specifically the scrolling credits. it goes so fast i cant read it

never mind i found the answer

When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop and get back to normal?

When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop and get back to normal?

Hi
chorleyman wrote:
you do have to actually define the area to be bounced in the dialogue window that comes up - there are some discrepencies in the way that the program behaves like that,
Apart from the "Include Audio Tail" function, which can leave Logic bouncing for a very, very long time, there are generally, no discrepancies regarding the Bounce Locators:
If Cycle is enabled, the bounce locators will be set to the cycle locators.
If Cycle is off, and regions are selected, the bounce locators will be set to the selection.
If cycle is off, and no regions are selected, the bounce locators will be set from the Project Start to the project end.
It is smart to actually check that the bounce locators are set where you would like them to be.
wildfire31 wrote:
When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop
If you get caught with a bounce that does not stop, Command . (period) should do the trick.
CCT

How do I slow down a clip, smoothly from full-speed to full-stop, then speed up again?

I know that I can adjust the speed of a clip, but what I can't figure out how to do easily is make the clip slow down smoothly, as though time was freezing over a period of say 10-seconds, until it stops.
My way of describing this (although I know it's easier than this) is to individually clip each frame and set each frames speed at 99%,98%,97%,96% until 0%
I have read there is a way of doing this by automation, but wonder if someone can tell me how it is done?
Thanks for the help, cheers, MP.

See:
FAQ:How do I vary the speed of a clip?
Cheers
Eddie
PremiereProPedia
RSS feed)
- Over 350 frequently answered questions
- Over 300 free tutorials
- Maintained by editors like
you
Forum FAQ

How can I slow down the playback speed of selected parts of a captivate video?

Hi everybody,
I'm pretty new to Captivate and although it offers some great tools, there is something that I just can't get to work:
I'm creating a video tutorial about how to use a website i'm working with so I've tried using "Automatic" ("Demo" mode chosen) recording option which is recommended for this type of video. However, the video recorded has a different playback speed than the amount of time I recorded. This means that some of the slides have a quicker playback speed than the way I recorded, thereby not leaving enough time to show the given feature.
The recording mode with the most "true" playback was "Full motion". However, I would still like to be able to slow down selected parts of the video, but can only find guides on how to slow down the entire presentation.
Can you please advise me on how to slow down only selected parts of the project? If this is not possible in Captivate, please advise me on which video editing software (where you can slow down the playback speed on selected parts of the video) is compatible with Captivate 5?
Thanks!

Thank you. Andrew Kramer's Video Copilot video, which I somehow managed to miss, was very helpful.
I had a 79 second clip which I precomposed and enabled time remapping. But I have 12 places where I need to slow down the layer. After a while, I was runing out of room to add more keyframes using the method promoted in many videos and instruction sites (grab the last two keyframes, including the end frame, and drag).
In reality, you can add keyframes wherever you like and you can adjust them however works best within the existing timeline without messing with the duration, etc.
Much appreciated.
Paul

System gradually slowing down?

I hope I'm not picking up a topic which has been discussed a gazillion times, but I couldn't find my specific questions after doing some searches. There's a few things I won't to clear about Mac OS.
I have a MBP 2009 with 4GB mem and 500GB HD. It still runs smoothly however it defenitly runs slower than in the beginning. I guess that's a bit normal (more programs, files, mails, junk,...).
I've been a PC user most of my life and switched about a year ago. i'm happy. I always found it necessary to do a reinstall of the OS on a pc every 1-2 years (even though I try to keep my stuff very clean). I'm curious how this effects on Mac OS?
If I would do a reinstall, let's say from a Time Machine Backup (so with all my files, programs, mails, settings etc.), would the system run exactly the same or are there some core OS operations that will run 'smoother' after a re-install (with a TM backup). (I guess for a PC that would be a clean registry and not having 'unknown' processes/programs loading at the back).
Also, is having installed a lot of applications (even when they are not running) slowing down the system. I guess it shouldn't as long as there's enough disk space.
And then finally, do disks slow down after a while. Is having a 10% full HD (much) faster then 60% full (mine is around 60%). also disk defrag is no longer 'necessary' in the latest versions of Mac OS but I just can't imagine that after +1y heavy usage some files are "spread out".. (I'm no expert on file systems so I could expect an answer as: "no, EXT FS doesn't have fragmentation"
Anyways, these are a few doubts I still have around a Mac OS system slowing down:
-reinstall OS (this one particularly since i'm thinking of upgrading to new laptop, and wonder if I should start from scratch and copy manually or use my Time Machine backup to reinstall)
-having many apps (not running)
-disk fragmentations, or just hardware slowing down
cheers!
Philippe

If you have not already done so, run Disk Utility's "Verify Disk" & "Repair Permissions" steps on your HD. All utilities that do permissions repairs use exactly the same built-in function of the OS to do so, so it doesn't matter if you do this through Onyx, Disk Utility, or Disk Warrior.
The verify/repair disk step is a bit different: all utilities use the same method of detecting file system errors but (for example) Disk Warrior rebuilds file system directories from scratch (including perfectly useable ones), which often can repair damage Disk Utility can't, & has a side benefit of simplifying directory structures. Once, back when HD's were much slower & less sophisticated than they are now, this could make a large difference in file system performance. Now, it is debatable that an otherwise OK directory structure would show a noticeable improvement.
IOW, if your HD's file system is healthy or only has minor problems, Disk Warrior won't do much of anything of real value that Disk Utility can't, but it can be a lifesaver if Disk Utility can't repair certain kinds of problems it can detect.
The same is true for file fragmentation -- unless the drive is full of very fragmented files, defragmenting it probably won't show much real world improvement.
The number of inactive applications on your Mac makes almost no difference in performance. What can easily do so is the number of active processes running at any given time. As a former PC users, you may not fully appreciate the difference between quitting an app & closing all its windows. Closing all an app's windows is somewhat like old TSR (terminate & stay resident) DOS programs -- it is still using some system resources, although not as many as when it is active. So, if you aren't already doing so, remember to quit applications you do not plan on reusing for a while.
Just as importantly, don't load down the OS with a lot of unnecessary add-ons, especially ones that modify the user interface in some way. Each of these things uses some system resources; a few can destabilize the OS, causing recoverable code exceptions you may not be aware of without searching through system logs but still creating extra work for the CPU.
If or when you remove add-ons or applications, be sure to check the documentation for the proper way to do that. If you don't, you may leave behind files that impact performance.

In iMovie '11 how do I slow down my credits at the end of my movie. I typed them in, but the speed is too fast.

I have iMovie '11, and I can't find how to slow down the "credits" I've typed in at the end of my movie. I guess
it would be the scrolling speed.

Credits scroll at the speed that is necessary for the scrolling to complete by the end of the clip. So, to slow them down, simply prolong the duration of the scrolling credits title clip by selecting and draggging out the yellow boundary.
Geoff.

How do you slow down photo gallery autoplay?

I have a working Spry photo gallery and just want to slow down the autoplay by a second or two. How do I do that?
The page in question is at http://helenglazer.com/clouds/cloudsmain.html
Can't find the answer in previous posts.
Thanks,
Helen

Open gallery.js
There you will see:
var gSlideShowInterval;
if (gSlideShowInterval == undefined)
gSlideShowInterval = 3000; // msecs between images.
Change that to what ever you want.

How to gradually slow down sped-up footage back to normal playback?

Similar Messages

Maybe you are looking for