How to handle a fixed length file without newline?

Hi Experts,
I'd like to handle a fixed length file without newline by sender file adapter.
A file like following.
It contains three recores."AAXBBBXCCCCX" is one record.
AA1BBB1CCCC1AA2BBB2CCCC2AA3BBB3CCCC3
I tried that following two parameters set. But only first recored was read.
fieldFixedLengths
fieldFixedLengthType
Please tell me how to handle.
Thanks
Shinya Kawagoe.

For this case we wrote a simple Adapter Module inserting an end of line character after an offset.
This way it can be reused in many interfaces.
And reading the whole file may not be an option in case of large source files. May cause performance / memory issues.
eolbean.offset = <recordLlen>
XMLPayload xmlpayload = msg.getDocument();
byte[] content = xmlpayload.getContent();
byte crlf = 0x0A;
int current = 0;
ByteArrayOutputStream baos = new ByteArrayOutputStream();
int lines = content.length / recordLen;
do
     lines--;
     baos.write(content, current, recordLen);
     if (lines > 0) // if other lines, eol required
          baos.write(crlf);
          current += recordLen;
} while (lines > 0);
xmlpayload.setContent(baos.toByteArray());
baos.close();
Audit.addAuditLogEntry(key, AuditLogStatus.SUCCESS,     MODULE + " Done EOLing.");

Similar Messages

  • How to create a fixed length file

    Can anyone suggest a simple technique for creating fixed
    length files? CSV and delimited files are pretty simple using
    CFFILE. Is there an elegant way to create fixed length
    files?

    Simplest: Use LJustify() or RJustify() on your lines of data.
    EG:
    <cfset FileLine = RJustify (LineOfText, 128)>

  • Content conversion parameters necessary for fixed length file

    Hi,
    I new to xi.The scenario is that i have to handle a fixed length file where the records repeat after every 80 characters.Can anyone help me as to how thw identify the start of every record based on length
    thanks and regards ,
    srinadh

    Hi,
    Hey i have a small doubt.My input is like this
    99443 123213 232234 12312 127544 23423
    Here i have four recorsetnames namely HEADER1,HEADER2,HEADER3,HEADER4,HEADER5,HEADER6 all the recordsets are of same size but the lengths of the fields in it vary so i specified the following parameters
    HEADER1.fieldFixedLengths=1,3,1
    HEADER1.fieldNames=value1,value2,value3
    HEADER1.endseperator=" "
    HEADER2.fieldFixedLengths=1,3,2
    HEADER2.fieldNames=value1,value2,value3
    HEADER2.endseperator=" "
    MY OUPUT XML STRUCTURE SHOULD BE like this
    <header1>
    <value1>9<\value1>
    <value2>944<\value2>
    <value3>3<\value3>
    <\header1>
    <header2>
    <value1>1<\value1>
    <value2>232<\value2>
    <value3>13<\value3>
    <\header2>
    Is the content conversion parameters i specified enough for that. I wanted to know how would it know the begin of the next recordset(ie the seperation between the two recordsets) .Please help me its vey urgent
    Thanks in advance
    Sriandh

  • Gui_download issue - trailing spaces getting truncated for fixed length fil

    Hi All,
    I have a requirement where I need to download an internal table as a fixed length file.
    The code is as follows:
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    BIN_FILESIZE =
    FILENAME = L_FILE
    FILETYPE = 'ASC'
    APPEND = 'X'
    WRITE_FIELD_SEPARATOR = ' '
    HEADER = '00'
    TRUNC_TRAILING_BLANKS = ' '
    WRITE_LF = ' '
    COL_SELECT = ' '
    COL_SELECT_MASK = ' '
    DAT_MODE = ' '
    IMPORTING
    FILELENGTH =
    TABLES
    DATA_TAB = IT_TEXT
    EXCEPTIONS
    FILE_WRITE_ERROR = 1
    NO_BATCH = 2
    GUI_REFUSE_FILETRANSFER = 3
    INVALID_TYPE = 4
    NO_AUTHORITY = 5
    UNKNOWN_ERROR = 6
    HEADER_NOT_ALLOWED = 7
    Each row in the internal table IT_TEXT is 242 chars long.
    The FM is truncatinf the trailing blanks on the file. How do I get the FM to not truncate the trailing blanks in each row?
    My internal table has multiple rows and the number of rows on the table should be same as the number of rows on the downloaded file.
    I tried setting the WRITE_LF parameter to space.
    In this case, the trailing spaces are not truncated(which is as per my requirement), BUT all the rows in the internal table appear in a single line on the downloaded file instead of multiple rows.
    I also tried setting the TRUNC_TRAILING_BLANKS field to space but that does not work either. Spaces at the end of the row are still truncated.
    so the requirement is: the spaces at the end of each row should not be truncated and
    each row on the internal table should have a corresponding row on the downloaded file.
    (it is a fixed length file)
    I also tried using the following code
    class cl_abap_char_utilities definition load.
    DATA: BEGIN OF IT_TEXT OCCURS 0,
           TEXT(242) TYPE C,
           cr_lf TYPE c VALUE cl_abap_char_utilities=>cr_lf,
          END OF IT_TEXT.
    when i compile, i get the following error
    The type "CL_ABAP_CHAR_UTILITIES" is unknown.     
    Im using R/3 4.6C. Could this be a problem?     
    Please suggest a solution for this problem.
    Thanks!
    Sandeep
    Edited by: sandeep reddy on Jul 25, 2008 7:16 PM

    Hi,
    Try this..This worked..Add a dummy character at the end of the internal table...Then pass trunc_trailing_blanks   = ' '...
    PARAMETERS: p_file TYPE rlgrap-filename
                DEFAULT 'c:\test_download.txt'.
    DATA: BEGIN OF s_data,
            data TYPE char10,
            dummy,      " Added this.
          END OF s_data.
    DATA: t_data LIKE TABLE OF s_data.
    s_data-data = 'Test'.
    APPEND s_data TO t_data.
    s_data-data = 'Test2'.
    APPEND s_data TO t_data.
    s_data-data = 'Test3'.
    APPEND s_data TO t_data.
    s_data-data = 'Test4'.
    APPEND s_data TO t_data.
    * Download.
    DATA: v_file TYPE string.
    v_file = p_file.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename                = v_file
        trunc_trailing_blanks   = ' '
      TABLES
        data_tab                = t_data
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6
        header_not_allowed      = 7
        separator_not_allowed   = 8
        filesize_not_allowed    = 9
        header_too_long         = 10
        dp_error_create         = 11
        dp_error_send           = 12
        dp_error_write          = 13
        unknown_dp_error        = 14
        access_denied           = 15
        dp_out_of_memory        = 16
        disk_full               = 17
        dp_timeout              = 18
        file_not_found          = 19
        dataprovider_exception  = 20
        control_flush_error     = 21
        OTHERS                  = 22.
    Thanks
    Naren

  • External tables-Fixed length file

    Hi All,
    I have a fixed length file that i load daily using an External table. Recently, one of the field, IP length was changed and customer wants to send both old records with 8 byte length and new records with 11 byte length in the same data file, until complete migration takes place.
    Will it be possible for External tables to handle this requirement?. Or Is there any other possibility to treat it.
    The old file contains 104 fields with IP field position form 490 to 498. Total
    The new file contains 104 fields with the IP position from 490 to 501.
    Thanks,
    Sri.

    If the two record types are mixed in the same file, then you will have problems loading them. I can see two possible solutions, in no particular order of preference (using your example data):
    1. Redefine the external table something like:
    Position (record_type (1:1)
              version     (2:5)
              data        (6:41))then parse the remaining fields based on the version number when you select from the external table.
    2. Create two external tables over the same file, one for version 1.00 and one for version 1.01 using the LOAD WHEN clause to determine which set of data to load when you select. Something like:
    CREATE TABLE version1 ...
    ORGANIZATION EXTERNAL ...
    ACCESS PARAMETERS
    (RECORDS DELIMITED BY newline
      LOAD WHEN (version = 1.00)
    < definition for the old format >
    and
    CREATE TABLE version101 ...
    ORGANIZATION EXTERNAL ...
    ACCESS PARAMETERS
    (RECORDS DELIMITED BY newline
      LOAD WHEN (version = 1.01)
    < definition for the new format >Then yor processing would use something like:
    SELECT ip, last_name
    FROM version1
    UNION ALL
    SELECT ip, last_name
    FROM version101HTH
    John

  • Upload a Fixed Length file in terms of Bytes..

    Hi,
    Here is my query.
    I have a fixed length file that I need to upload into my program from my presentation server.
    The file is in a Shift-JIS Format.
    The file is a fixed length format. But it is fixed interms of the number of bytes that each column occupies.
    Eg. The 1st column takes 8 bytes, the second 15 bytes, so on and so forth. We do not know the no. of characters each column takes... just the numbe of bytes.
    This is how I had approached the upload.
    I created an internal table with just one field of type XSTRING.
    I used GUI_UPLOAD FM with CODEPAGE = `8000`.
    But i noticed during debugging that in each record, the moment a SPACE occured in the input file, it would stop reading and go to the next record in the file. Meaning, I loose all the data after the first occurance of SPACE.
    Am I missing something here?? Why does the FM truncate after the first SPACE. ??
    Do I need to declare the internal table in any other format..??

    " May be placing a carriage return end of each records
    " will solve your problem
    class cl_abap_char_utilities definition load.
    data : begin of itab,
            field1(1) type c,
            field2(2) type c,
            field3(3) type c,
            field4(4) type c,
    crlf(2) type c value cl_abap_char_utilities=>cr_lf. "<<<See this line<<<
    data : end of itab.
    Data : begin of itab1 occurs 0.
            Field(20) type c.
    Data : end of itab1.
    Loop at itab.
         Move itab to itab1.
         Append itab1.
    Endloop.
    Open dataset  ........
    Loop at itab1.
       Transfer itab1 TO dataset.
    Endloop.

  • Creating a Fixed Length File

    Greetings,
    I'm creating an application that need to create a fixed length file on a UNIX system and need help. I have an internal table(s) which contain structures with fields of different lengths (type c) and so I have a routine that concatenates these fields into a single record to be sent to a file using the open dataset. This process is squeezing out all my spaces and so my fixed length file is lost. Can someone assist in creating a fixed length file from an internal table without using delimiters?
    Thanks!

    " May be placing a carriage return end of each records
    " will solve your problem
    class cl_abap_char_utilities definition load.
    data : begin of itab,
            field1(1) type c,
            field2(2) type c,
            field3(3) type c,
            field4(4) type c,
    crlf(2) type c value cl_abap_char_utilities=>cr_lf. "<<<See this line<<<
    data : end of itab.
    Data : begin of itab1 occurs 0.
            Field(20) type c.
    Data : end of itab1.
    Loop at itab.
         Move itab to itab1.
         Append itab1.
    Endloop.
    Open dataset  ........
    Loop at itab1.
       Transfer itab1 TO dataset.
    Endloop.

  • Reading a fixed length file

    Hi All,
    I am trying to read a fixed length file with .DAT extension through an FTP Adapter. I am using a read(polling) operation.
    In the file there are three records(H,D,T). The length of all the three records is more than 100.When I am trying to build a schema for that file using native format builder, maximum position that i get is 100 and if i manually try to put the position beyond 100 say 120,while building the schema and then run the composite using the generated schema, the file is not polled from the location So if anyone could help me to clarify my doubts regarding reading of fixed length files.
    a. Can i read i fixed length file which contains records whose position is more than 100.
    b. If yes, then how do i do that?
    Any help is appreciated.
    Thanks in Advance.

    Here's one way to start. Extend this class for the particular functionality you want:import java.io.DataInputStream;
    import java.io.File;
    import java.io.FileInputStream;
    import java.io.IOException;
    /** Processes binary files which have embedded data records. */
    public abstract class BinaryInputFile extends File
    * Class constructor.
    * @param fileName The input file name.
    * @throws NullPointerException if the <code>pathname</code> parameter is <code>null</code>
    protected BinaryInputFile(String fileName) throws NullPointerException
       super(fileName);
    * Reads the file, one line at a time, passing each line to the subclass� process()
    * function.
    * @throws IOException if an error occurs.
    public void process() throws IOException
       DataInputStream stream = new DataInputStream(new FileInputStream(this));
       process(stream);
    * Process the file data.
    * @param stream The input stream.
    protected abstract void process(DataInputStream stream);
    }

  • Reading fixed length file with different record types

    Hi,
    I need to read a fixed-length file with different record types, but the record identifier is in 31st position and not in 1st position.
    But if I give 31 as position in File adpater wizard, BPEL takes whole 1-31 as identifier.
    How we need to read such files.
    Thanks
    Ravdeep

    hi ,
    u cannot use the default wzard for this
    use some thing like this nxsd:lookAhead="30" nxsd:lookFor="S"have a look at the below link it has some examples
    http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/nfb.htm

  • MFL Exception while parsing fixed length file

    Hello Folks,
    I am getting a MFLException when I run a fixed length file through a MFL Format tester.
    <MFLException>
    <ErrorMessage>Did not completely process all input data.</ErrorMessage>
    <Details>
    <Detail>
    <Name>ErrorCode</Name>
    <Value>-3</Value>
    </Detail>
    <Detail>
    <Name>DataOffset</Name>
    <Value>2720</Value>
    </Detail>
    </Details>
    </MFLException>
    Added a Filler to handle any new line characters at the EOF.
    Any ideas what's wrong with my MFL ?
    Cheers,
    Abhijeet

    Hi Atheek,
    Thanks for the response. I sent an email to you gmail id with MFL & sample message being used.
    Cheers,
    Abhijeet

  • Fixed length file sending to user.

    My output filxed length file contains records of length 750 chars.
      My problem is I need to emailed such file to user...so the user can download the file & if error is there then, user can  correct the values in this file and then rerun the program with this corrected fixed length file.
    I can send this fixed lenth file as an attachment also.
    How can I send, this fixed length file  to the user mail id ?
    Could you please help me with the code?
    THANKS IN ADV.

    it is possible in case of binary files not text files just read Thomas comments in the Blog.
    Sending E-Mail from ABAP - Version 610 and Higher - BCS Interface

  • Fixed length file to xml file

    Hi,
    Fixed length file to xml files.
    i have to generate 2 xml files based on a field in the incoming file. structures of both xml files are same.
    I want to know how many target data type ,target msg interfaces have to be created?
    Thanks.

    Ok got you. Best thing would be to use  a simple OS command copy in your receiver communication channel. So do one mapping and generate one file and then use the OS command in receiver comm. channel after message processing then it should work for you.
    Regards,
    ---Satish

  • XSLT Mapping : XML to Fixed Length File

    Hi,
    I have to code a XSLT mapping which converts the XML into a Fixed Length File Format. I am getting the output but it has some garbage values (Some extra spaces in front of first record and also extra blank lines before the first record)
    I am pasting my xsl sheet :
    <?xml version="1.0"?>
    <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
         <xsl:output method="text" indent="yes" media-type="text/plain"/>
         <xsl:template match="Employees">
              <xsl:for-each select="Employee">
                   <xsl:value-of select="Name"/>
                   <xsl:value-of select="ID"/>
                   <xsl:value-of select="ADD"/>
                   <xsl:text>&#xA;</xsl:text>
              </xsl:for-each>
         </xsl:template>
    My input XML file is as follows:
    <?xml version="1.0"?>
    <p1:Test02 xmlns:p1="http://www.infosys.com/xi/training/hyd/66289">
            <Employees>
              <Employee>
                 <Name>Anurag</Name>
                 <ID>1121</ID>
                 <ADD>Hyderabad</ADD>
             </Employee>
             <Employee>
                 <Name>Divya</Name>
                 <ID>1122</ID>
                 <ADD>Hyderabad</ADD>
             </Employee>
             <Employee>
                 <Name>Rasmi</Name>
                 <ID>1123</ID>
                 <ADD>Bangalore</ADD>
                </Employee>
         </Employees>
    </p1:Test02>
    And the output i am receiving is as follows:
        Anurag1121Hyderabad
    Divya1122Hyderabad
    Rasmi1123Bangalore
    Please do help.....

    hi,
    >>>>
    <xsl:output method="text" indent="yes" media-type="text/plain"/>
    you allow the spaces by using indent="yes"
    try with indent="no"
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • How to handle errors in a file at sender side?

    Hi
    I have done a file to proxy scenario.
    I know how to handle errors on proxy.
    But on sender side when picking the file if one the record have worng fomat its throwing mapping error and its not processing any record..
    I wanted to process the records which have right format and data and  all remaining recrods which have wromg format should be send back to the sender as file.
    How to do this.
    How to handle error in sender file.
    Regards
    Sowmya

    Hello Sowmya,
    In your scenario Three ways you can validate the data.
    1) Before the data reaches into SAP system ie in XI system during Mapping or before mapping i,e in Adapter Module in the Sender side
    2) this option, is in the receiver applications side. ie. Validations will be taken care in the SAP system i.e in ABAP server proxy code.
    3)Through BPM, If Mapping Exception Occures then through exception Branch you can send bad formate file to sender again.
    Generally, it is prefer to more business critical validations in the Application System ie Receiver Application System (ABAP Server Proxy)
    In this, you can have more flexibility of the validations as you are validating some of the SAP payroll informations as Personal ID etc.
    Based on the complexity and flexibility of the requirement, you can either do this in the XI (if XI, ie Sender Adapter Module or Mapping) or in the ABAP proxy
    Thanks'
    Sunil Singh

  • Please help with reading fixed-length file

    I am reading a fixed-length file from a batch program and I need to read through each line, parsing out records in each, and replacing the first character in each line after I finish processing. I am using a RandomAccessFile, but I am not sure if this is best for my needs.
    Here is essentially the code that I am using:
    RandomAccessFile raf = new RandomAccessFile(File, "rw");
    int pointer = 0;
    int recordLength = 65;
    int counter = 0;
    string test = "X";
    pointer = raf.getFilePointer();
    while ((line = raf.readLine()) != null) {
    //set file pointer
    seek(counter * recordLength);
    counter ++;
    if (line.substring(0, 1).equals(test)) {
    continue;
    var1 = line.substring(7, 22);
    var2 = line.substring(23, 41);
    var3 = line.substring(42, 52);
    var4 = line.substring(53, 53);
    //PROCESSING
    raf.writeChar(test);

    Thanks for the suggestion. I think that the
    BufferedReader is the way that I will go. Do you
    happen to know the best way to update the 1st Char of
    each line as I'm reading each line using Buffered
    Writer?Hi,
    To update the first char of each line, you could read each line of the file into a StringBuffer, modify the value, and then write the value back out to the file.
    I had to do something similar.
    eg.
    StringBuffer buf = new StringBuffer();
    BufferedReader in = new BufferedReader(
        // data file source
    new FileReader(db_location));
    String s;
    // while there are still items to read
    while ((s = in.readLine()) != null)
        System.out.println("reading file");
        // split into component parts so we can modify
        StringTokenizer t = new StringTokenizer(s,",");
        int id = Integer.parseInt(t.nextToken());
        String code = t.nextToken();
        int quantity = Integer.parseInt(t.nextToken());
        // copy component parts into StringBuffer
        buf.append(id+",");
        buf.append(code+",");
        buf.append("\n");
         // use StringBuffer methods here to isolate first character
         // use StringBuffer methods to replace first value of input in buffer
         // eg.
              buf.replace(index,length,","+ new_code);
    // print out the StringBuffer to rewrite updated file
    PrintWriter output = new PrintWriter(
        new BufferedWriter(
        new FileWriter(db_location, false)));
    output.println(buf.toString());
    output.close();As always, there is more than one way to skin a cat. But this is my way.
    I think that JDK 1.4 has some new methods, but not 100% sure of that.
    //Daniel.

Maybe you are looking for

  • Invoice error Message

    Hi All Scenario When the invoice is coming from third party systems  for a particular purchase orders & for a specific Line items we are getting errors in the third party system as "Invoice exceeds the tolerance levels enforced by the client .so invo

  • No data to display on ADF mobile application

    Hello all, I have followed and tested Sherman's tutorial: http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/adfmobile/ShermanNewFeatiure-ADFMobileBrowser.html This is a great tutorial, simple and straightforward, so I easily put to work,

  • Monitor displaying at 150%

    Not sure where to post this, but monitors seems like the right spot. I have a Samsung LCD monitor connected to my powermac G4. I was trying to adjust the view setting on a game I was playing and it reset the whole monitor settings. Don't recall just

  • Hi, i'm using 10.6.8 and cant open pdf using safari  Ive tried deleting the adobe plugin in the library option..

    hi, i'm using 10.6.8 and cant open pdf using safari on "my vodafone" web site. when i click on the pdf icon nothing happens?? Ive tried deleting the adobe plugin in the library option...but no luck...driving me crazy! cause it opens in my 8yr old des

  • ITunes Library on NAS - issue with saving the library file

    I recently moved my library file and all iTunes data to a NAS. Generally, this setup seems to work (although writing files and editing information is fairly slow). However, when iTunes is open for longer periods, I often get the error message "The iT