How to handle empty field in idoc to file scenario
some field of IDoc is empty, there occurs error. like
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:vendor_list/vendor[3]/company_code. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at
Hi Shen,
You can do this in two ways :
1.If you are above XI3.0 SP14 then you can use the node function "mapWithDefault" in between the mapping. This will create the xml tag for the field on the target side even if you are not having those fields in the source side i.e., idoc.
2.At first check your field exists or not at runtime & based on that If exists then you map it to the target field else if you dont have then if the field is alphanumeric then map the same length spaces as constant in the target or if the target field is numeric then map with a constant having that many no. of zeros.
Ex:
If>Idocfield>Exists>then>Idocfield
>else>constant(may be with spaces or zeros)
Regards,
Vinod.
Similar Messages
-
ABOUT DATA SENDING IN idoc TO file SCENARIO
How the data is sended in idoc to file scenario?
what is the difference in sending data through BD10, BD14 and WE19 ?
Is the data is sended through XI OR R/3 SYSTEM?Hi Rammohan
>> How the data is sended in idoc to file scenario?
Makeing settings in SAP R/3 side then based on the RFC
destination,port,parterner profiles.....
Idoc can hold the data with out any direction but RFC port will direct where to
go ...based on the partner profiles (Out buond IDOCS)
>>what is the difference in sending data through BD10, BD14 and WE19 ?
BD10,BD11,BD12,BD13,BD14 will be to send the master data automatically
generally will be in the production(But not for testing) and this will be depending
on the declaration of profiles in the BD64
--- But we19 will be used to test the Idocs with any data
but here we need to give all the parameters like senders,receivers,ls,idoc...
>> Is the data is sended through XI OR R/3 SYSTEM?
Data will send through XI i.e XI will receive the Idoc and Convert into XI specific
SOAP XML message and process all the pipe line steps ...based on the target
it will send
Here target is file so choose the file adapter as target and give all parameters
it will work fine
I hope this will answer your question
regards
--- prasad -
How to Handle Blank Field Value based Condition in SmartForms
Dear Sir,
In SMARTFORM , we need to define a Condition that incase Field Value is not equal to BLANK value (blank means that field is empty) then a specific text gets printed .
Our problem is that We do not know as how to define Empty Field Value based condition .
Had it been Non Empty Field value based condition then solution was simple and could be done in following way :
Field Value R Comparision Value
WA_KZDKZ = 'X'
In our case , we need to give Blank (Empty Value) instead of 'X' .
Kindly help us pl .
Rgds
B MittalHi,
To handle blank field values in SMARTFORMS,
Go to the conditions tab in your SMARTFORM and give condition there
Field Comparision operator value
<Field name> <> Here symbol is diff space.
eg:
wa_mara-matnr =/ space.
Regards,
Santosh Kumar M. -
How to handle empty file using sftp adapter
Hi,
Please explain me how to handle empty files in sftp adapter.
Thanks,
EnivassHi Enivaas,
I don't have the seeburger sftp adapter at hand at the moment, but asfar as I remember, this does not specifically have an empty-file handling option like the standard ftp adapter.
So to stop emtyp files from being written, guess would need to handle this at the mapping level. For example, check for target creation criteria in the header node in mapping. If the creation criteria is not met, you can throw an error in mapping.
You may also incorporate this condition in your Receiver determination. In this case, if the condition is not satisfied, no receiver is determined in PI.
Regards -
Hi Experts,
I am doing File to File Scenario.
If my Sender systems file is Empty , that means there is no Records in the File .
How to Handle Empty Files ??????????
I want to know For both Sender and As wel as Receiver Adapters
Please Let me know..
Regards
KhannaSee if u are having a sender file adapter and the file is empty u can tell the if it has to 'Process the empty file' or 'Skip the empty file processing'.
Similarly if you have a message to going to your Receiver file adapter and the message is empty then you can decide still if you want to create a 'File with empty records' or skip creating the same.
Regards, -
How to handle currency fields in BDC
Hi All,
Please tell me how to handle currency fields in BDC.... If possible give me some sample code...
Thanks in advance,
points will be given,
praveena.Declared it at the Global definitions.
in global data tab and currency/quant fields.
Initialize some value there itself.
Just before the text node create one program lines node,
and that,In the import and export parameters of it give total_amount.
refer to the following link:
http://sap-img.com/abap/figure-to-words-for-india-but-can-be-modified-to-any-requirement.htm
Currency Fields
Reward if useful. -
Please tell me how to transferred the fields to IDOC.
HI all,
I have appended some new fields into the ztable structure (Ex: ZUNIT). These same fields will be transferred into the IDOC.
Can any body, please tell me how to transferred the fields to IDOC.
Thanks & Regards,HI,
See the following link.
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/mysap4/mysap4149.htm -
How to eliminate empty tags in out put XML file in IDOC to File scenario
Hi Experts,
I am doing IDOC to File scenario.
My Out put XML is in to FTP is as below
<ITEMS>
<item>
<A>asdf<A>
<B>GHIJ<B>
</item>
<item>
<A>123<A>
<B>G098<B>
</item>
</ITEMS>
<ITEMS/> -
> Means no data
<ITEMS/> -
> Means no data
<ITEMS>
<item>
<A>yyy<A>
<B>zzz<B>
</item>
<item>
<A>arrr<A>
<B>Ghhh<B>
</item>
</ITEMS>
Now I want to eliminate tages <ITEMS/> in out out put XML file ( PIwhich writes in File server).
1) Is there any setting in communication channel to do this
2) Is there any settings in Mapping proram to suppress parent tag if child tags are not available.
I want output as below .
<ITEMS>
<item>
<A>asdf<A>
<B>GHIJ<B>
</item>
<item>
<A>123<A>
<B>G098<B>
</item>
</ITEMS>
<ITEMS>
<item>
<A>yyy<A>
<B>zzz<B>
</item>
<item>
<A>arrr<A>
<B>Ghhh<B>
</item>
</ITEMS>
Thanks,
Subbuitems->mapwithdefalut(just empty in the value)-> euqals(check with empty constant)->not->createif->target node
and make sure that as Ravi kanth said ...occurance is min is 0 at target side
Regards,
Prasad.
Edited by: PRASAD KONDA on May 21, 2009 1:50 PM -
How to suppress the Acknowledgement Error in IDOC to File scenario?
Hi -
I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
i tried that option but i still get the 'Acknowledgement not possible' error.
Is there any other way to suppress this error?
Thanks,
TirumalHi Tirumal,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
abhy -
Idoc-xi-file scenario. how to display file in html format
I am not sure whether this is a valid question.........but want to confirm as it was asked by somebody
In idoc-xi-file scenario....... how to display file in html format ??
Thanks in advance
KumarHi Vijayakumar,
Thanks for your reply !! You mean to say I got to use XSLT mapping and also .htm and .html extension together to produce the html file ?? or it is sufficient to use any one of them to produce the html file ??
Regards
Kumar -
Context handling in message mapping for an IDoc to File Scenario
Hi,
Can somebody help me with this issue. I have an Idoc to file scenario. heres my idoc structure. Its a custom Idoc
Header (1..1)
Detail (0..Unbounded)
DependentDetail (0...Unbounded) Note: This dependentdetail is a subelement of Detail
Trailer(1...1)
I created my target structrure the same way as the Idoc structure.
My output is a simple text file. I need the output in this format
Header
Detail1
Dependentdetail1
DependentDetail2
DependentDetail3
Detail2
DependentDetail1
Dependentdetail2
Detail3
Detail4
Trailer
Since the Detail and Dependent Detail records are unbounded .
But right now i m getting my output like this:
Header
Detail1
Detail2
Detail3
Detail4
Trailer
But the DependentDetail record in not showing up in the output file. I didnot do any context change in my mapping. So do I need to do any context handling??...If so can somebody explain me with this.
Thanks,
Adam
Edited by: hymanroth on Apr 29, 2011 11:11 PMThanks Kenneth foryour quick reply,
Yes, I see the payload for Dependent detail in SXMB_MONI. So as you said earlier there's a problem with my content conversion.
my content conversion is as follows:
Header.fieldNames
Header.fieldFixedLengths
Header.endSeparator
Detail.fieldNames
Detail.fieldFixedLengths
Detail.endSeparator
DependentDetail.fieldNames
DependentDetail.fieldFixedLengths
DependentDetail.endSeparator
Trailer.fieldNames
Trailer.fieldFixedLengths
Trailer.endSeparator
So As I told earlier. With the above content conversion. I am not able to get the Dependent detail record in my output file. So If there is a change in my content conversion can u check it and tell me where I went wrong.
Thanks,
Harsh
Edited by: hymanroth on May 2, 2011 7:03 PM -
How count number of item records in a File: Idoc to File scenario
Hi All,
I am configuring an IDOC to File scenario.
Once all the IDOC data is dumped on a File, I need to calculate the number of Item records in this file and write this number at the end of the trailer record in the file.
Is theer a way to calculate the item data records(or say number of lines in the file) in the message mapping area. Or any other simple way to do it.
Appreciate your help on same.
Thanks
Shirinhi,
Use the count function for ITEM node the assign this count value to the receiver field , keep the ITEM context to header!
Thanks,
Vijaya. -
How To Test Idoc To File Scenario in ID From Tools- Test Configuration
Hi All,
Can any body help me in step by step process including screenshots for testing Idoc to file scenario in integration directory from tools->test configuration.
My scenario is passing the PO Idoc data from R/3 into a file using XI.
i have processed the idoc from R/3 and now i went to sxmb_moni in XI system and took the payload xml data.
In ID I have navigated to test configuration from tools then i have provided the following information.
Sender Service : Business system of R/3 b'coz here R/3 is the sender.
Sender Interface : ORDERS.ORDERS6
Receiver Service : Business system of XI b'coz here XI receives the data and places it into a file
In payload text box i have copied the xml code which i have taken from sxmb_moni and clicked the run button. then i got the following error:
Sender Agreement
Internal Error
HTTP connection to ABAP Runtime failed.
Error: 403 Forbidden
URL: http://bxdci.boewe.custservice.de:8093/sap/xi/simulation?sap-client=100
User: PIDIRUSER
Kindly look into it and correct me if iam wrong or is there any other way to test this scenario in ID please suggest.
Thanks & Regards,
VenkatHi Venkat,
Specify the test confisuration as follows.
<b>Sender</b>
Service : Business System of SAP R/3 System
Interface : The outbound message interface name of type the IDOC.
Namespace : will automatically loaded when u select the Interface. Check if it the correct namespace.
<b>Receiver:</b>
Service : Business System name for the Fle system.
Paste the payload that u copied from the sxmb_moni.
Now click on Run and test ur Scenario.
Was the scenario sucessfull in the Message Monitor.
Regards
Santhosh -
Alerts when the acknowledgement fails in IDOC to File Scenario
Hi All,
could you let me know how to handle Alerts for Idoc to File scenario.
My Scenario uses BPM as well.
Thanks,
SriniDear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks. -
Error in Operation Mapping for Idoc to File Scenario
Hi Experts,
I am doing Idoc to File Scenario for Timesheet IDoc "HRSM_C" and following step are through,
Sender agreement --> Receiver Determination --> Interface Determination
got stuck in Operation mapping, it sahows error
"Unable to find resource 193c0e01-bd37-11dd-850c-d879ac131b1f in the following software component versions: http://clarityPOCcom/sap/xi/tf/_MM_Timesheets_iDocToFile_.class-1"
Also not all the fields of IDoc HRSM_C are transferred to the XI server as I am unable to see all the fields in xml file using transaction idx5, as I suppose the reason behind may be there are no values in those fields.
Please suggest how to resove the issue and transfer all the fields from R3 to XI in Idoc eventhough it doesn't contain any value.Hi
Refresh CPA cache using user PIDIRUSER.
Look Note 951318 for Mapping Cache Refresh.
Maybe you are looking for
-
Tuning a procedure and using dbms_job.submit proc that call's functions
Hi I have Procedure that have 3 curosrs which are nested one below with in each other and it looks as below it's structure will look some thing look like this declare empno_fetch number; CURSOR deu_process IS SELECT empno FROM emp WHERE flg_process =
-
Hi, We are trying to implement the legal VAT change for Italy. My customer wants to choose self billing as against tax integration. I found note 1454009 which deals with the same. I also found an user manual attached to the note. When I looked in the
-
Tracking/Character Problem after 10.6.2
I've seen some other posts that describe the same problem, but can't seem to get any of the provided solutions to work. Since going to 10.6.2, all my text has gone funky-- either the kerning is wrong, or there's odd characters, or (most commonly) the
-
Captivate 6 not reporting quiz correctly to LMS
I am using Captivate 6 and SumTotal as the LMS. When I complete a quiz with 10% or less it doesn't show the results in the LMS. Scores above 10% are recorded correctly. I really can't fathem what the problem may be. I have not seen this problem with
-
Is the Note 3 compatible with the new Verizon XLTE network coming?
I read that Verizon will be unveiling their new XLTE network on May 19th? The new service is supposed to provide better service in 50 new markets. Will the Note 3 work on the new network? What are the 50 new markets?