How to handle OUTLOOK addin InactiveList in APPV 5.0

I Tried to sequence an OUTLOOK addin using APP V 5.0 Sequencer.
While sequencing, I launch the OUTLOOK shortcut, I was able to see the ADDIN in ACTIVE LIST.
But when I install the addin and launch shortcut, the ADDIN is comming in INACTIVE LIST.
I have checked LOAD BEHAVIOUR value is '3'
But still the addin is comming under INACTIVE list.
Please let me know any one faced the same issue earlier and do we have any solution to appear in ACTIVE LIST.?

Hello,
I'd start from checking the Trust Center settings first. Is macro security applied to add-ins as well?
Is your add-in listed in the Disabled Items list?
Microsoft Office applications can disable add-ins that behave unexpectedly. If an application does not load your add-in, the application might have hard disabled or soft disabled your add-in.
Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer if you stop the debugger while the Startup event
handler in your add-in is executing.
Soft disabling can occur when an add-in produces an error that does not cause the application to unexpectedly close. For example, an application might soft disable an add-in if it throws an unhandled exception while the Startup event
handler is executing.
When you re-enable a soft-disabled add-in, the application immediately attempts to load the add-in. If the problem that initially caused the application to soft disable the add-in has not been fixed, the application will soft disable the add-in
again.
You can read more about that in the
How to: Re-enable an Add-in That Has Been Disabled article in MSDN.

Similar Messages

How to resolve the IP Address in Outlook addin?

Currently, I am using an outlook addin, which receives the mail and parses the body of the mail,and doing some database operations.
The thing is that, using the CC email address, it assigns the task through database. But, if user uses Display Name of the CC address in their mail, Outlook addin fails to fetch the address corresponding to the CC address. How to get the CC address (Resolve
mail address) of the Display Name used in the remote machine where the Outlook Addin is running.

You need to use the
Recipients property of the MailItem class which returns a corresponding collection which
represents all the recipients for the Outlook item. The Recipient class provides all the required properties and methods.
The
Type property indicates whether a recipients belong to the CC field (TO or BCC).
The
Address property returns a string representing the e-mail address of the Recipient.
The
Name property returns a string value that represents the display name for the object.

How to handle Pre-requistes in AppV?

Hi All,
How to handle Pre-requisites in Application Virtualization?
I know that we need to install all the pre-requisites in Sequencer Machine before starting sequencer & then the same pre-requisites should be available in Client. I know that we can use AppV Connection Groups to handle pre-requisites.
When to use AppV Connection Groups & when to use normal installation of pre-requisites in sequencer & Client Machines?
I want to document this in Standards Document & I want to know what should I mention Under How to handle Dependencies?
Whether the dependencies are of Thick Install Or Virtual Applications
Thanks in advance..

That's really up to you, what's your expectation, what's your customers expectation.
Personally, if I have an application with a pre-requisite that I know only applies to that application e.g. A runtime with the name of my application in it, I will include that in the one package with my app. If I have a pre-requisite which is likely to
be required by multiple applications, I try to determine how many and what apps before decided what to do with it.
If I have an app which requires, say the latest version of Java and I know that I'm putting that app locally as part of my build. I will keep that Java local too. But that's just my preference...
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

Detecting the send event in Outlook addin

I'm trying to write an Outlook AddIn app in C# using Visual Studio 2012. I need to detect when the send button is clicked in a current email. I'll want to perform some actions after the send button has been clicked.
I assume an event handler needs to be created, but I'm not sure where- at the item level, or application level. I created a mail item object with Outlook.MailItem publicItem = (Outlook.MailItem).this.OutlookItem. It seems like I should be detecting
publicItem.send but I'm not clear on how and where to use event handlers in this case.
I added a checkbox, and Visual Studio created publicCheckBox_Changed(object sender, EventArgs e) for me. To check if the box was checked, I used 'if(publicCheckBox.checked) { do stuff }. Is detecting the send event similar?
I'm new to c# and Outlook Addins, and fairly new to coding.
Thanks for your help.
Wayne

Hello Wayne,
In the check box Clicked event you can add a user property to the MailItem (see UserProperties.Add). Then in the ItemSend event ( see the Application class) handler you can check out the property value - whether it is set or not. Be aware, the Cancel parameter
passed to ItemSend event handler allows to prevent the item from sending.

Error in TB-OUTLOOK-ADDIN 4611 subUpdateSender 4...

This has been going on for months and I've written to the mail in support over and over again and can't seem to get ANY help regarding this...
Also, when the error happens I get a pop-up asking if I want to send in an email to Skype support but it bounces back EVERY time. I've written in about 25 times (seriously, no exaggeration) telling them that the emails are bouncing back (anything sent to : [email protected]) is bouncing back. I keep telling them if they can get that error in the hands of the people who manage the email accounts it’s a SUPER EASY fix... but 3 months and over 25 emails and nobody there is listening...which means they are likely not getting any of these errors from other people with the same issue... it is so very sad how poor the support for this product is!!
Anyway, on to the real reason I'm writing here hoping to get some support. The toolbar for Outlook keeps crashing Outlook for me. Sometimes it crashes the whole thing, and often it just stops working (and then I can't access my email folder and then have to restart Outlook anyway).
This is the error message that I've been trying to get to Skype support:
Diagnostic information for administrators:
Generating server: domain.local
[email protected]
CH1EHSMHS016.bigfish.com #550 5.4.1 [email protected]: Recipient address rejected: Access Denied ##
Original message headers:
Received: from MBX215.domain.local ([169.254.13.167]) by HUB205.domain.local
([192.168.68.49]) with mapi id 14.02.0318.004; Wed, 27 Feb 2013 18:55:46
-0500
From: Craig W Janelli <[email protected]>
To: "[email protected]" <[email protected]>
Subject: Error in TB-OUTLOOK-ADDIN 4611 subUpdateSender 4130
Thread-Topic: Error in TB-OUTLOOK-ADDIN 4611 subUpdateSender 4130
Thread-Index: Ac4VRfUD8/I1dACXQ0KKXsxzbEdnIg==
Date: Wed, 27 Feb 2013 23:55:46 +0000
Message-ID: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [192.168.64.27]
Content-Type: multipart/alternative;
boundary="_000_CAF6883420F6764FAD1602AF68B9BDA557EBD52EMBX215domainloc_"
MIME-Version: 1.0
I'm using Outlook 2010 on a Windows 8 machine. I'm using the desktop (not the Metro/App version).
Is there anyone here that can help me??
Also, does anyone have a suggestion on how to actually get a hold of someone that could address the issue with their address [email protected] not working (seriously, that's about the easiest fix in the world once it gets to the right people... I just don't know how to get this to them...

Please try any of these methods.
Method 1
Reinstall Skype Email Toolbar.
http://www.skype.com/go/getextra-outlooktoolbar
Method 2
Try to un-register Skype toolbars library files.
Press Winkey + X >> Select Command Prompt (Admin)
WinKey (the button is located between the left Ctrl and Alt with the Windows logo)
Type the following commands and press ENTER.
cd\
cd Program Files (x86)\Skype\Toolbars\Outlook
regsvr32.exe /u S4OLDlgActions.dll
regsvr32.exe /u S4OLDlgSettings.dll
regsvr32.exe /u SafeSkypeO.dll
regsvr32.exe /u SkypeEmailComponent.dll
regsvr32.exe /u SkypeLanguageTranslator.dll
regsvr32.exe /u SkypeOLAddIn.dll
Restart your Computer.
Method 3
Delete Skype and Outlook client integration.
Press WinKey + R
Type: regedit.exe and press Enter
Locate and delete / rename the Skype subkey.
HKEY_CURRENT_USER\Software\IM Providers\Skype
Method 4
Uninstall Skype Email Toolbar
Press WinKey + R
Type: MsiExec.exe /I {FD710DA0-B768-48CD-B45F-BA175B6869DA} and press Enter then Remove Skype Email Toolbar.
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

How to handle Event in JACOB API

Hi,
I am read the outlook mail using JACOB[Java Com Bridge] API successfully, now i want to handle events for outlook mail using JACOB. and also i can able to catch the new mail event. but i am unable to catch any deleted mail and move mail from one folder to another folder. This is extremely important for my project. so any one please tell me how to handle and catch the Outlook deleted event and move event using JACOB.
Thanks in Advance,
With Regards,
Ganesh

Windows can be closed in a number of ways and the simplest way to trap them would be to handle Window Closing in code behind.
This is also the easiest way to show dialogs if that's how you wanted the warning message to appear.
This:
chxAllowToClose.IsChecked
Looks like a checkbox to me, seeing as you have IsChecked.
That presumably means you already have that bound to a viewmodel and visible to the user.
You can therefore just test that value from the view.
If you prefer to hide that instead then there are several options.
You could have a dependency property and a binding in code behind which binds to the viewmodel. Test that in your event.
Or
You could save the value when it changes to application.current.resources. Since dependency properties and bindings are a bit wordy this is easier.
Or
You could have just a variable in the view code behind and use messenger to tell that when the value changes from the viewmodel:
http://social.technet.microsoft.com/wiki/contents/articles/26070.communicating-between-classes.aspx
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML

How to convert Outlook Express6 messages to Outlook 2007

I down loaded the .dbx file form the laptop (XP)with OE6 to a file and installed that file on the Win7 desktop with Outlook 07. I have not been able to import the messages to Outlook 07. I did ask this a week ago and got a responce from Hal but it's not
in "My Threads". Thanks for any help.

Hi,
I have met this issue before and I solved it by this method.
I downloaded DBXconv and saved it into a directory with a copy of my Outlook Express mailbox files. I ran the following command to extract the messages into .eml format.
dbxconv -eml *.dbx
The utility quickly created a folder for each of my .dbx files and created an .eml file for each of my messages. I was then able to import the files into Outlook 2007 by:
1) Dragging the .eml files into Windows Mail
2) Exporting the messages from Windows Mail
3) In Outlook 2007, Selecting File – Import and Export – Import Internet Mail and Addresses
4) Select Outlook Express 4.x, 5.x, 6.x or Windows Mail
5) Check the Import Mail and Import Address book boxes and press
Next
6) In the Import Addresses window you can set how you want duplicates to be handled – Select the option and click
Finish
In addition, I find this KB article on Microsoft.com, it also introduces how to import Outlook Express messages into outlook 2007.
http://support.microsoft.com/kb/291602

TS3999 iCloud Outlook Addin not found

The 'iCloud Outlook Addin' is not installing to Outlook 2007 Trust Center when iCloud Setup installs.
I have done all the troubleshooting and followed suggestions to re-install iTunes, Quicktime, then icloud setup BUT the addin 'iCloudOutlookaddin' does not appear in the Outlook 2007 addins. Repeatedly the iCloudsetup goes to the option of run a CHANGE to repair iCloud in Programs and Features. This does not good. The iCloud control panel does not show options for calendar, mail, contacts, etc that can be checked off. Only a mesage with a link to www.iCloud.com is there. The setup does allo for the serttings for bookmarks and the photo stream.
I need help. I am running a 64 bit Windows Vista SP3 laptop with Outlook 2007. The iCloud refresh was present in my Outllok until iTunes 10.7 and iCloudsetup 2.0 were installed. I have downloaded the x64 version of iTunes.
I make this observation: The installer seeks to install to c:/program files x86/itunes/
This seems off to me since this is a x64 machine and I thought that software written for x64 would install to the Program files folder not the Program files x86 folder. Anyway, I allowed it to go to the default (Program files x86) twice. Once I even tried the other. I have removed and installed files too many times now and made no headway. I cannot find a discussion on the web that clarified this issue for me.
I need some help .... please. I need my data in Outlook not in the web browser environment. Try sending email and amkign appountments with invites across these two (Outlook and web: iCloud.com).
The Genius Bar helped me solved the problems with mutliple calendar and contact files. I was told how to uninstall and then re-install iTunes, and icloud. I found to support article in Apple Support that details how to do that and followed it to the 'T'.
Is there some value in the registry or a failed install of the addin going on? What do I do to fix this.
BTW: I have the updates runnng and Outlook syncing with icloud without problems on my 32 bit Windows 7 machine.
BWWiggs

Daniel,
Check out another thread regarding iCloud & Office 2013.
https://discussions.apple.com/message/22308583#22308583

How to handle exception CX_SY_REF_IS_INITIAL

hi experts,
im working on a test scenario for abap mapping in SAP XI im getting this error
An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference
i understand that i need to catch this exception in the abap coding but i'm not familiar with oops concepts
can any one please suggest me how to handle this exception for the following code...
method IF_MAPPING~EXECUTE.
break x1149.
* initialize iXML
TYPE-POOLS: ixml.
class cl_ixml definition load.
** Instances & Variable declaration =======================
* instance main factory
TYPES: BEGIN OF t_xml_line,
          data(256) TYPE x,
        END OF t_xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
* instance input stream factory
   l_streamfactory TYPE REF TO if_ixml_stream_factory,
* instance input stream
l_istream TYPE REF TO if_ixml_istream,
* instance input document
l_document TYPE REF TO if_ixml_document,
* instance parse input document
l_parser TYPE REF TO if_ixml_parser,
* instance for elements within the nodes
node      TYPE REF TO if_ixml_node,
*instance of nodemap
nodemap   TYPE REF TO if_ixml_named_node_map,
* instance for iterator
iterator TYPE REF TO if_ixml_node_iterator,
name      TYPE string,
value     TYPE string,
* instance main factory
   o_ixml   TYPE REF TO if_ixml,
* instance output document
   o_document TYPE REF TO if_ixml_document,
* instance output stream
o_istream TYPE REF TO if_ixml_ostream,
* instance parse output document
o_parser TYPE REF TO if_ixml_parser,
* instance fot renderer
renderer type ref to if_ixml_renderer,
irc type i,
l_xml_size   TYPE i,
*ROOT ELEMENT
l_element_MT_DEMANDTEC_COST TYPE REF TO if_ixml_element,
*NEXT CHILD ELEMENT FROM THE ABOVE PARENT
l_element_DT_DEMANDTEC TYPE REF TO if_ixml_element,
*CHILDREN1 ELEMENT FOR DT_DEMANDTEC
l_element_DT_WHSE TYPE REF TO if_ixml_element,
*CHILDREN2 ELEMENT FOR DT_DEMANDTEC
l_element_DT_DC    TYPE REF TO if_ixml_element,
*CHILDREN3 ELEMENT FOR DT_DEMANDTEC
l_element_DT_PLANT    TYPE REF TO if_ixml_element,
*CHILDREN4 ELEMENT FOR DT_DEMANDTEC
l_element_DT_QTY    TYPE REF TO if_ixml_element.
*saving the xml document
DATA: l_xml_table       TYPE TABLE OF t_xml_line.
types: begin of t_source,
          whse(5),
          dc(4) ,
          plant(4),
          qty    type i,
         end of t_source.
types: tt_source TYPE STANDARD TABLE OF t_source.
data: wa_source type t_source.
data: it_source TYPE tt_source,
        ivalue type string.
* Procedures and business logic =======================================
*   Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
*   Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
* create input stream
l_istream = l_streamfactory->create_istream_xstring( source ).
* initialize input document
l_document = l_ixml->create_document( ).
* Create a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
                                      istream        = l_istream
                                      document       = l_document ).
* parse input document
l_parser->parse( ).
*   Validate a document
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
*   Parse the stream
IF l_parser->parse( ) NE 0.
    IF l_parser->num_errors( ) NE 0.
      DATA: parseerror TYPE REF TO if_ixml_parse_error,
            str        TYPE string,
            i          TYPE i,
            count      TYPE i,
            index      TYPE i.
      count = l_parser->num_errors( ).
      WRITE: count, ' parse errors have occured:'.
      index = 0.
      WHILE index < count.
        parseerror = l_parser->get_error( index = index ).
        i = parseerror->get_line( ).
        WRITE: 'line: ', i.
        i = parseerror->get_column( ).
        WRITE: 'column: ', i.
        str = parseerror->get_reason( ).
        WRITE: str.
        index = index + 1.
      ENDWHILE.
    ENDIF.
ENDIF.
*   Process the document
IF l_parser->is_dom_generating( ) EQ 'X'.
    refresh : it_source.
    node ?= l_document.
    CHECK NOT node IS INITIAL.
*   create a node iterator
    iterator = node->create_iterator( ).
*   get current node
    node = iterator->get_next( ).
*   loop over all nodes
    WHILE NOT node IS INITIAL.
      CASE node->get_type( ).
        WHEN if_ixml_node=>co_node_element.
*         element node
          name    = node->get_name( ).
          nodemap = node->get_attributes( ).
        WHEN if_ixml_node=>co_node_text.
*         text node
          value = node->get_value( ).
          if name eq 'DT_WHSE'.
            wa_source-whse = value.
          ELSEIF name eq 'DT_DC'.
            wa_source-DC = value.
          ELSEIF name eq 'DT_PLANT'.
            wa_source-PLANT = value.
          ELSEIF name eq 'DT_QTY'.
            wa_source-QTY = value.
            COLLECT wa_source INto it_source.
            CLEAR   wa_source.
          ENDIF.
      endcase.
      node = iterator->get_next( ).
    endwhile.
ENDIF.
loop at it_source into wa_source .
    at first.
*       Creating a ixml factory
      o_ixml = cl_ixml=>create( ).
*       Creating the dom object model
      o_document = l_ixml->create_document( ).
    endat.
*       Build and Fill root node MT_DEMANDTEC_COST
    AT FIRST.
      l_element_MT_DEMANDTEC_COST    =
O_document->create_simple_element(
                              name   = 'MT_DEMANDTEC_COST'
                              parent = o_document ).
    ENDAT.
*      Build and Fill Child node DT_DEMANDTEC for parent
*                                                  MT_DEMANDTEC_COST
    l_element_DT_DEMANDTEC    = O_document->create_simple_element(
                                 name   = 'DT_DEMANDTEC'
                                 parent = l_element_MT_DEMANDTEC_COST ).
*      Build and Fill Child node1 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-WHSE.
    l_element_DT_WHSE    = O_document->create_simple_element(
                                     name   = 'DT_WHSE'
                                     VALUE = ivalue
                                     parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node2 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-DC.
    l_element_DT_DC   = O_document->create_simple_element(
                                         name   = 'DT_DC'
                                          VALUE = ivalue
                                parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node3 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-PLANT.
    l_element_DT_PLANT   = O_document->create_simple_element(
                                             name   = 'DT_PLANT'
                                              VALUE = ivalue
                               parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node4 DT_QTY for parent DT_DEMANDTEC
    ivalue              = wa_source-QTY.
    l_element_DT_QTY     = O_document->create_simple_element(
                                             name   = 'DT_QTY'
                                              VALUE = ivalue
                               parent = l_element_DT_DEMANDTEC ).
endloop.
* render document ======================================================
* create output stream
o_istream = l_streamfactory->create_ostream_xstring( result ).
*   Connect internal XML table to stream factory
o_istream = l_streamfactory->create_ostream_itable( table =
l_xml_table ).
renderer = o_ixml->create_renderer( ostream = o_istream
                                          document = o_document ).
irc = renderer->render( ).
* how do i catch the exception for type CX_SY_REF_IS_INITIAL ...?
endmethod.
full reward points for answers.
Thanks & Regards,
Uday Kumar.
Edited by: UDAY on May 6, 2008 9:32 PM

Hi Uday,
Its occurs because you're trying to access a objects with null reference. Or you forgot to create an instance or an error occurs during the instance creation. So You should put all your "Procedures and business logic" inside a Try/catch block. as follow.
" Define a class exception object to get error message......
DATA o_exception TYPE REF TO cx_sy_ref_is_initial.
"// Use the statment Try block to catch the error.
TRY.
*   Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
*   Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
* create input stream
l_istream = l_streamfactory->create_istream_xstring( source ).
* initialize input document
l_document = l_ixml->create_document( ).
* Create a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
                                      istream        = l_istream
                                      document       = l_document ).
* parse input document
l_parser->parse( ).
*   Validate a document
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
*   Parse the stream
IF l_parser->parse( ) NE 0.
    IF l_parser->num_errors( ) NE 0.
      DATA: parseerror TYPE REF TO if_ixml_parse_error,
            str        TYPE string,
            i          TYPE i,
            count      TYPE i,
            index      TYPE i.
      count = l_parser->num_errors( ).
      WRITE: count, ' parse errors have occured:'.
      index = 0.
      WHILE index < count.
        parseerror = l_parser->get_error( index = index ).
        i = parseerror->get_line( ).
        WRITE: 'line: ', i.
        i = parseerror->get_column( ).
        WRITE: 'column: ', i.
        str = parseerror->get_reason( ).
        WRITE: str.
        index = index + 1.
      ENDWHILE.
    ENDIF.
ENDIF.
*   Process the document
IF l_parser->is_dom_generating( ) EQ 'X'.
    refresh : it_source.
    node ?= l_document.
    CHECK NOT node IS INITIAL.
*   create a node iterator
    iterator = node->create_iterator( ).
*   get current node
    node = iterator->get_next( ).
*   loop over all nodes
    WHILE NOT node IS INITIAL.
      CASE node->get_type( ).
        WHEN if_ixml_node=>co_node_element.
*         element node
          name    = node->get_name( ).
          nodemap = node->get_attributes( ).
        WHEN if_ixml_node=>co_node_text.
*         text node
          value = node->get_value( ).
          if name eq 'DT_WHSE'.
            wa_source-whse = value.
          ELSEIF name eq 'DT_DC'.
            wa_source-DC = value.
          ELSEIF name eq 'DT_PLANT'.
            wa_source-PLANT = value.
          ELSEIF name eq 'DT_QTY'.
            wa_source-QTY = value.
            COLLECT wa_source INto it_source.
            CLEAR   wa_source.
          ENDIF.
      endcase.
      node = iterator->get_next( ).
    endwhile.
ENDIF.
loop at it_source into wa_source .
    at first.
*       Creating a ixml factory
      o_ixml = cl_ixml=>create( ).
*       Creating the dom object model
      o_document = l_ixml->create_document( ).
    endat.
*       Build and Fill root node MT_DEMANDTEC_COST
    AT FIRST.
      l_element_MT_DEMANDTEC_COST    =
O_document->create_simple_element(
                              name   = 'MT_DEMANDTEC_COST'
                              parent = o_document ).
    ENDAT.
*      Build and Fill Child node DT_DEMANDTEC for parent
*                                                  MT_DEMANDTEC_COST
    l_element_DT_DEMANDTEC    = O_document->create_simple_element(
                                 name   = 'DT_DEMANDTEC'
                                 parent = l_element_MT_DEMANDTEC_COST ).
*      Build and Fill Child node1 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-WHSE.
    l_element_DT_WHSE    = O_document->create_simple_element(
                                     name   = 'DT_WHSE'
                                     VALUE = ivalue
                                     parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node2 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-DC.
    l_element_DT_DC   = O_document->create_simple_element(
                                         name   = 'DT_DC'
                                          VALUE = ivalue
                                parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node3 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-PLANT.
    l_element_DT_PLANT   = O_document->create_simple_element(
                                             name   = 'DT_PLANT'
                                              VALUE = ivalue
                               parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node4 DT_QTY for parent DT_DEMANDTEC
    ivalue              = wa_source-QTY.
    l_element_DT_QTY     = O_document->create_simple_element(
                                             name   = 'DT_QTY'
                                              VALUE = ivalue
                               parent = l_element_DT_DEMANDTEC ).
endloop.
* render document ======================================================
* create output stream
o_istream = l_streamfactory->create_ostream_xstring( result ).
*   Connect internal XML table to stream factory
o_istream = l_streamfactory->create_ostream_itable( table =
l_xml_table ).
renderer = o_ixml->create_renderer( ostream = o_istream
                                          document = o_document ).
irc = renderer->render( ).
"   The Statement CATCH define a block that catches the exceptions of the
"   exception class cx_sy_ref_is_initial
    CATCH cx_sy_ref_is_initial INTO o_exception.
" If you need to get the error message text do as follow
DATA errorMsg type string.
" Get the message text
errorMsg = o_exception->GET_TEXT( ).
" Display the error information
MESSAGE errorMsg TYPE 'I'.
ENDTRY.
The TRY block defines a guarded area whose class-based exceptions can be caught in the subsequent CATCH blocks. If no exception occurs in the TRY block and it reaches its end, the system continues the processing after ENDTRY. If a class-based exception occurs in the TRY block, the system searches for an exception handler in the same or an external TRY control structure.
Font: SAP Help
You can see a how to create and use an exception in this example [ ABAP Objects - Defining a Class-based exceptions|https://wiki.sdn.sap.com/wiki/x/19w] .
Best Regards.
Marcelo Ramos

How to handle null values in RTF templates

Hi - I have two groups in a report for different SQL and two formulas for each group, CF_ELE_CNT and CF_ELE_CNT1. In the template I use the below code to print or not print a section.
<?if:number(CF_ELE_CNT +CF_ELE_CNT1) >0?>
The problem is when there is no data in the second group its not creating the XML tag for CF_ELE_CNT1, though CF_ELE_CNT has 13, it still does not print that partucular section. If I remove CF_ELE_CNT1 from the condition it works fine. I was wondering how to handle this.
Any help would be appreciated!!
Thanks,
Rav

Hey Rav,
You can add a check to identify it the element/tag is present or not
<?if:(CF_ELE_CNT1)?> will give true, if the element is present otherwise falsesince you are adding the two elements, you have to add a or condition.
<?if:(CF_ELE_CNT and number(CF_ELE_CNT) >0 ) or ( CF_ELE_CNT1 and CF_ELE_CNT1 >0)?>

How to handle file on application server without coading?

HI all,
can anybody tell me How to handle file on application server without coading? Is there any solution?
Thanks in advance.

> can anybody tell me How to handle file on application server without coading? Is there any solution?
what is that you want to handle. what you do if you don't code ...

Thoughts on how LabVIEW handles checkout of file from SCC when file already open

When you already have a file/project open in LabVIEW and it is set to read only because you haven't checked it out, you can go into SCC and do a checkout then save the file immediately. The issue with this is, if your local copy doesn't match the copy in SCC, you will probably be overwriting changes. Sometimes this is convenient because if you have ever edited a MS Word file and then gone to save and it won't let you because it was opened as read-only...then that sucks because you either lose your work, or have to do a copy of the entire word file->close the program->re-open as writable, then paste. This can be avoided with the "LabVIEW way", but the "MS Word" way seems much safer because it forces you to conscioiusly make the file writable (by either checking it out or manually write clicking and changing to writable) BEFORE opening it. I just wanted people's opinions on how LabVIEW handles this, and if there would be a better way.
CLA, LabVIEW Versions 2010-2013

VSS
CLA, LabVIEW Versions 2010-2013

How to handle password changes if we implement singlesignon between BO& BI7

Hi,
As we know ,we can implement single signon between BO and SAP BI 7, by importing roles and users through CMC and by selecting the option "Use Single signon during report refresh time".
My doubt here is, When we import roles from SAP and Auto import the users, is it only the SAP usernames that are stored in BO repository or both username and password. If second case holds true then how to handle/manage password change for a user who is already imported in BO sometime back?
Would the password changes be reflected automatically in BO?
Please guide me if you think that I'm thinking in a wrong direction.

Hi Naresh,
password changes are reflected automatically in BO. BO just forwards the data to the SAP side and it does the real authentification.
Regards,
Stratos
PS: Keep in mind that you cannot change the SAP password on the BO login screen if your SAP password has expired. You have to do this with the SAP client (SAP GUI)

How to handle rpc/encoded style messages using BizTalk?

I am integrating with a lot of services and one of our customers has a service with rpc/encoded style
I could consume and generate schema from their wsdl file via BizTalk consume WCF wizard.
Once I am trying to call the service with request message that generated from the schema, it is giving an error that can not desterilize the first element of the message.
No Deserializer found to deserialize a 'FieldName' using encoding style 'null'
I compared the stub xml request message from SaopUI and I noticed that the xml expecting the data type with the element like this .
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsb="WSBanka">
<soapenv:Header/>
<soapenv:Body>
<wsb:bnkBorcsorgulama soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<sozlesmeNo xsi:type="xsd:string">?</sozlesmeNo>
<bankaKodu xsi:type="xsd:string">?</bankaKodu>
<anahtar xsi:type="xsd:string">?</anahtar>
</wsb:bnkBorcsorgulama>
</soapenv:Body>
</soapenv:Envelope>
On the other hand, I got the request of the message from Fiddler using the BizTalk , and the generate xml of the BizTalk schema without the data type.
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsb="WSBanka">
<soapenv:Header/>
<soapenv:Body>
<wsb:bnkBorcsorgulama>
<sozlesmeNo>?</sozlesmeNo>
<bankaKodu>?</bankaKodu>
<anahtar>?</anahtar>
</wsb:bnkBorcsorgulama>
</soapenv:Body>
</soapenv:Envelope>
In SoapUi, if I remove a datatype from the message, I will get same error from the BizTalk request.
I read some articles that rpc/encoded style are not supported but I am not sure and these articles are not clear.
I also read that it was supported with Soap adapter but now it is deprecated.
So, Is there any one has an experience in rpc/encoded style messages and how to handle these message in BizTalk or is there any work around to handle these messages?
Your inputs really appreciate it.
Thanks in advance,
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Hi,
Please refer to the document which might help you:
#RPC/Encoded Style
http://www.c-sharpcorner.com/UploadFile/martinkropp/DesigningInteroperableWebService11232005044847AM/DesigningInteroperableWebService.aspx

How to handle the OK button of the parameters prompt of a crystal report

Hi,
how to handle the OK button of the parameters prompt of a crystal report in vba.NET?
I want to use the parameter prompt from the crystal report itself and I want to know when the report is ready. I need to export programatically by sending email to a list of employees after the parameters has been set. The emails I send depends on the results of the report.
Im using a CrystalReportViewer control in VS2010 and Crystal Report for VS2010 v13.0.1.220.

Right. But the parameter screen is driven by the viewer. Unless you create your own parameter screen and pass the parameters to the report via code.
Another thing I am not sure about:
"Then by code I want to read all the employees id from the report and send email to them with specified pages of the report. (1 page per employee)"
How do you plan on reading the employee ID from the report? I am not aware of any API that will read a value in a report so that you can then decide what page to send to whom.
I think you're approaching this kinda backwards. A question to ask is; can you do what you are trying to do in code in the CR designer? If not, using APIs will not work either. I suspect your approach should be a report that uses an employee filter. Run the report for employee x, get the report populated with the data for that employee and email it. Repeat for employee x1, employee x2, etc.
- Ludek

How to handle OUTLOOK addin InactiveList in APPV 5.0

Similar Messages

Maybe you are looking for