How to handle RH8's HTML rewrites?

Hello all,
From this forum, I've leaned some of the "unique" characteristics of the RH8 WYSIWYG editor and how it can rewrite HTML when jumping back and forth between Design and HTML views.
In many topics, I've added "Top" links so readers can jump to the mini-TOC at the top. I enter
<a href="#" class="top">Top</a>
in the HTML editor and style it w/ CSS.
Of course RH8 rewites this to
<a href="#" class="top" style="color: #0000ff; text-decoration: underline; ">Top</a>
and the CSS I need to use is overridden by the inline style. Bummer.
So I need a sanity check on the best way to maintian clean HTML and retain control with CSS - at least until the project is generated. Here's what I'm doing thus far.
1. Add my "Top" links to all my topics in HTML view: <a href="#" class="top">Top</a>.
2. Complete EVERYTHING else I need to do in RH8, except generate the project.
3. Do a Find a Replace on all the topics in the project to swap out
<a href="#" class="top" style="color: #0000ff; text-decoration: underline; ">Top</a>
for
<a href="#" class="top">Top</a>
4. NEVER open those topics in the WYSIWYG editor again.
5. Generate the project.
Alternatively, I guess I could use a 3rd party Find and Replace tool to swap the HTML code for the "Top" link AFTER the project was generated.
Naturally, this only works until those topics need to be worked on in RH8's WYSIWYG editor. Once that happens, the above steps need to be repeated.
Is there a better way to do this? Am I doing too much work for something that should be simple?
Thanks for any wisdom you can share.
Patrick

Hi there
From what you posted I'm guessing you inserted a bookmark at the top of the page that is labeled #top? If so, that's not really needed. You can remove the bookmark and just link to just # and the page reloads.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Similar Messages

How to handle the Non HTML Documents in BSP

Hi All,
I want to upload the file which contains the non HTML data.
I am using the browse button and from the destop i should downloap a file which is non HTML document.
It would be appriciatable if you send me the code.
Iam using the html:fileupload tag
Thanks,
Mahalakshmi.K

Hi Rajdeep,
You can use the below tag which is used to change both the font and color of the text.
<font face="Book Antiqua,Garamond" size="3" color="red"> YOUR TEXT HERE </font>
This will work for the normal text which is given between the <font> </font> tags. but not directly with the Text View tag.
You can choose this as an alternative.
Thanks,
Ansar
Edited by: Ansar Hussain on Dec 3, 2008 9:25 PM

How to handle html:multibox in jsp with ADF Data Binding

Hi,
I like to use html:multibox feature in my jsp with ADF Data Binding. I am able to retrieve checked values in the DataForwardAction form. However, when the page is refreshed, the checkboxes are not persistent and yet an error showing
"JBO-25009: unable to create object type ....oracle.jbo.domain.Array" appears.
Here is my jsp code:
<c:forEach var="type" items="${bindings.SystemTypeView1.rangeSet}">
<c:if test="${Row['SystemGroup'] == type['SystemGroup']}">
<br>
<html:multibox property="selectedSystemType">
<c:out value="${type.SystemType}"/>
</html:multibox>
<c:out value="${type.TypeDesc}"/>
</c:if>
</c:forEach>
Can anyone tell me how to handle html:multibox with ADF Data Binding and make the checkboxes persistent.

Generally this can be done.
I see a problem with your use case, which has nothing to do with jdev or java:
How do you identify the user when he comes back to finish the form?
For this you can't use information like session cookie or IP address because they change.
So you have to save some information about the user which lets you identify him when he comes back. All other requirements can be implemented by ADF.
Timo

Drive Utility Help Viewer "does not know how to handle selected URL"

I have Drive Utility 10.5.6, according to . I'm trying to reformat a FAT32 partition on an external drive to Mac OS X Ext. Journaled in preparation for using SuperDuper to back up my Mac HD boot partition. For a time, which seems to have passed, now that erasing the partition has been done. The Disk Utility Help wouldn't work. Instead of putting up topic information, I got a message saying "Help Viewer does not know how to handle selected URL", followed by an reference to an html file that allegedly existed inside a set of folders inside the app. Where, of course, Finder cannot see. Once the erasing was done, Help seems to have come back. I tried Apple Support, but could only get a reference to OS 9 Appleworks macros not working in OS X. No help at all. Is this a question? I don't know. Help is working now. But for a while it was very annoying. It must be one of those little windows glitches that no one ever bothered to fix.

In order to change a FAT or NTFS formatted drive for use with OS X you will need to do the following:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you have an Intel Mac and can partition the drive using GUID then you can have FAT32 and OS X partitions on the same drive.
As for problems with the Help viewer see:
In most cases doing the following will restore the Help Viewer:
1. Trash the following three files, if extant:
/Home/Library/Preferences/com.apple.help.plist
/Home/Library/Preferences/com.apple.helpui.plist
/Home/Library/Preferences/com.apple.helpviewer.plist
2. Trash the /Home/Library/Caches/com.apple.helpui folder.
3. Empty the Trash and Restart.
Visit The XLab FAQs and read the FAQ on the Help Viewer for additional suggestions.

How can I import bookmark HTML records directly into pre-defined (but empty) Folders?

Firefox is my default browser. I am in the process of replacing an old computer with a new one. I've converted into HTML files the Bookmark content of all of the Folders appearing within the Bookmarks section of Firefox on my old computer. I then uploaded this into the cloud, and downloaded it to my new computer. I've loaded Firefox afresh on the new computer. Now . . .
Ideally, I would like to be able to import these saved/HTML bookmarks (now on my new computer) directly into the new Firefox, keeping the Folder structure maintained in saving them from the old computer; less ideally, but still acceptable, would be to simply re-create as empty Folders each Folder from the old computer's Firefox setup and then do a 'Select All' copy/paste from each of these Folders as saved in my downloaded HTML bookmarks into these initially empty Folders created in the new computer's Firefox Bookmarks section. Is either of these currently possible? In short, this is a quite distinct scenario from importing bookmarks from other browsers on the same computer.
I have tried, but it seems that neither of these functions is currently viable. As common as replacing one computer with another is, I find this a pretty significant oversight which will require a very time consuming conversion process if such functions are not currently available; i.e., I'll have to open each saved HTML Folder and manually activate each individual html bookmark, go to that website, and individually re-bookmark each of these one by one within the Bookmarks section of Firefox on my new computer as if I were bookmarking this site for the very first time. With hundreds and hundreds of bookmarks segregated into about 30 Folders, I think you can see what a productivity drain this will be.
While there appear to be some quite interesting and potentially useful FireFox Addons - e.g., Categorize - none of these seems to address/resolve this problem. Can you advise? Thank you.

To start out with, Firefox hasn't used the HTML format for storing bookmarks for a few years now; you can still import and export bookmarks in HTML format, as you can with just about any other browser out there as an interchange format. Firefox 3.0+ versions use an SQLite database for storing bookmarks and browsing history in the place.sqlite file. Firefox 3.0+ versions do automatic backups of your bookmarks in the JSON format; that file includes "Tags" data but not the web site Favicon data. Restoring a backup from an old PC to the new PC is how Mozilla handles replacing an old computer - or you can "backup" the entire old Profile and transfer that data to the new PC manually. A user could also use Firefox Sync to "sync" their personal data onto the new PC. IMO, you're over-thinking this using dated information (talking about HTML files) without knowing about what options you currently have with Firefox and Mozilla.
Is that a genuine Netscape-1 bookmarks.html file? ''Look at the first line of code in that HTML file to see.'' <br />
Or is it a standard HTML file?
If you have a genuine bookmarks.html file, you can '''Import''' that file thru Organize Bookmarks > Import and Backup > Import HTML... > From an HTML file.
Doing it that way you will be appending the bookmarks & folders that are in the '''Bookmarks Menu''' folder right now. The ordering of the folders and bookmarks in the "imported" file is identical, the "imported" data is added below the existing data. That said, the '''''Bookmarks Toolbar''''' folder and the '''''Unsorted Bookmarks''''' folder from the "imported" data will be in the Bookmarks Menu folder at the bottom; you'll have to move the bookmarks that are in that folder to their respective folders, above and below the Bookmarks Menu folder.

How to handle multiple soap operations from XI ?

Hi Experts,
I am sap xi guy and we need to handle a webservcie which has multiple operations. any body can guide how to handle this ?
In xi soap receiver adapter we have an option going only for a single soap action ? can sap handle rpc style format of webservice ? what is meant by rpc
any help would be really appreciated
Thanks,
srini

Hi Srinivas,
Please refer to this article on how to handle the soap action. Hope this will help you understanding the soap action mistery.
http://www.oreillynet.com/xml/blog/2002/11/unraveling_the_mystery_of_soap.html
Regards
Sumit Bhutani

How to handle http 302 response in OEG

how to handle http 302 response.
The URL has moved <a href="https://............................
I am using "Connect to URL" and "Reflect message" filters and I am getting http 302 response. In the http esponse body/content I have the "The URL has moved <a href="https://............................"
How to connect to this url.
Thank you very much for your help.

hi
I took your advise on the second approach and added new filter to catch 302 response and read the new URL from Location. Here is the flow.
Connect to URL --> Is HTTP CODe =302 --> Retrieve Location from Http Header- Rewrite URL - Dynamic Router - Connection
I am getting a new error as below. I verified the certificates using the below open ssl comands and added them to the certificate store in OEG. The error comes from the Redirect URL which is cs12.salesforce.com
C:\Program Files\GnuWin32\bin>openssl s_client -connect test.salesforce.com:443 -showcerts
and
C:\Program Files\GnuWin32\bin>openssl s_client -connect cs12.salesforce.com:443 -showcerts
thank you for your time and help.
ERROR 06/May/2012:00:22:23.125 [14e0] nested fault: SSL protocol error
error:140CF086:SSL routines:SSL_VERIFY_CERT_CHAIN:certificate verify fai
led
error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate veri
fy failed:
java.lang.RuntimeException: SSL protocol error
error:140CF086:SSL routines:SSL_VERIFY_CERT_CHAIN:certificate verify fai
led
error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate veri
fy failed
at com.vordel.dwe.ConnectionCache.getConnection(Native Method)
at com.vordel.circuit.net.ConnectionProcessor$State.tryTransaction(Conne
ctionProcessor.java:482)
at com.vordel.circuit.net.ConnectionProcessor.invoke(ConnectionProcessor
.java:650)
at com.vordel.circuit.InvocationEngine.invokeFilter(InvocationEngine.jav
a:154)
at com.vordel.circuit.InvocationEngine.invokeCircuit(InvocationEngine.ja
va:43)
at com.vordel.circuit.InvocationEngine.processMessage(InvocationEngine.j
ava:229)
at com.vordel.circuit.SyntheticCircuitChainProcessor.invoke(SyntheticCir
cuitChainProcessor.java:36)
at com.vordel.dwe.http.HTTPPlugin.invokeDispose(HTTPPlugin.java:290)
at com.vordel.dwe.http.HTTPPlugin.invoke(HTTPPlugin.java:131)

How to handle user preference which has "_" and " " in the name

Hi Experts,
I have a question how to handle value which has like "_" and "space" etc in user preference.
If setting "a_b-c d", I could not retrieve this because it's escaped in database.
So this code can't get value even though I can set it.
Is there any restriction of name? Is there any documentation how to code user prefernece which has non alphabet and number in the name?
I know it's possible to handle the data like adding escaped data. But I don't think this is the best way to retrieve the data. Because nobody confirm it's not problem in the future.
Could you tell me the best way to get these user preference?
Thanks in advance,
Masaaki Tada
Here is a sample.
<%@ page contentType="text/html;charset=Shift_JIS" %><%@ page language="java" import="com.plumtree.remote.portlet.*, com.plumtree.remote.prc.*, java.util.*" %>
<%
/** * UserInfo - Simple Page * Display User Information*/
// VariablesIPortletContext oPortletContext = null;IPortletRequest oPortletRequest = null;IPortletUser oPortletUser = null;IPortletResponse oPortletResponse = null;IRemoteSession s;IUserManager oUser;
/* Get Portlet Objects */
try{oPortletContext = PortletContextFactory.createPortletContext(request, response);oPortletRequest = oPortletContext.getRequest();oPortletUser = oPortletContext.getUser();oPortletResponse = oPortletContext.getResponse();} catch (Exception e) {oPortletContext = null;oPortletRequest = null;oPortletUser = null;oPortletResponse = null;}
String val = oPortletRequest.getSettingValue( SettingType.User, "a_b-c d" );String hoe = oPortletRequest.getSettingValue( SettingType.User, "abcd" );out.println( "a_b-c d: " + val );out.println( "abcd : " + hoe );
oPortletResponse.setSettingValue( SettingType.User, "a_b-c d", "aiueo" );oPortletResponse.setSettingValue( SettingType.User, "abcd", "bbbb" );%>

Plumtree recommends that user preference names have only alphanumeric characters in them (a-z, A-Z, 0-9). Any non-alphanumeric characters will be encoded by the EDK.
I strongly suggest that you change your user pref name to something that's alphanumeric. However, if that is not possible, you can use the following workaround: in the web service editor, enter the encoded name for the user pref. There are several ways to get the encoded name.
One way is to encode the pref manually, yourself. Plumtree uses the %u encoded format: each non alphanumeric character is converted into %uxxxx, where xxxx is the Unicode representation of the character. For all ASCII characters, just look at the ASCII hex chart. For example, character "-" has a hex value of 2d. So, a preference name "jane_pref" would be encoded to "jane%u002dpref", and you'd enter the latter value on the preferences page in the web service editor.
The other way to find out the encoded value is to set a preference programmatically and use the HTTP tunnel tool to look at HTTP traffic between the portal server and remote server. The remote server will be sending a HTTP header to the portal server (the header name will probably be CSP-User-Pref) and inside the header you should see the pref name, encoded with %u. Just copy it out of there and into the web service editor.
Hope this helps,
Jane

Model of how APEX handles data (values)?

Reference {thread:id=2486655}
I'm trying to get a model of how APEX handles data (values). There are several places(?) that data (values) can exist. Or so it seems. I'm trying to understand how these work -- to put all the pieces together.
Question:
A) Where data can be?
1) In the database
2) In the session
3) Rendered -- and hence displayed on the screen, if a displayed value -- but not in the session
4) In perhaps(?) some working memory pool(?) but different from the page rendered values I see on the screen?
5) Other?
Why do I think this is relevant?
Question:
B) If there are rendered values and session values different from the rendered values, then when code executes, which of these values (rendered or session) is it executing against?
And maybe the answer is, "You don't understand what's going on." Yes, "Exactly!" Hence the question.
Best wishes,
Howard

Howard (DBA in Training) wrote:
I'm putting this together now. For example:
I set the value of a Page Item (say, :P2_DATA) to "BEFORE" in a Before Region process and change it to "AFTER" in an After Region Process. 'BEFORE' was displayed on the screen but 'AFTER' was in the session state. So I see that PL/SQL changes these values in the session state. But it doesn't "go back" to change the HTML after the region has been rendered -- hence we see BEFORE shown on the screen. (I'll have to think about what a Dynamic Action does.)
Also, if a page item has a default value, say 'DEFAULT' then that value doesn't get into the session state. At least, not with my current settings. Oh, that explains a lot of confusion!! I suppose there's a logical reason for this but who would expect default values to be differently from other PL/SQL operations on the item?
Questions:
1) So why does a default value not get put into the session state?Several reasons, among them:
*1. When/why is the value required?* Region items (and thus their source and default values) are rendered in region/item sequence order. The item's source/default value would therefore not be available in session state until it's rendering point. This is frequently later in page show processing than the value is actually required, such as the common use case of including a data value in the page or region title. Setting the value in a Before Header/Regions computation or process makes it available as required before the item is actually rendered.
*2. The rendered page might not be submitted.* Default values are typically set when a page will create a new row. Consider the situation where the user clicks a "Create" button and is presented with an order entry form containing several default values. They then decide they don't want to create a new order after all, and navigate away from the form page via some mechanism that uses a redirect rather than a submit (such as a default "Cancel" button). This means that no page submit processing is performed, and generally that no session state management is performed. If the default values were set in session state, the order entry page would contain the default values for the non-existent order despite the user never submitting it. This may have unwanted side-effects if these values are referenced elsewhere in the application, and therefore would require extra session state management to be built into the application.
*3. A rendered item might not be submitted with the page.* Per the HTML specification, the values of disabled controls unchecked checkboxes are not POSTed on page submit. Consider a situation where a checkbox item is set with several default values, but the application requires that the checkboxes be cleared and disabled by a dynamic action if the user chooses certain options from a select list. In this case, on page submission no values are submitted into session state for the checkbox item. If the defaults had been set in session state, then the application would be in an inconsistent state, with the user-selected option indicating that none of the checkboxes were checked, but with session state holding values showing that they were. This would require additional processing to ensure that the application's state was consistent before saving it to the database.<sup>1</sup>
2 & 3 are particularly significant in basic wizard-generated applications. Doing things in this way, the wizard-generated DML and navigation "just works", without the need for additional session state management.
2) Is there a Page Item setting that causes the default value to be saved to the session state?No. Hopefully the explanations above provide sufficient reason to show why this is genearlly not desirable. On the rare occasions when it is required, set the session state value using a computation or process.
<sup>1</sup> There are other reasons—mainly security related—that make it good practice to perform such checks in more complex and internet-facing applications anyway.

How to handle "xsd:anyAttributes" with jaxb

Need help for how to handling "xsd:anyAttribute" with jaxb!
Here is part of my xml schema.
<xsd:attributeGroup name="DataAttributes">
<xsd:anyAttribute namespace="##local" processContents="lax"/>
</xsd:attributeGroup>
<xsd:element name="Data">
<xsd:complexType>
     <xsd:attributeGroup ref="DataAttributes"/>
</xsd:complexType>
</xsd:element>
<xsd:element name="MA_Verify">
<xsd:complexType>
     <xsd:sequence>
     <xsd:element ref="Data" minOccurs="0" maxOccurs="unbounded"/>
     </xsd:sequence>
     <xsd:attributeGroup ref="verifyAttributes"/>
</xsd:complexType>
</xsd:element>
I have an application which only knows the attribute names and values at runtime. (Thest attributes are string.) Therefore, I cannot define attribute names in the schema and have to use xsd:anyAttribute.
I was able to generate all jaxb code. However, the interfaces generated for Data and DataType are basically all empty. The impl classes are empty too, since no get or set methods exist for the attribute.
Some thoughts for handling this case, but do not know if it will work.
(1) write some derive classes on top of the generated jaxb classes.
(2) write customized method to handle the 'Data' element level and its attributes. Similar to parseMethod or printMethod for the javaType.
(if there is a way)
Can anyone give me suggestions, directions or an laternate way to handle the situation?
Your help will be greatly appreciated.
Ruth

xsd:anyAttribute is not supported by JAXB.
http://java.sun.com/xml/jaxb/users-guide/jaxb-works.html#unsupported

RemotePayloadChangeEvent - how to handle

I have implemented a player for streaming media files. When I receive NewReceiveStreamEvent or ActiveReceiveStreamEvent, I get the DataSource from event's ReceiveStream, create a realized player and start it:
DataSource source = event.getReceiveStream().getDataSource();
Player player = Manager.createRealizedPlayer (source);
if (player.getState() != Player.Started)
player.start();
}When playback is done, i close the player. For most streams it works fine. Except for some streams, i get the RemotePayloadChangeEvent in the middle and I don't know how to handle it. If I ignore this event, audio playback stops. if I get the datasource and do start() on it, audio playback runs to completion, but I hear some background ticking noise.
I need help as to how best to handle this event.
Thanks in advance.

hi
I took your advise on the second approach and added new filter to catch 302 response and read the new URL from Location. Here is the flow.
Connect to URL --> Is HTTP CODe =302 --> Retrieve Location from Http Header- Rewrite URL - Dynamic Router - Connection
I am getting a new error as below. I verified the certificates using the below open ssl comands and added them to the certificate store in OEG. The error comes from the Redirect URL which is cs12.salesforce.com
C:\Program Files\GnuWin32\bin>openssl s_client -connect test.salesforce.com:443 -showcerts
and
C:\Program Files\GnuWin32\bin>openssl s_client -connect cs12.salesforce.com:443 -showcerts
thank you for your time and help.
ERROR 06/May/2012:00:22:23.125 [14e0] nested fault: SSL protocol error
error:140CF086:SSL routines:SSL_VERIFY_CERT_CHAIN:certificate verify fai
led
error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate veri
fy failed:
java.lang.RuntimeException: SSL protocol error
error:140CF086:SSL routines:SSL_VERIFY_CERT_CHAIN:certificate verify fai
led
error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate veri
fy failed
at com.vordel.dwe.ConnectionCache.getConnection(Native Method)
at com.vordel.circuit.net.ConnectionProcessor$State.tryTransaction(Conne
ctionProcessor.java:482)
at com.vordel.circuit.net.ConnectionProcessor.invoke(ConnectionProcessor
.java:650)
at com.vordel.circuit.InvocationEngine.invokeFilter(InvocationEngine.jav
a:154)
at com.vordel.circuit.InvocationEngine.invokeCircuit(InvocationEngine.ja
va:43)
at com.vordel.circuit.InvocationEngine.processMessage(InvocationEngine.j
ava:229)
at com.vordel.circuit.SyntheticCircuitChainProcessor.invoke(SyntheticCir
cuitChainProcessor.java:36)
at com.vordel.dwe.http.HTTPPlugin.invokeDispose(HTTPPlugin.java:290)
at com.vordel.dwe.http.HTTPPlugin.invoke(HTTPPlugin.java:131)

How to handle time&date

can anyone tell me how to handle time&date correctly?using Calendar,GregorianCalendar,TimeZone,Locale
thank you very much

This is too large a topic to discuss in depth here. Here is a link to a tutorial on times and dates, and a search link that references many documents on the subject.
http://java.sun.com/docs/books/tutorial/i18n/format/dateintro.html
http://onesearch.sun.com/search/developers/index.jsp?and=calendar+&nh=100&phr=how+to&qt=&not=&field=&since=&col=javatecharticles&col=javatutorials&col=devall&rf=0&Search.x=20&Search.y=7
When you have specific questions, just ask.

Cannot handle type text/html

I created a PDF in Acrobat 8, and did some editing in LiveCylce. The link buttons all work in LiveCycle preview mode. I saved in edit mode. Buttons that have a http link don't work, and I get an error message, "cannot handle type text/html"
The 'link to' website pages are spelled/entered correctly, the website/page that I want the links in this PDF form are 'up and running' just fine - what does this mean, how do I fix it?

I was using the 'http submit' button. I thought that meant when the person clicked on that button, which had a URL assigned to it, that it would take them out to (the web site page you wanted them to arrive at). Throw a bone, what am I supposed to use??

How to handle Chinese on WL 6.0 sp1

          Hi all,
          I got a strange experience when i'm trying to handle chinese character in
          JPS. I wrote a simple JSP (test.jsp) performing "FORM POST" to see whether i can
          get the "right" chinese character after FORM POST. The program is written as below:
          <%@ page info="test page" session="true" buffer="1024kb"
               import="java.sql.*, java.util.*, java.lang.*" %>
          <%
          response.setContentType("text/html; charset=UTF-8");
          try {
               String s1a = request.getParameter("field1");
               String s2a = request.getParameter("field2");
          %>
          <HTML>
          <HEAD>
          <TITLE>DUMMY No. 1 ^.^ </TITLE>
          </HEAD>
          <BODY>
          <BR>~~FORM POST TESTING~~<BR>
          <FORM name="frm1" action="test.jsp" method="post">
          Field 1: <INPUT type="text" name="field1"><BR>
          Field 2: <INPUT type="text" name="field2"><BR>
          <INPUT type="submit"><BR>
          </FORM>
          <%=s1a%> || <%=s2a%>
          </BODY>
          </HTML>
          <% } catch (Exception e) {
               out.println("Error : " + e.getMessage());
          %>
          Everytime when i entered a chinese character, i got some strange character
          or even nothing after FORM POST. Do you know why or could you advise me how to
          fix it? I'm using Window 2000 professional english version, default locale is
          Hong Kong, and WebLogic 6.0sp1.
          Thanks in advance.
          Regards,
          Ralpho


Hi Ralpho,
          check out
          http://e-docs.bea.com/wls/docs60///adminguide/config_web_app.html#100357
          , I think it should help.
          Cheers,
          Daniel
          > -----Ursprüngliche Nachricht-----
          > Von: Ralpho [mailto:[email protected]]
          > Bereitgestellt: Donnerstag, 21. Juni 2001 04:16
          > Bereitgestellt in: jsp
          > Unterhaltung: How to handle Chinese on WL 6.0 sp1
          > Betreff: How to handle Chinese on WL 6.0 sp1
          >
          >
          >
          > Hi all,
          >
          > I got a strange experience when i'm trying to handle
          > chinese character in
          > JPS. I wrote a simple JSP (test.jsp) performing "FORM POST"
          > to see whether i can
          > get the "right" chinese character after FORM POST. The
          > program is written as below:
          >
          > <%@ page info="test page" session="true" buffer="1024kb"
          >      import="java.sql.*, java.util.*, java.lang.*" %>
          > <%
          > response.setContentType("text/html; charset=UTF-8");
          >
          > try {
          >      String s1a = request.getParameter("field1");
          >      String s2a = request.getParameter("field2");
          > %>
          >
          > <HTML>
          > <HEAD>
          > <TITLE>DUMMY No. 1 ^.^ </TITLE>
          > </HEAD>
          > <BODY>
          > <BR>~~FORM POST TESTING~~<BR>
          > <FORM name="frm1" action="test.jsp" method="post">
          > Field 1: <INPUT type="text" name="field1"><BR>
          > Field 2: <INPUT type="text" name="field2"><BR>
          > <INPUT type="submit"><BR>
          > </FORM>
          > <%=s1a%> || <%=s2a%>
          > </BODY>
          > </HTML>
          > <% } catch (Exception e) {
          >      out.println("Error : " + e.getMessage());
          > }
          > %>
          >
          > Everytime when i entered a chinese character, i got some
          > strange character
          > or even nothing after FORM POST. Do you know why or could you
          > advise me how to
          > fix it? I'm using Window 2000 professional english version,
          > default locale is
          > Hong Kong, and WebLogic 6.0sp1.
          >
          > Thanks in advance.
          >
          > Regards,
          > Ralpho
          >

How to handle Webservice

Hi Experts,
I want to know how to handle webservice in web Dynpro Application.
I need some documentation regarding this.
can any one help me.
Advance Thanks,
P.J.Balaji

Hi Balaji,
Check These links..
<a href="https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/faq-Models-AdaptiveWebService&">Adaptive Webservices</a>
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/6bfb2c4e-0a01-0010-8eb4-f21a42d8f6ec [original link is broken] [original link is broken]
<a href="http://www.systinet.com/resources/tutorials">Webservice tutorials</a>
<a href="http://www.onjava.com/pub/a/onjava/2001/08/07/webservices.html">Java Webservices and Primer</a>
<a href="http://www.learningtree.com/courses/577.htm">Building XML webservices with Java</a>
[url=http://www.accelebrate.com/java_webservices_training/web_services.htm]Introduction[/url]
Urs GS

How to handle RH8's HTML rewrites?

Similar Messages

Maybe you are looking for