How to handle system messages neatly in ibot/dashboard reports

From time to time system based issues go wrong when running ibots based on dashboard reports - table missing etc
the error message system kicks in and inplace of a neat graph or report appears a huge system based error message with the sql used. This is not a good way to present reports to our execs. Is there a way of handling this neatly so the very technical large error can be replaced with a runtime generated message instead, something equivallent to the No Results message

Hey Vasanth,
How did u handle the dump messages?
Regards
Deepa.

Similar Messages

How to create system message in SAP EP?

Dear All,
How to create system message in SAP EP?
i need to find solution for this task. Is there any way without collaboration? For example in SLD there is "System message" without additional functions. Please help.
Portal installed on Netweaver 7.01 EHP1

Hi Abay,
You need to develop custom application to accomplished your requirement for system message in the potral.
Please have a look at "Brodcast messages to logged on users in Portal:
Brodcast messages to logged on users in Portal(Part1)
Brodcast messages to logged on users in Portal(Part2)
Also you can develop system message in the KM and integrate in the portal.
Hope it will helps,
Regards, Arun Jaiswal

How To Handle Error Message In TCD Recording?

Hi All,
I tried recording a transaction (my own transaction) by not enterring value in an obligatory field. the error message came. but when i executed the script, it showed an error. but actualy, the error message was expected right? how to handle this situation? i tried with tcd and sapgui recording. both gave almot the same result.
i am including the script which i have written.
MESSAGE ( MSG_1 ).
*TCD ( ZCUST , ZCUST_1 , ECC ).
SAPGUI ( SAP_1 , ECC ).
ENDMESSAGE ( E_MSG_1 ).
v_mno = &tfill.
v_msg = E_MSG_1[v_mno]-msgtext.
v_mtp = E_MSG_1[v_mno]-msgtyp.
If Msg Type is E *** **** It Has To Be E ****
IF ( v_mtp = 'E' and v_msg = 'Account no AC02 does not exist EXIT = X').
logtext(0,'Passed').
ELSE.
log(v_mtp).
log(v_msg).
logtext(1,'Failed').
ENDIF.
End Of The Condition For Message Type E ******

I have recording messages using the TCD command.
My script (very simple):
MESSAGE ( MSG_2 ).
TCD ( ME21 , ME21_1 , R3 ).
ENDMESSAGE ( E_MSG_2 ).
In the MESSAGE command interface, I defined rules to allow several kind of messages.
Execution: 3 mesages found:
      * transform PR into PO
       MESSAGE     MSG_2 [1,009 sec]
         RULES MSG_2 = XML-DATA-01
        Message MODE EXIT TYPE ID    NR
        [1]      'A'         'I'   06    456
        [2]      'A'         'W'   'ME' 080
        [3]      'A'         'E'   'ZE' 029
         TCD    ME21                 [0,545 sec N] Target sys R3 -> ZDA010A219
        S06017 Standard PO created under the number 8201075606
           Tgt System Z_A219->R3->ZDA010A219 (ZDA 010 ... HP-UX ORACLE)
           CALL TRANSACTION ME21 ME21_1 XML-DATA-01
           03 MESSAGES FROM ME21 ME21_1 XML-DATA-01
           I 06 456 Release effected with release code 00001
           W ME 080 Delivery date: next workday is 02.05.2007
           S 06 017 Standard PO created under the number 8201075606
       ENDMESSAGE E_MSG_2 (&TFILL = 0)
As you can see, 3 messages are found but the &TFILL variable is still 0.
I guess (but cannot test yet) I would manage to record those messages using SAPGUI command.
Is there anything wrong with my script?
My SAP_BASIS component is in version 620. I'm not using the ultimate version of eCATT (no WEBDYNPRO command, etc.). Could it be an explanation?
Thank you in advance,
Olivier

How to handle system errors in XI using BPM? please help!

Hi Experts,
I have a requirement where I have to handle system errors. For example when I am making RFC call using RFC adapter if the remote destination is down then I have create a understandable error message and store it in another SAP table.
How to handle it? I am using BPM. I can see that there is "Exceptions" in the send step. How to use this?
Thanks
Gopal

Hi Gopalkrishna,
In this case whenever you get Mapping Exception , you can raise an Exception with the help of BPM and you can send the status to the RFC. But with the help of BPM.
For a Simple case refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/4a773f12f14a18e10000000a114084/frameset.htm
If you want you can do it without a BPM
and throw an exception in case any of the values is missing:
have a look at this weblog on how to throw exceptions
in a nice way:
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
Also just go through <a href="/people/sap.user72/blog/2005/02/23/raising-exceptions-in-sap-xi-mapping Exceptions in SAP XI Mapping</a> and see if it helps you solve the problem.
Also go through these links:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7f2243d711d1893e0000e8323c4f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/f2bbc8142c11d3b93a0000e8353423/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/2166e6a91d11d188de0000e8216438/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/05/bb223905b61b0ae10000000a11402f/content.htm
Please do let know if it helped.
Regards,
Abhy

How to handle system exception in Sync communication without BPM? Help!

Hi Experts
   I have a Synchronous scenario in XI: webservice <------>RFC SAP R/3.
Webservice is making a sync call to RFC FM in SAP R/3 system.
   I want to handle system exception when SAP R/3 is down and send an email alert.
   Can I achieve this in graphical mapping without BPM? How? Kindly provide necessary steps/screenshots for the same.
   Are there any other alternatives for handling system exception apart from mapping and BPM?
Thanks
Gopal

Hi GopalKirshna,
      Yes,You can handle the Exception if at all you are using the RFC.You can achieve this without using BPM.
   Using Fault message you can catch the System Exception and even the primary role for Fault Message is to catch the RFC Exceptions.
   Please refer the Fault messages Notes to achieve this you will understand better.
Hope I am clear.
Please let me if you have any more queries regarding this..!
Thanks and Rewards,
Chandu.

How to handle error message during PAI?

Hi Experts,
Need help here.
In my dialog screen, I have a field which is typed 'QUAN'.
In entering different format , e.g. with non numeric value or a negative value, an error message appear and it does not process the MODULES inside the chain or FIELD MODULE ON REQUEST.
Does anyone knows how to handle this kind of error. I need to display into a separate screen the errors I encountered coz I'm creating a new RF transaction.
Points will be rewarded.
Thanks in advance.

Hai
in your case(RF case) it is other way...
yes you can use
field x_currency module check_currency.
in module check_currency.
you have to display errors in another screen say 200.
in that there will be 4 fields, all are display only fields.
X_MESSAGE-MSGV1 of type sy-msgv1
X_MESSAGE-MSGV2 of type sy-msgv2
X_MESSAGE-MSGV3 of type sy-msgv3
X_MESSAGE-MSGV4 of type sy-msgv4
you populate the messages with these fields and then display it in the screen.
method check_currency.
*--do all your checks here....
       if error
         clear x_message.
        x_message-msgv1 = 'Enter Valid Employee Number'(004).
        leave to screen 0200.
      endif.
    endif.
ENDMODULE.                 " VALIDATE_Currency
in screen 200 PBO you need to format the message
using the below logic.
       Method for formatting the message
method message_format.
    data : lt_text type table of tline,         "text table
           lx_text type tline.                  "work area
    refresh lt_text.
    clear lx_text.
    concatenate x_message-msgv1 x_message-msgv2 into lx_text-tdline
      separated by space.
    append lx_text to lt_text.
    clear lx_text.
    concatenate x_message-msgv3 x_message-msgv4 into lx_text-tdline
      separated by space.
    append lx_text to lt_text.
*- formatting the message
    call function 'FORMAT_TEXTLINES'
      exporting
        formatwidth = 20
      tables
        lines       = lt_text
      exceptions
        bound_error = 1
        others      = 2.
    clear: x_message.
*- transfer the message data to screen fields
    loop at lt_text into lx_text.
      if sy-tabix = 1.
        x_message-msgv1 = lx_text-tdline.
      elseif sy-tabix = 2.
        x_message-msgv2 = lx_text-tdline.
      elseif sy-tabix = 3.
        x_message-msgv3 = lx_text-tdline.
      elseif sy-tabix = 4.
        x_message-msgv4 = lx_text-tdline.
      else.
        exit.
      endif.
    endloop.
endmethod.                    "message_format
Regards
Vijay

How to handle parked message in BPM?

Hi,
I have a scenario that buyer as R3 send PO(same PO number) change idoc multiple times into bpm without receiving PO change confirmation(from seller, non R3) yet, I have a loop in bpm to handle this case, the loop checks the condition whether confirmation matches change request, if not, potential loop repeats. However, if I have multiple change request(same PO number) sent from R3 to BPM, my BPM waiting for my order confirmation, then if the first order confirmation comes into BPM matches with the first change request, then I exit the loop, but I still have several change requests parked at processXXXXX yet to be processed, does anybody came into similar situations? Any good suggestions or examples?
Thanks,
Maggie

Hi there,
I need to correlate ChangeConfirmation to ChangeRequest with PO number, this is for the purpose of ChangeRequest waiting for Confirmation for the same PO number. However, I don't know how to handle multiple changes come into BPM without confirmation yet, my current design is that I immediately enter a loop in BPM, with condition confirmation Info doese not match change info, thus the change request is bundled with bpm process, once the porcess is finished(response match change request), the queue of my other change requests(the parked ones) now got deleted, does anybody have any good suggestions in handling multiple change request(for same PO number) in bpm? Is there a way I can force bpm to handle one request one response, throw some error message if multiple changes comes together without response yet? Anybody had encountered similar issues?
Thanks,
Magge

How to handle error messages in BDC background mode

Hi experts,
I got one problem in BDC, We are uploading data throgh BDC program,that program is calling Standard Batch Input programs,
Now we got one requirement, i.e., In some special cases we have to send one message as a error message.I handled this in foreground but, how to handle this in background.

Hi,
if session is being used
automatically the log will begenereated in the sm35 transaction
but if call transaction is used
put all the error messages in the applicationserver using
open data set
and after the exectionof the program in the background
you have to run another progam which reads the data stroed inthe application server
that also with open data set only...
thanks & regards,
Venkatesh

How to handle xml message in proxy inbound processing?

Hi Experts,
I have a scenario that is SOAP Client====>XI===>ECC.
But i don't need to use the XI mapping,i skip mapping
in XI and use the generated proxy inbound processing.
Here is a message structure as below.
<commodityList>
■<commodity>
■■<detailNo>303303</detailNo>
■■<makerName>sony</makerName>
■■<ChargeInfoList>
■■■<productId>aaaa</productId>
■■■<name>bbb</name>
■■</ChargeInfoList>
■</commodity>
</commodityList>
When i sent the message without field entry of <productId>
and <name> i got the response in soap client as below.
<commodityList>
■<commodity>
■■<detailNo>303303</detailNo>
■■<makerName>sony</makerName>
■</commodity>
</commodityList>
The field tag <ChargeInfoList> doesn't display.
But i want it to display as below.
<commodityList>
■<commodity>
■■<detailNo>303303</detailNo>
■■<makerName>sony</makerName>
■■<ChargeInfoList>
■</commodity>
</commodityList>
In case of field entry is empty,how to let the response
contains tag?
As i know ,there is a CONTROLLER in proxy .
But i don't know if it is relevant to this
case and i don't know how to handle it.
Brand

Hi Mrudula,
As far as i know there are no content conversion methodology for HTTPS as the recevier adapter.
Also you can read through these links to confirm the same:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/sap_xi/sapximst30.htm
SAP NetWeaver - XML Communication Interface (CA-XML) [original link is broken]
Regards,
abhy
note: reward the helpful.

How to handle HTTP Message Format

Hi All,
i have the interface like XML File(Supplier)--XI--HTTP Message Post(SRM Server)
How to handle this case and how to handle the HTTP Message formats, what Adapters and all i need to use here
Regards
Vamsi

check susma's reply
File to HTTP
File to HTTP
/people/kausik.medavarapu/blog/2005/12/29/csv-file-lookup-with-http-request-and-response-in-xi

How to handle the messages.

Hi,
I am doing interactive report. In that how to handle the error meesages.
Regards
Srinu

HI
IF YOU WANT HANDLE THE ERROE MESSAGES
*& Report ZNNR_REPORT
REPORT ZNNR_REPORT NO STANDARD PAGE HEADING <b>MESSAGE-ID ZNNR</b> LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
        MATNR LIKE MARA-MATNR,
        WERKS LIKE MARC-WERKS,
        PSTAT LIKE MARC-PSTAT,
        EKGRP LIKE MARC-EKGRP,
       END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
        EBELN LIKE EKKO-EBELN,
        EBELP LIKE EKPO-EBELP,
        MATNR LIKE EKPO-MATNR,
        WERKS LIKE EKPO-WERKS,
        LGORT LIKE EKPO-LGORT,
       END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
******END OF SELECTION SCREEN DESIGN****************
*********INITIALIZATION OF SELECTION SCREEN ELEMENTS.*****
INITIALIZATION.
P_WERKS = '1000'.
S_EBELN-LOW = '4500016926'.
S_EBELN-OPTION = 'EQ'.
S_EBELN-SIGN = 'I'.
APPEND S_EBELN.
CLEAR S_EBELN.
************END OF INITIALIZATION***********************
***********SCREEN MODIFICATIONS*******************
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
    IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
********END OF SCREEN MODIFICATIONS*****************
***************SCREEN VALIDATIONS *****************
at selection-screen.
SELECT SINGLE *
           FROM EKKO
           INTO EKKO
           WHERE EBELN IN S_EBELN.
IF SY-SUBRC <> 0.
    SET CURSOR FIELD 'S_EBELN-LOW'.
    <b>MESSAGE E999 WITH TEXT-005</b>.
ENDIF.
********end of screen validation*****************
START-OF-SELECTION.
*set pf-status '100'.
IF R1 EQ 'X'.
    SELECT MATNR
           WERKS
           PSTAT
           EKGRP
       FROM MARC
       INTO TABLE IT_PLANT
       WHERE WERKS = P_WERKS.
    LOOP AT IT_PLANT.
      WRITE : SY-VLINE , 2 IT_PLANT-MATNR COLOR COL_KEY,
             21 SY-VLINE , 22 IT_PLANT-WERKS COLOR COL_KEY,
             27 SY-VLINE ,28 IT_PLANT-PSTAT COLOR COL_NORMAL,
             43 SY-VLINE ,44 IT_PLANT-EKGRP COLOR COL_NORMAL.
    ENDLOOP.
ENDIF.
IF R2 EQ 'X'.
    SELECT EBELN EBELP MATNR WERKS LGORT
           FROM EKPO
           INTO TABLE IT_PONO
           WHERE EBELN IN S_EBELN.
    LOOP AT IT_PONO.
      WRITE : SY-VLINE , 2 IT_PONO-EBELN COLOR COL_KEY,
             12 SY-VLINE , 13 IT_PONO-EBELP COLOR COL_KEY,
             18 SY-VLINE , 19 IT_PONO-MATNR COLOR COL_NORMAL,
             37 SY-VLINE , 38 IT_PONO-WERKS COLOR COL_NORMAL,
             44 SY-VLINE , 45 IT_PONO-LGORT COLOR COL_NORMAL, 49 SY-VLINE..
    ENDLOOP.
ENDIF.
TOP-OF-PAGE.
IF R1 EQ 'X'.
*ULINE AT /1(48).
    WRITE : SY-VLINE ,2 'MATERIAL NUMBER',
            21 SY-VLINE , 22 'PLANT',
            27 SY-VLINE , 28 'STATUS',
            43 SY-VLINE , 44 'GRUP', 48 SY-VLINE.
    ULINE AT /1(48).
ENDIF.
IF R2 EQ 'X'.
    WRITE : SY-VLINE , 2 'PO NUMBER',
           12 SY-VLINE, 13 'ITEM',
           18 SY-VLINE,19 'MATERIAL NUMBER',
           37 SY-VLINE, 38 'PLANT',
           44 SY-VLINE, 45 'GRUP',
           49 SY-VLINE.
    ULINE AT /1(50).
ENDIF.
END-OF-PAGE.
ULINE AT /1(50).
WRITE :/10 'PAGE NUMBER', SY-PAGNO.
WRITE THE CONDITION WHAT EVER YOU WANT TO CHECK AND IF THAT IS TRUE SY-SUBRC = 0 THEN NO MESS IF NE 0 THEN RAISE A ERROR MESSAGE LIKE ABOVE
REWARD IF USEFULL

Could not find any data to display - how to modify system message

Hi,
We created an exception report in the Web Application Designer.
If there are no exceptions (so there is no data to display) the following standard system message is shown:
Could not find any data to display. This might be due to the current selection of variable or filter values
We would however like to modify/remove this message.
How can this be done?
Thanks
Dave

Hi,
Please check the link:
/people/marc.bernard/blog/2008/10/10/how-to-filter-messages-created-by-bi-ip-planning-functions-and-sequences
Please check the Q&A section of above weblog which mentions about
function module RRMS_MESSAGE_HANDLING which could be helpful.
Please also refer to SDN thread:
Re: WAD - messages - message type
Regards,
Amit

How to handle different message types of EDIFACT in single input file.

Hi All,
Currently we have a requirement like we will be receiving the input with different messages in the same input file (eg: ORDERS and ORDRSP in the same file).
We have configured both the message types in the document definitions. One more thing is the versions of the messages are different.
When we pass the input we are getting the error.
The input looks like below,
UNB
UNG
UNH*ORDERS
UNT
UNE
UNG
UNH*ORDRSP
UNT
UNE
UNZ
Please assist us to overcome the error.
Thanks,
Ravindra.

Hi Prasanna,
Thanks for your reply.
I have created the agreements for both the messages still i'm getting the below error,
B2B-50037
B2B inbound message processing error
If i give the input as separate messages (i mean 2 input files). Its working fine.
Also let me know is there any configuration settings to handle multiple messages in a single input file.
Thanks,
Ravindra.

How to Create System messages in BW

I want to create a System message in BW.
Please let me know.
Thanks
Prasanna

Hi Prasanna,
Use the T- Code SM02.
hope this helps

How to handle different Unit of measures in ALV reports? Quantity/Price

Anyone knows how to handle different unit of measures for quantity or price in hierarchy ALV reports?

hi,
use the below fields:
Link to measurement unit
qfieldname (measurement unit field name)
only relevant for quantity columns with unit link.
Name of the internal output table field containing the measurement unit associated with the quantity field FIELDCAT-FIELDNAME.
The field in FIELDCAT-QFIELDNAME must have its own field catalog entry.
qtabname (internal measurement unit field output table)
value set: SPACE, output table field name
Name of the internal output table containing the FIELDCAT-QFIELDNAME field.
regards,
madhumitha

How to handle system messages neatly in ibot/dashboard reports

Similar Messages

Maybe you are looking for