How to handle the call transaction in method of a custom business object

Hello all,
There is a custom report " RPTCORAPP" for approving leaves . As per my requirement i have develop a copy of leave workflow and for approval process i have call "RPTCORAPP" in Custom method of custom object. i have made a transaction for this custom report for approving attendances. I am calling this method though call transaction statement within method.
Problem: while approving the attendance workitem is not disappearing from the portal. Problem is due to call transaction statement.
               once workitem come to the user, user click on it. control goes to the report, which display all the leave to approve on
               the portal.
               If after approving/ rejecting attendance user close the screen.workflow remain in the "process" status.Control wont come back after call transaction statement in the method.
             At the same time if user clicks on back button inspite of closing the screen. it is working fine. workitem disappears from the portal.
How to handle the scenarion. if after approving/rejecting, i want the control to come back to the NEXT STATEMENT after call transactionstatement in my method.
Please help it out........:)

Hi swami,
thanks for reply. but i am not using BDC in my method. iam just calling a custom transaction thriugh statement
Call transaction 'ZHR_APPROVE_CLINOUT'. This transaction directly run the report RPTCORAPP and display all the request.

Similar Messages

How to have the JTA transaction in ServiceEndpoint interface java method

Hi,
I have query how to have the JTA transaction in SEI(Service endpoint interface) generated by WSDL.
I have a MDMListener (using MDM API) which looks for a recordchange in MDM repository which needs to be send to PI7.1 via soap request.
1) I had imported the WSDL from ESR(PI) and generated outside-in proxy.
2) Created ejb3.0 stateless session bean using NWDS
3) Created web service client application by generating the WSDL again (by Generate client)
4)Added a method callPI()with Service and i set the context with endpointaddress property as the soap location of the sender agreement configured in PI7.1.
The damean thread listener(EventDispatcher) looks for MDM record change and it calls the method callPI() from ejbsession bean by lookup to transfer the record to PI7.1 system via webservices(web method). I hit the below error.
Exception com.sap.engine.services.ts.exceptions.BaseIllegalStateException: Status of ( SAP J2EE Engine JTA Transaction : 06223ffffffa20048fffffffe ) should be active, but it is STATUS_COMMITTED = 3.
at com.sap.engine.services.ts.jta.impl.TransactionImpl.registerSynchronizationWithoutStatusChecks(TransactionImpl.java:672)
at com.sap.engine.services.ts.jta.impl.TransactionImpl.registerSynchronization(TransactionImpl.java:641)
at com.sap.engine.services.ts.transaction.TxLevelSynchronizations.addSynchronization(TxLevelSynchronizations.java:118)
at com.sap.engine.services.ts.transaction.TxManagerImpl.registerSynchronization(TxManagerImpl.java:829)
at com.sap.transaction.TxManager.registerSynchronization(TxManager.java:303)
at com.sap.engine.messaging.runtime.j2ee.sapengine.SAPTransactionManager.registerSynchronization(SAPTransactionManager.java:126)
at com.sap.engine.messaging.impl.util.tx.TxController.<init>(TxController.java:83)
//Method in the ejb stateless session bean
@WebServiceRef (name="DistributeMasterDataService") DistributeMasterDataService service;
@RelMessagingNW05DTOperation(enableWSRM=true)
public void callPi(DistributeMasterDataRequestType req) {
port.distributeMasterDataOutA(req);// the distributeMasterDataOutA is the method available in SEI..Here is the issue on JTA
For the first time the message(req object)transmits to the PI successfully,but for the second call i hit this JTA Transaction :status should be active, but it is STATUS_COMMITTED = 3.
I tried chanding the transactionmanagement from container to bean.
@TransactionManagement(value=TransactionManagementType.BEAN)
@TransactionAttribute(value=TransactionAttributeType.REQUIRES_NEW)
I wanted to know how can i have the JTA transaction status in SEI(service enpoint interface)java method distributeMasterDataOutA.Since it is an interface i dont know what annotation can be used.
If its possible i can try this UserTransaction,
http://help.sap.com/saphelp_nw04/helpdata/de/f6/7a8df922db4ab79342b46c48dac7d0/content.htm
ut.begin() & ut.commit(),so that everytime this method is called it will treat as a new transaction..
Let me know if you need more details??,Any idea provided would be great.
Thanks
Sabarinathan

Hello everybody,
The issue resolved,we need to have the bean management transaction type and not the container.
and the transactionattribute value as Requires New
rgds
Sabarinathan
Edited by: Sabarinathan Selvaraj on May 12, 2009 2:17 PM

Oracle 11g: How to ensure the same transaction across several BPEL calls?

How to ensure transaction semantics across invocations of several BPEL services with a Database operations (Insert, update)? We are using transaction REQUIRED property in all of our BPELs. We are using webserive and JCA to access and modify the same row. Our code uses a combination of JCA, Spring bean, enity services, EJBs in these BPELs. The code can be more efficient, but, at this point, we have no option but to fix the transaction issue in this code. So, our question is how to ensure the same transaction context is used in all these BPELs to inser/update the same row? We have tried to set the GetUnitOfWork in the JCA Adapter but it did not provide any solution. Apaert from setting transaction in BPEL to REQUIRED and the JCA Adapter to use Unit of work, we are out of ideas. Any help is much apprecited. We are using Oracle SOA Suite 11g 11.1.1.5 version. --chary

Hi,
I can help you if you can describe the processes.
There can be some difficulties when you try to use the same transaction especially when you use many DB transactions & BPEL processes.
Using unit of work only ,might not be enough.
Thanks
Arik

How to get the current transaction variant ?

dear guru,
could you please tell me how to get the current transaction variant?
i tried the following method:
DATA l_tcvariant TYPE tcvariant.
CALL 'DY_GET_TX_VARIANT'
     ID 'VARIANT' FIELD l_tcvariant.
but it failed.
best regards.
zj

Try something like this
DATA: VARIANT LIKE SHDTVCIU-TCVARIANT.
CLEAR VARIANT.
CALL FUNCTION 'RS_HDSYS_GET_TC_VARIANT'
   IMPORTING
     TCVARIANT                     = VARIANT
*     FLAG_CLIENT_INDEPENDENT       =
*     RC                            =
*   TABLES
*     T_SCREEN_VARIANTS             =
*     T_INACTIVE_FUNCTIONS          =

How to handle the Timestamp datasource while migration

Hi All
" I tried searching the forum,but didnt get the relevant one,hence posting this question".
While migration from 4.7 to ECC in R/3 system,
how to handle the Timestamp datasources( especially FI like COPA and other ) while extarcting the data from source to BW during source system migration.Since we need to empty the delta queue and should make sure that there are no delta records exists in delta queue.
Like for sales datasources using LO,we will be executing the V3 jobs for execting the LUW's from LBWQ to RSA7? In the same way is there any particular way for this also.
Anyone whi knows abt this pls share your views
Regards
Shankar

Hello Shankar.
Before the upgrade (import of a queue), all extraction queues and open
update orders in all clients must be processed. The content of the setup
tables must be deleted. To avoid problems during the upgrade or to
correct them, carry out the following steps:
1. Call transaction SMQ1 and check whether all queues in all clients
(client = '', queue name 'MCEX') have been processed. To process the
queues, start the collective run report for each application in the
displayed clients. If you no longer need the data in the BW system,
deactivate the relevant extraction queues and DataSource in the LO
cockpit (transaction LBWE) and delete the queue entries in transaction
SMQ1.
2. If you use the V3 update that is not serialized (usually only for
application 03): Start collective run report RMBWV303. Then check the
update orders in transaction SM13. If there are incorrect update orders
in transaction SM13, correct the orders and then start the collective
run report again. If you no longer require the update orders, you can
delete them. There may be inconsistencies between tables VBMOD and
VBHDR. For further information about this, see Notes 652310 and 67014.
3. Before the upgrade, delete the contents of the setup tables. Execute
report RMCEX_SETUP_ENTRIES to find out which setup tables still contain
entries. You can use transaction LBWG to delete the contents of the
setup tables for all clients.
Unfortunately the check that the system carries out during the upgrade
or when you import a Support Package does not display all affected
applications. Therefore, Note 1083709 provides a check report that you
can use to determine all affected applications and tables or queues.
More detailed information please check these following notes:
1083709-Error when you import Support Packages
1081287-Data extraction orders block the upgrade process
I hope I can be helpful.
Thanks,
Walter Oliveira.

How to handle the selected record

how to handle the selected record when using alv classes

Hi,
use method : get_current_cell
CALL METHOD grid1->get_current_cell
                      IMPORTING es_row_id = ls_row_id
                                es_col_id = ls_col_id
                                 e_value = l_value.

Combination of call transaction & session methods

hi,
how to combine call transaction & session methods in a single transaction.
give me the exact steps to proceed with the above.

Hi Saritha,
Your question is not clear to me but I am assuming your queestion like this
"Providing choice for user for using either call transaction & Session method for uploading data"
When you generate the BDC (Batch Data Communication options define the processing mode for a batch input session) program with SHDB, you can remove a lot of unwanted fields by copying this customize abap include program. It allows you to execute the BDC program immediately without filling up those SAP generate fields. To run background, just run it as a background job.
Execute BDC immediately by replacing the include BDCRECX1
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
                 http://www.sap-img.com
***INCLUDE ZBDCRECX1.
When you generate the program using SHDB, you can replace it
with this if you want to execute it immediately without having
to process it using SM35.
During testing you can used the original include.
For example,
include zbdcrecx1.   "After test
include bdcrecx.     "Before test
Declare your internal table as RECORD
for programs doing a data transfer by creating a batch-input session
and
for programs doing a data transfer by CALL TRANSACTION USING
*SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS SESSION RADIOBUTTON GROUP CTU. "create session
SELECTION-SCREEN COMMENT 3(20) TEXT-S07 FOR FIELD SESSION.
selection-screen position 45.
PARAMETERS CTU RADIOBUTTON GROUP CTU DEFAULT 'X'. "call transaction
SELECTION-SCREEN COMMENT 48(20) TEXT-S08 FOR FIELD CTU.
*SELECTION-SCREEN END OF LINE.
PARAMETERS: SESSION NO-DISPLAY,
            CTU     NO-DISPLAY DEFAULT 'X'.
*SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) TEXT-S01 FOR FIELD GROUP.
selection-screen position 25.
PARAMETERS GROUP(12).                      "group name of session
SELECTION-SCREEN COMMENT 48(20) TEXT-S05 FOR FIELD CTUMODE.
selection-screen position 70.
PARAMETERS CTUMODE LIKE CTU_PARAMS-DISMODE DEFAULT 'N'.
                                     "A: show all dynpros
                                     "E: show dynpro on error only
                                     "N: do not display dynpro
*SELECTION-SCREEN END OF LINE.
PARAMETERS: GROUP(12) NO-DISPLAY,
            CTUMODE   NO-DISPLAY DEFAULT 'N'.
*SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) TEXT-S02 FOR FIELD USER.
selection-screen position 25.
PARAMETERS: USER(12) DEFAULT SY-UNAME.    "user for session in batch
SELECTION-SCREEN COMMENT 48(20) TEXT-S06 FOR FIELD CUPDATE.
selection-screen position 70.
PARAMETERS CUPDATE LIKE CTU_PARAMS-UPDMODE DEFAULT 'L'.
                                     "S: synchronously
                                     "A: asynchronously
                                     "L: local
*SELECTION-SCREEN END OF LINE.
PARAMETERS: USER(12) NO-DISPLAY DEFAULT SY-UNAME,
            CUPDATE LIKE CTU_PARAMS-UPDMODE DEFAULT 'L' NO-DISPLAY.
*SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) TEXT-S03 FOR FIELD KEEP.
selection-screen position 25.
PARAMETERS: KEEP AS CHECKBOX.       "' ' = delete session if finished
                                     "'X' = keep   session if finished
SELECTION-SCREEN COMMENT 48(20) TEXT-S09 FOR FIELD E_GROUP.
selection-screen position 70.
parameters E_GROUP(12).             "group name of error-session
*SELECTION-SCREEN END OF LINE.
PARAMETERS: KEEP        NO-DISPLAY,
            E_GROUP(12) NO-DISPLAY.
*SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) TEXT-S04 FOR FIELD HOLDDATE.
selection-screen position 25.
PARAMETERS: HOLDDATE LIKE SY-DATUM.
SELECTION-SCREEN COMMENT 51(17) TEXT-S02 FOR FIELD E_USER.
selection-screen position 70.
PARAMETERS: E_USER(12) DEFAULT SY-UNAME.    "user for error-session
*SELECTION-SCREEN END OF LINE.
PARAMETERS: HOLDDATE LIKE SY-DATUM NO-DISPLAY,
           E_USER(12) DEFAULT SY-UNAME NO-DISPLAY.
*SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) TEXT-S03 FOR FIELD E_KEEP.
selection-screen position 70.
PARAMETERS: E_KEEP AS CHECKBOX.     "' ' = delete session if finished
                                     "'X' = keep   session if finished
*SELECTION-SCREEN END OF LINE.
PARAMETERS: E_KEEP NO-DISPLAY.
*SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) TEXT-S04 FOR FIELD E_HDATE.
selection-screen position 70.
PARAMETERS: E_HDATE LIKE SY-DATUM.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN SKIP.
PARAMETERS: E_HDATE LIKE SY-DATUM NO-DISPLAY.
*SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) TEXT-S10 FOR FIELD NODATA.
PARAMETERS: NODATA DEFAULT '/' LOWER CASE.          "nodata
*SELECTION-SCREEN END OF LINE.
PARAMETERS: NODATA DEFAULT '/' LOWER CASE NO-DISPLAY.
*SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) FOR FIELD SMALLLOG.
PARAMETERS: SMALLLOG as checkbox. "' ' = log all transactions
                                    "'X' = no transaction logging
*SELECTION-SCREEN END OF LINE.
PARAMETERS: SMALLLOG NO-DISPLAY.
data definition
      Batchinputdata of single transaction
DATA:   BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
      messages of call transaction
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
      error session opened (' ' or 'X')
DATA:   E_GROUP_OPENED.
      message texts
TABLES: T100.
at selection screen                                                *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
     GROUP = SPACE OR USER = SPACE.
    MESSAGE E613(MS).
ENDIF.
open dataset                                                       *
FORM OPEN_DATASET USING P_DATASET.
OPEN DATASET P_DATASET IN TEXT MODE.
IF SY-SUBRC <> 0.
    WRITE: / TEXT-E00, SY-SUBRC.
    STOP.
ENDIF.
ENDFORM.
close dataset                                                      *
FORM CLOSE_DATASET USING P_DATASET.
CLOSE DATASET P_DATASET.
ENDFORM.
create batchinput session                                          *
(not for call transaction using...)                                *
FORM OPEN_GROUP.
IF SESSION = 'X'.
    SKIP.
    WRITE: /(20) 'Create group'(I01), GROUP.
    SKIP.
open batchinput group
    CALL FUNCTION 'BDC_OPEN_GROUP'
         EXPORTING CLIENT   = SY-MANDT
                    GROUP    = GROUP
                    USER     = USER
                    KEEP     = KEEP
                    HOLDDATE = HOLDDATE.
    WRITE: /(30) 'BDC_OPEN_GROUP'(I02),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ENDIF.
ENDFORM.
end batchinput session                                             *
(call transaction using...: error session)                         *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
close batchinput group
    CALL FUNCTION 'BDC_CLOSE_GROUP'.
    WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ELSE.
    IF E_GROUP_OPENED = 'X'.
      CALL FUNCTION 'BDC_CLOSE_GROUP'.
      WRITE: /.
      WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
    ENDIF.
ENDIF.
ENDFORM.
       Start new transaction according to parameters                 *
FORM BDC_TRANSACTION USING TCODE.
DATA: L_MSTRING(480).
DATA: L_SUBRC LIKE SY-SUBRC.
batch input session
IF SESSION = 'X'.
    CALL FUNCTION 'BDC_INSERT'
         EXPORTING TCODE     = TCODE
         TABLES    DYNPROTAB = BDCDATA.
    IF SMALLLOG <> 'X'.
      WRITE: / 'BDC_INSERT'(I03),
               TCODE,
               'returncode:'(I05),
               SY-SUBRC,
               'RECORD:',
               SY-INDEX.
    ENDIF.
call transaction using
ELSE.
    REFRESH MESSTAB.
    CALL TRANSACTION TCODE USING BDCDATA
                     MODE   CTUMODE
                     UPDATE CUPDATE
                     MESSAGES INTO MESSTAB.
    L_SUBRC = SY-SUBRC.
    IF SMALLLOG <> 'X'.
     WRITE: / 'CALL_TRANSACTION',
              TCODE,
              'returncode:'(I05),
              L_SUBRC,
              'RECORD:',
              SY-INDEX.
      IF SY-SUBRC = 0.
         FORMAT COLOR OFF.
         WRITE:/ 'Successfully Process ', MESSTAB, RECORD.
      ELSE.
         FORMAT COLOR COL_NEGATIVE.
         WRITE:/ 'Failed Process ', MESSTAB, RECORD.
      ENDIF.
      LOOP AT MESSTAB.
        SELECT SINGLE * FROM T100 WHERE SPRSL = MESSTAB-MSGSPRA
                                  AND   ARBGB = MESSTAB-MSGID
                                  AND   MSGNR = MESSTAB-MSGNR.
        IF SY-SUBRC = 0.
          L_MSTRING = T100-TEXT.
          IF L_MSTRING CS '&1'.
            REPLACE '&1' WITH MESSTAB-MSGV1 INTO L_MSTRING.
            REPLACE '&2' WITH MESSTAB-MSGV2 INTO L_MSTRING.
            REPLACE '&3' WITH MESSTAB-MSGV3 INTO L_MSTRING.
            REPLACE '&4' WITH MESSTAB-MSGV4 INTO L_MSTRING.
          ELSE.
            REPLACE '&' WITH MESSTAB-MSGV1 INTO L_MSTRING.
            REPLACE '&' WITH MESSTAB-MSGV2 INTO L_MSTRING.
            REPLACE '&' WITH MESSTAB-MSGV3 INTO L_MSTRING.
            REPLACE '&' WITH MESSTAB-MSGV4 INTO L_MSTRING.
          ENDIF.
          CONDENSE L_MSTRING.
          WRITE: / MESSTAB-MSGTYP, L_MSTRING(250).
        ELSE.
          WRITE: / MESSTAB.
        ENDIF.
      ENDLOOP.
      SKIP.
    ENDIF.
Erzeugen fehlermappe ************************************************
    IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
      IF E_GROUP_OPENED = ' '.
        CALL FUNCTION 'BDC_OPEN_GROUP'
             EXPORTING CLIENT   = SY-MANDT
                        GROUP    = E_GROUP
                        USER     = E_USER
                        KEEP     = E_KEEP
                        HOLDDATE = E_HDATE.
         E_GROUP_OPENED = 'X'.
      ENDIF.
      CALL FUNCTION 'BDC_INSERT'
           EXPORTING TCODE     = TCODE
           TABLES    DYNPROTAB = BDCDATA.
    ENDIF.
ENDIF.
REFRESH BDCDATA.
ENDFORM.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.

In BADi , How to pass the values between two Method

Hi Experts,
We have two methods in BADis. How to pass the value between two Methods. Can you guys explain me out with one example...
Thanks & Regards,
Sivakumar S

Hi Sivakumar!
Create a function group.
Define global data (there is a similiar menu point to jump to the top include).
Create one or two function modules, with which you can read and write the global data.
In your BADI methods you can access the global data with help of your function modules. It will stay in memory through the whole transaction.
Regards,
Christian

How to handle the stale cheques in EBRS

Dear Guru's
Can any bady explain me how to handle the stale cheque cases in EBRS, and what are the possible transaction codes using for that.
Any help can be greatly appreciated.
Regards,
kishroe

Hi
any bady know about this plz respond.
Thanks in Advance
kishore

How to handle the extended vo in the extended controller

Hi,
I want to know how to handle the extended vo attributes in the extended controller.
I extended CompetenceElementsVO as 'CompetenceElementsEx' with 2 transient attributes called col1 and col2.
Here i want to pass value according based on some condition. for this i want to know how to handle these attributes.
I tried by using the extended vo name in the controller, if i use means then it is throwing error after the extended controller is implemented.
Same time if i try to refer this attributes from the original vo definition, jdev itself showing error.
please tell me how to handle this?
Thanks in advance,
SAN

Hi San,
You have to extend the controller where your region is associated with,
And in that controller you get the AM(if there is more than one AM and your VO is associated with a child AM, first you have to get your required AM) and then
get the ViewObject(standard).
Then you should be able to get your newly added attributes.
Please find the below sample code to get the AM handle and VO from there, update the code according to your requirement,
     Get all the VOs under the Root AM
     writeLog(pageContext, "Room AM"+ pageContext.getRootApplicationModule());
String[] rootViewNames = pageContext.getRootApplicationModule().getViewObjectNames();
/* writeLog(pageContext," Length of the VOs from Rootm AM "+rootViewNames.length);
for (int j =0 ;j<rootViewNames.length ;j++ )
writeLog(pageContext,j +" Value "+rootViewNames[j]);
     // Get requested AM from Root am
public OAApplicationModule getRequestedAM(OAPageContext pageContext, String requestedAMName)
writeLog(pageContext,"Requested AM called to check the AM "+requestedAMName );
String amName = "";
String objectivesAMName = requestedAMName;//"ObjectivesAM";
String nestedAMArray[] = pageContext.getRootApplicationModule().getApplicationModuleNames();
pageContext.writeDiagnostics(this,"Root AM=>"+pageContext.getRootApplicationModule().getName() + " Child AMs=>"+ nestedAMArray.length,1);
OAApplicationModule currentAM = null;
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule();
for(int i = 0; i < nestedAMArray.length; i++)
amName = nestedAMArray;
pageContext.writeDiagnostics(this,"Nested AM Name=>"+amName + "and amName.indexOf(objectivesAMName) "+amName.indexOf(objectivesAMName),1);
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule().findApplicationModule(amName);
                    //Get the view names
               String[] viewNames = currentAM.getViewObjectNames();
for (int i =0 ;i<viewNames.length ;i++ )
writeLog(pageContext,i +" Value "+viewNames[i]);
if(!(amName.indexOf(objectivesAMName)==-1))
pageContext.writeDiagnostics(this,"Found Handle to My Nested AM " + amName ,1);
break;
return currentAM;
Get the VO from the AM
OAViewObject objAssessmentVO = (OAViewObject)yourAM.findViewObject("yourVO");
Thanks.
With Regards,
Kali.
OSSi.

How to update the FB01L transaction using the FM bapi_acc_document_post

Hi All,
How to update the FB01L transaction using the bapi_acc_document_post but there is no ledger group field in the bapi function module.
Please help me how to do it.

hi,
use batch input method for the same.
check this.
[https://forums.sdn.sap.com/click.jspa?searchID=19107237&messageID=884744]

How to handle the java.policy file ?

Can somebody tell me how to handle the java.policy file?
I always get java.net.SocketExceptions and java.security.AccessControlExceptions while connecting to an appserver from an applet.
What do I have to write in the java.policy file, where do I have to place it and do I have to call it in some way form my applet?
Thanks in advance.
don call

The java.policy file goes in your jre installation directory in .../jre/lib/security (there should be one there already).
I used it to allow otherwise restricted permissions for an applet using javax.comm. Add something like the following to the file:
grant codeBase "URL:http://yourDomainName/rootDirectoryOfYourApp/*" {
permission java.security.AllPermission;
This will give the applet downloaded from your site all permissions. You might want to give only certain permissions, I don't know.
Teri

How to handle screen resolution in session method

how to handle screen resolution in session method without bdc_insert .

Hello,
Why do need that for? Is it to add rows on a table control??
If it does, add new rows by using the add button instead of adding into the table control directly to each row.
Bye
Gabriel.

How to divide the CRM transaction data by company cord?

How to divide the CRM transaction data by company cord?
CRM transaction have not company cord, so how to divide the data on BI report by company cord?
Do I have to get the sales organization from customer master?
Some transactions have not master data like lead. I want to know your experience.

Hi
This is self reply.
I should use the sales organization instead of company cord.
But some business like lead from contact from customer can not separate the company, in situation one call center for multiple companies.
We should use another field to divide the company. Ex. Product, campaign, etc.
If someone knows better way to solve this issue, let me know the reply.
Regard
u1

How we can use call transaction xd03 in alv report

hey guys i want now that how we can use call transaction xd03 in alv report by using various tables in report or coding.
can you tell me about that by the way of coding so that it can be easy for me to understand and help ful to make report by using alv report with many tables. so please send me .
Moderator message: it seems to be XD03 day today, please search for available information/documentation/previous discussions.
Edited by: Thomas Zloch on Nov 25, 2011 1:24 PM

Where?
Max

How to handle the call transaction in method of a custom business object

Similar Messages

Maybe you are looking for