How to handle the Timestamp datasource while migration

Hi All
" I tried searching the forum,but didnt get the relevant one,hence posting this question".
While migration from 4.7 to ECC in R/3 system,
how to handle the Timestamp datasources( especially FI like COPA and other ) while extarcting the data from source to BW during source system migration.Since we need to empty the delta queue and should make sure that there are no delta records exists in delta queue.
Like for sales datasources using LO,we will be executing the V3 jobs for execting the LUW's from LBWQ to RSA7? In the same way is there any particular way for this also.
Anyone whi knows abt this pls share your views
Regards
Shankar

Hello Shankar.
Before the upgrade (import of a queue), all extraction queues and open
update orders in all clients must be processed. The content of the setup
tables must be deleted. To avoid problems during the upgrade or to
correct them, carry out the following steps:
1. Call transaction SMQ1 and check whether all queues in all clients
(client = '', queue name 'MCEX') have been processed. To process the
queues, start the collective run report for each application in the
displayed clients. If you no longer need the data in the BW system,
deactivate the relevant extraction queues and DataSource in the LO
cockpit (transaction LBWE) and delete the queue entries in transaction
SMQ1.
2. If you use the V3 update that is not serialized (usually only for
application 03): Start collective run report RMBWV303. Then check the
update orders in transaction SM13. If there are incorrect update orders
in transaction SM13, correct the orders and then start the collective
run report again. If you no longer require the update orders, you can
delete them. There may be inconsistencies between tables VBMOD and
VBHDR. For further information about this, see Notes 652310 and 67014.
3. Before the upgrade, delete the contents of the setup tables. Execute
report RMCEX_SETUP_ENTRIES to find out which setup tables still contain
entries. You can use transaction LBWG to delete the contents of the
setup tables for all clients.
Unfortunately the check that the system carries out during the upgrade
or when you import a Support Package does not display all affected
applications. Therefore, Note 1083709 provides a check report that you
can use to determine all affected applications and tables or queues.
More detailed information please check these following notes:
1083709-Error when you import Support Packages
1081287-Data extraction orders block the upgrade process
I hope I can be helpful.
Thanks,
Walter Oliveira.

Similar Messages

How to handle the table control While working with LSMW?

How to handle the table control While working with LSMW?

its possible in lsmw,
Hi,
LSMW will have a Indicator for headr and itam, i do not remember the correct field, but it will have an indicator, check the fields, there will be a single charecter lenght field, that should be the indicator, and using that we can write the logic.
check that single charecter field, it that is X that means the header record is processed, and do the items.
and, this is another way, try this out also
YOu can do this in "Define Source Structures" step,
the HEADER is defined first,
then the DETAIL below the HEADER.
add the fields to the structures.
Both should have some common key field
Please take care that the name of the common field is the same.
Once you do this it is linked. The you have a header and item corresponding to that header. then run the LSMW as you would.
Thanks

How to handle the bad record while using bulk collect with limit.

Hi
How to handle the Bad record as part of the insertion/updation to avoid the transaction.
Example:
I am inserting into table with LIMIT of 1000 records and i've got error at 588th record.
i want to commit the transaction with 588 inserted record in table and log the error into
error logging table then i've to continue with transaction with 560th record.
Can anyone suggest me in this case.
Regards,
yuva

>
How to handle the Bad record as part of the insertion/updation to avoid the transaction.
>
Use the SAVE EXCEPTIONS clause of the FORALL if you are doing bulk inserts.
See SAVE EXCEPTIONS in the PL/SQL Language doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/tuning.htm
And then see Example 12-9 Bulk Operation that continues despite exceptions
>
Example 12-9 Bulk Operation that Continues Despite Exceptions
-- Temporary table for this example:
CREATE TABLE emp_temp AS SELECT * FROM employees;
DECLARE
TYPE empid_tab IS TABLE OF employees.employee_id%TYPE;
emp_sr empid_tab;
-- Exception handler for ORA-24381:
errors NUMBER;
dml_errors EXCEPTION;
PRAGMA EXCEPTION_INIT(dml_errors, -24381);
BEGIN
SELECT employee_id
BULK COLLECT INTO emp_sr FROM emp_temp
WHERE hire_date < '30-DEC-94';
-- Add '_SR' to job_id of most senior employees:
FORALL i IN emp_sr.FIRST..emp_sr.LAST SAVE EXCEPTIONS
UPDATE emp_temp SET job_id = job_id || '_SR'
WHERE emp_sr(i) = emp_temp.employee_id;
-- If errors occurred during FORALL SAVE EXCEPTIONS,
-- a single exception is raised when the statement completes.
EXCEPTION
-- Figure out what failed and why
WHEN dml_errors THEN
errors := SQL%BULK_EXCEPTIONS.COUNT;
DBMS_OUTPUT.PUT_LINE
('Number of statements that failed: ' || errors);
FOR i IN 1..errors LOOP
DBMS_OUTPUT.PUT_LINE('Error #' || i || ' occurred during '||
'iteration #' || SQL%BULK_EXCEPTIONS(i).ERROR_INDEX);
DBMS_OUTPUT.PUT_LINE('Error message is ' ||
SQLERRM(-SQL%BULK_EXCEPTIONS(i).ERROR_CODE));
END LOOP;
END;
DROP TABLE emp_temp;

How to resolve the encoding problem while migration from informix9.4

When I migrate the informix9.4 database, there occur a error while migrate the data from informix to oracle.
Because the source tables has a column which type is "vchar", the some row's data length more the 4000, so migration workbench convert this column type from "vchar" to "clob" automaticly. But when the worbench has created the oracle model, and then migrate the data, there occured this error:
java.io.UnsupportedEncodingException: ISO2022CN_GB
java.sql.SQLException: index miss IN or OUT param:: 9
+     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)+
+     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)+
+     at oracle.jdbc.driver.OraclePreparedStatement.processCompletedBindRow(OraclePreparedStatement.java:1536)+
+     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2900)+
+     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:2996)+
+     at oracle.mtg.migrationServer.LoadTableData._migrateTableData(LoadTableData.java:1473)+
+     at oracle.mtg.migrationServer.LoadTableData.run(LoadTableData.java:326)+
+     at oracle.mtg.migration.WorkerThread.run(Worker.java:268)+
The encode in the source informix database is "zh_CN.gbk", and the encode in the destination database is "zh_CN.gbk", why this prompt the convert error?
Another information is that excluding this table, other tables can migrated success.
So, I guess this problem must has association with the type conversation which from "vchar" to "clob", can anyone help me with this, Thanks.

Hello,
well, the limit of 4000 is clear. From the Oracle® Migration Workbench Reference Guide for Informix Dynamic Server Migrations:
VARCHAR(m,r)
The Informix Dynamic Server VARCHAR data type stores varying length single-byte and multibyte character strings of letters, numbers. and symbols. The maximum size of this column is m, that can range from 1 to 255. The minimum reserved space is r. This is optional and defaults to 0 if not specified. The minimum reserved space can range from 0 to 255.
The comparable Oracle data type is VARCHAR2(n) that also stores variable-length character strings. An Oracle VARCHAR2(n), however, can have a maximum string length of between 1 and 4000 specified for n.
Specifying a minimum reserved space is useful if the data in a row is initially small but is expected to grow at a later date. If this is the case then, when migrating Informix Dynamic Server tables that contain VARCHAR columns consider increasing the PCTFREE value in the storage clause for these tables in the Oracle database. If this column is used in an index, then the PCTFREE values for the corresponding index storage should also be considered. For indexes based on VARCHAR columns, Informix Dynamic Server allocates the maximum storage.
So it is not surprising that the workbench is converting a VARCHAR with a length of more than 4000 to a CLOB.
But that does not explain the encoding exception. This might be a problem of the Informix JDBC driver.
Is the Informix JDBC Driver Programmer's Guide helpful for you: http://publibfi.boulder.ibm.com/epubs/pdf/6435.pdf
Can you reproduce the problem with a Java program against your Informix database using your Informix JDBC driver?
Which version of Informix JDBC driver are you using?
Best regards
Wolfgang

How to improve the load performance while using Datasources for the Invoice

HI All,
How to improve the load performance while using Datasources for the Invoice . Actually my invoice load (Appx. 0.4 M records) is taking very long time nearly ~16 to 18 hrs to update data from R/3 to 0ASA_DS01.
If I load through flat file it will load with in ~20 Min for the same amount of data.
Please suggest how to improve load performance.
PS: I have done the Inpo package settings as per the OSS note.
Regads
Srininivasarao.Namburi.

Hi Srinivas,
Please refer to my blog posting [/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction|/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction] which gives the details about the package size setting for extractors. I am sure that will be helpful in your case.
Thanks,
Divyesh
Edited by: Divyesh Jain on Jul 20, 2010 8:47 PM

How can we modify the distination url while migrate the personalization

Hi All,
I got the requirement to create a link in iSupplier home page. I have created the link using oa framework personalization and set the destination URL with the third party's test instance URL. It is available in test instance and the third party url is also the test instance url . I have to move this personalization to production. In production the same link has to open the third party's prod instance only. But i am little bit confused, how can we modify the detsination url in the personalizaed the document.
Please suggest me if there is any generic way of modifying the link url while migrating the personalization from one instance to another instance.
Thanks in Advance..
Regards,
Purushoth

Hi,
---Its nt possible via personalization go for co extension
Im not sure but pls try with below approach.
---In co get the webBean of OALinkBean and setDestination URL in code.
if(Prod)
setdestinationURL("");
if(Testing)
setDestinationURL("");
Regards
Meher Irk

How to handle the different pricing conditions changes in BI.

Dear Friends
can any one send me Regarding
How to handle the different pricing conditions changes in BI.
Thanks & Regards
Ramana

Hi,
Take a look at the 0sd_o06 ODS and 2lis_13_vdkon datasource for sales billing conditions.
http://help.sap.com/saphelp_nw70/helpdata/EN/36/8188408bc0bb4de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/7f/0f8c4037fba62be10000000a1550b0/frameset.htm
Regards.

How to handle the call transaction in method of a custom business object

Hello all,
There is a custom report " RPTCORAPP" for approving leaves . As per my requirement i have develop a copy of leave workflow and for approval process i have call "RPTCORAPP" in Custom method of custom object. i have made a transaction for this custom report for approving attendances. I am calling this method though call transaction statement within method.
Problem: while approving the attendance workitem is not disappearing from the portal. Problem is due to call transaction statement.
               once workitem come to the user, user click on it. control goes to the report, which display all the leave to approve on
               the portal.
               If after approving/ rejecting attendance user close the screen.workflow remain in the "process" status.Control wont come back after call transaction statement in the method.
             At the same time if user clicks on back button inspite of closing the screen. it is working fine. workitem disappears from the portal.
How to handle the scenarion. if after approving/rejecting, i want the control to come back to the NEXT STATEMENT after call transactionstatement in my method.
Please help it out........:)

Hi swami,
thanks for reply. but i am not using BDC in my method. iam just calling a custom transaction thriugh statement
Call transaction 'ZHR_APPROVE_CLINOUT'. This transaction directly run the report RPTCORAPP and display all the request.

How to handle the java.policy file ?

Can somebody tell me how to handle the java.policy file?
I always get java.net.SocketExceptions and java.security.AccessControlExceptions while connecting to an appserver from an applet.
What do I have to write in the java.policy file, where do I have to place it and do I have to call it in some way form my applet?
Thanks in advance.
don call

The java.policy file goes in your jre installation directory in .../jre/lib/security (there should be one there already).
I used it to allow otherwise restricted permissions for an applet using javax.comm. Add something like the following to the file:
grant codeBase "URL:http://yourDomainName/rootDirectoryOfYourApp/*" {
permission java.security.AllPermission;
This will give the applet downloaded from your site all permissions. You might want to give only certain permissions, I don't know.
Teri

How to handle the situation to forward work item manually?

Hi All,
In my workflow -
For agent determination I have some custom logic to determine agents. If custom logic donu2019t return any agents then the requirement is work item needs to send back to workflow initiator.
My issue-
When no agent determines
1.Work item needs to send back to workflow initiator - and he should not able to Approve or Reject work item - He Can only forward work item to any other person manually (he determines to whom it should forward).
2. After manually forwarding the work item it is normal process 2 level of approval from that point .
Please let me know for the first item how to handle the situation?
I have developed 2 section - one goes with regular agent determination -
and the other one when no agent determines then I am assigning back to workflow initiator. Now I want to handle that - initiator should not accept or reject and he can only forward to someone. How to develop this?
Please let me know your thoughts.
Thanks in advance.
Rajesh,

Hi All,
Thanks for the answers.. sorry for late replay.. requirement was not confirmed.
1. As I described in my question
After my custom conditions.. I have to send workitem back to initator ( Now initiator forwards the work item to someone else ( need to restrict users based on role - )..
While doing this process initiator should not have access to approve or reject he should only forward the workitem.
After forwarding the work item -this person should have approve or reject options.
My question is not answered..
1. As Vijay told..
Dont give Approve and Reject Options and in Description u specify like
If I dont provide approve/reject when I am sending the work item to initiator - After initiator forwarding this work item - how do we the other approver will get options Approve and Reject?
2. AS -surjith kumar
If your Using the Rule or Expression you have to restrict via coding - This will solve one of my problem -
How I can restict users with role based?
My problem is not solved.. Initiator should not have access to approve but He should only forward the work item...
Please let me know...

How to handle the OK button of the parameters prompt of a crystal report

Hi,
how to handle the OK button of the parameters prompt of a crystal report in vba.NET?
I want to use the parameter prompt from the crystal report itself and I want to know when the report is ready. I need to export programatically by sending email to a list of employees after the parameters has been set. The emails I send depends on the results of the report.
Im using a CrystalReportViewer control in VS2010 and Crystal Report for VS2010 v13.0.1.220.

Right. But the parameter screen is driven by the viewer. Unless you create your own parameter screen and pass the parameters to the report via code.
Another thing I am not sure about:
"Then by code I want to read all the employees id from the report and send email to them with specified pages of the report. (1 page per employee)"
How do you plan on reading the employee ID from the report? I am not aware of any API that will read a value in a report so that you can then decide what page to send to whom.
I think you're approaching this kinda backwards. A question to ask is; can you do what you are trying to do in code in the CR designer? If not, using APIs will not work either. I suspect your approach should be a report that uses an employee filter. Run the report for employee x, get the report populated with the data for that employee and email it. Repeat for employee x1, employee x2, etc.
- Ludek

How to handle the control records in case of file to idoc scenario.

Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.

Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri

How to handle the stale cheques in EBRS

Dear Guru's
Can any bady explain me how to handle the stale cheque cases in EBRS, and what are the possible transaction codes using for that.
Any help can be greatly appreciated.
Regards,
kishroe

Hi
any bady know about this plz respond.
Thanks in Advance
kishore

How to handle the extended vo in the extended controller

Hi,
I want to know how to handle the extended vo attributes in the extended controller.
I extended CompetenceElementsVO as 'CompetenceElementsEx' with 2 transient attributes called col1 and col2.
Here i want to pass value according based on some condition. for this i want to know how to handle these attributes.
I tried by using the extended vo name in the controller, if i use means then it is throwing error after the extended controller is implemented.
Same time if i try to refer this attributes from the original vo definition, jdev itself showing error.
please tell me how to handle this?
Thanks in advance,
SAN

Hi San,
You have to extend the controller where your region is associated with,
And in that controller you get the AM(if there is more than one AM and your VO is associated with a child AM, first you have to get your required AM) and then
get the ViewObject(standard).
Then you should be able to get your newly added attributes.
Please find the below sample code to get the AM handle and VO from there, update the code according to your requirement,
     Get all the VOs under the Root AM
     writeLog(pageContext, "Room AM"+ pageContext.getRootApplicationModule());
String[] rootViewNames = pageContext.getRootApplicationModule().getViewObjectNames();
/* writeLog(pageContext," Length of the VOs from Rootm AM "+rootViewNames.length);
for (int j =0 ;j<rootViewNames.length ;j++ )
writeLog(pageContext,j +" Value "+rootViewNames[j]);
     // Get requested AM from Root am
public OAApplicationModule getRequestedAM(OAPageContext pageContext, String requestedAMName)
writeLog(pageContext,"Requested AM called to check the AM "+requestedAMName );
String amName = "";
String objectivesAMName = requestedAMName;//"ObjectivesAM";
String nestedAMArray[] = pageContext.getRootApplicationModule().getApplicationModuleNames();
pageContext.writeDiagnostics(this,"Root AM=>"+pageContext.getRootApplicationModule().getName() + " Child AMs=>"+ nestedAMArray.length,1);
OAApplicationModule currentAM = null;
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule();
for(int i = 0; i < nestedAMArray.length; i++)
amName = nestedAMArray;
pageContext.writeDiagnostics(this,"Nested AM Name=>"+amName + "and amName.indexOf(objectivesAMName) "+amName.indexOf(objectivesAMName),1);
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule().findApplicationModule(amName);
                    //Get the view names
               String[] viewNames = currentAM.getViewObjectNames();
for (int i =0 ;i<viewNames.length ;i++ )
writeLog(pageContext,i +" Value "+viewNames[i]);
if(!(amName.indexOf(objectivesAMName)==-1))
pageContext.writeDiagnostics(this,"Found Handle to My Nested AM " + amName ,1);
break;
return currentAM;
Get the VO from the AM
OAViewObject objAssessmentVO = (OAViewObject)yourAM.findViewObject("yourVO");
Thanks.
With Regards,
Kali.
OSSi.

How to handle the table control in bapi?

how to handle the table control in bapi? example va01.
i pass multiple line item what is the procedure?
header detail same .
eample ship to party
sale to party.
line item mulptiple
10 mat1
2o mat2
30 mat3.
in bapi we can pass sinle line item.
any way to handle multiple line item pass through the bapi.
Message was edited by:
Karthikeyan Pandurangan

BAPI is not going through the screen flow logic so you need not to worry about the table control. Just check in the BAPi there must be one table parameter for line items just pass one int table with your data to that table parameter it will automatically update the tables.
Regards
shiba dutta

How to handle the Timestamp datasource while migration

Similar Messages

Maybe you are looking for