How to handle Third party management WRT to Lease out in SAP - REFX

Dear Friends,
I would like to have an advice on Third party management of a property WRT to (SAP REFX) Lease out.
Example: Under a company code – 1000, I have some 8000 number of properties which is my own and I am doing Lease out with the same.
Out of 8000 properties I have sold some 500 properties to a different company code XYZ, up to here its fine.
Now XYZ Company is asking me to lease out the 500 properties through my company code ( 1000) only and for that I will get the commission of some percentage, i need to bring this to REFX system.
As I have three deferent Opinions in my mind to handle this scenario as below :
1. Usage of SAP REFX (Standard) third party management option
2. Creating a dummy company code and lease out the properties.
3. In the existing co code itself, I will lease in the properties from XYZ company code & then I will have one more new contract type to lease out and creating a new condition type as Brokerage charges…etc.
Kindly suggest me the better option to make it user friendly solution.
Kindly treat this as a priority issue.
Thanks & Best Regards,
Subbarao.Narne

Dear Mr.Kishore,
Thanks for your advise. But my requirement is as below.
Property belongs to some OWNER - A. ( example - rent is 1000 rs / month)
Its leased out to Tenant - B
I am dealing here as a third party between A & B ( so rent is coming to me only from B later i will pay to owner A) , for that i am getting some commission from A some 10 % ( approx ).
i need the final ( FI ) rental entries as below.
Rental Entry
Tenant ( B ) A/c DR    1000
Owner A/c CR               1000
Commission A/c Entry
Owner ( A ) A/c DR             100
Commission A/c CR              100
Kindly advise to do needful, pls consider it as a priority issue.
Regards,
Subbarao.Narne

Similar Messages

How to use third party package in java application

hi, i am a student , new to java world can any of u tell me how to import third party package in our java application.
i want to know how CLI is done in java.
i am going thru this link http://www.codezoo.com/pub/component/5574
not able to get anything.
please please help me

There are two steps -
1. Import the classes you need from the package(s) using the Java import statement in your classes that need access to them.
2. include the 3rd part code (one or more .jar files and/or root directories holding the code's package tree and .class files) to your javac and java class path and optionaly to the class path found in your .jar's manifest file.

How to use Third Party DLL in Adobe Illustrator Plug In

Hi Everyone,
I want to design plug-in for Adobe illustrator CS6(64 bit). As first step I am referring sample plug ins from ../SDK/SampleCode. I am not getting how to use third party DLL in plug in.
Please let me know how to refer C# DLL in illustrator plug in.
Thanks in advance.

There's no C# API for the Illustrator SDK, so your plugin must be C++ at the very least. That said, you can probably write a bridge if you need to call out to a C# library/DLL.

How to make third party cables work on iphone?

I have been using the original Apple charger cable that came with my phone (iPhone 5C) for a good year, but then it broke. So I bought this non-Apple cable because I didn't really wanna spend a lot of money for an original one. I have already charged my phone with third-party cables before, so I thought it would work. The first time I used the non-Apple cord, there were minor difficulties because I had to plug and un-plug it several times before it actually charged. 2 days later, I plugged an original cable (which was my sister's) to charge my iPhone. Obviously, it worked. But later on, when I went to charge my iPhone with the non-Apple cable, a message popped up (This accessory may not be supported). I dismissed it, thinking it would still charge. No such luck. I tried to unplug and plug it, but still, it won't charge. Now, I have to charge through my laptop. Can anyone tell me how to make third-party cables work? I don't really wanna bring my laptop everytime I charge. I'm planning to only use this cable until I get my hands on an original one. Please help.

Are you seeing the EE (or T-Mobile) network name and network bars in the top right hand corner of the screen? Turn off WiFi (Settings>WiFi - turn this off). Is there anything next to the network name in the top right hand corner (3G, E or o)? E is Edge and o = GPRS.
If there's nothing next to the network name, turn off the iPhone and then turn it back on. To do this, press and hold down the button on the top until you see the 'Slide to Power Off' message. Slide and then wait for the iPhone to shut down. To turn it back on again, press and hold the top button again unti lkthe Apple logo shows on the screen.
EE and signal bars top left = Yes
Turned off Wifi and next to the EE is 'o' which you say is GPRS? What does that mean please??
Got this reply from another forum but still no success???

How to configure third party order ?

how to configure third party order ? and how the business know that the customer has received the goods so that invoice to be raised?

hi shoban,
Third party order processing is as follows:
Assume three companies X, Y and Z
X - The company,
y - The customer
Z - Vendor
When ever X gets a PO from Y to supply some goods, X has an option of either manufacturing those goods or procuring those goods.
If he is procuring the goods, there are two methods that are generally followed:
Method 1) After receiving the PO from Y, X creates a sales order against Y.
Now at the same time he also creates a PO to a vendor Z to produce the goods
Z produces the goods and supplies to X
X receives the goods from Z
Then X delivers the same goods to Y.
After that X invoices Y and Z invoices X.
Note : Here there is no direct/ Indirect relation between Z and Y.
This process is known as Trading Process. and the Material here is created with Material type HAWA.
The other method is a Third party order processing method:
Here the glaring difference is that instead of Z supplying the material to X and X in turn supplying the same material to Y.
X authorizes Z to supply the material to Y on his behalf and notify him once the delivery is complete.
Now Z supplies the material to Y and acknowledges the same to X.
Z will send a copy of delivery acknowledgement and invoice to X.
After receiving the delivery confirmation and invoice from Z, X has to verify the invoice and this process is known as invoice verification and is done in SAP through Tcode MIRO.
The next step for X is to create an invoice and submit to Y
Only after the invoice verification document is posted then only X can create an invoice for Y.
This is the business flow that is followed for third party order configuration.
There are few steps that have to be configured to enable the system to function as mentioned above.
Step1)
If you are always followwing a third party process for a material then you have to create the material using item category group BANS.
The procument type should be marked as External procurement (F) in MRP 2 view of the material master record.
if you are not always allowing third party order processing then u can create a material master record with item category group as NORM and the procurement type should be marked as ( X) meaning both types of procurment ( in house manufacturing and external procurement).
step 2)
the item category in the order should be manually changed as TAS.
For that you need to confugure the item category determination
ord type + item cat grp + usge + Hiv level = Item cat + Manual item cat
OR + NORM + + = TAN . + TAS
OR + BANS + + = TAS
Step 3)
make sure that during the item category configuration for TAS you need to mark relevnat for billing indicator as F
step 4)
The schedule line cateogry for this type should be CS.
make sure that you mark subsequent type as NB - purchase requisition in this schedule line category as this will trigger the purchase requision order immediately after the creation of the sales order and the PO to vendor is created against this purchase requiesion.
Hope it helps
Mastan

HT4623 How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the prchaser?

How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the purchaser or on account as long as someone else is paying they can not hold legal resposible there third privacy due to legal privacy laws.

Then you should read these.
http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
This was strange but has to do with how startup disk and nvram interact
http://forums.macrumors.com/showthread.php?t=1795765
I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together. Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
One thing I found last week and meant to mention: After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset.

How to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?

how to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?
Thank you.

Hi ,
Your windows is 32 bit or 64 bit .
If win 7 32 bit
Just copy the plugin from PSE 11 and paste it to PSE 13 plug-in folder.
If win 7 64
PSE 11 and PSE 13 are installed as a 32 and 64 bit respectively , so you need to install plug-in again.
Thanks,

HT3964 How to remove third party software?

How to remove third party software from the MacBook Pro 2011? I have software which is freezing my opening screen.

If the files came with an uninstaller, use it. To get rid of all the stragler files most applications leave download a 3rd party uninstaller.
AppDelete
AppZapper
AppCleaner

How to find at what time Idoc has gone out of SAP

Hi Gurus,
Could anybody let me know , how to check at what time Idoc has gone out of SAP in case of outbound Idoc.
I am not talking about Idoc creation date which we can see in control records in WE05.
-B S B

you have to see the status of the idoc ,if idoc status is green color ( Succesfully completed ) then use
EDIDC-UPDTIM ( This should be last Time)
Date is EDIDC-UPDDAT.
See the other table EDIDS to check the idoc status.
Thanks
Seshu

How can you handle Third Party Payment in Oracle Payroll

People I hope you all are at your Good Health!
I have a question and that is i would like to know how i can restrict a dependent from getting an Insurance benefit after he has crossed the Age =18 Also the To date must be calculated and populated automatically.
Also, how can we handle this third party payment in the Oracle Payroll.
All comments are welcomed.
Chetan

For the payment piece, create a payment method on the person record as a third party. you would need to have setup the recieving party as a third party organization before setting up at employee level.
During normal payroll processing, you may run Third party check writer to generate a check .
Ankur thank you for the response i have understood that we must create a Payment Method and Check the Check box for Third party Payment on Payment Method window.But how will that be handled for case where an employee has taken a Loan from a Bank and he has to be deducted every month from his salary how can we handle such a requiremet.
I did not understand when you said :
"you would need to have setup the recieving party as a third party organization before setting up at employee level.
During normal payroll processing, you may run Third party check writer to generate a check ."
Could you please explain me.
Regards,
Chetan

How to use third party APIs with Sun J2ME Toolkit

I've installed Sun J2ME Toolkit 2.1. If I intend to use other third party APIs with my existing toolkit, how do I do that. I can manage to get the jar file of the associated API classes, but how to integrate the same with the toolkit. Thanks in advance to all who support.

if I remember right, it is enough, if you put the .jar of the api in the lib/ directory of your project (<WTK>/apps/<yourProject>/lib/ )
hth
Kay

How to use third party plugin with FCP, I'm lost...

Hello,
I need informations about how to use plugins with FCP.
I do edit mostly classical concerts. I'd like to do basic audio post prod, without swaping between Soundtrack and FCP.
I need two simple things : add reverb (the built in reverb is really bad), and enhancer. So I looked for specialised third party audio plugins, but I couldn't manage to find something that work for me...
- Do FCP support VST plugins ? How to install them ?
- I tried a few audio units plugins. It works, but I couldn't get a friendly visual interface, like VST effects racks. Is it possible in FCP ?
- does anybody know a good reverb plugin with a friendly interface compatible with FCP ?
Please help, I'm lost !
Emmanuel

I need two simple things : add reverb (the built in reverb is really bad), and enhancer.< </div>
What you NEED is a better recordist at the concert, someone who understands the peculiarities of your specific video deliver plans.
Soundtrack Pro is right up there with Motion in its impossible-to-understand interface paradigm shift away from industry standard tools. However, if you are in the position of being a sound editor, you must find a tool that works for you. STP might not be the one, certainly isn't for me. You could always try Logic. Yeah, good luck with THAT.
bogiesan

How to use third party jdbc drivers ?

Hi,
Im new to sun one app server.i have some existing CMP
bean (currently testing under J2EE RI).database used is
SQL server 2000 and using a 3 rd party JDBC Driver.
my question is. if i switch to sun one app server, do i need
anyother third party stuff to support CMP using SQL
Server? (other than the exisiting jdbc driver andSQL Server).
I read somewhere that in sun one we need to get a
persistance manger from the 3 rd part. is it necessary?
can i use my plain jdbc driver with the builtin persistance
manager of sun one app server?. how can i do that ?
thanks in advance
-mr ex

Hi,
Persistence manager from 3rd party is not required.You
can use the built in persistence manager of Sun one application server.
You can refer the following link for creating new persistence manager
http://docs.sun.com/source/816-7156-10/agj2eres.html#47595
Get back in case of issues

How to install third-party SSD as boot disk in MacPro 5,1

I had so much trouble with this that I thought I'd post a recipe that others could follow.
The first thing you should know is that it's not possible to get a non-Apple SSD recognized in a sled slot of a MacPro 5,1. It just doesn't see them at all, even if (as some suggested) previously partitioned as a GUID partition (which works in a MacBook Pro, but not a MacPro 5,1). This is true even with the most up-to-date EFI firmware. You're going to have to use a PCIe adapter card.
The next thing you should know is that not all PCIe SATA3 SSD adapter cards are bootable on a MacPro 5,1. For instance, even though the Sonnet Tempo SSD is advertised as working for a boot drive in a Mac Pro, it actually works in any Mac Pro *except* the 5,1. In a 5,1 drives on the card do not work as boot drives, either with option boot or if you select it as the startup drive after booting from something else. Also, EFI boot is extended by about a minute -- not the end of the world, but an annoyance. The Tempo card does work well for add-on drives, its very fast. I am pretty sure the Tempo Pro variant of the card also does not work, as the Sonnet support guys told me that they have to use use rEFIt for booting 5,1 MacPros in their lab. I imagine if the Pro worked they would have pointed me at that instead. (Note that rEFIt has been superseded by rEFInd, http://www.rodsbooks.com/refind/. I didn't try using rEFIt or rEFInd because I found a better way, but if you want to dual-boot to Linux those utilities are apparently Da Bomb.)
An Apricorn Velocity x2 Duo card *will* boot, and does not have a long EFI boot delay. That card is a little more expensive than the Tempo SSD (but not the Tempo Pro SSD) but it works properly. It's worth the extra money, especially since it's the only card I could find that explicitly claimed to work as a boot drive on a 5,1 MacPro. And it does.
One caveat: With the Tempo SSD the SSD drives were invisible until repartitioned in GUID format, which also happens if you try to use a third-party SSD inside a Macbook Pro. I found that I could repartition one drive, a Crucial MX500 960GB, using a run-of-the-mill USB SATA2 adapter. Unfortunately this solution did not work with a Samsung Evo 1TB drive, I had to use an external USB3 enclosure. Moreover, the enclosure supported both FireWire and USB3 but FireWire did not work. This FireWire issue might be due to the super-cheap enclosure I was using, so YMMV, but keep in mind that it's possible that you'll need either a USB3 expansion card in the MacPro, or a different Mac, to perform the initial repartition to GUID format.
It's possible that SSDs would be visible on the Velocity card even before repartitioning, I don't know as both of my drives had been repartitioned prior to trying the Velocity. So, it might work ... but you might need to partition externally.
I don't know if pre-partitioning is necessary with the Velocity card, as I only ever tried pre-partitioned drives with it. If you try the Velocity and the drive isn't seen, that's the problem and you'll have to use an external SATA adapter of some sort to repartition before installing on the Velocity card.
After partitioning the drive and installing on the Velocity card, it worked fine. Yosemite installed properly and with reboot it blazed.
Next up, TRIM support. For some reason known only to Apple, the Apple AHCI driver refuses to enable TRIM support for anything other than Apple drives. It's possible that there are or were bugs in some of the early SSDs and Apple is just playing it safe, although I would have preferred to have the option to enable TRIM or not if that's the case. Unfortunately there is no such option, you have to use a substitute AHCI driver.
Unfortunately if you're using Yosemite you cannot use a substitute driver without disabling kext extensions, because Apple will not sign anyone else's driver (at least not at the time of this writing). That's unfortunate, I would prefer to have signed extensions if I could, but realistically speaking you're no worse off in terms of security than you were with Mavericks so it's not the end of the world. With a little luck Apple will either start supporting TRIM on third-party drives or starts signing third-party drivers sometime in the future.
So: Before you can start TRIMming drives, you first need to run this command, or something like it:
sudo nvram boot-args=“kext-dev-mode=1”
I rather like seeing the boot process, rather than just the Apple logo, so I use this:
sudo nvram boot-args=“-v kext-dev-mode=1”
I tried both Trim Enabler (http://www.cindori.org/software/trimenabler/) and Chameleon SSD Optimizer (http://chameleon.alessandroboschini.com/). As of this writing the Chameleon driver is more up-to-date, and comes with some additional utilities that are pretty nice. Take your pick, though, both worked fine in my experiments.
With a TRIM-enabled AHCI driver, kext signing disabled, a Velocity card, and your favorite SSD you are in business.
The only weird thing after all of this is that non-boot SSDs on the Velocity card (or on the Tempo) are ejectable. As far as I can determine there’s no way to mark them as non-ejectable. That’s a minor annoyance compared to the performance you get out of the SSD, though.
Because, with this stuff in there, yowza is the MacPro 5,1 a fast machine. You Will Like It. Enjoy!

Then you should read these.
http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
This was strange but has to do with how startup disk and nvram interact
http://forums.macrumors.com/showthread.php?t=1795765
I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together. Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
One thing I found last week and meant to mention: After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset.

Plz suggest me How to use Third party jar files in ODI

Hi all,
I need to know how to use the third party jar files or our own customised jar file in ODI.
regards
palash

Hi all,
I am unable to implement..................
I have one question, if I add any type 4 coneection supported jar file in my ODI_CLASSPATH can I use them in writing procedure to connect Databases
I am trying to connect Oracle database by putting Ojdbc14.jar in the class path of ODI_CLASSPATH so that in my procedure I can use it .............but failed I dont know how to solve this problem.
another thing Open Tools are delivered as a Java package (.zip or .jar) containing several files:
A compiled Java .class file
Other resources, such as icon files is it so ..............Then I can use full java apllication by preparing required bunch of classes and by set them appropriately in open tool
need ur suggestion....
regards
palash

How to handle Third party management WRT to Lease out in SAP - REFX

Similar Messages

Maybe you are looking for