How to handle transport for mutiple clients ?

Hi, all:
There is only one BS (one client) in our Dev landscape.
In Corresponding QA landscape, it has two clients.
How do we define tranport target in this case ?
Thanks in advance.
Liang

HI Liang,
If you see my posting about dummy BS system, then in it for receiver determination you need to add two BS (In Dev. one will be real and another will be dummy)
Here the Message passed will be reached to both BS simultaneously.
If you would like to bypass the message to individual client then you could also add the bypass conditions in Receiver Determination (condition editor)
When you will be transporting to Q, it requires two receiver BS to be configured in ID.
Each client will have single BS, so this way you could achive your requirment and contorl the message to be send either to both BS or to individual BS.
This will definately work
Thanks
Swarup

Similar Messages

How to handle transport errors????

Hi Gurus.
How to handle transport errors and create a workflow email to the owner of the transport from solution manager??

Solution manager does provide automatic e-mail notification when status changes or error occures.To answer your question when ever transport fails ..you can configure such way that a support message can create automatically and notify support team / respective person.
If you are not using any t-code do you have any thoughts where you can create transport request???? and are you using solution manager only for maintanence project or for implimentation project also????
Hope this helps you....
Praveen

How to handle bdc for more than one transaction?

how to handle bdc for more than one transaction?

Hi srk,
I am providing you with some references below. Hope this prove to be helpful to you.
Method 1:
Use one BDC_OPEN_GROUP
Multiple BDC_INSERT
One BDC_CLOSE_GROUP.
Call function BDC_OPENGROUP.
Build BDC data and call lBDC_INSERT for transaction 1
Build BDC data and call lBDC_INSERT for transaction 2
Build BDC data and call lBDC_INSERT for transaction 3
paas the tcodes to bdc_insert.
call function BDC_CLOSE_GROUP.
Also check this out:
Here we need to record 2 transactions (shdb).
Once completion of the recording. Populate the data into input internal table .
Loop the internal table and process the 2 transactions
like
1. BDC_OPEN_GROUP
2. LOOP AT ITAB
a. Populate first transaction recording data
and pass transaction to the BDC_INSERT_GROUP.
BDC_INSERT_GROUP.
b. Populate second transaction recording data
and pass transaction to the BDC_INSERT_GROUP.
BDC_INSERT_GROUP.
ENDLOOP.
3. BDC_CLOSE_GROUP
the above info can be found at : How to use 2 transactions in BDC?
Also check this out:
Suppose u have created recordings for transactions 'MM01' 'XK01' and 'VA01'.
Then do this:
bdc_open_group.
after this we have to fill the bdcdata structure for one transaction.here 'MM01'.
bdc_insert.
refresh bdcdata.
after this we have to fill the bdcdata structure for one transaction.here 'xk01'.
bdc_insert .
refresh bdcdata.
after this we have to fill the bdcdata structure for one transaction.here 'va01'.
bdc_insert.
bdc_close_group.
Hope these are useful to you.
Please reward if any of the above are useful.
Regards,
Kalyan

How to set registry for sql client on win...

Hi.
how to set registry for sql client on win fro work with Ukranine
charset.
I got such problem
nls_language set to American_Ukranine.clmswin1251 on client
this give me ukraniane char.
but it override all my settings in initsid.ora this mean
nls_date_format=DD-MON-YYYY
nls_date_languages
twhen I type select sysdate vrom dual answer is 11-jun-99, but
not 11-(ukr month)-1999;
What should I correct in regestry? ( i don't like to do alter
session set..... each time I start sqlplus )
Thank You in advice
null

you can create method on Application Module and to Client listener
like
    public Object[] getData(Number n,Date d)
Object val[]= new Object[2];
String sp = "{? = call get_data(?,?,?)}";
            Connection conn = null;
            CallableStatement proc = null;
            try {
             //   conn = isConnSupplied ? userConn : ResourceManager.getConnection();
                proc = getDBTransaction().createCallableStatement(sp,0);
            proc.registerOutParameter(1, OracleTypes.Number);
            proc.setObject(2,12);
           proc.setObject(3,dateobj);
          proc.registerOutParameter(2, OracleTypes.VARCHAR);
            proc.executeQuery();
             int amttext= proc.getInt(1); //for return value
String msg=proc.getString(2);//for out param
val[0]=amttext;
val[1]=msg;
            catch(Exception e)
                System.out.println(e);
return val;
}and access this method from backing bean using following code-
            BindingContext bindingctx=BindingContext.getCurrent();
               BindingContainer binding=bindingctx.getCurrentBindingsEntry();
            OperationBinding operationBinding1 = binding.getOperationBinding("getData");
            operationBinding1.getParamsMap().put("n",anyno);
            operationBinding1.getParamsMap().put("d",dateobj);
            operationBinding1.execute();
            String vval[] =(String[])operationBinding1.getResult();

How to handle error for a file to file transform in ODI

I am doing a lab for file to file transformation where source = CSV file and target = Flat file.
1) When I am changing the datatype in source two files are getting created where one having the errored out data and the other having the errored message, how how to handle the errored data?
2) If the target path is changed the session in ODI is showing as completed, it should error out. Here no files are created in source as earlier. Hoe to handle this type of error?

Hi,
I have used the following KMs in my transformation with the following options:
IKM SQL Incremental Update
INSERT    <Default>:true
UPDATE    <Default>:true
COMMIT    <Default>:true
SYNC_JRN_DELETE    <Default>:true
FLOW_CONTROL    <Default>:true
RECYCLE_ERRORS    <Default>:false
STATIC_CONTROL    <Default>:false
TRUNCATE    <Default>:false
DELETE_ALL    <Default>:false
CREATE_TARG_TABLE    <Default>:false
DELETE_TEMPORARY_OBJECTS     <Default>:true
LKM SQL to SQL
DELETE_TEMPORARY_OBJECTS    <Default>:true
CKM Oracle
DROP_ERROR_TABLE    <Default>:false
DROP_CHECK_TABLE    <Default>:false
CREATE_ERROR_INDEX    <Default>:true
COMPATIBLE    <Default>:9
VALIDATE    <Default>:false
ENABLE_EDITION_SUPPORT    <Default>:false
UPGRADE_ERROR_TABLE    true

How to handle threading for TCP communication?

Hi,
I've a project to control two separate applications (C++ and LabView) and both of them are implemented as server. Another client program (C++) is used to control those application. The communication among them are implemented using TCP socket. The client program sends message to start or stop some tasks on the servers. The client program also sends time (hh:mm:ss) with the start and stop message to determine when to start or stop.
In C++ application (server): The application listens for connection and when gets one, it creates a communication thread to handle that and again listen for another connection. The communication thread handles message passing and when it receives start or stop message, it creates a timer thread with the received time to trigger a task at specified time. And after that it waits for message from the client. So, here, when thread (communication, timer) is needed, it is created.
In LabView (server): I've tried to create same thing as the C++ server. But, from LabView manual and others forum threads, I got that LabView is multithreading and it can be done using independent loop. So, I'd to create four loops in a diagram:
1. Listen for new connection
2. Handle communication for already received connection
3. Start timer
4. Stop timer
and they are run at the beginning of the execution and communication among them are managed using local variables. But, 2,3 and 4th loop can handle only one connection and it can handle another if the current is closed. But, the C++ application can handle more than one connection by creating thread when it is necessary but not at the beginning of the execution of the application.
Is there a better way to implement this in LabView?
Is it possible to handle multiple connections and create diagram node/block (like thread) dynamically like C++?
Thanks.
Using LabVIEW 2010, Visual C#, Visual C++ (2005, 2008, 2010)
Solved!
Go to Solution.

There are several ways to do this in modern LabVIEW and you should probably search the Example Finder for some TCP examples. The classic way is to transfer the connection refnum from the listen loop to a communication loop that adds it to an array of connection IDs and then continously iterates over this array to do the communication. It works since about LabVIEW 4.0 perfectly for me even for applications with HTTP based communication protocol. But you need to make sure of course that the communciation handling for one connection isn't delaying its work for some reasons as that would delay the handling of the other connections too, as they are really worked on sequentially. If you encounter an error, the connection ID is closed and removed from the array.
The other is that you create a VI that does your whole communication and terminates itself on an error or when getting the quit command. Make this VI to be reentrant and then launch it through VI server as reentrant instance, passing it the newly received connection refnum form the listen loop. Then use the Run method to let it start and operate like an independant thread.
For all of these you should be able to find an example in the Example Finder when searching for TCP.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to handle error for a Db Table to Db table transform in ODI

Hi,
I have created two table in two different schema source and target, where there is a field for e.g.- place where the datatype is varchar2 and data inserted is string.
In designer model of ODI i have put the type of place as number in both source and target and accordingly done the mapping.
When it is executed it should give an error, but it got completed but no data is inserted neither in target table nor in error table in the target schema(E$_TARGET_TEST which is created automatically).
Why the error is not given and how to handle such type of error..
Please help.
The codes for source and target tables are as follows:
source table code:
CREATE TABLE "DEF"."SOURCE_TEST"
    "EMP_ID"   NUMBER(9,0),
    "EMP_NAME" VARCHAR2(20 BYTE),
    "SAL"      NUMBER(9,0),
    "PLACE"    VARCHAR2(10 BYTE),
    PRIMARY KEY ("EMP_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "USERS" ENABLE
inserted data:
INSERT INTO "DEF"."SOURCE_TEST" (EMP_ID, EMP_NAME, SAL, PLACE) VALUES ('1', 'ani', '12000', 'kol')
INSERT INTO "DEF"."SOURCE_TEST" (EMP_ID, EMP_NAME, SAL, PLACE) VALUES ('2', 'priya', '15000', 'jad')
target table code:
CREATE TABLE "ABC"."TARGET_TEST"
    "EMP_ID"     NUMBER(9,0),
    "EMP_NAME"   VARCHAR2(20 BYTE),
    "YEARLY_SAL" NUMBER(9,0),
    "BONUS"      NUMBER(9,0),
    "PLACE"      VARCHAR2(10 BYTE),
    PRIMARY KEY ("EMP_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "USERS" ENABLE

Hi,
I have used the following KMs in my transformation with the following options:
IKM SQL Incremental Update
INSERT    <Default>:true
UPDATE    <Default>:true
COMMIT    <Default>:true
SYNC_JRN_DELETE    <Default>:true
FLOW_CONTROL    <Default>:true
RECYCLE_ERRORS    <Default>:false
STATIC_CONTROL    <Default>:false
TRUNCATE    <Default>:false
DELETE_ALL    <Default>:false
CREATE_TARG_TABLE    <Default>:false
DELETE_TEMPORARY_OBJECTS     <Default>:true
LKM SQL to SQL
DELETE_TEMPORARY_OBJECTS    <Default>:true
CKM Oracle
DROP_ERROR_TABLE    <Default>:false
DROP_CHECK_TABLE    <Default>:false
CREATE_ERROR_INDEX    <Default>:true
COMPATIBLE    <Default>:9
VALIDATE    <Default>:false
ENABLE_EDITION_SUPPORT    <Default>:false
UPGRADE_ERROR_TABLE    true

How to disable spool for particular client

Hi experts,
we have two clients in our development server ( 008 and 009)
we are using 009 as quality. this is newly imported client from prd .I want to disable spool in 009 client. my requirement is, no user able to take printouts from 009.is there any possibility to disable for particular client? around 150 users have access for 009. i think its not easy to remove the authorization from each user manually. Kindly suggest me to do this.
Regards,
Nagendra.

Hi Venkatesh,
008 is development client. what ever i do regarding this deactivating the spool in 009, it should not effect 008 client.
it is possible by removing authorization from each user in 009 client. but it takes long time.
is there any way to do this ?

How to handle received data after client timeout

I believe this is a common question and sorry if it is asked and answered before. I didn't find the answer.
I have a client/server app. there mainly two threads. one is to handle my regular GUI command, and the other one is to check if the server is still alive by sending ping command every 5 seconds. I set the client timeout 10 seconds. My problem is as the following:
1. client sends a command CMD
2. Client timeout after 10 seconds
3. The background thread sends a Ping command
4. Client received the response for the first command CMD
5. then the client assume the response is for the Ping CMD and mismatched!
I am thinking about using the following ways to handle this issue, wondering if anyone could let me know if they are ok and which one is better. OR there could be a better solution altogether.
Method 1 - if client time out, close everything, consider server is dead. try to re-establish connection again
method 2 - attach a ticket to each command and response, so that they can be matched regardless the order it is receive.
Thank you very much!
livz

Thanks for all the replies.
I use the ping to check if the server is connected and a lot of my GUI functions are enabled/diabled based on whether the server is in presence. for example, certain buttons or operations are disabled if the server is disconnected. I didn't find a better way to handle this. Please advice if there is anything better.
10 seconds was randomly chosen based on experience. It works most of the time but sometimes it times out.
again, thanks a lot for any advice!
livz

How to Handle Events for JOptionPane buttons?

Hi All,
I need a help...
I am trying to develop a simple SWING application that consists of multiple elements (mainly text fields) and a Submit button. On pressing Submit button, it should validate all the fields and then do something else. But if some fields are left blank, then it should give a pop-up message and on clicking the OK button on the pop-up message, the focus should go to that text field which is left null.
The problem is I am not able to understand how to Capture this OK button click-event of the pop-up message. I mean how to do something when the OK/Cancle button of the pop-up window is clicked.
Please Help me.
Thanks in Advance,
Ujjal

As already pointed out, JOptionPane has some static methods which show a dialog, and return an int, or a string. The whole point of this class is to remove the need for any event handling by the developer, that is, you simply call the showDialog method or whatever, and it returns a value telling you, for example, which button was pressed - no need for action listeners at all. The result of the showDialog method (or whichever you use) tells you which button was pressed. Check the javadocs for JOptionPane for details of several constants that indicate which button was pressed
The class exists to make simple dialogs trivial to generate - you're overcomplicating things!

How to change Port for SAP Client on SAP R/3 Server?

The defualt port for SAP GUI Client is 3200.
How could I change the SAP GUI Client port to say 5222 instead of 3200?
How can I view the full list of all ports required by SAP R/3?

Freddy,
I don't have the document handy but there was a document on service.sap.com/security which would give you a list of all the ports. SAP's wording is some thing like "specific ports are fixed and SAP does not support changing that port number".
In case of GUI client and your example of 3200, as you know 00 is based on the fact that that is your instance number. You could change last two numbers by assigning a different instance number (and not 00).
Thanks
BMG

How to set commandtimeout for oracle client

Hi ,
does anybody have an idea how to set the command timeout for ODP or MS managed oracle client for oracle.
This property does not seem to be supported . Although there is property exposed for command time out it does not work for odp and for MS oracleclient it is not present at all. Could anyone provide a workaround for it.
Thanks in advance.
Rahmatullah

You're looking for the VirtualBox forums. https://forums.virtualbox.org/
This forum is for discussion of Oracle VM Server.

How to handle TDS for Contractor under Section 94C in SAP B1 9.0

Hi Expert
If the credit or the payment (One time Payment) in pursuance of the contract does not exceed Rs.30,000/-, no deduction has to be made at source. However , if the aggregate of all amounts paid/credited or likely to be paid/credited exceeds Rs. 75,000/- then tax at source is to be deducted.
how to manage this in SAP B1 with single WTax code??
regards,
Raviraj

HI Raviraj,
Have you checked the same by setting the threshold as 75000? You may not be able to deduct TDS at the the time of payment but you can use DP Invoice for the same.
Try this, it should work.
Thanks,
Joseph

How to create stub for C++ client to invoke a j2ee web service

Hi All,
I have developed a j2ee web service which is deployed in Tomcat. I have to call this service from C++ client. I have followed "Axis C++ Client User's Guide" to create stub for my service. I am running WSDL2Ws tool with command
D:\axisserver\axis-c-win\wsdls>java -cp %AXISCLASSPATH_C%; org.apache.axis.wsdl.wsdl2ws.WSDL2Ws Calculator.wsdl -lc++ -sclient. While running this WSDL2Ws tool , it is giving error.
Exception Stack is as follows.
Exception in thread "main" java.lang.NoSuchMethodError
at org.apache.axis.wsdl.wsdl2ws.info.Type.<init>(Unknown Source)
at org.apache.axis.wsdl.wsdl2ws.info.TypeMap.getType(Unknown Source)
at org.apache.axis.wsdl.wsdl2ws.WSDL2Ws.createParameterInfo(Unknown Source)
at org.apache.axis.wsdl.wsdl2ws.WSDL2Ws.addRPCStyleInputMessageToMethodInfo(Unknown Source)
at org.apache.axis.wsdl.wsdl2ws.WSDL2Ws.setMethodInfo(Unknown Source)
at org.apache.axis.wsdl.wsdl2ws.WSDL2Ws.getServiceInfo(Unknown Source)
at org.apache.axis.wsdl.wsdl2ws.WSDL2Ws.generateWrappers(Unknown Source)
at org.apache.axis.wsdl.wsdl2ws.WSDL2Ws.main(Unknown Source)
Anybody can suggest me what i missed...
Thanks in advance...

Hi all,
I have solved this issue. I had JDK1.3 by default. So it was giving error. When i use java from jdk1.4, it created stubs for web service. Java version was the problem. Now it is working fine.
Thanks....

How to handle pricing for items sold in prepacks

The requirement: Sell individual items together as a prepack and offer a discounted price. These individual items in the preapck are also sold individually at full price.
The Issue: Returns. If a customer returns the individual item, how do we know if it was sold as the prepack or individuallyu2026so we end up crediting the customer the higher value.
Your suggestions will be appreciated.
Regards,
Hemanth

Hi,
you have to use authorizations in this case for approval process in CATS IT 0316 and It 0328 are used for authorizations. These are two dummy infotypes.
it is verymuch possible to enter data in CATS for a single PERNER via two or more profiles.
Regards,
Kapil Kaushal

How to handle transport for mutiple clients ?

Similar Messages

Maybe you are looking for