How to have one provider with multiple portlets in JDev 11g

Hi,
I am trying to create Oracle PDK Portlets using JDeveloper 11g but for each portlet JDeveloper is creating a provider. As In JDeveloper 10.1.3.4 we can have one provider with multiple portlets in it. But JDev 11g creates provider for each portlet. How can we have one provider with multiple portlets in JDev 11g. Is it something changed in 11g version or am I doing it wrong. As the Help says we can have multiple portlets in one provider but when creating portlets it does not do that. Any help is appreciated.
Thanks

Similar Messages

How to control one server with multiple clients via TCP/IP

I am wanting to control a single server with multiple clients. Only one client would be active at a time, so there would be no conflict. I want to use TCP/IP. So far, I have programmed a cluster that passes data back to the server with no problems. The challenge come in when a second client is added to the mix. I have't been able to figure out how to turn each client on and send the appropriate data and then turn it off so it doesn't keep sending the same data to the server.
Here are the things that I have considered and did some preliminary testing, but don't really know how to impliment:
1. Send a numeric on the front of the cluster packet that tells the server that data is on the way.
2. Send a boolean on the front of the cluster packet to somehow turn the server TCP/IP on.
The problem I have found is that LabVIEW TCP/IP doesn't like to be turned on and off. If it doesn't get the data it expects, it goes into a reset mode and that kills the response time.
Any help?

You should consider implementing a set of simple one-byte commands that can be sent back and forth between the Server and the Clients. You can base all of these ideas off the example in the Example Finder under Networking >> TCP and UDP called Multiple Connections - Server.
You will have two loops in the server VI: one to wait for new connections, and one to send and receive data from the existing connections. For instance, after one of the clients connects, it can request control of the server to send data to it by sending the character "R" for request. Every time the send/receive loop of the Server executes, the first thing it can do is to check all the existing connections to see if any of the clients have sent a control request ("R"). If so, it will create a buffer (array) of control requests. This could be in the form of Connection IDs or indexes in the array for a particular Connection ID. Your choice.
After the Server receives a request for contol, if it is not already under control by another client, then it can send a response to the first client on the control request list. For instance, the server could send the first client a "S" command for send. Note that after the clients send their control request, they should execute a TCP Read and wait indefinitely for the server to respond with the one-byte "S" command. Then, once the client in control is finished sending data to the server, it could send the character "X" telling the Server to release it from control.
The example I mentioned above already does a similar thing. Note how when a client wants to disconnect, they send the letter "Q". You can see this in the Multiple Connections - Client VI. The Server then checks each individual connection to see if it's received this one-byte command, and if it has, it closes the connection to the client. This is what you would want to implement, but instead of having just one command, you'll have to distinguish between a few and build up a buffer of control requests.
Finally, if a client does decide to disconnect in your application, they could send the command "Q" just like the example above. At this point, close the connection and remove that Connection ID from the array of connections. You will also have to handle the case that this client was in the request control waiting line when it disconnected, in which case you need to delete it from that array as well.
This will definitely work for you, but it will take some work. Best of luck!
Jarrod S.
National Instruments

How to use one PSE with multiple URLs?

I need to hit my DMZ SAP Web Dispatcher with multiple unique URLs. I am starting off using webdisp1.abc.com and webdisp2.vde.com. DNS will resolve both the Web Dispatcher Host. Following Tobias Winterhalter's Blog: Name-based virtual hosts and one SAP Web Dispatcher to access multiple SAP systems.
My question is how do I go about generating the pse so I can store both webdisp1.abc.com and webdisp2.vde.com? Do I just import the first request and initiate another certificate request using the same pse?
Example
sapgenpse gen_pse -s 2048 -p D:\<file path>\SAPSSLS.pse -r D:\<file path>\webdisp1.req CN=webdisp1.abc.com, OU=IT, O=XYZ Inc., C=US
Cheers,
Dan Mead

Hi Daniel,
what you are looking for are so called SAN certificates. As Martin said, with sapgenpse you are pretty out of luck. However you can create the certificates using openssl and then use sapgenpse to import them into a pse. There are a number of guides on how to create SAN certificates on the web, like the one mentioned by Martin from CAcert (which is one of the best imho) or this one. And there are also guides on the internet on how to convert OpenSSL keys to PSE.
You should however keep in mind, that SAN certificates are more expensive than standard certificates. Therefor they only pay if the hostnames in there are stable for the lifetime of the certificate. If the hostnames need to change once a year, you already will be better off (from a cost perspective) by creating one pse per hostname an let the webdispatcher listen to different addresses, as each hostname requires a new certificate signed by the CA.
Please also make sure, the systems and browsers connecting to your webservers are able to understand SAN certificates. For SAP systems this requires at least pl24 of the sapcryptolib.
Kind regards,
Patrick

How to use one application with multiple schema without copying application?

Hi,
Previously we are using oracle forms and by that we can manage by using a set of folders containing fmx and use different schema/database for different customers. so the source code comes from one individual file but used for different database users.
is it possible to do this without copying application in apex?
reason is because if applications are copied for each customer, and in a situation where a page has a bug, the developer must correct multiple pages across all the application. This would not be appropriate to manage.
could this be done in apex? or is there any other approach?

Hi,
An application is tied to its parsing schema, so it is not possible to have one code base which you can then point to different schemas. I have seen some threads relating to dynamically setting the parsing schema, but I don't think it has worked to well, and would not be a supported configuration by Oracle.
The normal way to do this is to have one schema and for each entity where it is logical you will have an extra key which is the customer id. I mention where it is logical, because not every entity needs its own data defined by customer. Some data will be common across all customers, such as lookup data and some entities will comprise child entities by which the data separation will be implied by the parent. You can then use Oracle's Virtual Private Database feature to implement a seperate view of the data through the application, based most likely on the customer who is logged on.
Hope this helps.
Regards
Andre

How to return one ROW with Multiple value seperated by Colon in a SQL Query

Hi,
I have a SQL query as mentioned.
select deptno
from deptI want to mofidfy this query, so that this should return me department list with colon delimeted in one ROW.
10:20:30:40.......Thanks,
Deepak

In 10g:
select rtrim(xmlagg(xmlparse(content deptno || ':')).getstringval(), ':') data
from dept;
DATA
10:20:30:40with apologies for the abuse of XML...

How do i take one layer with multiple selections...

how do i take one layer with multiple selections and make those selections their own layer?

Yes sir. It w was really hard to explain. It is discontiguous segments that are separated by transparent areas. And I want those non transparent areas to be on their own layer. I have a photo shop file that has a bunch of buttons on them and they are on a transparent background. It is one layer. I want to select all the buttons and put them on their own layers. I can do this manually by selecting a button and cmd Just to a new layer, but when I have 200 buttons it is a daunting task.
Sent by MailWise<http://www.mail-wise.com/installation/4> – Your emails, with style.

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

HT4847 We have one cloud with three users. How do we separate individual info,ie calendars, contacts, downloads, etc. thank you for help

We have one cloud with 3 seperate users. How do we seperate individual info, downloads and contacts?

In this case you have two create at least two completely new separted accounts (with its own email address, etc.). You can create a limited number of new iCloud accounts on each iOS device or Mac. Therefor go to...
iPhone/iPad (iOS 5): "Settings > iCloud" or "Settings > Mail, Contacts, Calendars > iCloud"
Mac (Lion or Mountain Lion): "System Preferences > iCloud" or "System Preferences > Mail, Contacts, Calendars > iCloud"

I have one library with around 50 Projects (this represent around 1500 pictures) I gave to hundred of them a specific keyword how can I found them ?

I have one library with around 50 Projects (this represent around 1500 pictures)
I gave to hundreds of them a specific keyword how can I found them ?
Marc

If it is ok for you I would like to ask you another question.
With the filter settings removes I discover that I have more then 10'000 pictures !!!!!!!!
As I'm organized to have one archive files per year, I'm discovering a lot of pictures which have a keywords "from MobileMe". Is that correct to assume that is represent the pictures from the old world from mobile.me ?
Sorry but I can't help with this, I never used mobile me so I'm not sure how it worked.
It seems safe to assume that the images tagged with the MobileMe keyword were in your MobileMe galeries but exactly what that indicates I can't say.
regards

Can i fill one provider with more than one application?

Hi,
I have so many application. Currently, we adding one provider with one portlet. So, we just want to know is it possible to add one portlet fill with many application?
The idea is we want to reduce provider in portal.
Thank you.

No, you can only sync with one. If you sync with another it will erase the device in order to mirror the other iTunes library.

I want to use Mac Mail for my work email address, which containts multiple outbound options (i.e. hr@, me@ etc). Is there a way to set up Mac Mail to have an account with multiple outbound addresses rather than adding in multiple accounts?

I want to use Mac Mail for my work email address, which containts multiple outbound options (i.e. hr@, me@ etc). Is there a way to set up Mac Mail to have an account with multiple outbound addresses rather than adding in multiple accounts?

This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work.

One application with Multiple schemas- common application frame work

Hi All,
I am trying setup a common application frame work in apex. Please help me.
How to achieve this.
Creation of one application attached to different schemas at run time. So that my application maintaince is going to be easy instated of creating copies of same application.
More details:
1. I have one application with 100 pages pointing to a schema dev_common in one workspace APP_COMMON. I have 50 schemas with same structure of dev_common schema with different set of data ( because of large amount of data).
So I want to create one application attached to different schemas.
2. And another thing is I have 100 users, the user can work on 1 or multiple schemas ( I mean same application with different schemas attached)
Any help much appreciated.
Thanks,

Thank you for the reply.
>> b) I think you have to give access rights for the dev_common and app_common to all users.
Dev_common schema is a kind of placeholder. I have 50 schemas same as dev_common because of different business requirements but the front end is same for all 50 schemas. How can we create one application used for 50 schemas instead of creating 50 applications and 50 workspaces.
Please help me.

I need your expert opinion on how to create a map with multiple conditions.

Hello.
I need your expert opinion on how to create a map with multiple conditions.
I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
How can i create a cursors within the map?
My function creates table and cursor.
Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
I would appreciate any help / advise on this.
Thank you very much

thanks a lot for your reply - i will look into this option :-)
it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
Anyway, thank you very much for your suggestion.

One order with multiple lines in OM is creating multiple invoices

Application: Oracle 11i (11.5.3)
Modules implemented: GL, OM, AR, AP, PO and CM
Business Requirement:
Our client would like to create Order consisting of multiple lines in Order Management.
The Orders created in OM with multiple lines could be booked, picked, released and transferred
over to Accounts Receivable. On transferring over the Orders from Order Management to Accounts
Receivables using Auto Invoice process the Order should create ONE invoice with multiple lines.
Moreover, for the multiple lines created on an invoice deferred revenue could be applied.
( eg. An order is placed for software and support. The support is to be invoiced all at once but revenue deferred to 1/12
recognized each month as revenue is earned.)
Right now we are getting two invoices. It is putting the deferred revenue item on a seperate invoice. Is this normal
functionality? How can I get both on one invoice.
thanks

Hello Monique,
Well you can have one invoice generated for an order with multiple lines. This is possible by changing some rules in Account Receivables. Use the grouping rules under setups->autoinvoice in AR. You can club your invoices based on any of the columns of ra_interface_lines_all. Hope this works for you.
Arvind

How to design a form with multiple lang(Arabic and Eng) in a page

Hi All,
Could you pls help me how to design a form with multiple languages. when I set the form proprties-->Form Locale as Arabic. English text is comming in reverse and when set the FormLocale as English, Arabic text is comming in revese.
Pls help me how to design
Thanks in advance.
Regards,
Jayakar

I am not sure how you can have two different languages inside the same PDF.
Alternatively, if you want to place only the static labels, you can convert all the static label in one language to images and set the form language setting to other. And place the images inside the form using Image field. For example, you can keep the form language as English and then convert all the arabic language labels/ Static text to images.
Anotherway,
Have same sections in both the languages and hide and unhide based on the user selection of the language..
if your user chooses Arabic, then you can unhide the Arabic sections and change the form language properties programmatically..
Thanks
Srini

How to have one provider with multiple portlets in JDev 11g

Similar Messages

Maybe you are looking for