How to hide fields in table view

Hi,
I'm populating the contents of an internal table in a table view. I want to know how to hide few fields in table view. I'm working on classical BSPs.. no MVC and I have not used iterator.
Thank you
Sreesanth.

just to hide certain fields (columns) you dont need iterator. you could use columnDefinition attribute of htmlb:tableView tag.
to do this declare two page attributes as below
col_control_tab     TYPE     TABLEVIEWCONTROLTAB
col_wa     TYPE     TABLEVIEWCONTROL
now in the oninitialization event. fill col_control_tab with the required column details.
suppose the itab has columns 1 to 10 and you want to display only column 1 and 8 then the coding would be.
clear col_wa .
move: '1' to col_wa-columnname , " field name of column1 in itab
'This is the title of column1' to col_wa-title ,
'LEFT' to col_wa-horizontalalignment .
append col_wa to col_control_tab .
clear col_wa .
move: '8' to col_wa-columnname , " field name of column8 in itab
'This is the title of column8' to col_wa-title ,
'LEFT' to col_wa-horizontalalignment .
append col_wa to col_control_tab .
the finally
<htmlb:tableView id                  = "tv1"
                       design              = "ALTERNATING"
                       selectionMode       = "MULTISELECT"
                       onRowSelection      = "MYROWSELECTION"
                       table               = "<%= flights %>"
                     columnDefinitions   = "<%= col_control_tab %>"
Regards
Raja

Similar Messages

How to hide fields in Table maintenace screen

I have created a view with table maintenance generator. I would like to hide some fields. With event I am able to fill in those fields but I want to hide those from screen.

HI,
This is reff with ur below post, I have been stuck with same problem,
I got your code, how its functioning, but didn't get get where i have to write it.
plz tell me in brief.
Thanks in Advance.
Regards
Vivek
Re: How to hide fields in Table maintenace screen
Posted: Feb 6, 2009 11:42 AM   in response to: Aarti Ramdasi in response to: Aarti Ramdasi
Click to report abuse...             Click to reply to this thread      Reply
Hi,
You can hide the fields like this..
For example
select-options:
s_carrid for spfli-carrid modif id gr1,
s_connid for spfli-connid modif id gr1,
s_cityto for spfli-cityto modif id gr2.
I am going to hide last fied..To do this
at selction-screen output.
if s_carrid is initial or s_connid is initial.
loop at screen.
if screen-group1 CS 'GR2'.
screen-active = 0.
modify screen.
endif.
endloop.
endif.
whenever u click on any one of the field i.e. carrid or connid the third field will displayed.Otherwies the last field cityto is not visible initially
Regards
Kiran

How to Hide Row in table view depend on condition

Dear Friends,
Please any one suggest how to do hide some rows in table depend on condtions.
My Issue is :
I have table with binding componant context controller, with in that some rows are no need to disply in my table, I tried to delete that entities from collection wrapper in do_prepare_output. but that entites are perminatly deleted from model node.
how can achive this with out delete entities from model node and hide some rows in table view.
thanks & Regards

Hi Andrew,
Please can you explain alobrate, because i wont' found that method in my implimentation and it's table config like follow
<% IF attr->check_consistency( ) eq abap_true. %>
    <chtmlb:configTable xml="<%= lv_xml %>"
                         id="TextList"
                         navigationMode="BYPAGE"
                         onRowSelection="select"
                         table="//Text/Table"
                         width="100%"
                         selectedRowIndex="<%=Text->SELECTED_INDEX%>"
                         selectedRowIndexTable="<%=Text->SELECTION_TAB%>"
                         selectionMode="<%=Text->SELECTION_MODE%>"
                         usage="ASSIGNMENTBLOCK"
                         visibleRowCount="3"/>
<% ENDIF. %>
thanks & Regards
Ganesh

How to hide fields in table maintenance generator dynamically.

Hello Experts,
                     I have one requirement and that needs to do dynamically display the fields in table maintenance generator based on the selected radio button.I have written the code in pbo but it is not working properly,can anyone figure me out in this.
Thanks,
Vinod Bhaskar.

Hi vinod
     when you are creating tmg , you will specific a function group name and sap generate a func group which contains that tmg . you can view in se80 , specifying function group name. In that , screen contains single screen 100 or two screen 100,200 .
     screen you can create module in pbo .u can find all field name in that screen.
    loop at screen.
   if screen-name = ''.
   screen-visible = 0.
   endif.
   modify screen.
   endloop.
regards,
vijay.

How to create variant for table/view ?

Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Gu

hi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
       1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
       2.      On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
       3.      Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
       4.      If there is more than one selection screen, select the screens for which you want to create the variant
5.      Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
       6.      Enter the desired selection values, including multiple selection and dynamic selection.
       7.      Choose Continue.

How to hide fields in UIX form

Hi
I need to update the table with last_updated_by and last_updated_date every time if any change to the record. But I do not want to show these 2 fields on the screen.
Could you help me how to hide fields in UIX form/any procedure to insert the data to database with out placing them in the screen .
Thanks in advance.
NRK

Now that you mention it ... the rendered flag will stop the field from being rendered. So it's not even in the page. Stupid me.
Have a look at formValue. These are rendered, but invisible fields in a form. That should do it (hopefully).
In prepareForDML() you could simply call the setter of your date attribute that stores the date of the last update. There you pass the current date, or you could fetch the sysdate from the database and pass that. If you go that way, then the EntityImpl could make these adjustments automatically when inserting or updating and you wouldn't even need these fields/bindings in your UIX page.
Just check what the operation is, and if it's an update or insert then call the setters of the attributes you want to update. Then call super.prepareForDML(). Something like that.
It all would happen in the middle-tier, client not involved.
So formValue should work, and the prepareForDML() stuff should also work. Don't know which way you want to go.
Sascha

Adding custom fields to table view assignment block

Hi All,
I want to add two news fields to 'Service Contract Item Level' in 'Object List' assignment block. How can i add these two custom fields to table view assignment block using AET. I have tried to add new fields using AET but there is no business object supports to my requirement.
Thanks & Regards
Nitish

Hi Nitish,
As naveen sadid use Cutomer_i object . I guess it will be more appropriate.
And following link will be helpful for AET creation.
CRM 7.0 How to --4 Adding Custom Fields With The New Application Enhancement Tool (AET)
Regards
Loks

How to disable fields in Table control???

Hi
How to disable fields in Table control??? I want to disable particular row in table control when enter datas are correct.lets take as example ME41 or ME51 table control.
Can anyone tell how to do disable in this table control
Points will be rewarded if its helpful.
Thanks
senthil

If you want to disable the row then you can use
in pbo module create a module in side loop,
loop at itab with control tc.
module change_screen.
endloop.
in module,,,,,
loop at screen.
if condition.
screen-input = 0.
modify screen.
endif.
endloop.
Regards
Vijay

How to update field in table FAGLFLEXA/FAGLFLEXT

Hi Gurus,
     we are stay in ECC 5.00. The new g/l have activated but we have not assigned the relevant scenario to the ledger (Refer note no 990612)
     now we have assinged following field:
     FIN_CCA: RCNTR (Cost center), SCNTR (Sender cost center)
     FIN_CONS: RASSC (Trading partner), RMVCT (Transaction Type)
     FIN_GSBER: RBUSA (Business area), SBUSA (Trading partner's business area)
     FIN_PCA: PRCTR (Profit Center), PPRCTR (Partner Profit Ctr)
     FIN_SEGM: SEGMENT (Segment), PSEGMENT (Partner segment)
     FIN_UKV: RFAREA (Functional Area), SFAREA (Partner Functional Area)
     our problem is the data was posted before that does not update fields in table FAGLFLEXA/FAGLFLEXT,How to update field in table FAGLFLEXA/FAGLFLEXT?
Thanks,

Hello Jenjira,
Since this was a question asked few years back, I think you can share your experience with activation of a Scenario subsequent to Go-Live of new GL functionality (We are contemplating activation of one more scenario for Functional Area updation in new GL. 4 update scenarios were activated at time of New GL Implementation 4 years ago).
Please share following:
1. Impact of this subsequent activation on Open documents in the live system.
2. How you addressed the issues arising on Point 1.
3. Any support that you got from SAP Support Team on issues thereof.
Any inputs will be of great help.

How to hide the Columns and Views for Login user in SharePoint 2013

Hi Friends,
How to hide the Columns and Views for Login user in SharePoint 2013? Is it possible using OOB features? If not possible how can we hide the Columns and Views for Login user?
Could you please help on this.
Thanks,
Tiru
Tiru

Hello Tirupal,
There is no OOB way to do this.
Please check this codeplex solution to achieve the same.
https://sp2013columnpermission.codeplex.com/
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Modify screen in VA41 : How to hide field in userexit_field_modification

Hello,
How to hide field at item level only (User should not be able to edit this field) in userexit_field_modification, instead of hiding the complete column.
If I use
FORM USEREXIT_FIELD_MODIFICATION.
IF screen-name = 'RV45A-MABNR'. " Material
SCREEN-required = 0.
ENDIF.
ENDFORM
the complete material column will be greyed out. I want to grey out only for some items.
Thanks,
AP

Hi AP,
You havent given MODIFY SCREEN after screen-required = 0.
Please try it abd check.
FORM USEREXIT_FIELD_MODIFICATION.
IF screen-name = 'RV45A-MABNR'. " Material
SCREEN-required = 0.
MODIFY SCREEN.
ENDIF.
ENDFORM
Regards,
Pawan

HOW TO HIDE FIELDS IN A CUSTOM TABLE

Hi all,
I've a requirement where there's a maintainence view attached to a custom created table. Whenever I add new entries via View, on saving the record, 2 of its fields only should appear.
For example, if my table looks like this,
SAP ID OBJECT ID FROM DATE TO DATE
Once i add a new record, when i press save, only 2 of fields say, SAP id and Object Id should appear instead of all the fields.
Can someone throw light on this if you're aware? Any input in this regard will be highly valuable to me and appreciated. If someone is unable to intrepret this question, do let me know, I'll detail it again.
Thanks in Advance,
Vaishnavi Varadarajan

hi Vaishu,
Hide parameter / select option in selection screen
We can Hide parameter / select option in selection screen dynamically by manipulating screen object.
SCREEN is like an internal table with a header line. However, you do not have to declare it in your program. Go to debugging mode and then view structure of screen.
You can modify SCREEN in your ABAP program during the PBO event of a screen. Its contents override the static attributes of the screen fields for a single screen call. The only statements that you can use with SCREEN are:
LOOP AT SCREEN.
MODIFY SCREEN.
ENDLOOP.
We can hide parameter by set screen-active to 0.
Here is example of how to hide parameter in selection screen. Write it, and change click on radiobutton to hide parameter.
REPORT ZAALGAL0006.
DATA: d_ucomm LIKE sy-ucomm.
PARAMETERS: p_grpa1(10) MODIF ID A,
p_grpa2(5) MODIF ID A,
p_grpb1(2) MODIF ID B.
PARAMETERS: p_actA RADIOBUTTON GROUP rad1 USER-COMMAND ACT DEFAULT 'X',
p_actB RADIOBUTTON GROUP rad1.
AT SELECTION-SCREEN.
d_ucomm = sy-ucomm.
AT SELECTION-SCREEN OUTPUT.
LOOP AT screen.
IF p_actA = 'X'.
IF screen-group1 = 'B'.
screen-active = 0.
ENDIF.
ELSEIF p_actB = 'X'.
IF screen-group1 = 'A'.
screen-active = 0.
ENDIF.
ENDIF.
MODIFY screen.
ENDLOOP.
START-OF-SELECTION.......
pls refer the below sites for reference. they may help you
http://www.blogtoplist.com/software/blogdetails-14026.html
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html
https:/.../servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/905e3d36-0301-0010-30ac-b55865545635
thanks
sagar
reward me points if usefull

How to Hide fields at Costing2 in Material Master

Dear Experts,
One of my requirement is, i want to hide 3 fields in Material Master costing2 tab. The fields are Planned Price1, Planned Price2, Planned Price3.
Can any one guide me how to hide those fields through SPRO. Otherwise how to approch this requirement?
Thanx and Regards,
Mohana

Hi,
My requirement is, Customer dont want Planned price1, planned price2 and planned price3 in costing tab2 in Material Master. They required this 3 fields with 7 more fields in one more tab.
So our Tech consultants are created one more view next to costing tab2. They made the remaining 7 fields into 'Z' table and these 3 fields i need to move from Costing tab2 to costing tab3.
Kindly help how we need to achive this.
Mohana

How to hide fields in Infotype 16 for Molga 28

Hi Guys,
I need to hide some fields for IT0016 for Molga 28. Earlier we have assigned different screen for this molga .But now we have assigned the standard screen to IT0016 i.e. View-3211. But when i go to node Change Screen Modifications, i m unable to find MP321100. I have checked through PA30 for chinese employee the Program is MP321100 and screen is 2000.
COuld you guide how to hide some of the fields for Chinese Molga 28 in IT0016.
Regards,
Navneet

Hi Harish,
I havent got the chance to check with BASIS yet....they are lil busy .....meanwhile i have created an entry in t588m with Module pool mp321100 and feature p0016. As u told i have created entry with Molga 28 and return key 28 in P0016 feature.
Could you confirm that i need to Create mP321100 or i could have done it via mp001600 as told by other guy.
And now if i go the fields are hidden except for two fields which strangely are coming "ER Notice Period" and
"EE Notice Period". I have hidden all fields still these two fields are cming any idea why?
Regards,
Navneet

How to create links in table view

Hi
I am working in IC WebClient.
Can any body guide me how to create link on particular column of the table view and How can we navigate to another page by clicking on this link ?
I am filling the internal table (for table view) by z tables. I do not have context node for that.
Points will be rewarded.

use Iterators. In the itarator you can create any BSP Object you wish to.
in the method RENDER_CELL_START of the interface IF_HTMLB_TABLEVIEW_ITERATOR
METHOD if_htmlb_tableview_iterator~render_cell_start.
DATA: lo_text     TYPE REF TO cl_htmlb_textview,
        lo_link TYPE REF TO cl_htmlb_link,
        lv_link_click TYPE string,
        lv_link TYPE string,
        lv_dim   TYPE string,
        lv_pernr TYPE string.
FIELD-SYMBOLS: <dat> TYPE ANY.
lv_link = 'info.htm?pernr='.
lv_dim   = 'left=300,top=220,width=620,height=200,menubar=0,scrollbars=yes,resizable=no'.
row_ref = p_row_data_ref.
CASE p_column_key.
    WHEN 'PERNR'.
      CREATE OBJECT lo_link.
      lo_link->id            = p_cell_id.
      lo_link->text          = get_column_value( p_column_key ).
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
        EXPORTING
          input = lo_link->text
        IMPORTING
          output = lv_pernr.
      CONCATENATE `window.open('` lv_link lv_pernr `' , '` lo_link->text `', '` lv_dim `');` INTO lv_link_click.
      lo_link->text = lv_pernr.
      lo_link->onclientclick = lv_link_click.
      p_replacement_bee      = lo_link.
    WHEN OTHERS.
      CREATE OBJECT lo_text.
      lo_text->id       = p_cell_id.
      lo_text->wrapping = 'FALSE'.
      lo_text->text     = get_column_value( p_column_key ).
      lo_text->design   = 'STANDARD'.
      p_replacement_bee = lo_text.
ENDCASE.
ENDMETHOD.
How to use Iterators.
/people/brian.mckellar/blog/2003/10/31/bsp-programming-htmlb-tableview-iterator
Hope this helps.
Cheers
Amandeep
<i><b>Reward points for each helpful answer.</b></i>

How to hide fields in table view

Similar Messages

Maybe you are looking for