How to Hide Quert Statement

Dear Expert,
I Have a create a query, and add that query in My menu...problem is that my query statement is visible to all user....
I just want to hide my "select statatment..." from user so he cant make any change in it
even i try with read-only but concept is to hide ...non user can view my sql statement...is there any way...
Thanks
Kevin

Hi Kevin ,
This is the simple work around but it works :
When you write your query you enter multiple times so that you are writing not in first line but may be in seven or eight line .SAP default screen will show only upto couple of lines ,so user will not see your query .
However , it is not possible to let super user not access or hide completely who is able to see your query.Only option you can manage them through authoriation and security setting .
Hope this helps
Bishal

Similar Messages

HOW TO HIDE FIELDS IN A CUSTOM TABLE

Hi all,
I've a requirement where there's a maintainence view attached to a custom created table. Whenever I add new entries via View, on saving the record, 2 of its fields only should appear.
For example, if my table looks like this,
SAP ID OBJECT ID FROM DATE TO DATE
Once i add a new record, when i press save, only 2 of fields say, SAP id and Object Id should appear instead of all the fields.
Can someone throw light on this if you're aware? Any input in this regard will be highly valuable to me and appreciated. If someone is unable to intrepret this question, do let me know, I'll detail it again.
Thanks in Advance,
Vaishnavi Varadarajan

hi Vaishu,
Hide parameter / select option in selection screen
We can Hide parameter / select option in selection screen dynamically by manipulating screen object.
SCREEN is like an internal table with a header line. However, you do not have to declare it in your program. Go to debugging mode and then view structure of screen.
You can modify SCREEN in your ABAP program during the PBO event of a screen. Its contents override the static attributes of the screen fields for a single screen call. The only statements that you can use with SCREEN are:
LOOP AT SCREEN.
MODIFY SCREEN.
ENDLOOP.
We can hide parameter by set screen-active to 0.
Here is example of how to hide parameter in selection screen. Write it, and change click on radiobutton to hide parameter.
REPORT ZAALGAL0006.
DATA: d_ucomm LIKE sy-ucomm.
PARAMETERS: p_grpa1(10) MODIF ID A,
p_grpa2(5) MODIF ID A,
p_grpb1(2) MODIF ID B.
PARAMETERS: p_actA RADIOBUTTON GROUP rad1 USER-COMMAND ACT DEFAULT 'X',
p_actB RADIOBUTTON GROUP rad1.
AT SELECTION-SCREEN.
d_ucomm = sy-ucomm.
AT SELECTION-SCREEN OUTPUT.
LOOP AT screen.
IF p_actA = 'X'.
IF screen-group1 = 'B'.
screen-active = 0.
ENDIF.
ELSEIF p_actB = 'X'.
IF screen-group1 = 'A'.
screen-active = 0.
ENDIF.
ENDIF.
MODIFY screen.
ENDLOOP.
START-OF-SELECTION.......
pls refer the below sites for reference. they may help you
http://www.blogtoplist.com/software/blogdetails-14026.html
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html
https:/.../servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/905e3d36-0301-0010-30ac-b55865545635
thanks
sagar
reward me points if usefull

How to hide row in JTable?

Hi all,
How to hide some specific rows in JTable for user view filtering purpose?
Thanks

Try to use the Table Model.
The "getValueAt" Methode decide what to Display.
So a simple "if" command can hide the complete row - or a single Statement.
public Object getValueAt(int row, int col) {
ArrayList al = new ArrayList();
StueliTeil tabellenzeile = (StueliTeil) getDaten().get(row);
switch (col) {
case 0 :
return tabellenzeile.getUmfang();
case 1 :
return tabellenzeile.getTakt();
...

How to hide or do not show the receipt's name after miss called?

1. How to hide or do not show the receipt's name after miss called?
2. I do not want to show my message statement in the screen.

I have also registered to this forum to inform that the problem with showing the MAC-address in the sidebar of the finder is still not solved.
The strange thing is that the Embedded Web Server says:
"This specifies the Bonjour domain name assigned to the device, in the form <host name>.local. If a user-specified host name has not been assigned, the default host name HPxxxxxx is used, where xxxxxx are the last 6 digits of the LAN hardware (MAC) address. This option cannot be modified."
But I did assign a user-specified host name and that name does show-up everywere (also within Bonjour), except in the sidebar of the finder (hp###xx##x####). Lots of people have the same issue, when searching on the interet, but not one has found the solution.
Please help with solving this issues?

How to Hide JBO Exceptions in JSF Pages in ADF 10g

Hi All,
How to hide the JBO Exceptions in ADF 10g, for example JBO-27122: SQL error during statement preparation. I have been used the same customizing error handler which was specified in bcadfdevguide. But the method reportexception which will call disableappendcodes is not doing anything in my case.
I want to show some decent errors instead of JBO errors to the user, appreciate if you help me on this.
thank you.

Hi Jobinesh,
Thanks for the reply, actually i am looking to show the user our own customized error instead of JBO errors, i don't know whether the method skipexception will skip it or i can override it to show customized exceptions. and registering the customerrorhandler in databindings is different from registering the customphaselistener class in faces-config.xml which was usually done in 10g.
But in my case, even though i followed everything what was specified in dev guide, i am not getting the result. Hence this post in forums :)
Thanks.

How to hide the menus in Weblogic Portal?

I have to develop a page in Weblogic Portal 10.0 that uses a portlet for the UI presentation.
I have a requirement that the page is hidden by default. When I navigate to the page by selecting a link, I have to display the contents in that page. While displaying I should hide the portal level menus of other books/pages. But I have to display other contents like logo, etc.
Can some one please help me on how to hide the menus in the selected page?
Edited by: [email protected] on Apr 19, 2010 3:43 AM

As a quick and dirty solution i would edit the navigation jsps (singlelevel/multilevel/yourcustom menu jsp) and disable the navigation for all hidden pages.
Or create a backing file and dynamically change the navigation state on the desktop when the hidden page is requested.
Or have the page in a different portal file if possible and set the same header and footer there as well.
Or You could have a look at the detached portlets. These are used as popups often.

XCelsius Map component - how to hide mouse over region value?

Hi guys,
I have one problem with a map component:
Please open standard Xcelsius map sample: File -> Samples -> Map
If you turn your mouse to state, for example Alabama you will see "Alabama 31.66"
I need only "Alabama", how to hide this "31.66"?
I created colored map but user should not see the value, he should see just name of the map region
Any ideas?
Thanks in advance

Question answered
Option is on the Apperance - Text tab

How to Hide the Parameter field at run time....

Hi,
I have a parameter field which behaves differently depending on the User logged in.
It has the LOV coming from following SQL.
SELECT customer_name FROM Cust_mast;
If the user = 'INTERNAL' then the Where clause will be
WHERE cust_id in('DELL', 'SBC', 'BANK')
Else there will be no WHERE clause or the parameter field
should be hidden in the parameter form.
So my questions are:
1) How to hide the Parameter field during Run time?
OR OR OR
2) How to change the LOV select statement during Run time?
Thanks.
Ram.

Hi Ram,
Is there any way to play with the sql query SELECT using DECODE ?I'm not sure of this part, maybe someone else can suggest a way.
However, what you want can be done in 2 other ways:
1. Build 2 reports. Both reports will just be duplicates of each other, only difference being that the 'LoV where clause' will be different. Now you can fire the appropriate report in many ways. For example, if the customer is alreay logged inside your custom application, and therefore you already know whether the user is internal of external, you can design your button or link which launches the report to contain logic such that one of the 2 reports is fired depending on who the user is.
1. Use a JSP parameter form, not a paper parameter form In this case, just build an HTML parameter form in the web source of your report. Use Java logic to populate the LoV drop-down list. When you have to launch the final report, just launch the paper-layout of the report. For example (you will have to modify this):
<form action="http://machine:port/reports/rwservlet?report=ParamForm.jsp+..." name="First" method="post">
<select name="selected_customer" onChange="First.submit()" >
<option value="">Choose a Customer Name
<rw:foreach id="G_cust_id" src="G_cust_id">
<rw:getValue id="myCustId" src="CUSTOMER_ID"/>
<rw:getValue id="myCustName" src="CUSTOMER_NAME"/>
<option value="<%=myCustId%>"><%=myCustName%>
</rw:foreach>
</select>
</form>
In the code above, you will have to make sure that your report's data model defines 2 CUSTOMER_ID's (like CUSTOMER_ID_INT and CUSTOMER_ID_EXT). These 2 will be internal and external Cust ID's. Use Java logic to show one of them.
Navneet.

How to hide the fileds

how to hide the fileds in a form for one activity and how to display the same fields to another activity? in the same process
Edited by: jaya on Aug 9, 2010 10:07 PM
Edited by: jaya on Aug 9, 2010 10:40 PM

Inside of the screenflow, you can determine the name of the activity in an Autmatic task using logic like this:
myObject.activityName = Activity.nameThe use of upper case "Activity" in the above logic is correct for logic inside of an automatic task inside a screenflow.
This would let you use an if / elseif statement inside your presentation initialization method to hide or show the fields based on the activity's name. Note that this is actually the activity id. It is not the activity name you see in Studio that can be edited.
Dan

How to hide rows?

Hello folks,
I just would like to know that how to hide rows except dbms_rls package? I mean, it has been said that I can hide rows to create views but lets said that I have got 200 students and each student can see only their rows in students table, in that scenerio I have to create 200 views, isn't it? I just would like to learn that how to hide rows with using views? Do you have any ideas?
Note: I know dbms_rls package, except this solution I am tryin to find onather solution.
Thanks a lot.

Hi,
Polat wrote:
Hello folks,
I just would like to know that how to hide rows except dbms_rls package? I mean, it has been said that I can hide rows to create views but lets said that I have got 200 students and each student can see only their rows in students table, in that scenerio I have to create 200 views, isn't it? No! As you realized, that's not practical.
If every student is a separate Oracle user, the USER fucntion will return the name of the current user. A view definition can reference that function, like this:
CREATE OR REPLACE VIEW view_x
AS
SELECT   *
FROM    table_x
WHERE   student_account = USER;If you logged in to Oracle as POLAT, then the view will contain only rows where student_account='POLAT'.
If you logged in to Oracle as SYSTEM, then the view will contain only rows where student_account='SYSTEM'.
If students do not have thier own Oracle accounts, then they are probably authenitcated by some procedure in your package. That procedure can set a SYS_CONTEXT variable, or write data to a global temporary table, which you can then use instead of the USER function in view definitions.
Note: I know dbms_rls package, except this solution I am tryin to find onather solution.Why can't you use dbms_rls, or why don't you want to use it? It's a very powerful tool, and not vey hard to use.
I'm not saying there's never a good reason not to use dbms_rls; I'm just asking if you have one.
I hope this answers your question.
If not, give a specific example of what you want. Post CREATE TABLE and INSERT statements for some sample data for all tables involved. Identify 2 or 3 different students, and show what the contents of the view should be for each student, given the same sample data. If students do not log in to Oracle with their own usernames, then explain how you know which student is currently logged in.

How to execute sql statement under bat file?

I want to execute following statement
C:\>sqlplus /nolog
SQL> conn scott/tiger
SQL> select * from tab;
I know I can realize it as following test.bat and testdb.sql file
test.bat is follows:
sqlplus /nolog @testdb.sql
testdb.sql is follows:
conn scott/tiger
select * from tab;
Now I don't want to use sql file,I only want to use bat file,like follows:
test.bat is follows:
sqlplus /nolog
conn scott/tiger
select * from tab;
when I run test.bat,I find only sqlplus /nolog statement execute,the other statements don't execute.
1)I want to know whether there is a method to execute sql statement only by bat file without a sql file? How to realize it?
2)If I call sql file,how to hide passord of user? Because I don't want to other persons know scott password,if I use conn scott/tiger in testdb.sql,other person can see testdb.sql and know the password. Is there a good method to avoid?
Thanks!

I'm running *NIX, but works the same on Windows
bcm@bcm-laptop:~$ cat here.sh
sqlplus dbadmin/admindb << EOF
select count(*) from user_objects;
exit
EOF
bcm@bcm-laptop:~$ sh here.sh
SQL*Plus: Release 11.2.0.1.0 Production on Mon May 17 18:14:09 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
COUNT(*)
9
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
bcm@bcm-laptop:~$ Edited by: sb92075 on May 17, 2010 6:15 PM

How to hide the pricing conditions specified in pricing procedure of sd.

dear friends,
my situation is to hide the conditions specified in the pricing procedure. so that it is not viewed by the some users.can you please tell me how to hide the conditions. so some of the persons, who are having authorization to see the conditions , will be able to see the pricing conditions.
can you please suggest me how to do this.
regards,
g.v.shivakkumar

Authorisation issues viz. Role Impementations
Hide Condition Records Line Item & Header Wise from all the transactions QK / So / P.I. / Enquiry / Invoice etc. for specific user grps. - in CRETATE / AMEND / DISPLAY / REPORTS all
Only Display the fields
regards,
g.v.shivakkumar

How to hide some select-option of Logical Database in report?

How to hide select-option of Logical Database in report?eg . In Logical Database 'PNP' , my code is 'GET PERNR' , excute the report , select-screen is displayed . I want to hide some select-options , such as PNPPERNR-LOW .
Edited by: rongrong wang on Mar 26, 2008 9:31 AM

U need to write code in initialization as
initialization.
loop at screen.
if screen-name = 'PNPPERNR-LOW'.
screen-active = '0'.
modify screen.
endif.
if screen-name = 'PNPPERNR-HIGH'.
screen-active = '0'.
modify screen.
endif.
endloop.

In SQL Trace how to see which statement getting more time .

Hi Expart,
In SQL Trace (T-code ST05) . I am running the standard transaction . how to see which statement
running more time and less time . suppose one statement running more time so how resolve the
performance .
Plz. reply me
Regards
Razz

> The ones in 'RED' color are the statement which are taking a lot of time and you need to
> optimise the same.
No, that is incorrect, the red ones show only the ones which need several hundret milliseconds in one execution. This can even be correct for hard tasks. And there are lots of problem, which you will not see
I have said everything here:
SQL trace:
/people/siegfried.boes/blog/2007/09/05/the-sql-trace-st05-150-quick-and-easy
Go to 'Tracelist' -> Summarize by SQL statements', this is the view which you want to see!
I summarizes all executions of the same statement.
There are even the checks explained, the slow ones are the one which need a lot of time per record!
See MinTime/Rec > 10.000 microseconds.
Check all number of records, executions, buffer, identicals.
The SE30 Tipps and Tricks will not help much.
Siegfried

How to hide dynamic parameters values in the URL with Reports 6i

Hi,
I want to know a way of hiding the parameters values when asking for a report through the web.
Now I'm using the Reports 3.0.5.8 with a Cartridge defined in the Oracle Web Application Server 3.0.1.0.1. When you ask for a report with the parameters DESTYPE = cache and DESFORMAT = pdf, it is fully generated and in the Address or Location box of the browser, you can see http://webserver/cache/report.pdf (where cache is the virtual directory defined in the OWAS in which the .pdfs are cached). So, users cant see the Url used to generate the report.
Im trying to upgrade this configuration to Reports 6i with Cgi in a web server. I generate reports with no problems. The problem I have is I cant find how to hide the parameters values as before. I mean, when I ask for a report, once its generated I can see http://webserver/cgi-bin/rwcgi60.exe?server=ServerName&report=report.rdf&userid=user/pass@connection&destype=cache&desformat=pdf&P1=value1&P2=value2 in the Location box. It allows user to ask for another report changing the values of the parameters. I use these parameters to execute some query written in the Data Model. For example, imagine that the P1 represents the company id, the user (that is supposed to see only data of its company) can change this id, ask for a new report and see data of another company.
Ive already tried to use the key mapping option, but its not useful to me because the parameters values are dynamic and its impossible to define different entries in the cgicmd.dat for each possible value. The option of loading the parameter form before running a report is not useful to me either, because there exists specific screens for this purpose.
Is there any solution?
Thank you.
Marma Bonfiglio.

Hi Rakesh,
I am using BI 7.0
The last option I have is 'Hide' for 'Calculate single values as' .
I have the below options for 'Calculate single values as'
1. Normalise according to Next group level Resul.
2. Normalize according to Overall Result
3. Rank number
4.Olympic Rank Number
5.Maximum
6. Minimum
7.Counter for all detailed values
8.Counter for all detailed values that are non zero
9.Moving average
10.Moving average That is Not zero ,null or Error
11. Hide.
So could you please tell me where i can find 'suppress result' option for the keyfigure .
Many thanks

How to Hide Quert Statement

Similar Messages

Maybe you are looking for