How to I trigger an event based on the status of a pushbutton?

I am trying to trigger an event based on the ON/OFF status of a pushbutton. When I click the pushbutton to the ON position, I want the event structure in a loop to trigger on each iteration until the pushbutton goes back to the OFF position, either manually or programatically. Is there an easy way to accomplish this?
Many thanks.
Solved!
Go to Solution.

Well, lets read the original question:
diarmaede wrote:
I am trying to trigger an event based on the ON/OFF status of a pushbutton. When I click the pushbutton to the ON position, I want the event structure in a loop to trigger on each iteration until the pushbutton goes back to the OFF position, either manually or programatically.
I cannot see anything about "switch until released", only "click to ON" and "OFF manually or programmatically". That seems to be a plain switch action.
JHourigan wrote:
If I want to simply detect a button push event. I set the mechanical action of the boolean button to switch-until-released. Then I use the mouse down event structure on that button to detect the event. It avoids having to include a case structure logic to address the state of the boolean in an Value Change event structure. The button immediately returns to the false condition after release.
So far you are not dealing with the OFF handling at all, which seems to be a requirement. There must be more to it that you mention to get this working as intended. The value of the boolean needs to be constantly monitored anyway, so it might be difficult to do things without a case structure. I am still confused about the logic of it all ....
You should really include a small working example VI so we can see what you are talking about. Thanks!
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

How can we trigger an IDOC based on Orders creation.

Hiii...experts,
After searching alot in SDN i am taking this very commonly asked to experts in the hope of a better understanding.
If i create a sales order means.. i want to trigger a IDOC based on certain Condition on ORDER data .. how can we do this..
when ever i'm creating a sales order it should be automatically trigger a IDOC , Because when ever sales ordre was created in R/3 system it should be transferred to some destination...
And pls tell me about the reports that does the job of collecting required data from the sales order and converts it into a IDOC.
so, how can we trigger an IDOC based on Orders creation..
pls help.
Ram.

Use IDOC_OUTPUT_ORDERS for creating IDOC
you need to maintain condition records & output type
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 10, 2008 4:18 PM

How to configuration of pricing procedure based on the Region

Hi,
please help me how to configuration of pricing procedure based on the Region in the roll out project.
Thanks
mustafa

What I proposed to do was,
a. Create routes like 0 day route, 1 Day route, 2 day route etc.
b. Route determination is based on the Shipping condition of the customer. Put in the shipping condition for the customer as 00 - immediate delivery. 01 - By Truck, 02 - By Rail, 03 - Ship etc
c. Now, put in your route determination in such a way that routes change in the sales order with shipping condition (SC). Like, if the shipping condition is set to 00, then 0 day route comes up. Meaning immediate delivery, if SC is 01, then your normal route by truck picks up. etc.
When the sales order is manually created, you know the time of creation. As route is one of the criteria, the material confirmation happens based on number of days you put in the route to reach the destination. Now that you have the material available for today's delivery, the delivery program can be run to create it, or it can be manually created.
Now, when you configure the route you have to specify 'Transit duration in calendar days'.
When you have the sales order created electronically (say thru EDI), then, you may have to ask them to send in shipping condition. Else, you have to modify the function module Idoc_input_orders in such a way that if the sales order creation time is < 12 PM, then put shipping condition as 00, else copy what ever is there in the customer.
If you do not want to check the time manually when the user creates the sales order, then you may have to use the user exit MV45AFZZ (and I think you can use Save_order_prepare) to check the time and change the shipping condition. By this you will avoid extra coding in Idoc_input_orders and also need not bother if the user changed the route or not.
Hope my explanation helps.
Regards,
Mukund S

How do you make a event reoccur on the last weekday of every month?

How do you make a event reoccur on the last weekday of every month in lightning?
This can be done in outlook and lightning accepts and properly handles the event from a outlook user.

Hi,
It seems it cannot be done. You can add your vote to this bug report if you want to keep informed:
[https://bugzilla.mozilla.org/show_bug.cgi?id=390620 Bug 390620 - Event / Task recurrence options for "Last Working Day" and "First Working Day" of the month]

Can I Control Follow Up Transactions based on the Status ?

Hi,
I have created follow-up transaction (Quote) for main transaction Opportunity (this is custom defined transaction). I am able to create the follow-up transaction alright. However, now I would want to restrict the creation of follow up transaction based on the status of Opportunity. E.g if the Opportunity status is "Open" then I should not be able to create the follow-up transaction, wheras if the Opportunity status is "Won" then I should be able to create the follow-up transaction.
Any help will be highly appreciated.
Regards,
Diptendu

Write this restricting condition in COPY or OPPORT_H method of CRM_COPY_BADI. Raise an error message when status is not as desired which will stop the creation of follow up document. Do not forget to filter for transaction type i.e. process type. Also to make it exclusive for creation of follow up document (not code for copy control also), put some other condition checking docflow or something.

How can I trigger an event handler, based on a history dropdown select (onclick)

Hi
Firefox remembers user names and email addresses previously entered in text input fields. I wish to trigger an event-handler when an item has been selected.
Best regards, Jens Larsen

I figured out part of this. I had the event listener
listening to the spry select id, I set an id on the select and the
input lines and it's working correctly. Now I just have to push the
changes to the database.

How can I trigger an event from an ABAP Program

Hi everyone,
I have a requirement, where I have to create an ABAP program, that has to execute (trigger) an event which belongs to a Process Chain. when I run the program, the Process Chain has to run.
So, how can I do it?
Thanks for your help, Federico

HI ,
The program can call function module BP_EVENT_RAISE to raise the event. you can create vent in sm64 and sm62 .There you give the parameter of the event same as what you will define in the event of start variant of your process chian ..
Regards,
shikha

How do I set twice monthly events based on the week number

Greetings all. I can't seem to navigate this help system, so hopefully I'm not reasking something that's already been asked. But I have a problem with iCal that I just can't figure out of find an answer to. I need to create a twice monthly event, but it's based on the week number, not every two weeks. For example, I need to be able to create an event for the 2nd and 4th Mondays of the month. Is that possible with iCal? Thanks for your help... and not laughing at me
Steve

No problem.
Go to Monday select the day you want. Create new Event. Then select repeat and you will come up with how you want to repeate it. Select Monthly and then do the following:

How do you trigger an event within a program?

I have my event structure within a sequence and when it gets to the sequence where the events are, it waits there until there is an event and does not go to the next sequence. Is there a way to trigger an event structure within a program if no event occurs within a certain amount of time?

That's what the timeout event can be used for. Wire a value other than -1 to the timeout terminal. Wire the appropriate Boolean value from inside the event to terminate the while loop that the event structure is inside of.

Triggering a scheduled event based on the approval status

Hi,
I have created schedules for my project (one task and one milestone) with three phases(draft,approval,approved). The milestone is dependent on the task.Task is created for draft phase and milastone for approval phase
Now after creating the schedules when I have saved the project, even before i put my project in the draft phase the schedule is getting triggered and can be seen on the workbench in the events channel.
That means the schedules are getting triggered based on the date irrespective of the task or milestone being completed and also the schedule for a task needs to be triggered each time until the task is completed.
So now I want accomplish two things -
1. How can I trigger the schedule only when the user puts it in the draft phase or any required phase ?
2. How can I send a mail to the collaborator each day until he proceed the project to approved status and only on getting "approved" status the milestone schedule should be triggered.

Both would require scripting...
on phase change, add the required events
build a custom class that gets called nightly via scheduled task and searches through the projects meeting your criteria and sends them an email reminder.
-Howie Wexler
www.craftysystems.com

How to get PA30/0024 event inform. on the Attendee Training Hist. Report

In Training and Event management is the standard report S_PH9_46000431 "Attendees Training History available for getting an overview of the eventtypes and events followed or to be followed by an employee.
This reports shows only events en eventtypes linked to an employee by the PSV1 transaction. When an event is linked to a employee by PA30/0024 this is not shown on the report. Is this common sence or a bug in the software?
If it is a bug how to solve the problem?

Hi Paul,
Did u completed the custom program.......in which way u have approached.....please let me know coz i do have the same requirement

How do I move an event and keep the favorite clip selections?

Hi all,
I have to move several events from one external hard drive to another. On many of these events I've already started selecting favorite clips. When I moved my first event it erased my favorite selections. Not good. That took a lot of time and work. How do I move events and save the favorite clip selections within each event?
Thanks,
ggbeamer

It would be a good idea to learn iPhoto - the iPhoto '09 tutorials will help - and it would be a worthwhile investment of time to take the iphoto tutorials - http://www.apple.com/findouthow/photos/ - they are very helpful and will save you a lot of time and frustration. and there are iPhoto '11 tutorials under the help menu
A small investment of time now will save a lot of time and lost photos later
LN

How can i dynamically select columns based on the input parameter?

I have an input parameter which takes single numeric value.
Based on this value i have to dynamically select table-columns .
For eg: if i have following fields in my table :
SEM_1
SEM_2
SEM_3 and SEM_4.
And if i give numeric input as 2 , then i have to select "SEM_2" column only.
if the input is 3 then i have to select "SEM_3" only and leave the rest of the columns.
how do i achieve this dynamic feature in the "Select ..... From...... table...." statement in the ABAP??

Hi,
you should try something like this.
TYPES: cond(72) TYPE c.
data: condtab TYPE TABLE OF cond,
condw type cond.
data: lv_field(30) type c value 'SEM_'.
write p_num to lv_field+4(1).
condw = lv_field.
append condw to condtab.
SELECT (CONDTAB) FROM table INTO.....
Kostas
Message was edited by:
Kostas Tsioubris

How to split data into tables based on the entries in a column?

My problem is very similar to this thread: how to link data from one numbers sheet to another sheet, however I could get it to work the way described there. I have one big table for entering data (the first one). I would like to have a few other tables populated automatically based on the entries in one of the columns of the first table. In my example below I put everything in one sheet for clarity. The selection to the other tables is to be done on the column "fruit" in the first table. (second one is "oranges", then "apples" and then "pears" -- had to cut the width of my screenshot due to the limitations of Apple's forums).
Here is what it would look like, just cannot figure out how to make it happen automatically.
Tried also importing similar Excel example to Numbers, but the import did not work correctly.
Any help will be appreciated.
LD

Larry,
Here's an approach that I've used...
In the Purchases table, Aux column, the expression is:
=COUNTIF($A$1:A2, A) & "-"&A
Fill Down
This expression builds a string that identifies the item and the ocurrance of that item.
The Date column of the Summary tables, cell a3, contains:
=IF(ROW()-3<COUNTIF(Purchases :: $A,$A$1), LOOKUP(ROW()-2&"-"&$A$1, Purchases :: $F, Purchases :: B), "")
Fill Across, then fill down.
Regards,
Jerry

How to calculate Goods issue date based on the time of delivery

Hi SAP Gurus,
I seek your help/suggestion for the given scenario.
The user requires calculating the GI date based on time of delivery.
Based on the delivery priority (like Priority 1= Day 1, Priority 2= Day 2) maintained in customer master, the need is something like below-
1st case= If Retail Customeru2019s delivery orders received before midday (Noon cut off) require to be dispatched on same working day (Day 1)
Wholesaler customer delivery orders received before midday require to be dispatched by the next
Working day (Day 2 Including day of receipt)
2nd case= Retail customeru2019s delivery orders received after midday require to be dispatched by the next working day
Wholesaler customer delivery orders received after midday require to be dispatched by on day 3
Kindly suggest , how to proceed in this. I am new to SAP world so need ur help to tackle this.
Thanks a lot in advance for the valuable inputs.

What I proposed to do was,
a. Create routes like 0 day route, 1 Day route, 2 day route etc.
b. Route determination is based on the Shipping condition of the customer. Put in the shipping condition for the customer as 00 - immediate delivery. 01 - By Truck, 02 - By Rail, 03 - Ship etc
c. Now, put in your route determination in such a way that routes change in the sales order with shipping condition (SC). Like, if the shipping condition is set to 00, then 0 day route comes up. Meaning immediate delivery, if SC is 01, then your normal route by truck picks up. etc.
When the sales order is manually created, you know the time of creation. As route is one of the criteria, the material confirmation happens based on number of days you put in the route to reach the destination. Now that you have the material available for today's delivery, the delivery program can be run to create it, or it can be manually created.
Now, when you configure the route you have to specify 'Transit duration in calendar days'.
When you have the sales order created electronically (say thru EDI), then, you may have to ask them to send in shipping condition. Else, you have to modify the function module Idoc_input_orders in such a way that if the sales order creation time is < 12 PM, then put shipping condition as 00, else copy what ever is there in the customer.
If you do not want to check the time manually when the user creates the sales order, then you may have to use the user exit MV45AFZZ (and I think you can use Save_order_prepare) to check the time and change the shipping condition. By this you will avoid extra coding in Idoc_input_orders and also need not bother if the user changed the route or not.
Hope my explanation helps.
Regards,
Mukund S

How to I trigger an event based on the status of a pushbutton​?

Similar Messages

Maybe you are looking for

How to I trigger an event based on the status of a pushbutton?