Can I Control Follow Up Transactions based on the Status ?

Hi,
I have created follow-up transaction (Quote) for main transaction Opportunity (this is custom defined transaction). I am able to create the follow-up transaction alright. However, now I would want to restrict the creation of follow up transaction based on the status of Opportunity. E.g if the Opportunity status is "Open" then I should not be able to create the follow-up transaction, wheras if the Opportunity status is "Won" then I should be able to create the follow-up transaction.
Any help will be highly appreciated.
Regards,
Diptendu

Write this restricting condition in COPY or OPPORT_H method of CRM_COPY_BADI. Raise an error message when status is not as desired which will stop the creation of follow up document. Do not forget to filter for transaction type i.e. process type. Also to make it exclusive for creation of follow up document (not code for copy control also), put some other condition checking docflow or something.

Similar Messages

  • Can I control a network of Macs across the internet with ARD?

    Hi,
    Can I control a network of Macs across the internet with ARD?
    I seem to only be able to control one mac at a time. Am I missing something?
    Thanks
    Matt

    To be able to connect to a workstation from outside it's network, the ports that ARD uses must be open on both ends of the connection. ARD uses ports 3283 and 5900 so those must be open.
    If your workstations get their addresses from an NAT device rather than being "real", the ports also need to be forwarded in the router to the workstation's internal IP address. ARD uses port 3283 for the reporting and updating function, so if your Macs are getting their IP addresses through NAT, since you can only forward a port to a single workstation, you can only get reports, push package/files to etc. for a single workstation.
    ARD uses the VNC protocol for observation and control, though, and there are a range of IP addresses for that protocol, starting with 5900. ARD uses 5900 by default, so that port would be forwarded to the first workstation. You would, I believe, need to install VNC servers on the systems (since the ARD client cannot listen on any port other than 5900 while VNC servers can be set for other ports such as 5901, 5902, etc. You would then forward 5901 to the second workstation (and on to 5902, 5903, etc.). You can then use the following information:
    Remote Desktop: How to specify a port number for a VNC client
    to connect.
    The only other options are: 1) to run the ARD administrator on a workstation on the network, and then take control of that system from outside, either via VNC or another copy of ARD, or 2) set up a virtual private network (VPN) so that when you connect from outside, your admin system is officially part of the local network.
    Hope this helps.

  • Hello dps team,  A few weeks ago we renewed our dps licence. Now we want to release our newest issue but we can't. Following error message appears "At the attempt to release the folio creates an error. The process could not be started. Please try again la

    Hello dps team,
    A few weeks ago we renewed our dps licence. Now we want to release our newest issue but we can't. Following error message appears "At the attempt to release the folio creates an error. The process could not be started. Please try again later."
    Is there a problem with our dps version or any maintenance work at the servers from Adobe?
    Best,
    Oliver

    Hi Oliver,
    Please login to your DPS dashboard and contact support by clicking "Contact support" at the bottom left
    Thanks
    Lohrii

  • Error : Predecessor transaction ID  has the status 'incorrect' .

    Hi Experts,
    We are getting this error when try to create Activity from Account application( from activity tab page in account) in PCUI. But the same thing is working fine in at GUI level & Activity application in PCUI also & actions profile assigned to Activity transaction is also working fine at GUI level & activity application in PCUI.. But in Account application it is throwing this below error.
    Error: The predecessor transaction ID  has the status 'incorrect' .
    Detials of the error:
    Diagnosis
    You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
    System Response
    The follow-up transaction is not created.
    Procedure
    Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
    Pls suggest solution for this.Helpful answers would be rewarded max points.
    Thanks in Advance.
    Regards,
      Charu

    Hi Charu,
    Did you fix this message, can you please share your solution,  i have the same message appreaing.
    Many thnaks
    Raj.D

  • In transaction code BBP_PD the status of the workitem is not updating showi

    Hi Gurus,
    We have implemented N-Step BADI BBP_WFL_APPROV_BADI For Approvals Levels in SRM.
    Work flow is triggering correctly and workitem is sent at all the levels. But in transaction code BBP_PD the status of the workitem is not updating showing the error message "NO WORKITEM FOUND" also status is not updating in BBP_PD.
    Please reply with your suggestions.
    Thanks in advance.
    Madhukar

    Hi
    Thanks for your reply.
    We are getting "No workitem found" status in BBP_PD transaction. But all approval process is happening perfectly and when we check status through "Status Monitor " through web it is updating correct status.
    Status is updating in BBP_PD .Status of main workflow is displaying correctly and approval levels and corresponding approver names are displaying correctly, but only the status and time of approval is missing.
    can you suggest something on this issue.
    Workflow Item:                                                                               
    Workitem-ID        000002009126                                                                               
    Task                      WS90000040                                                                               
    Text                       Shopping Cart Approval N-Step 185522 (BADI)                                                                               
    Status                    STARTED                                                                               
    Statustext              In Process                                                                               
    Date                      09/24/2008                                                                               
    Time                     08:18:09                                                                               
    Node ID            Agent                    User                         State        Workitem       Created at                   
    0040000000      Kotesh APP       APP_KOTESH          No workitem found                                                  
    0040000002                                                                    No workitem found                                                  
    0040000001      shiva APP         APP_SHIVA               No workitem found                                                  
    0040000004                                                                    No workitem found                                                  
    0040000003     shiva APP         APP_SHIVA               No workitem found                                                  
    0040000006                                                                   No workitem found                                                  
    0040000005      SM1                 NNA_FA_SM_1         No workitem found                                                  
    0040000008                                                                   No workitem found                                                                               
    Regards
    Madhu

  • How can I automatically scale a table based on the page size?

    I have multiple tables within 100s of pages of an InDesign file and when I use the liquid layout to scale the content of the pages based on the size, the tables stay the same. I've searched for a while now and can't come up with anything other than going in and manually doing it - which I don't have the time to do.

    You probably haven't activated the layout adaptation (I'm on german ID, don't know the correct name for it in English) in the mini menu of the Liquid Layout panel.

  • Can JMS Message be filtered dynamically based on the JMS Header variable

    Hi All,
    We have a requirement to filter messages from an MQ (Queue) using the JMS Adapter.
    There is only one subscriber to this Queue.
    Can we use the Message Selector option using the same subscriber to pick different messages based on the context set.
    For example I have two BPEL instances running for the same BPEL process and both of them have to read messages from the same MQ Queue, say SampleQueue.
    The first BPEL instance need to pick the messages when JMSpriority = 1
    The second BPEL instance should pick the messages when JMSpriority = 2
    Is this possible? As the Message Selector in the examples given is expecting a literal on the right side of the expression.
    Ex : Country='UK' Color='Green' etc
    To put the question in a different way, can the right side of the expression in a message selector be a BPEL variable?
    Thanks

    Hi
    I have the same question. Basically, I want to match my response message with the request message. I am putting in an id in JMSCOrrelationID in the request. The applciation that send the response put the COrrelationId, I sent into the JMSMessageId. But now, I want to correlate my request and response? What is the best way to do this in BPEL?
    Can the right side be a variable? I want to say JMSMessageID = 'ID: ' + JMSCorrelationId.

  • Can I generate a DSC alarm based on the difference of two signals?

    In the Tag Configuration Editor of the DSC module, you can set lower and upper limits on any signal (tag). This works well if the signal is expected to always be within a certain range. However, if the signal is expected to vary according to a predefined pattern, how can I detect when it passes out of the expected pattern? - In my case the problem is made easier since I have two signals I can monitor: a setpoint and an actual. Therefore I can calculate the difference between setpoint and actual and set an alarm if the difference exceeds some maximum value. However, the DSC tag configuration editor does not allow these kind of "derived channels".
    One possible solution is to run LabVIEW code to mon
    itor these signals in real time, continually calculate the difference and generate an error if the difference exceeds the limit I have set. The problem is there does not seem to be a way to programmatically generate a DSC alarm.
    Another possible solution, but requiring more work, is to create my own VI-based server to monitor the derived channels. Then there would be two servers running - logos to acquire the FieldPoint data- and my VI based server to calculate the derived channels in real time. My question is: Is there an easier way to do this?

    Hi Chris,
    Go with your first proposed solution -- and write the result to a Discrete Memory tag. And set this tag to alarm on High. This will now act as your alarm tag.
    Hope this helps.
    Regards,
    Khalid

  • Direct URL to open the Sales order transaction based on the Transacation ID

    Hi All,
               Please help me...
    When i click the below link then it will navigate to the sales order transacation.
    https://dev1crm...:18020/sap(bD1lbiZjPTIwMCZkPW1pbg==)/bc/bsp/sap/crm_bsp_frame/entrypoint.do?appl=CRMD_BUS2000115&blview=&analyze=X
    but my requirement is, now i have to create a differnet url for different transaction ID's.
    Let us consider few sales order transacation ID's :
    6500000001
    6500000002
    6500000003
    6500000004
    6500000005
    now i will  create a hyper link to these transaction id's  from the portal screen, and when ever user clicks on any of these transaction id, then i should navigate to the sales order transaction by showing the details about this transaction id.
    Please do suggest me how to handle this.
    Thanks in advance.
    anil

    Hi,
    I got the solution,
    append this string to the URL
    &crm_object_id=4603D4CDF5950535E100000082974D14
    4603D4CDF5950535E100000082974D14 --- Guid.
    Thanks,
    Anil

  • Can't open mail on Facebook, can't write more than 2 lines in the status on Facebook and there are no "older posts" showing on Facebook

    This is regarding Facebook: I can no longer open mailbox to receive or send. The result is a white page with the Facebook index on the left. I can no longer write more than 2 lines in status updates. Lastly, the "older posts" that is usually at the bottom of the page is no longer there. Incidentally, all these things work in IE. There's nothing in Facebook referring to these issues except to say it doesn't support Firefox 3.6.8.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Enter the name of the crashed application or process (Finder) in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • How to I trigger an event based on the status of a pushbutton​?

    I am trying to trigger an event based on the ON/OFF status of a pushbutton.  When I click the pushbutton to the ON position, I want the event structure in a loop to trigger on each iteration until the pushbutton goes back to the OFF position, either manually or programatically.  Is there an easy way to accomplish this?
    Many thanks.
    Solved!
    Go to Solution.

    Well, lets read the original question:
    diarmaede wrote:
    I am trying to trigger an event based on the ON/OFF status of a pushbutton.  When I click the pushbutton to the ON position, I want the event structure in a loop to trigger on each iteration until the pushbutton goes back to the OFF position, either manually or programatically.
    I cannot see anything about "switch until released", only "click to ON" and "OFF manually or programmatically". That seems to be a plain switch action.
    JHourigan wrote:
    If I want to simply detect a button push event. I set the mechanical action of the boolean button to switch-until-released. Then I use the mouse down event structure on that button to detect the event.  It avoids having to include a case structure logic to address the state of the boolean in an Value Change event structure. The button immediately returns to the false condition after release.
    So far you are not dealing with the OFF handling at all, which seems to be a requirement. There must be more to it that you mention to get this working as intended. The value of the boolean needs to be constantly monitored anyway, so it might be difficult to do things without a case structure. I am still confused about the logic of it all ....
    You should really include a small working example VI so we can see what you are talking about. Thanks!
    LabVIEW Champion . Do more with less code and in less time .

  • Kindly let me know the transaction for checking the Status of par.User?

    Kindly let me know the transaction for checking the Particular Users Status?
    I mean to say,Which Transaction is he into?
    Or Is he/She Logged on to a particular System?
    Regards,
    Shashank.

    Hi,
    Go to Transaction SM04.You will find the List of Users And the List of transactions ther are currently using.
    Regards,
    Sujit

  • Can not create follow up transaction FS Quotation from Lead in Interaction

    Dear All,
    We have requirement wherein IC agent should be able create FS Quotation (Transaction type FSO1) from Lead transaction type in WEB UI.
    I have made all the necessary cutomization for copy control. FS Quotation is also maintained for all chanel.
    Its work fine in CRM Online. I can create FS Quotation from Lead transaction type but in WEB UI when I click on Follow up button from Lead transaction pop will appear but I can not see FS Quotation in pop up window.
    What I found after investigation is that transaction type with Financial Contract as Leading business category can not be available for follow up from Lead in web ui but available in CRM online. When I change the leading business category to another one same transaction type can be seen for Follow up from Lead in web ui.
    Please let me know if you have any suggestion or faced similar kind of issue.
    Regards
    Pankaj Vispute

    Hello Pankaj,
    Yes, I have discovered this behavior as well. It seems to be documented in SAP Note 1172066. Apparently only the four following category classes are allowed:
    'A' : Interaction Log 
    'F' : Appointment     
    'G' : E-Mail          
    'H' : Task            
    Best regards,
    John

  • Can not create follow up transaction FS Quotation from Lead in WEB UI

    Dear All,
    We have requirement wherein IC agent should be able create FS Quotation (Transaction type FSO1) from Lead transaction type in WEB UI.
    I have made all the necessary cutomization for copy control. FS Quotation is also maintained for all chanel.
    Its work fine in CRM Online. I can create FS Quotation from Lead transaction type but in WEB UI when I click on Follow up button from Lead transaction pop will appear but I can not see FS Quotation in pop up window.
    Please let me know if you have any suggestion or faced similar kind of issue.
    Regards
    Pankaj Vispute

    Hello Pankaj,
    Yes, I have discovered this behavior as well. It seems to be documented in SAP Note 1172066. Apparently only the four following category classes are allowed:
    'A' : Interaction Log 
    'F' : Appointment     
    'G' : E-Mail          
    'H' : Task            
    Best regards,
    John

  • How can I select and delete rows based on the value in one column?

    I searched through the discussion board, and found a thread on deleting blank rows, but not sure how to modify it to work with my issue.
    I have put together a rather complicated spreadsheet for designing control systems, it calculates parts needed based on check boxes selected in a second spreadsheet.
    Since not all systems require all parts there are many rows that have a 0 quantity value, I would like to select these rows and delete them once I have gone through the design phase (checking off required features on a separate sheet).
    I like the way the other thread I found will gather all the blank rows at the bottom without changing the order of the rows with data in them.
    I don't understand exactly how the formula in the other thread works well enough to modify it to look for a certain column.
    I hope I made myself clear enough here, to recap, I would like to sort the rows based on a zero value in one (quantity) column, move them (the zero quantity rows) to the bottom of the sheet, and then delete the rows with a zero quantity (I can delete them manually, but would like to automate the sorting part).
    Thanks for any help anyone can provide here.
    Danny

    I apologize but, as far as I know, Numbers wasn't designed by Ian Flemming.
    There is no "this column will be auto-destructing after two minutes"
    You will have to use your fingers to delete it.
    I wish to add a last comment :
    if your boss has the bad habit to look over your shoulder, it's time to find an other one.
    As I am really pig headed, it's what I did. I became my own boss so nobody looked over my shoulder.
    Yvan KOENIG (VALLAURIS, France) mercredi 13 juillet 2011 20:30:25
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Maybe you are looking for