How to identify current row in table from selectOneChoice compact mode

Hi,
I have an af:table in which one of the columns is selectOneChoice in compact mode.  Upon selecting item in this selectOneChoice, valueChangeListener is triggered and do some work based on that row.  However, my issue is that it's hard to identify the current row since the selectOneChoice is in compact mode.  If the selectOneChoice is not in compact mode, when user selects item in selectOnechoice, selectionListener of af:table is triggered to identify the current row.  But if selectOneChoice is in compact mode, user is able to select from selectOneChoice and valueChangeListener is triggered before selectionListener of af:table is triggered.  Hence, not able to identify current row. 
As a not so ideal workaround, I tried to put the row identifier (in my case, it's DetailSeq) in shortDesc, and get it from there.  But users is complaining seeing this not user friendly in shortDesc/hintText.  I tried to put DetailSeq as the id of the selectOneChoice, but it didn't work (Cannot get Id of selectOneChoice in table)
<af:table>
  <af:column headerText="Action" id="c5" width="30">
        <af:selectOneChoice id="a${row.DetailSeq}" autoSubmit="true" valueChangeListener="#{viewScope.backing_requestOverview.onSelectAction}" label="Action" mode="compact" shortDesc="#{row.DetailSeq}">
            <f:selectItems value="#{backing_requestOverview.requestActionsMap[row.StatusUid]}" id="si333"/>
            </af:selectOneChoice>
    </af:column>
</af:table>
In the valueChangeListener:
  public void onSelectAction(ValueChangeEvent valueChangeEvent) {
RichSelectOneChoice actionChoice = (RichSelectOneChoice)valueChangeEvent.getComponent();
LOGGER.info("Short Desc: " + actionChoice.getShortDesc());
        LOGGER.info("Component Id: " + actionChoice.getId());
Any advice?
Thanks
-Mina

Hi,
what about using an f:attribute tag to add the "DetailSeq" to the component. Should work similar to the shortDesc but is invisible. You can then get this attribute value by its name among the component attributes
Frank

Similar Messages

  • How to set current row in table after use tab key on inputText

    Hello all,
    My first post .., I'm newbie in ADF and I will try to explain my problem.
    For the moment we use ADF 11g (11.1.1.4), in a jsff page I have a table with an inputText column.
    On the valueChangeListener of the inputText, I invoke a method in a viewScope bean which call an EJB method, make some services in the EJB on the line modified. After that I refresh the VO and the table (because others values on the line have been modified) and reset the focus on the same inputText modified by the user with javaScript because focus was lost after refresh.
    So far, everything works fine.
    When I use the arrow keys to change the selected row in the table, it's work fine (focus is still in the next or previous inputText), but if user try to use tab key to change the current line, the inputText on the next line have the focus but the current row of the table is not changed (I think it's normal).
    My question : how can I change the current row after tab key pressed in this case ?
    I don't know if it's really clear, not easy to explain, don't hesitate to ask more details.
    Thanks in advance.

    Frank Nimphius wrote:
    Hi,
    My question : how can I change the current row after tab key pressed in this case ?
    Use a client event to listen for the keyboard entry and intercept the tab. The use af:serverListener to call the server to set the rowKey on the table and issue a PPR for the table to re-paint
    See sample 11 on http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html#CodeCornerSamples
    to learn about how to use the client listener and server listener
    FrankHi,
    Thanks a lot for your advices, I used the client and server listener
    I used this code on the method call in order to change the selection after key tab pressed, I don't know if it can be easier, but it works.
              if (LOGGER.isDebugEnabled()) {
              LOGGER.debug("START changeSelectedRow");
              RowKeySet oldRowKeySet = myTable.getSelectedRowKeys(); // get oldRowKeySet
              if (oldRowKeySet == null) {
                   if (LOGGER.isDebugEnabled()) {
                        LOGGER.debug("oldRowKeySet is null");
                   return;
              RowKeySetImpl newRowKeySet = new RowKeySetImpl(); // The new RowKeySet use to change the selectedRow
              DCIteratorBinding bindingIterator = ADFUtils.findIterator(MY_ITERATOR);
              bindingIterator.setRangeSize(-1);
              // set the new index of the current row.
              int index = bindingIterator.getCurrentRowIndexInRange();
              if (index < bindingIterator.getAllRowsInRange().length - 1) {
                   index++;
              bindingIterator.setCurrentRowIndexInRange(index);
              // get the current row after changed the index
              Row currentRow = bindingIterator.getCurrentRow();
              if (currentRow != null) {
                   ArrayList nextLst = new ArrayList(1);
                   nextLst.add(currentRow.getKey());
                   newRowKeySet.add(nextLst);
                   // set the new selectedRow
                   myTable.setSelectedRowKeys(newRowKeySet);
                   SelectionEvent selectionEvent = new SelectionEvent(oldRowKeySet, newRowKeySet, myTable);
                   selectionEvent.queue();
                   AdfFacesContext.getCurrentInstance().addPartialTarget(myTable);
              if (LOGGER.isDebugEnabled()) {
                   LOGGER.debug("END changeSelectedRow");
    Best Regards
    Benjamin

  • How to import only rows of tables from from a dump file

    Good day,
    I have impoted a schema from a dump files with option rows=n,(accordingly it should import only structure of the tables)
    now i want to import rows for these tables in that schema. Kindly guide me how to do that. I have used below syntax for import.
    imp userid=system/manager@testdb fromuser=abc touser=abc file=d:\abctest\
    abc.dmp log=e:\abc15.log buffer=100000000 ignore=y constraints=n grants=n statistics=none rows=n;
    Any help willbe much appriciated.
    Regards
    Ansh

    Hi Sybrand,
    Thanx for the suggestion. Actually it is my fault that I had not explained the whole scenarion.
    Let me explain it one by one...
    (1) First i was importing a schema with rows=y option and I was getting some constraints error(can not insert NULL value in 'not null' column of some particular table) and import was unsuccesful.
    (2) Then i desided to import only structure of the tables in that schema, and later disabled that constraint which was creating the problem.
    (3) Now I m willing to import the data in these tables using that .dmp file, using rows=y, and this was my question if i m doing it in a right way or do i need to do some further step.
    Hope this time i have made picture more clear.
    Thanx a lot Hans and Sybrand
    btw no wall around so can't bang my head :)

  • How to identify migrated rows on a table

    Hi, folks,
    I'm wondering how to identify migrated rows on a table.
    I understand that ANALYZE generates data into CHAINED_ROWS. The Oracle document implies that this table has both CHAINED ROWS and MIGRATED ROWS. FYI:
    http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14231/general.htm#sthref1881
    But how can I tell migrated rows from chained rows.
    Thanks!
    Alex

    im also not looking to ExporttoExcel feature on ADF just copy all the records displayed on a table
    im also not looking to ExporttoExcel feature on ADF just copy all the records displayed on a table ,
    Hi you can set the property( exportedRows) of exportListener
    you can limit the number of rows to download
    chekout documentaion
    ADF RichClient API - af:exportCollectionActionListener

  • How to get current row data in table control

    Hi , expert ,
       I am professional in oracle ,  but  now I am a new guy in SAP ABAP .
    I  have a question in UI
    How to get current row data and click pushbutton  in table control  to open next screen ?
    I want to get the current data and open next screen to carry out detail detail .
    Thansk for all your suggestion .

    GET CURSOR LINE SY-CUROW .
      READ TABLE internal_table index SY-CUROW.

  • How to get Current row of ViewObject in the DoDML methode

    Hi all
    I have two ViewObject EmplyesView and DeptView
    How to get Current row of ViewObject DeptView in the DoDML methode of EmplyesView

    OK, we can play this game on and on...
    I'll ask for a use case (http://en.wikipedia.org/wiki/Use_case) and you don't give any info we don't already know. After an other 10 posts we probably know what you real problem is and can give you the advice which you could have gotten in the fist place.
    So please take some time and describe the problem as if you would ask your mother for help. Tell us how the data model is build and how the VO are related. Is there any input from an user involved? Which information from the other view do you need? How do you get to the doDML method? Is there a button in the ui involved?
    Timo

  • How to identify all the child tables referencing a master table

    Hi,
    How to identify all the child tables referencing a master table.
    Could you please help me...
    Thanks in advance...

    Hi!
    You may use this query:
    SELECT master.table_name, child.table_name
    FROM   user_constraints master, user_constraints child
    WHERE  master.table_name IN ('REGIONS')
      AND  master.constraint_name = child.r_constraint_name
    /yours sincerely
    Florian W.

  • Sql report, How to access current rows 6 columns data

    I have one page having page items & SQL report having 8 columns.
    First column of report is a link for editing.
    on clicking first column, that record gets displayed on page items, which are opn same page.
    Now my problem is i have used link column of report and set 3 page items value on click of link column.\
    But i need to set values for 2 more page items.
    I tried to create computation & process but not working. i am confused about which process point to select & whether onclick page gets submitted or not.
    I tried to write jscript but not succeeded. I dont know how to get current row id in jscript & different column values of current rowid.
    any help.

    Hi,
    Thanks for reply.
    in 5 items, first three are numeric and last two are timestamp fromtime, totime.
    as I mentioned earlier if i interchange 4 & 5 items i.e. now ITEM4 is totime & ITEM5 is fromtime
    and their values. I get value for totime & not for fromtime. all records contain values for all 5 columns. no null.
    So basically their is no problem in value or data, The only problem is whatever sequence is maintained first 4 items get value & 5th item remains blenk.
    Either I type all 5 ITEM NAMES in one Item name-value pair of link or use all three pairs, 5th ITEM remain blank.

  • How to display first row value returened from a query as checked as default in a report

    How to display first row value returned from a query as checked as default in a report
    Example
    Parameter 1
    Paramerter2
    ABD
    x(checked)
    Test
    DEF
    JMG
    Mudassar

    Hi Mudassar,
    The issue is caused by the order in which the parameters appear in the report data tab can be difference between our report execution and it failing. In other words, “Parameter2” is execution before parameter “A” due to this issue. We can adjust the parameter’s
    order to solve the issue.
    If “Parameter2” is parameter “A”, we cannot use that expression. Because fields cannot be used in report parameter expression, if we want to display the first value returned from a query as default value, we have to fill the “Specify values” text box with
    the specific value in Default Values dialog box.
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • How to get all rows in table to red using alternate rows properties option

    How to get all rows in table to red using alternate rows properties option

    Hi Khrisna,
    You can get all rows red by selecting the color red in the "Color" and "frequency" to 1 under the "Alternate Row/Column colors".
    I tried doing it and the colors freaked me out (all red) :-D
    Kindly tell me if im missing something.
    Regards,
    John Vincent

  • How to add empty rows in table in smart form

    how to add empty rows in table in smart form?
    plz help me regarding this
    send me ur queries to [email protected]

    You will need to add some extra rows to the internal table that your table is displaying.  Use a program node to append additional rows with a key but no argument.
    Alternaively a template may me more suitable for your requirement than a table.
    Finally, please do not include you e-mail address in your question.  Your question and the answers provided to it are for the benefit of everyone in the Community.
    Regards,
    Nick

  • Can we find the number of rows in table from the dump file

    Hi All,
    Can we find the number of rows in table from the dump file with out importing the table in to the database?
    Please let me know ,if any option is there.
    Thanks,
    Kumar.

    <s>Try to import with option SHOW=Y, that should skip the number of rows which are into a table from a dump file.</s><br>
    <br>
    Nicolas.<br>
    Oops, sorry, that doesn't show the number of lines...<br>
    Message was edited by: <br>
    N. Gasparotto

  • How to add a stand alone table from Physical layer to Business Model

    Hi,
    I have tables from 2 different database sources in my Physical Layer.
    My Business model currently uses only tables from one database. from my second database in teh physical layer I need only one table and that will be a stand alone table, to my Presentation layer.
    1. Does it have to go through my Business layer or can it be directly added to the Presentation layer. What are the steps?
    2. Can I restrict the permissions on that stand alone table only to the administrator?
    Thank you.

    1)create a view with single column using the sql (select 1 from dual) in physical layer and join it with the table using complex join in physical layer (1=1).
    Move that to BMM, set the column as key in both physical and bmm layer.
    2) You can restrict the access for the table presentation layer
    Double click the presentation layer table -> Permission -> there you can restrict the access by user or group
    Thanks,
    Vino

  • How to delete/drop all the tables from SQL Server Database without using Enterprise Manager?

    How to delete/drop all the tables from SQL Server Database without using Enterprise Manager?
    I tried using DROP Tables, Truncate Database, Delete and many more but it is not working.  I want to delete all tables using Query Analyzer, i.e. through SQL Query.
    Please help me out in this concern.
    Nishith Shah

    Informative thread indeed. Wish I saw it early enough. Managed to come up with the code below before I saw this thread.
    declare @TTName Table
    (TableSchemaTableName
    varchar
    (500),
    [status] int
    default 0);
    with AvailableTables
    (TableSchemaTableName)
    as
    (select
    QUOTENAME(TABLE_SCHEMA)
    +
    +
    QUOTENAME(TABLE_NAME)
    from
    INFORMATION_SCHEMA.TABLES)
    insert into @TTName
    (TableSchemaTableName)
    select *
    from AvailableTables
    declare @TableSchemaTableName varchar
    (500)
    declare @sqlstatement nvarchar
    (1000)
    while 1=1
    begin
    set @sqlstatement
    =
    'DROP TABLE '
    + @TableSchemaTableName
    exec
    sp_executeSQL
    @sqlstatement
    print
    'Dropped Table : '
    + @TableSchemaTableName
    update @TTName
    set [status]
    = 1
    where TableSchemaTableName
    = @TableSchemaTableName
    if
    (select
    count([Status])
    from @TTName
    where [Status]
    = 0)
    = 0
    break
    end

  • How to set the current row in table automatically when tabout from one row to next row

    Hi
    I'm using jdev 11.1.2.0.0
    How can we set the  row(in which row focus is)  as current row in the table?
    If we create a table with single row selection, then whichever row we select, that row becomes current row because of the selection listener(#{bindings.xxvo.collectionModel.makeCurrent}).
    Then if we do tabout from one component to another component in table and moved to next row, then the focus would be on another row .
    when focus is shifted from one row to another row, then how can we make the focused row as current row or selected row.
    Any suggestion would we appreciated
    Thanks.

    Add clientListener inside table component and set client listener type to dblClick with method as a JavaScript method name.
    <af:clientListener method="dblclk" type="dblClick"/>

Maybe you are looking for

  • Safari doesn't display pdf files

    When using Safari and trying to open a pdf file, all I get is a dark grey screen.  I am a new Safari user and am not sure what I am doing wrong.  Firefox never had issues.  HELP!

  • Is there a way to increase the size of the CIFS cache?

    I have a site which has a WAVE-574-K9 installed and the CIFS cache is currently running close to the maximum disk size. v The VB capability of the device is not currently required, so I would like to know if there is any way to free up the portion of

  • Importing data in obscure binary format into diadem

    Hi all, Lets assume that I have some data in a binary format which DIAdem can not automatically import into the data portal. One method I am aware of and used is to create a dataplugin in vbs which will then allow me to import this data. Recently I c

  • Cost centre tables

    Hi experts          In quality system , ihave loaded the date from ECC quality , but when iam doing the unit testing , by looking in to the Lookup , iam getting the Emplyee costcenter and Company Code are completetly different , so i want to check th

  • Error - Hostname too long during Netweaver install

    I get the following error while trying to install the Netweaver Developer Workplace: The name of this host is USATLICOVINGTO1 which is more than 13 characters long.  This is not supported for SAP server installations. Any ideas of what to do?